Styrotec Styroshred nakup rabljenega (24)

Stanje: novo, Leto izdelave: 2026, The shredder breaks down large, bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30 kg/m³, into small pieces. In the process, the shredder reduces the volume by approximately 65%. Nwedpfx Ajxlzkroqqeh This makes the machine ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing with polystyrene packaging materials. Throughput capacity: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, volume reduction of your polystyrene residues by a factor of 3:1 is achieved solely through shredding. Custom configurations are available on request. VAT will be shown separately on the invoice. Shipping within Germany is included, surcharge applies for islands. If you have any questions, please feel free to contact us.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The shredder breaks down large, bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30 kg/m³, into small pieces. In the process, the shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing with polystyrene packaging materials. Throughput capacity: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Nwjdpfxoza D U Rj Aqqjh Depending on the sieve set, volume reduction of your polystyrene residues by a factor of 3:1 is achieved solely through shredding. Custom configurations are available on request. VAT will be shown separately on the invoice. Shipping within Germany is included, surcharge applies for islands. If you have any questions, please feel free to contact us.

Stanje: rabljeno, Leto izdelave: 2015, Droblilnik razbija velike, okorne kose stiropora in EPS ter podobnih materialov z maksimalno volumsko gostoto do 30 kg/m³ v manjše kose. Pri tem droblilnik zmanjša volumen za približno 65%. Stroj je tako odlično primeren za uporabo v industrijskih in obrtnih podjetjih ter za vele- in maloprodajo embalažnega materiala iz stiropora. Njdpfx Aqey At Akeqswh Glede na izbrani set sit se ob samem drobljenju vaših ostankov stiropora volumen zmanjša v razmerju 3 : 1. Posebne izvedbe so mogoče po dogovoru. DDV je na računu prikazan ločeno. Pošiljanje po vsej Nemčiji je vključeno, za otoke velja doplačilo. Če imate vprašanja, nas lahko kadar koli kontaktirate.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 50 h, številka stroja/vozila: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminium with T-slots, crosswise every 250 mm Max. load: 1,000 kg evenly distributed over the entire surface 2-axis milling head ST7 Nedpswwq Hcjfx Aqqewh Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow air / MQL: external Linear axis drives Feed rate X and Y axes: up to 50 m/min Feed rate Z axis: up to 30 m/min Colour Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - 15-position tool changer - Control unit in separate, mobile console

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 306, Initial commissioning: 2024 Control: Heidenhain TNC 640 incl. HR 520 handwheel X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping area: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots crosswise every 250 mm Max. load: 1000 kg evenly distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 rpm Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blow air / MQL: external Linear axes drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - Work area cover - 16-position tool changer - Control on separate, mobile console Optional at extra charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnostics Nodpjvy Dugjfx Aqqjwh Pictures show an identical machine with slightly different equipment!

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Nwodjw R Ranjpfx Aqqeh Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 37.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.750 mm, največja hitrost vretena: 20.000 obr/min, model krmilnika: Heidenhain iTNC 530, Prejšnji lastnik stroja je bilo uveljavljeno ekipa Formule 1 iz srednje Evrope! Glava rezkarja je bila sveže pregledana pri proizvajalcu stroja, delno obnovljena in je popolnoma funkcionalna! Stroj je bil ves čas vključen v vzdrževalno pogodbo pri proizvajalcu. TEHNIČNI PODATKI Hod X-os: 5.000 mm Hod Y-os: 3.000 mm Hod Z-os: 1.750 mm Hitrost pomika X-os: 65 m/min Hitrost pomika Y-os: 65 m/min Hitrost pomika Z-os: 65 m/min Maks. število vrtljajev vretena: 20.000 min⁻¹ Pospešek osi: 5 m/s² Maks. navor: 63 Nm Zadrževalni navor (pri zaklepu) A & C os: 2.000 Nm Vpenjalni sistem orodja: HSK 63A PODROBNOSTI O STROJU Krmilnik: Heidenhain iTNC 530 Ročna enota: HR420 Delovne ure vretena: ca. 37.000 h Nsdpfxezcqnco Aqqjwh Ure vključitve: ca. 83.000 h Moč vretena: 20 kW Poraba električne energije: 130 kW Napetost: 400 V Frekvenca: 50 Hz Dimenzije in teža Prostor brez periferne opreme (D x Š x V): 7.500 x 8.500 x 6.600 mm Skupna teža: 90.000 kg OPREMA 2-osna vilicasta rezkarska glava 5 Število obratov brezstopenjsko nastavljivo Minimalno količinsko mazanje Menjalec orodja za 50 orodij Zaprt delovni prostor Opomba: Namizje stroja NI vključeno v obseg dobave, pogonske povezave za motorje X, Y in Z osi pa je potrebno zaradi starosti zamenjati. Stroj je trenutno demontiran in v skladišču. Ogled je možen kadarkoli po dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Spoštovane stranke, trenutno vam ponujamo zelo dobro ohranjeno rabljeno tračno žago znamke HEMA. Tukaj so tehnični podatki stroja: Tip: UH900 Leto izdelave: 2004 Izvedba: desna Širina reza: 865 mm Maksimalna višina reza: 700 mm Premer valja: 900 mm Dolžina žaginega lista: 6.550 mm Moč: 5,5 kW Nodozcn H Aepfx Aqqswh Hitrost reza: 1.800 m/min s preklopno mizo z natančnim zobatim letevnim mehanizmom Dimenzije: pribl. 1630 x 1080 x 2.825 mm Teža: pribl. 950 kg Za dodatna vprašanja nas prosimo kontaktirajte.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 15.000 obr/min, model krmilnika: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the item within week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 20 m/min Rapid traverse Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Clamping table (L x W x H): 4,500 x 2,000 x 400 mm Longitudinal T-slots: 18H12 T-slot spacing: 250 mm Tool holder: HSK 63 F Nsdpfjy Sxkrsx Aqqowh Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Input power type: 3-phase current Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Infinitely variable spindle speed Tool changer TT140 probe Note: Machine is supplied without enclosure. The zero-point clamping plates and other accessories shown in the images are not included in the scope of delivery.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Prvo zagonsko leto: 2002 Krmiljenje: Heidenhain iTNC530 Delovne ure stroja: sledi Nwedoyzz R Hspfx Aqqsh X-os: ca. 6.000 mm Y-os: ca. 3.500 mm Z-os: ca. 1.100 mm A-os: C-os: 2-osna rezkalna glava Maks. hitrost vretena: 14.000 min⁻¹ Dodatna oprema - Ohišje na obeh straneh Stanje stroja Popolnoma delujoč, v zelo dobrem stanju. Stroj je še vedno priključen na elektriko in je takoj na voljo.

Stanje: rabljeno, Leto izdelave: 1999, Dear customers, we are currently offering a used disc or platen sanding machine for model and mold making, from the brand Zimmermann. Here are the technical specifications for a machine of type SZ1: Disc diameter: 600 mm Table length: 755 mm Njdpfjywx Dijx Aqqswh Table width: 285 mm Table tilt: 30/45° Miter fence: 60/60° Power: 1.5 kW Speed: 1,000 rpm Forward/reverse rotation Dimensions: L 90 cm x W 65 cm x H 130 cm Weight: 290 kg We look forward to your questions and inquiries!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 4.486 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.500 mm, največja hitrost vrtenja: 18.000 obr/min, model krmilnika: Fidia C20 mit Bedienteil HPX, La máquina se encuentra en funcionamiento completo y en muy buenas condiciones. Está desmontada, almacenada y disponible de inmediato. DETALLES TÉCNICOS Recorrido del eje X: 3.000 mm Nedpsywgyrefx Aqqjwh Recorrido del eje Y: 2.360 mm Recorrido del eje Z: 1.500 mm Ángulo de rotación eje A: 105° Ángulo de rotación eje C: 300° Superficie de sujeción: 5.000 mm x 2.000 mm Carga admisible sobre mesa: 15.000 kg/m² Distancia entre ranuras en T: 18H12 / 250 mm Velocidad de avance X, Y, Z ejes: 20 m/min Aceleración de ejes X, Y, Z: 1,5 m/s² Máx. velocidad del husillo: 18.000 rpm Par de giro: 90 Nm Portaherramientas: HSK 63A DETALLES DE LA MÁQUINA Potencia del husillo: 28 kW Potencia conectada: 40 kW Fusible principal: 80 A Horas de trabajo del husillo: 4.486 h Horas totales de la máquina: 146.161 h Dimensiones y peso Espacio requerido por la máquina con periféricos (L x A x H): 7.300 x 5.600 x 5.600 mm Peso de la máquina: 16.500 kg EQUIPAMIENTO Carcasa de 3 lados, sin conductos de extracción

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 800 mm, pomik po osi Z: 400 mm, model krmilnika: Heidenhain TNC 426 PB, največja hitrost vretena: 9.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Povečan pritisk za oddajo – posebej ugodna ponudba! TEHNIČNE PODROBNOSTI Hodi X-os: 1.200 mm Hodi Y-os: 800 mm Hodi Z-os: 400 mm Strojna miza: 1.280 x 830 mm Število T-utorov: 3x 18 H10 Vrtljaji vretena: 9.000 1/min Vretenasti stožec: SK40 Moč vretena: 9 kW Navor vretena: 84 Nm Največja hitrost linearnih osi: do 30 m/min Izmenjevalec orodij: 24-kraten PODROBNOSTI O STROJU Krmiljenje: Heidenhain TNC 426 PB Priključni podatki: 400 V / 50 Hz Priključna moč: 32 kVA Nwjdpjywgvtefx Aqqeh Varovalka: 3x 63 A Transportne mere Mere (D x Š x V): 2525 x 2440 x 2700 mm Teža: 8.500 kg + 3 dodatna EU-paletna mesta, vsako 1200 x 800 x 2200 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.000 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 18.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 38 Nm, skupna masa: 65.000 kg, Initial commissioning: 2012 Control: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (below floor) with T-slots 18H12 / 250mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Nwedpfjyrdc Eox Aqqeh Frequency: 50 Hz Main fuse: 200 A Power demand: 85 kVA Dimensions, weights Space required (machine only, without peripherals): approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Opening doors on both sides - 10-station tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 68.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.200 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 167 Nm, skupna masa: 35.000 kg, Premiere mise en service : décembre 2014 Commande : Fidia Axe X : env. 2 200 mm Axe Y : env. 3 500 mm Axe Z : env. 1 200 mm Axe A : ± 100° Axe C : ± 275° Machine sous tension : env. 68 000 h Heures total broche : env. 26 500 h Table de bridage : 2 000 x 3 500 mm avec rainures en T Tête à fourche 2 axes Puissance broche : 70 kW Vitesse de broche : max. 15 000 tr/min Couple : max. 167 Nm Porte-outils : HSK 100A Nedpfsyrc Akex Aqqjwh Déblocage outil : hydraulique Entraînements axes linéaires Vitesse avance X, Y et Z : jusqu’à 50 m/min / 30 m/min Données de raccordement Tension : 400 V Fréquence : 50 Hz Dimensions, poids Encombrement machine hors périphériques : env. 8 000 x 6 000 x 5 000 mm Poids total : env. 35 000 kg Équipements supplémentaires - Installation de refroidissement - Changeur d’outils 26 positions - Carénage espace de travail - Convoyeur à copeaux En option, en supplément : - Palpeur de mesure radio - Laser BLUM État de la machine Entièrement fonctionnelle, en très bon état. Visible sous tension.

Stanje: generalkompletno obnovljen (rabljeno), Dear customers, we currently offer idler rollers as well as drive rollers for profile belt sanding machines from the brand F. Zimmermann. The rollers have been newly coated with a more durable material for improved longevity, then crowned ground and fitted with new bearings. You will receive fully refurbished rollers in exchange for your defective rollers! The rollers are suitable for the following machine types: Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Nodpjd S Eb Asfx Aqqewh Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing orders, please always specify the machine type and indicate which rollers you need and in what quantity. All items are in stock and can be delivered at short notice. If you have any further questions, I am happy to assist you!

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), številka stroja/vozila: 1095, Spoštovane stranke, trenutno vam ponujamo univerzalni rezkalni stroj za modelarstvo in orodjarstvo znamke Zimmermann. Tu so tehnični podatki stroja: Delovna miza: 630 x 490 mm Dodatna miza: 490 x 400 mm Krožno gibanje: 360° Nagib: 2x 90° Vpenjalni utor: 14 x 25 mm Moč: 1,1 kW Število vrtljajev: 560 - 14.000 min⁻¹ Nosilec orodja: ISO30 / SK30 - Motorna zavora - Motorizirano nastavljanje višine - Digitalni prikazovalnik z meritvami Heidenhain - CE označba - Omara s predali Potrebni prostor: 1.400 x 1.520 x 1.970 mm Teža: 790 kg Nwjdpfxsxy Ntqs Aqqoh Stroj je bil zaradi čiščenja v celoti razstavljen, vključno s podpornim delom. Tehnično in vizualno je stroj v odličnem stanju! Veselimo se vaših vprašanj in povpraševanj.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Initial commissioning: 2012 Control: Heidenhain iTNC 530 incl. HR 420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ±110° C-axis: ±300° Clamping Table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis Milling Head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 rpm Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blow air: external Linear Axis Drives Feed rate X, Y-axis: up to 50 m/min Feed rate Z-axis: up to 30 m/min Axis acceleration X, Y, Z: up to 2.5 m/s² Connection Data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, Weight Space requirement incl. peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Additional Equipment - Coolant supply with belt filter system - 30-position chain tool changer - Work area enclosure - Chip conveyor, right side Nwsdpfevy A Tnox Aqqeh Optional for an additional charge: - BLUM laser Machine condition Fully functional, very good condition. Already dismantled and in storage.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Nwsdpjwywcijfx Aqqoh Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Dear customers, We are currently offering, upon request/order, a refurbished table router, model FZ0 from F. Zimmermann. Below are the machine’s technical specifications: Work table: 590 x 420 mm Rotary movement: 360° Table tilt: 2x90° Milling spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: Collet chuck with locking nut Ø 8 mm - CE mark - Vernier stop - Plexiglass milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. Included with the machine are a tilting table and a set of milling tools – a fully equipped package! VAT will be listed separately on the invoice. Shipping available at an additional cost. Nwodpfxsxlzg He Aqqsh Current delivery time: 6 weeks Should you have any questions, please do not hesitate to contact us!

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 220, Spoštovani kupci, trenutno vam ponujamo zelo dobro rabljeni vertikalni tračni brusilni stroj blagovne znamke F. Zimmermann, primeren za izdelavo modelov in orodij. Tehnični podatki: Širina brusnega traku: 250 mm Višina brušenja: 400 mm Dolžina traku: 2.400 mm Hitrost brušenja: 18 m/s Delovna miza: 750 x 350 mm Nagib: 30/45° Moč: 4,0 kW Število vrtljajev: 1.400 o/min Premer priključka za odsesavanje: 120 mm Dimenzije: 990 x 850 x 1.740 mm Teža: 470 kg Oprema: - Nožno zasilno stikalo Nwjdpsxy Nrgjfx Aqqjh Cena brez DDV, ta bo na računu naveden posebej.

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 6.000 obr/min, obremenitev mize: 15.000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the machine's control unit was completely renewed for approx. €40,000! TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control: Fidia CXR with handwheel – new in 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: Hollow milling spindle with 78/8 flange and locknut Njdew N Nnbspfx Aqqowh Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet Tool unclamping: manual Note: For approx. €10,000, a spindle upgrade package can be retrofitted with the following spindle (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 Nm (S1) and 10.5 Nm (S6) In combination with the spindle upgrade, a new 6-position tool changer can also be acquired (cost approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 6.000 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 12.000 obr/min, model krmilnika: Heidenhain iTNC530 mit Handrad, Stroj s 4. osjo kot zasučno osjo & redno vzdrževanje s strani proizvajalca! TEHNIČNI PODATKI Delovna območja Os X: 3.000 mm Os Y: 6.000 mm Nodpfx Aqoxvx U Ajqswh Os Z: 1.250 mm Glava za rezkanje, os A: krmiljeno zasučna Rezkalno vreteno Moč vretena: 4,4 kW Hitrost vretena: 12.000 min⁻¹ Vpenjanje orodja: 78/8 prirobnica Menjava orodja: ročna z navojno matico Pogoni linearnih osi Premična hitrost osi X, Y, Z: do 20 m/min Pospešek osi X, Y, Z: do 1,5 m/s² PODROBNOSTI O STROJU Krmiljenje: Heidenhain iTNC530 z ročnim kolesom Priključna moč: cca 25 kW Predvarovalka: 42 A Dimenzije & teža Potrebni prostor stroja: cca 5.500 x 9.000 x 4.500 mm Skupna teža: 9.600 kg OPREMA Možnost predelave na visoko frekvenčno vreteno Pomembno: Miza in na fotografijah prikazana lesena plošča nista vključeni v obseg dobave.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.700 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 24.000 obr/min, obremenitev mize: 15.000 kg, The submission of a bid obligates the buyer to collect the item within the specified period, no later than 27.11.2025! The machine can still be viewed under power until calendar week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The control unit was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool interface: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminum Linear Axes Drives Rapid traverse speed X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Pre-fuse: 63 A Nodpfx Aoxr U Drjqqewh Dimensions & Weight Machine footprint: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer