Vhodna celica za simulacijo klime

TIRA KB 127 TCZ 4022 S -2K -40 bis +140°C

TIRA
Type: TCZ 4022 S-2K
Description: Air-cooled Climate Simulation Chamber
System Configuration:
The system consists of the following main assemblies:
- Walk-in, insulated chamber
- Air handling room
- Humidification system
- Machinery room
- Control cabinet

Technical Data:
Performance range for temperature testing:
- Temperature range: -40...+140°C
- Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068)
- Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068)
- Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C
- Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C

Performance range for climate testing:
- Temperature range: +10...+90°C
- Humidity working range: 10...approx. 95% r.h. (without thermal test room load)
- Dew point temperature range: +5...+89°C (without thermal test room load)
- Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air)

Performance range for climate testing with heat compensation:
- Temperature range: +15...+80°C
- Humidity: 15...approx. 80% r.h. (without thermal test room load)
- With max. 16 kW heat compensation
- Dew point temperature range: +10...+74°C (without thermal test room load)

Dimensions:
- Test room (W x D x H): approx. 2260 x 4648 x 2260 mm
- Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm
- Clear door opening, test room door (W x H): 2260 x 2260 mm
- Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm
- Control cabinet (W x D x H): 800 x 500 x 2000 mm

Design features:
- Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area
- Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater
- Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger
- Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet
- Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel
- Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm
- Test room lighting: 4 spotlights, each 500 W
- Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool
- Refrigeration unit (1 pc.): Bltzer 6G-30.2Y
- Refrigerant: R449A
- Refrigeration oil: SEZ 32
- Steam humidifier (1 pc.): EDB 40

Color scheme:
- Chamber: RAL9010, white
- Door: RAL9010, white
- Machine unit: RAL 7032, pebble grey
- Control cabinet: RAL 7032, pebble grey

Weights:
- Complete unit: approx. 4,900 kg
- Machine set KB 127: approx. 750 kg
Itjdpfovx S Hhjx Al Nef
- Control cabinet: approx. 120 kg
- Humidification system: approx. 64 kg

Connections:
- Rated voltage: 400 V +6%/-10% 3/PE N 50Hz
- Rated power: 95 kW
- Rated current: 150 A

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.