Tira Vhodna Celica Za Simulacijo Klime nakup rabljenega (84.983)

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber Klodpfxovx S Hho Al Nor - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Leto izdelave: 2016, stanje: rabljeno, Ser. no. 15-3599B, consisting essentially of: loading station with 2 product lanes, continuous cycle conveyor belt, 2 forming stations, turning station, micro-lubrication station, continuous washing system, make Bous, type Duwamat K1000 WSST, year 2016, ser. no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16 - 24°, fine filter, oil separator, control cabinets, system control with operator panel, make Siemens, type SIMATIC HMI touch, inspection system with 2 cameras, make KEYENCE, type Vision System, eddy current tester, make Rohmann, type Elotest IS500, laser marking system, make Videojet, type 7510, fiber laser, laser power 50 W, output station, roller conveyor system for crate discharge, 2 product lanes, satellite terminals, control cabinets, safety devices, plexiglass enclosure, peripheral equipment including extraction system, make ESTA, type Whispersog 2.2 JET, locknut feeding system with feed hopper, vibratory bowl feeder, separator, insertion station, batch of trolleys, batch of load carriers, trolleys. Subject to prior sale. Kodpfx Aey A Ih Usl Njlr

Leto izdelave: 2016, stanje: rabljeno, Proizvajalec: FELSS, tip: CBC, leto izdelave: 2016, serijska številka: 15-5164B, zmogljivost upogibanja Ø 3,2 x 0,7 mm - 14 x 2,0 mm, največja dolžina cevi 1.200 mm, 2 CNC upogibni glavi, PC upravljanje z zaslonom na dotik, upravljalna konzola, dvoetažni podajalni sistem, vstavna postaja, robot proizvajalca Yaskawa, tip YR-MA1440/MH12-A00, robotsko krmiljenje tip DX200, Teach-In terminal, podajalnik za drobne dele z zalogovnikom, vibracijska posoda za podajanje, sortiranje, odvzemna/usmerjevalna postaja, proga za iznos zabojev dolga 7.000 mm, velikost zabojev 350 x 250 x 150 mm, krmilne/električne omare, zaščitna ograja/ohišje iz pleksi stekla, postaje in regali za pripravo pozicij, tiskalnik etiket proizvajalca CAB, tip eos 1, čitalnik črtnih kod proizvajalca Zebra, tip Omni tc15. Ksdjyx Euqjpfx Al Njlr

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Robot cell for leak testing consisting of: FANUC LR Mate 200iC/5L robot – year 2008, measurement table equipped with 8 light curtains, 2 Innomatec devices for leak testing, type LTC-502. Kledpfx Ajn D D E Tjl Ner The cell is equipped with a safety system and CE certification.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21220, skupna masa: 8.600 kg, skupna širina: 4.000 mm, skupna višina: 3.100 mm, skupna dolžina: 9.400 mm, nosilnost: 180 kg, The system consists of the following components: - YASKAWA Positioner V2-500D3 (Year of manufacture: 2022, 466843-1-1) - LASO WP-SLK Welding Cell - YASKAWA Industrial Robot GP180 (Year of manufacture: 2022, Serial No.: 6V22Y2842450001) - NIMAK multiCONTROL Control Cabinet with Bosch Rexroth PRC7300 (Year of manufacture: 2023, Serial No.: 7261404217680) - RSP Weld Gun Changer System - NIMAK Welding Gun LRN 300-650-R54-175-150-P2U-WR (Year of manufacture: 2023, Machine No.: 2212–2129 N) - NIMAK Welding Gun CRN 300-650-R54-200-P2U-WL (Year of manufacture: 2023, Machine No.: 2212–2128 N) - Weld Gun Cleaning Station TECHNICAL DETAILS Positioner Control: LASO Industrial PC / Siemens S7 Yaskawa GP180 Payload: 180 kg Yaskawa GP180 Weight: 1,020 kg Ksdpfx Aeyft Evjl Nolr Yaskawa GP180 Controller: YRC1000 Yaskawa GP180 Teach Pendant: +RM1 Rotary Brush Cleaning Station: 2 x 180 x 150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,400 x 4,000 x 3,100 mm Total Weight: 8,600 kg Type of Input Current: Alternating Current (AC) Input Voltage: 400 V Rated Power: 138 kVA at 100% duty cycle Rated Voltage: 400 V / 3 Ph / 50 Hz Cooling Type: Water-cooled EQUIPMENT - Servo rotary axis - Swivel unit - Penlink rotary unit - LASO Industrial PC / Siemens S7 control - Integrated pneumatic, coolant, and signal feed-throughs - Safety enclosure

Leto izdelave: 1996, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 26 628, Tehnične specifikacije: Klodoyill Hopfx Al Ner Dolžina reza: 5000 mm Žagin list: 420 mm z valjčno stezo Žagalni agregati vrtljivi in nagibni

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21220, vrsta vhodnega toka: Klimatska naprava, skupna višina: 3.100 mm, skupna širina: 4.000 mm, skupna dolžina: 9.400 mm, skupna masa: 8.600 kg, vhodna napetost: 400 V, vrsta hlajenja: voda, Resistance Spot Welding System LASO Tech Systems "WP Welding System" Year of manufacture: 2023 Serial number: 21220 Order number: 11B01 265845 Manufacturer: LASO Tech Systems GmbH, 98527 Suhl Type: WP Welding System Total weight: approx. 8,600 kg Dimensions (L x W x H): approx. 9.4 x 4.0 x 3.1 m Rated voltage: 400 V / 3 Ph / 50 Hz Rated power: 138 kVA at 100% duty cycle Ksdpjxlixwofx Al Nelr Main components: YASKAWA Positioner V2-500D3 L = 1650 Serial number: 466843-1-1 | Year of manufacture: 2022 | Weight: 1,409 kg | Item number: 411503 | Part No.: 148548-100 (Yaskawa Nordic AB, Sweden) Equipment: Servo rotary axis, swivel unit, Penlink slip ring (P/N 365003 – S/N 3197). Total unit weight: approx. 1,500 kg. Project assignment: LASO Tech, project no. 30101293. Welding cell LASO WP-SLK Steel frame construction with safety enclosure, electrically interlocked access points. Integrated positioning systems (S1 / S2). Control: LASO industrial PC / Siemens S7 / Robot controller YASKAWA Motoman-compatible. Power supply 400 V / 50 Hz / 138 kVA. Process control for resistance spot welding with cooling water, compressed air, and network interfaces. I/O cabling fully provided. YASKAWA Industrial Robot GP180 with YRC1000 Controller Type: YR-1-06VX180-A00 | Year of manufacture: 11/2022 | Payload: 180 kg | Net weight: 1,020 kg Serial number: 6V22Y2842450001 | Manufacturer: YASKAWA Europe Robotics d.o.o., Kocevje (Slovenia) Controller: YRC1000, type ERAS-1000-06VX280-E10, SN 6V22X2807840001, year of manufacture 10/2022 Power: 6.5 kVA, Supply: AC 380–440 V, 50/60 Hz | Teach Pendant +RM1 |, integrated safety shut-off. Control cabinet NIMAK multiCONTROL with Bosch Rexroth PRC7300 Type: PRC7300-L1-01VRS-0105-01-00002-EC-01 | Serial number: 7261404217680 Supply: 3~ 400–480 V / 110 A | Manufacturer: Bosch Rexroth AG, Lohr am Main Year of manufacture: 2023 | Fully wired with safety modules and EMZ interface. RSP Tool Changer System Manufacturer: Robot System Products (RSP), Sweden | Type: P8366-150 with Tool Changer P7501-036 (SN 0001 / 0002) and Docking Units P8303A. Pneumatic, coolant and signal transfer integrated. Connection via RobiFix. Welding Guns Gun 1 – NIMAK LRN 300-650-R54-175-150-P2U-WR Project: 95.011.360 | Machine No.: 2212–2129 N | Weight: 120.5 kg | Year of manufacture: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297432). Coupling: RSP P7501-036 + P8303A. Gun 2 – NIMAK CRN 300-650-R54-200-P2U-WL Project: 95.029.224 | Machine no.: 2212–2128 N | Weight: 109.5 kg | Year of manufacture: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297431). Coupling: RSP P7501-036 + P8303A. Gun cleaning station (LASO special construction) Free-standing unit on steel base with SEW geared motor (400 V). Two rotary brushes Ø 180 mm x 150 mm. Condition and Scope of Delivery: Complete system, year of manufacture 2022/2023, as new. All components supplied including cabling, control cabinets, safety enclosure and documentation. Disassembled and secured for transport upon request.

Stanje: zelo dobro (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical data: Test chamber capacity: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Internal chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion testing: Salt spray test: ambient temperature up to +50°C Condensation water test: ambient temperature up to +45°C Humidifier: +75°C Temperature stability Temporal temperature deviation: ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Kljdpfew Hz Trex Al Ner For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Tip: SC/KWT 450 Solna pršilna komora Tehnični podatki: Prostornina preizkusne komore: 450 litrov Največja obremenitev: 100 kg Rezervoar za solno raztopino: 180 litrov Zunanje mere: višina 920 mm, širina 1930 mm, globina 800 mm Mere testne komore: višina 740 mm, širina 850 mm, globina 570 mm Področja uporabe: Korozijski testi: Test s solnim pršenjem: temperatura komore do +50°C Test s kondenzacijsko vodo: temperatura komore do +45°C Vlažilec +75°C Temperaturna konstanta Časovno odstopanje temperature: ±K Napetost: 1/N/PE AC 230V ±10% 50Hz Nazivna moč: 2,0 kW Nazivni tok: 8,7 A Kombinirani testi: Test s solnim pršenjem SS: DIN 50021 Test s kondenzacijsko vodo KFW: DIN 50017 Normalna klima (prezračevanje): DIN 50014 Teža: 180 kg Stanje: rabljeno / used Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih so pridržane!) Kodpow Strcofx Al Nelr Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: rabljeno, Dieses Angebot bezieht sich auf eine Instron 2518-807 Zug-/Druckkraft-Lastzelle (Tension/Compression Static Load Cell). Das Gerät ist voll funktionsfähig und sofort einsatzbereit. Die Instron 2518-807 Zug-/Druckkraft-Lastzelle ist für hochpräzise Kraftmessungen in verschiedensten Prüfapplikationen konzipiert. Dank ihres robusten Designs eignet sie sich für genaue Prüfungen in Zug, Druck, zyklischer Beanspruchung sowie Wechselbelastungen und ist somit ein unverzichtbares Werkzeug im Bereich der Materialprüfung und Qualitätssicherung. Hauptmerkmale: Kapazität: Messbereich bis 100 N (22 lbf), somit für zahlreiche Prüfaufgaben geeignet. Außergewöhnlicher Messbereich: Präzise Kraftmessungen bis zu 1/500 der Nennkapazität möglich – für maximale Genauigkeit in sämtlichen Anwendungen. Automatische Erkennung: Mit elektronischer Seriennummer und elektrischer Kalibrierung für eine einfache, fehlerfreie Inbetriebnahme ohne manuellen Abgleich. Integrierter Überlastschutz: Überlastsicherung minimiert das Risiko von Beschädigungen bei Handhabung und Messung und erhöht so Langlebigkeit und Zuverlässigkeit. Tara-Gewicht: Tara-Möglichkeit bis zu 40% der Nennkraft – kompatibel mit verschiedenen Spannzeugen und Vorrichtungen für maximale Flexibilität. Normenkonformität: Vollständig konform mit internationalen Kraftmessnormen wie ASTM E4, ISO 7500-1 Klasse 0,5 sowie JIS B7721 und B7733, gewährleistet zuverlässige, präzise Messungen. Ksdjxxzndepfx Al Nelr Kompatibilität: Die Instron 2518-807-Lastzelle ist mit verschiedenen Instron-Prüfmaschinen inklusive der UT- und 3300-Serie kompatibel und damit vielseitig einsetzbar – ideal für: Materialprüfung: Optimal zur Bestimmung mechanischer Eigenschaften von Werkstoffen unter Zug- und Druckbeanspruchung. Qualitätssicherung: In industriellen Anwendungen zur Überwachung und Gewährleistung der Produktqualität und Einhaltung von Spezifikationen. Forschung & Entwicklung: Unentbehrliches Werkzeug für Wissenschaftler und Ingenieure zur Untersuchung des Materialverhaltens unter unterschiedlichen Lasten.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. Klsdpfx Aewyc H Tol Nor (We will only respond to inquiries that include your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Felder Clean Air Extraction Unit | Dust Extraction System RL 200 | Ø 200 mm Maximum air flow: 4000 m³/h Rated air flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter surface area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput capacity: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Kledpowa Rlksfx Al Nor Weight: 950 kg Hydraulic oil volume: 125 litres Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The system has already been dismantled and is stored at the Raasdorf warehouse.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), številka stroja/vozila: 12088 10, Performance: 125 cups per minute (gross) Consists of: - Destacker - Bottom label dispenser - Side label dispensers 1 + 2 and 3 + 4 - Station for finishing the side label gluing (press-on system) - Inspection station with camera monitoring - Restacker with counter Kedpfx Aljn D Hczj Nolr - Outfeed conveyor for the finished product The machine is also capable of labeling round cups (160–180° around). Cup height: 120–130 mm

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zwick 5 kN natezna preizkusna naprava Kedpfxsy Dhmgs Al Nelr

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: HAPA Model: 421 Klsdpfx Aljcq Tm Es Nsr High-performance labelling machine for ampoules, suitable for containers with diameters ranging from 8 mm to 30 mm. Capacity: up to 18,000 units/hour Label size (min): 15 x 28 mm Label size (max): 60 x 76 mm Year of manufacture: 2002

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Na voljo je popolna plastna paletirna linija IW-Anlagentechnik z ovijalcem palet Tosa in potisno tehnologijo. Procesna veriga: dovod izdelka – tvorjenje plasti – paletizacija – transport – ovijanje. 1) Paletirni sistem IW-Anlagentechnik PMS 120, letnik: 1992, rotacijska enota: 90°. 2) Transportna tehnika Transpak. 3) Rotacijski stretch-ovijalec Tosa 124E, letnik: 2010. Linija se je uporabljala v živilski industriji za paletiranje steklenic in drugih posod za tekočine. Dokumentacija je na voljo. Možen je ogled na lokaciji. Klsdpfx Aloy Eg Dge Nor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, Na voljo je rotacijski lepilni stroj Krones za mokro lepljenje etiket na steklenice. Formati steklenic: 1l/0,75l. Vključno z različnimi formatnimi deli in nastavljivo kaseto za etikete. Ogled na lokaciji je možen. Kodpsy Eg Ekefx Al Nolr

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Kedpfx Alegfm Ryj Nolr Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: zelo dobro (rabljeno), Memmert Model: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber manufactured by Memmert, model CTC 256. This unit comes from professional use and is ideally suited for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climate conditions. It allows for both cooling and heating processes and – in this configuration – humidity control. This makes the device perfect for material testing, aging tests, climate stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated controller, complex testing programs with specific temperature and time profiles can be configured. The forced air circulation system ensures even temperature distribution within the chamber. Via the available interfaces, measurement data can be logged and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity regulation Electronic controller with program functions Forced air circulation for even temperature distribution Internal protocol memory USB and Ethernet interfaces 230 V auxiliary socket Cable port (side) Water tank system (humidification/condensate) Mounted on castors/mobile Technical data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see picture) Kedpfx Asy D Ni Ael Nolr Memmert CTC 256 Climate Test Chamber Insertion shelf Water canister Documentation Delivery as shown (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Rezkalni rotor za iztiskalni granulacijski stroj Proizvajalec: MAAG / Scheer - Širina rezkalnega rotorja: 200 mm - Odlično stanje Kodjpgulwspfx Al Njlr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, engine power 5.5 kW diameter of briquette 80 mm sawdust level sensor Klodpjy Amx Sjfx Al Nsr operating hours 6,363 h hopper diameter 1,200 mm adjustable feed quantity year of manufacture 1996 power supply 380 V

Stanje: rabljeno, Leto izdelave: 2007, Wheel diameter – max. 500 mm Hypoid adjustment ±70 mm Axle cross angle 90° Y-axis distance 150 – 350 mm Z-axis distance 120 – 340 mm Speed range – stepless 0 – 5000 rpm Spindle torque 57 Nm Kodpfx Asukitxel Njlr Taper 99.2 mm Drawbar force – tool clamping 23,000 N Braking torque max. 93 Nm Total connected load 20 kVA Total power requirement 15 kW Machine weight approx. 6 t Space requirement approx. 2.35 x 2.24 x 2.5 m Working area: Crown wheel diameter max. – 500 mm Hypoid adjustment X (v) – ±70 mm Axle angle – 90° Distance Y-(H) axis crown wheel/flange pinion spindle – 150 ... 350 mm Distance Z-(J) axis pinion/flange crown wheel spindle – 120 ... 340 mm Pinion spindle head: Speed range, stepless – 0 ... 5000 rpm Torque – 57 Nm at n = 0 ... 1240 rpm Torque – 54 Nm at n = 1240 ... 5000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) Drawbar force for tool clamping max. – 23,000 N Crown wheel spindle head: Speed range, stepless – 0 ... 3000 rpm Torque – 95 Nm at n = 0 ... 750 rpm Torque – 93 ... 24 Nm at n = 750 ... 3000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14)) Drawbar force – max. 23,000 N Max. crown wheel braking torque – 93 Nm up to 3000 rpm pinion speed at i = 1:4 Max. crown wheel braking torque – 93 Nm up to 1200 rpm pinion speed at i = 1:1.6 Max. crown wheel braking torque – 59 Nm up to 1200 rpm pinion speed at i = 1:1 Electrical: Total connected load – 20 kVA (machine effective power) Voltage – 3 x 400 V (others on request) Voltage tolerance – ±10% Frequency 50 Hz (others on request)

Stanje: pripravljen za uporabo (rabljen), Na voljo je slojni paletizer Happel. Izdelki: vreče/škatle/enote/posode/sodi, obračanje paketa: 90°/180°/270°, format palete: 800mm/1200mm, največja višina palete: 1500mm, najmanjše dimenzije izdelka X/Y/Z: 150mm/150mm/40mm, največja teža sloja: 150kg, največja zmogljivost paletizacije: cca. 2500 kosov/h. Dimenzije stroja X/Y/Z: cca. 4000mm/2600mm/2500mm, teža: cca. 2500kg. Možen je ogled na lokaciji. Kjdpey Dup Isfx Al Nolr

Stanje: zelo dobro (rabljeno), KATALOG ŠT. 7153 TEHNIČNI PODATKI - hidravlična stiskalna sila - oblika briketa: okrogla - premer briketa: 70 mm - mere rezervoarja (v/š): 920x870 mm - zmogljivost: cca. 110 kg/h - avtomatsko delovanje stroja - oljni hladilnik - ogrevanje olja - kontrolno okence - motor: 7,5 kW - mere (d/š/v): 1750x1300x1460 mm - teža: 825 kg PREDNOSTI Ksdpfx Alsyyyuze Nelr – ni prebarvan – italijanska proizvodnja – rabljena briketirka – zelo dobro stanje Neto cena: 38.900 PLN Neto cena: 9.260 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih tečaja)

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Consisting of the following machines: A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) Kodpjyyb Susfx Al Nelr E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.