Univerzalni Sklep Kardanske Gredi nakup rabljenega (2.672)

Stanje: rabljeno, Propeller shaft, Cardan shaft, Universal joint - Cardan shaft: Universal joint, unused - Type / No.: 21001375 402027/201 7610AVA03 Njdpfjhgkg Tsx Agxscr - Shaft: Ø 30 mm - Square: 15 x 15 mm - Dimensions: see photos - Quantity: 4x universal joints available - Price: per piece - Overall dimensions: 276/55/H46 mm - Weight: 1.5 kg/pc.

Stanje: rabljeno, Propeller shaft, cardan shaft, universal joint Ncodshf Dzzjpfx Agxor - Cardan shaft: universal joint, unused - Type / No.: 21001375 402027/201 7610AVA04 - Square: 19 x 19 mm - Dimensions: see photos - Quantity: 8x universal joints available - Price: per unit - Overall dimensions: 360/70/H55 mm - Weight: 3.6 kg each

Stanje: rabljeno, Cardan shaft, drive shaft, universal joint - Cardan shaft: universal joint, unused - Type / Ref.: 21001375 402027/201 7610AVA10 Ncodjhf Dz Eepfx Agxer - Shaft: Ø 36 mm - Dimensions: see photos - Quantity: 15x universal joints available - Price: per piece - Overall dimensions: 120/62/H56 mm - Weight: 1.1 kg/each

Stanje: zelo dobro (rabljeno), Kardanska gred, kardan, križni zglob -Kardanska gred: križni zglob, neuporabljen Ncsdpfx Ajhf Dzpsgxer -Tip / št.: 21001375 402027/201 7610AVA09 -Gred: Ø 24 mm -Mere: glej fotografije -Količina: na voljo 4x križni zglob -Cena: na kos -Dimenzije: 102/46/H50 mm -Teža: 0,6 kg/kos.

Stanje: zelo dobro (rabljeno), Cardan Shaft, Driveshaft, Universal Joint - Cardan Shaft: Universal joint, unused - Type / No.: 21001375 402027/201 7610AVA01 Nedpfjhf Dzajx Agxscr - Shaft: Ø 36 mm - Square: 19 x 19 mm - Dimensions: see photos - Quantity: 5x universal joints available - Price: per piece - Overall dimensions: 165/70/H62 mm - Weight: 1.7 kg/pc.

Stanje: zelo dobro (rabljeno), Cardan shaft, universal shaft, universal joint - Universal shaft: Universal joint, unused - Type / No.: 21001375 402027/201 7610AVA02 Nodohf Dy Sjpfx Agxscr - Shaft: Ø 24 mm - Square: 15 x 15 mm - Dimensions: see photos - Quantity: 7x universal joints available - Price: per piece - Overall dimensions: 135/57/H46 mm - Weight: 0.8 kg/pc.

Stanje: rabljeno, Propeller shaft, cardan shaft, universal joint, center bearing, bevel gearbox - Cardan shaft: bevel gearbox, unused - Type / No.: 21001375 402027/201 7610AVA07 - Shaft: Ø 25 x 75 mm - Dimensions: see photos - Quantity: 4x bevel gearboxes available - Price: per piece - Overall dimensions: 335/130/H120 mm - Weight: 5.6 kg/unit Njdshf Dzlepfx Agxjcr

Stanje: dober (rabljeno), PTO gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox - PTO gearbox: Hydraulic pump gearbox with input splined shaft - PTO input mounting: 1-3/8" 6 splines - Output shaft mounting: 35x31 Z-18 - Shaft distance: 204 mm - Bolt circle: Ø 155 mm / M12 - Dimensions: 350/205/H220 mm Ncjdpfovum Sdex Agxsr - Weight: 13.2 kg

Stanje: rabljeno, Articulated shaft, cardan shaft, universal joint, center bearing, bevel gearbox Nedpohf Dzhofx Agxscr - Cardan shaft: bevel gearbox, unused - Type / No.: 21001375 402027/201 7610AVA08 - Shaft: Ø 32 x 80 mm - Dimensions: see photos - Quantity: 10x bevel gearboxes available - Price: per unit - Overall dimensions: 390/160/H165 mm - Weight: 11.1 kg/unit

Stanje: dober (rabljeno), Universal joint shaft, cardan shaft, cardan joint shaft, drive shaft Ncsdpfewv Narex Agxor -PTO shaft adapter: unfortunately without exact type designation -Part no.: 11.059359 -PTO shaft: Ø 47.5 mm -Dimensions: see photos -Quantity: 2 shafts available -Price: per piece -Overall dimensions: Ø 68 x 455 mm -Weight: 4.7 kg/pc.

Stanje: dober (rabljeno), PTO gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox Ncedpfob A N Auex Agxer - Gear ratio: 1:4 - Suitable for: hydraulic pump - PTO input shaft: 35 mm - Output splined shaft: 25 mm - Weight: 6 kg

Stanje: novo, Stroj za uravnoteženje kardanskih gredi BVI-03-74 Na voljo na zalogi na Poljskem!!! Dobavni rok: en dan!!! Stroj za uravnoteženje gredi do mase 150 kg in dolžine do 4700 mm. Primeren za manjše delavnice s širokim spektrom kardanskih gredi, vključno z gospodarskimi vozili. Ta uravnoteževalni stroj je zasnovan za visoko produktivnost in služi uravnoteženju kardanskih gredi osebnih in tovornih vozil. Zagotavlja enostavno uravnoteženje kardanske gredi zaradi številnih tehničnih rešitev, hkrati pa ima dostopno ceno, kar zmanjšuje vaše finančno breme in omogoča učinkovito rast vašega podjetja. DVA KRAT hitrejši od vaše trenutne opreme. Nedpfepbv Tfox Agxecr Ta uravnoteževalni stroj omogoča kakovostno in hitro uravnoteženje gredi. Če lahko delate 2–2,5-krat hitreje, je to vaša prava konkurenčna prednost. VISOKO UČINKOVITI PRIBOR Stroj je opremljen s tremi glavnimi tipi adapterjev: 1. Hitro-vpenjalni univerzalni adapterji. Dve glavni prednosti: Zaradi posebne zasnove je prirobnica kardanske gredi vpeta v 5 sekundah – brez vijačenja. To pomeni, da lahko gred vpetje izvedete 4-krat hitreje. Druga prednost so centrirni obroči. Gred se namesti v adapterje s centrirnimi obroči, ki jih je mogoče izdelati na navadnem stružnem stroju za najpogostejše velikosti. 2. KV-prirobnični adapterji. Uporabljajo se za uravnoteženje gredi s križno-zobimi prirobnicami, na štiri dimenzije: 120, 150, 180, 205 mm. Običajno za tovorna vozila. 3. Adapter z režami. Za montažo različnih prirobnic z izvrtinami; pritrditev gredi kot pri univerzalnih adapterjih, s centrirnimi obroči. KLJUČNE LASTNOSTI • Uravnoteženje 2-, 3- in 4-nosilnih kardanskih gredi • Dolžina do 4700 mm, masa do 150 kg • Montaža kardana v 1 minuti • Standardni set adapterjev – za 80 % vseh kardanskih gredi • Trije načini pritrditve sredinskega ležaja • Stroj s prožnim ležiščem – visoka občutljivost na vibracije • Upravljanje z enim delavcem • Drsna ležišča – hitra menjava, udobno delo • Varnostni nosilec s hitro vpenjalno sponko • Merjenje v vseh ravninah hkrati • Umerjanje stroja s strani upravljavca • Prikaz neravnotežja v realnem času • Izdelava in tiskanje poročil TEHNIČNE SPECIFIKACIJE Največja masa kardanske gredi: 150 kg Največji premer prirobnice: 300 mm Največja dolžina kardanske gredi: 4700 mm Število nosilcev stroja: 4 Število hkrati merjenih ravnin: 2, 3, 4 Minimalno dosegljiva preostala specifična neuravnoteženost: 10 g mm/kg Obratovalno območje hitrosti rotorja: 1000–2000 vrt/min Napajanje: 380V, 3-fazno, 50 Hz Minimalna moč: 2,2 kW Dimenzije (d/š/v): 6000 х 1100 х 1450 mm Teža: 700 kg Izdelujemo celoten nabor opreme za uravnoteženje in servis kardanskih gredi. Za najboljšo ponudbo nas kontaktirajte!

Stanje: rabljeno, obratovalne ure: 22.802 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 71401454, model krmilnika: MillPlus, PODROBNOSTI O STROJU Krmilnik: MillPlus Električni podatki Nsdpfoyx U Nqox Agxecr Napetost: 400 V Frekvenca: 50 Hz Obratovalne ure Obratovalne ure: 37.732 h Obratovalne ure vretena: 22.802 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 27.167 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC 530, največja hitrost vrtenja: 18.000 obr/min, TECHNICAL DETAILS X-Axis travel: 850 mm Y-Axis travel: 700 mm Z-Axis travel: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC rotary table 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT Heidenhain DNC Njdpfx Agjyzyttjxscr DXF import Kinematic Opt iTNC Automatic cabin door Additional magazine: ZM43 Linear guides: Dynamic version Table axis: A-axis offset from center Manual cabin roof Laminated safety glass window Pallet storage External MQL (Minimum Quantity Lubrication) Tool breakage monitoring A2 Blum Heidenhain probe Prepared for additional probe Event Messenger Tool identification HSK Machine license TCS-Soflex Electronic thermal compensation Electronic hand-held control unit Oil mist extraction (prepared & with post-filter) Flange for oil mist extraction Pressurized air for measurements Chip flushing gun Bed flushing Internal & external air blast Signal beacon Coolant filtration: Paper band filter for coolant system Scraper-type chip conveyor Test protocol: C 40 iTNC 530 PW160

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 61.082 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 800 mm, model krmilnika: HEIDENHAIN TNC 426, Oprema: transportni trak za ostružke, In January 2025, a new spindle was installed! The machine has been regularly serviced! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 1,200 mm Travel Z-axis: 800 mm Feed Rates Rapid traverse: 35,000 mm/min Spindle Speed S1 (continuous operation) Vertical: 10,000 rpm Spindle Speed S1 (continuous operation) Universal swivel head, 2-axis: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical Data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Total installed power: 59.8 kW Operating Hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT-DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for toolmaking, moldmaking, and mechanical engineering Includes documentation and acceptance certificate according to ISO standards Automatic tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis Nsdpfjy Dgyfjx Agxjcr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - Number of machining axes (excluding parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - Clamping surface (left-right) 1000 mm - Clamping surface (front-back) 1000 mm - Workpiece weight (max) 6000 kg - - Positioning accuracy 0.001 ° - - Positioning range 2.5 ° - - Positioning range 2.5 ° - Spindle speed up to 2500 rpm - Drive power 22 kW - Number of tool positions 60 - Number of magazine pockets 2 - Pallet length 1000 mm - Pallet width 1000 mm - Number of pallets 2 - Space requirement (left/right) 6400 mm Ncjdpjy Ez Elofx Agxsr - Space requirement (front/back) 6900 mm - Overall height 4000 mm - Total weight approx. 26000 kg Control HEIDENHAIN TNC 426 The machine is in very good condition and immediately available.

Stanje: dober (rabljeno), Leto izdelave: 2012, Heidenhain iTNC 530 control system Working area: 800 mm x 1020 mm x 970 mm (X/Y/Z) Table size: 630 x 630 mm Table load capacity: 700 kg Maximum workpiece diameter: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system Motor spindle: 16,000 rpm Drive power: 25/35 kW Max. torque: 160/223 Nm Nodpfx Agorx N Tzjxecr Spindle taper: HSK-A63 Tool magazine: 120 positions - Probe - Kinematics package - Tool length measuring device - BLUM laser measurement system for tool monitoring - Electronic handwheel - Extraction unit - 80 bar internal coolant supply system

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 9.925 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 750 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 55 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, širina mize: 900 mm, dolžina mize: 1.150 mm, obremenitev mize: 2.000 kg, skupna masa: 22.000 kg, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 9.925 h, dovod hladilne tekočine: 80 letvica, dolžina orodja: 500 mm, premer orodja: 160 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025), which has only run 400 hours since! Year of manufacture: 2015 Control: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100° / -130° C: 360° Table load capacity: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: Nsdpfxjygx Hne Agxocr - Heidenhain TNC 640 control - AVD Active Vibration Damping - ACC Active Chatter Control - AFC Adaptive Feed Control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle taper: HSK-A63 - 60-tool magazine - 9-fold rotary feedthrough - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electrical thermal compensation - ICS 80 bar with paper band filter - External air blow-off - Internal air blow-off - Electronic handwheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip flushing gun ...and more. The machine is immediately available! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also performed by Hermle! Invoice and measuring protocol available!

Stanje: pripravljen za uporabo (rabljen), Deckel FP1 v dobrem rabljenem stanju. Sveže preverjen Heidenhainov digitalni prikazovalnik. Brezstopenjski pomik in vstop v osi X in Z. Univerzalna rezkalna miza. Vpenjalni sistem orodja SK40 S20x2. Leto izdelave: 1978. Nedpfey D Uq Ssx Agxecr Možen preizkus pod napetostjo. Možna dostava.

Leto izdelave: 2004, stanje: skoraj kot novo (rabljeno), Profilbiegemaschine hydraulisch, Schwerlast – Abtriebswellen 360 mm Ausgestattet mit Zugwerkzeugen für H-Träger (HEB, IPE, INP), geeignet zum Biegen auf der starken Trägerachse. Ausstattung: - Pyramidale, doppelte Pinch-Seitenwalzen, einzeln hydraulisch verstellbar - 3 angetriebene Walzen, hydraulisch mit Getriebeeinheit, synchronisiert - Walzensatz für HEB-Träger, INP-Träger, Flachstahl und Vierkantstahl - Satz Biegeköpfe für das Ziehen und Biegen von HEB-/INP-Trägern auf der starken Achse - Walzensatz zum Rohrbiegen, Maximalrohrdurchmesser 20 Zoll - Seitliche Richtvorrichtungen, hydraulisch betrieben, verstellbar in 3 Richtungen (links/rechts) - Zusatzwalzen für Winkelstahl- und T-Profil-Biegungen (Steg innen/Steg außen) - Bedienpult mit elektrischen Joysticks für manuellen oder automatischen Betrieb - Digitales Anzeigedisplay für 8-Achsen-Positionsmessung/-anzeige der Walzen, 8-Achsen automatisches Programmieren von Biegearbeiten - Elektrischer Anschluss Vac 400/50 (auf Anfrage auch umverdrahtbar) - Maschinengewicht ca. 65 Tonnen - Hydrauliköltankvolumen 1200 Liter - Hochdruck-Hydraulikaggregat mit mehreren Pumpen, angetrieben von 100-PS-Elektromotor - Stufenlos regelbare Arbeitsgeschwindigkeit (langsam/schnell) - Not-Aus-Einrichtungen gemäß geltender Sicherheitsbestimmungen - CE-Qualitätszertifizierung, hergestellt in Italien - Service- und Betriebsanleitungen im Lieferumfang enthalten Auf Wunsch liefern wir zusätzliche, austauschbare Walzensätze für verschiedene Profileinsätze. Leistungstabellen (maximal): – HEB 500 – INP 600 – Winkelstahl 200 mm – T-Profil 300 mm – Rohr bis 20″ Ncedoiwa Hcspfx Agxor – UNP 500 mm – Flachstahl 300 x 80 mm – Vierkantprofil 200 mm – Rohr / Rundrohr bis 508 mm (siehe beiliegende Kapazitätstabelle)

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 25 h, High-Performance Machining Center SPINNER VC850 Travel paths: X850, Y510, Z510 mm Version: "Advanced" Featuring patented guideway cover concept High-Precision MILLING SPINDLE up to 12,000 rpm / 15.2 kW / 97 Nm (max) As in-line spindle with direct drive, no belt Spindle tool holder: SK40 DIN69871 TOOL MAGAZINE with 32 tool stations MAGAZINE FLAP pneumatically operated in the work area DIRECT MEASURING SYSTEMS on X/Y/Z axes FANUC 0i-F Plus CONTROL including the following standard functions: - Path control system with FANUC iHMI user interface - FANUC 15" LCD touch screen - User memory 2MB, max. 1000 program numbers - USB interface for NC program data transfer, Ethernet interface - Max. 4 axes simultaneous interpolation Nedpfx Agek Raywjxocr - 6+48 workpiece coordinate systems available - 400 tool offset pairs with tool life monitoring - G-Code & M-Code guidance functions - Extensive standard FANUC cycle package “Milling” available as G-Code and under MGi - e.g. threading without compensation chuck, thread cutting, engraving. Functions for helical and cylindrical interpolation - Scaling, mirroring, and coordinate system rotation functions - Parallel programming in the background - Run-time and piece counters - Inch-metric conversion - Electronic handwheel standard - Dialog language for control panel trilingual: German/English/French UNIVERSAL CHIP CONVEYOR VC850 Discharges to the RIGHT side of the machine SPINDLE PREPARATION FOR HIGH-PRESSURE, suitable for auxiliary tank up to 22 bar HIGH-PRESSURE TANK 22 bar with paper band filter for central through-spindle flushing PREPARATION FOR SPINNER STANDARD PROBE Blum Wireless SPINDLE PROBE Spinner-Blum with tool holder suited for milling spindle ADDITIONAL HOOD on top for a closed work area, required for high-pressure flushing or heavy misting/extraction processes STANDARD DOCUMENTATION IN GERMAN Consisting of machine manual and CNC manuals, supplied digitally on the control. Paper manuals available for an additional charge. LIFTING EYE BOLTS for crane unloading, set of 4 pieces. Mandatory for crane transport. STANDARD PAINT FINISH two-tone: light grey RAL7035 and blue grey RAL5008 Electrical configuration EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-wire) Notes: The price includes warranty services within Germany only. For new and demonstration machines, images shown may not depict the actual machine but comparable models. Any accessories shown (such as clamping devices or tool holders) are only included if specified in the technical description. Please request a detailed ex works offer. Visit our factory near Munich or one of our showrooms. We may also have further offers for comparable machines. Prior sale reserved expressly.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: 840D, premer vrtljive mize: 800 mm, največja hitrost vretena: 14.000 obr/min, dovod hladilne tekočine: 20 letvica, vhodna napetost: 400 V, DMU 70 3+2 osi Stroj je trenutno v prenovi. Novo vreteno Nova vodila osi Y in Z Zaščitni mehovi Opozorilna okna Meritve z BallBar vključno s protokolom Siemens 840D s Shopmill - ročno kolo Ncedpfxeyx Am Re Agxjr Vreteno SK40, 14.000 rpm Menjalec orodij za 30 orodij Notranje hlajenje 20 bar Rezervoar s trakom filtrom 600l Transporter za ostružke Kabinska streha Merilna tipalka Izpiralna pištola Način delovanja 4 Dokumentacija Na voljo od 04/2026

Stanje: rabljeno, Rabljeni Robot Coupe Model R30 – popolnoma nerjaveči vertikalni kuter, namenjen velikim gostinskim obratom – restavracijam, proizvajalcem mesnin, delikates in slaščičarskih izdelkov z največjo dnevno kapaciteto do 500 porcij. Omogoča obdelavo mesa, zelenjave in sadja, pripravo testa, paštet, majoneze, pirejev, namazov ter drobtin, prav tako sekanje zelišč in začimb ter drobljenje oreškov in mandljev. Odstranljiva mešalna posoda s skupno prostornino 30 litrov in delovno prostornino cca 20 litrov, dimenzije 360 mm premer x 290 mm globina. Nož z ravnim rezilom (3 rezila) poganja dvohitrostni električni motor 4,1/5,0 kW, 1500/3000 vrt./min, 50 Hz, 400 V. Mešalna posoda ima plastični pokrov z vzvodnim zapiralnim sistemom, opremljen s varnostnim končnim stikalom. Vključena je tipkovnica za upravljanje in integrirana električna omarica. Zunanje mere: 600x720x1250 mm (višina), bruto teža 130 kg. Specifikacije: Moč: 4,1 kW Teža: dejanska: 130,0 kg Nodjyma D Uspfx Agxscr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (since 1932) - Type: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of Manufacture: 1990 - Circuit diagram no.: UWIA-0-161A CONDITION Very good, well-maintained overall condition. Fully functional, tested, and ready for operation. Normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID No. 229 328 01 - Made in West Germany SPINDLE DRIVE DATA (GRINDING SPINDLE) - Motor Type KK 5 S (3~) - 0.37 kW, 2,800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2,100 / 3,000 / 4,200 / 6,000 rpm (4-stage) WORKPIECE SPINDLE DRIVE DATA - Motor Georgii-Kobold KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1,400 / 2,800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (TOTAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current for the machine: 2.8 A - Rated current for main supply fuse: 10 A EQUIPMENT & FEATURES - Swivelling work table ±90° - Tailstock - Workpiece spindle with independent drive - Grinding spindle head with 4 speed stages - Heidenhain VRZ 710 digital readout (2 axes) - Tool cabinet with approx. 15 CBN grinding wheels included - Machine mobile on 4 rollers APPLICATION Ncsdpfx Asy Er Ahegxor Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools as well as round and flat profiles. Ideal for grinding shops, toolmaking, and maintenance. LOCATION & TRANSPORT Location: Central warehouse of Auktionshaus Köck, 6178 Unterperfuss, Austria. Self-collection or shipping by freight forwarder upon arrangement. Transport costs on request (depending on delivery address). All details without guarantee. Subject to errors and misprints.

Stanje: rabljeno, Leto izdelave: 2007, x-travel: 1,250 mm y-travel: 1,000 mm z-travel: 1,000 mm Control: SINUMERIK 840D powerline C-axis (table): 360° x 0.001° B-axis (head): -10° to 180° x 0.001° Ncodpey E Tvisfx Agxer Table rotation speed (stepless): 10 - 500 rpm Feed rate X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min Tool holder: HSK 100 Spindle speed (stepless, programmable): 20 - 8,000 rpm Spindle speed gearbox stage 1: 20 - 1,600 rpm Spindle speed gearbox stage 2: 1,600 - 8,000 rpm Drive power 100% duty cycle: 19.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 772 / 492 Nm Table clamping area: Ø1,100 mm Table load: 1.50 t Tool magazine with 180 slots Tool diameter: 110 mm Tool diameter with free adjacent slots: 230 mm Max. tool length: 500 mm Max. tool weight: 30.00 kg Total power requirement: 85.00 kW Machine weight approx.: 32.50 t Space requirement approx.: 9.50 x 4.80 x H3.80 m 5-axis machining center with rotary function and pallet changer. Control: SIEMENS SINUMERIK 840D powerline, Mode 4, rack-type tool magazine with 180 slots, band filter system 980 liters, chip conveyor, coolant through spindle, RotoClear.