Stas 50 Cub Cereal nakup rabljenega (40.942)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2010, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2010, Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: Mercedes-Benz Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: LM platišča; profil pnevmatike levo: 5 mm; profil pnevmatike desno: 3 mm Zadnja os 2: LM platišča; profil pnevmatike levo: 5 mm; profil pnevmatike desno: 5 mm Zadnja os 3: LM platišča; profil pnevmatike levo: 2 mm; profil pnevmatike desno: 4 mm Teže Lastna teža: 6.370 kg Kjdpey At Hvjfx Al Njdk Nosilnost: 32.630 kg Skupna dovoljena masa: 39.000 kg Stanje Poškodbe: nobene

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical body in width) Unladen weight: only 7,275 kg Z-chassis, cranked version Continuous 5 mm Hardox steel HB450 floor Front and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, internal access ladder 2-wing rear portal doors, pneumatic remote unlocking 1 piece GRAIN SLIDE in the right door wing Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure ALU landing legs, full-load rated 2x air vibrators below the body SAF axles with large disc brakes, 430 mm Kdsdpeyy Hakjfx Al Nok 1st axle: LIFT AXLE with traction aid WABCO Trailer-EBS with RSS rollover protection WABCO SmartBoard Automatic tip lowering Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, and with us also available immediately in FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration 10/2024, condition like NEW Dimensions (internal, LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight only 7,275 kg Z-chassis dropped version Floor made entirely of 5 mm Hardox steel HB450 Front wall and sidewalls 4/3 mm Hardox steel HB450 Inclined front wall, interior access ladder Twin-leaf portal doors, pneumatic secondary release 1 GRAIN SLIDE in the right door leaf Heavy-duty reinforced sliding roof, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators mounted beneath the body SAF axles with large 430 mm disc brakes Kjdpfx Asyxb E Eel Nedk 1st axle is a LIFT AXLE with starting aid WABCO Trailer EBS with RSS roll stability support WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING—now also available from us as FULL-SERVICE-RENTAL and ready for immediate delivery.

Stanje: rabljeno, največja dovoljena obremenitev: 34.928 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2024, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.280 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "AGRAR-LINER" First registration: 16.01.2024; Condition: like NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,280 mm (tapered design) Unladen weight: only 7,072 kg Z-chassis, cranked design Continuous floor in 4 mm Hardox steel HB450 Front wall and side walls in 3 mm Hardox steel HB450 Angled front wall, interior access steps Double-wing combined doors with swinging function, pneumatic secondary unlocking 2 x grain discharge slides, each with 1x dust protection bag Reinforced roll-over roof tarp HYVA tipping cylinder, Alpha type, suitable for high & low pressure Full-load ALU landing legs 2x pneumatic vibrators underneath the superstructure SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with Rollover Stability Support (RSS) WABCO Smartboard Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Kdsdpfxsyv T Sxo Al Njk Mounting holders for shovel and broom Toolbox on the right 4x LED reversing spotlights RENTING is the new BUYING: Full-service rental available immediately from us

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering function Kdodpfx Aexriu Eel Nek Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl Kdedpfxefakkcj Al Nok

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 50 m³, Chassis ALU chassis, aluminum alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminum parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability with integrated tipping bearing shaft fitted with wear-resistant special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated inside a plastic tube. Axles and Suspension Disc Brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension system, raising and lowering valve, load pressure gauge, third axle automatically liftable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread remaining, on silver steel rims, size 11.75x22.5 ET 120. Landing Legs Mechanical landing gears, load capacity 2 x 20 tonnes, with pivoting feet for use with air suspension systems. Brake System According to E.G. standard, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M with RSS (Roll Stability Support), ALU air reservoir. Electrical System According to StVZO regulations with 2 five-chamber Aspöck LED taillights, 24-volt system with two 7-pin and one 15-pin front sockets, EBS socket, side LED outline markers, 2 clearance lights, 2 separate LED reversing lights. Tipping Body/Tipper Body Aluminum tipper body, side walls with welded vertical aluminum profiles, approx. 6 mm floor of highly wear-resistant aluminum alloy (5383H34), Brinell HB 110, sloping front wall of 4 mm aluminum with reinforcing profiles for tipping cylinder bracket, side walls 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and wing door (2/3-1/3 split), with double hinge, made of 4 mm aluminum, single grain discharge slide with water protection, wear plates on the side approx. 400-1,000mm x 3,000mm x 4mm. Kdsdsxf Spfepfx Al Nek Hydraulic System Hydraulic cylinder mounted on front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2m hydraulic hose and loose half 1". Accessories 6 Parlok plastic mudguards with 2 Stas mudflaps, 3 m aluminum ladder, reinforced collapsible underrun protection with 2 towing eyes, one foldable side guard, walkway on bulkhead with left-hand access ladder, 3 ALU bows with swing function, one central additional bow holder, roll tarp with central ALU tube, roll tarp system, tarp material quality approx. 660g/m², tarp fastener with quick-release catch (no tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous spray guard fitted on underrun protection, etc. Offer and pictures non-binding.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 10.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 50 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension, Disc brakes 430 mm “off-road version” SAF-Intradisc axle units 3 x 9 t with SAF air suspension, airbags centrally positioned to chassis longitudinal beam, 1st axle liftable with start-up aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, 3rd axle with trailing steering, electrically lockable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 40-50% tread, with Alcoa "satin" aluminium rims 11.75 x 22.5 ET 120, UNI wheel bolts for aluminium rims. Landing Legs Mechanical version, single-side operation with two speeds, swing foot for air suspension, 2x20t support load. Ksdpfx Aoxf Sn Iel Nsdk Braking System According to EU standard, two-line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability-System), Wabco Smartboard Infocenter, aluminium air reservoir system. Electrical System According to German Road Traffic Licensing Regulations (StVZO), with two five-chamber lamps type Aspöck Ecopoint 2, 24V system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines are neatly routed in plastic conduit. Tipping Body / Tipper Body, Inside Fully Welded Aluminium tipper body, sidewalls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded. Floor 8 mm wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight; rear wall double-leaf door, straight, with two doors in 1/2-1/2 design, each with a grain chute. Air vibrators under the floor with pneumatic operation, rear spreader made from aluminium, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System, Tipping Cylinder with “Cardan” Suspension, 7,630 mm lift Hydraulic cylinder mounted on front wall, working pressure 220 bar, brand Hyva, 220 bar, approx. 2.5 m hydraulic hose and loose 1" half coupling, tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, full-width spray flaps on underrun bar, ALU spare wheel holder, foldable right side underrun protection, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swinging bows, raised approx. 150 mm in centre, tarpaulin with central light strip and separate reinforcement in wear areas, approx. 660 g/m2 quality, with rolling tarpaulin system, circumferential rubber cord at rear closure with two tension hooks to be fixed to rear swing bow, walkway at tipper body with access on left, side tarpaulin closure with tension straps, rear tarpaulin closure with welded-in rubber cord for water protection, robust foldable aluminium underrun protection with two towing eyes left & right incl. locking pins, 2 “Clear-Pass” mud flaps on wheel arch to EU standard, etc. Offer and photos subject to change.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Kjdpfxeyh S Ais Al Nedk Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Kdjdpefi Nmwefx Al Nsk Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Kdjdpfsfi Nmpjx Al Nok Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release. Kdedpfx Alegcw Rio Nok

Stanje: dober (rabljeno), prevoženi kilometri: 374.947 km, moč: 368 kW (500,34 KM), prva registracija: 07/2019, vrsta goriva: dizel, velikost pnevmatike: 385/65R22,5, konfiguracija osi: 4x2, medosna razdalja: 4.800 mm, gorivo: dizel, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 8.680 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, dolžina tovornega prostora: 5.830 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.110 mm, Leto izdelave: 2019, Oprema: ABS, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Hydraulic system - Manual - Power take-off (PTO) - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Kerb weight: 9,445 kg, Gross weight: 19,500 kg, Total tank capacity: 780 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Warning lights, Engine power: 368 kW (493 hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: Automatic, Gearbox make: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Power take-off, PTO type: 1, Starter battery, Number of sides: 1 side, Pump, Central locking, Seats: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 14 mm; Right tire tread: 12 mm; Suspension: leaf spring Axle 2: Tire size: 315/80R22.5; Twin tyres; Left inner tread: 13 mm; Left outer tread: 14 mm; Right inner tread: 11 mm; Right outer tread: 12 mm; Suspension: air suspension Weights Kerb weight: 9,445 kg Payload: 10,055 kg GVW: 19,500 kg Operational Load platform height: 153 cm Pump: yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Lease price: €714 per month (default, 60 months); Please request further information and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price classes. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing stock • Reliable quality • Good prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The assurance of recognized quality • And much more... Please visit our website for special offers and the complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Kdodpfxsxmrqlo Al Njk Ask directly about our European warranty packages.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Kjdpfx Aogcw Rmjl Nodk Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: rabljeno, kapaciteta rezervoarja: 50 l, SPLOŠNO Oblika: stoječa Opombe: Pokrov iz 1.4541 (V2A); Posoda z majhnimi udrtinami Notranji premer: 450 mm Skupna višina: 360 mm Zgornji pokrov: odprt z ohlapnim pokrovom Lokacija: Bremen Prostornina: 50 litrov Material v stiku s produktom: V4A 1.4429 (AISI316) Stanje: rabljeno Kedoyci Axspfx Al Nedk Valjasta višina: 320 mm Zadnja uporaba: kozmetika POSODA Tip stojala: stojna obroba OPREMA Iztek: ni prisoten LASTNOSTI MATERIALA Material zgornjega pokrova: AISI304 (V2A) 1.4541

Stanje: rabljeno, kapaciteta rezervoarja: 50 l, SPLOŠNO Tip konstrukcije: stoječa Opombe: Podporni obroč iz 1.4541 (V2A); ročna odprtina približno 800 x 970 mm; 1 stranski priključek premera približno 10 mm v spodnjem delu valja (ne najnižja točka; brez izliva z dna); 1 manjša udrtina v prehodu iz valja v zgornje dno; majhne udrtine v spodnjem dnu Notranji premer: 390 mm Skupna višina: 660 mm Kodpfsyclttjx Al Nsdk Lokacija: Bremen Prostornina: 50 litrov Material v stiku z izdelkom: V4A 1.4401/04 (AISI316) Stanje: rabljeno Zadnja uporaba: farmacija POSODA Stojna izvedba: podporni obroč OPREMA Ročna odprtina / kupola: ročna odprtina

Leto izdelave: 2016, obratovalne ure: 20.000 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Vertikalna nerjavna rezervoar 50 m³ s plaščem. Premer 3 m, dolžina valja 6,3 m, stožec 2,4 m. Debelina stene 6 mm pri osnovi in stožec 8 mm. Stena plašča 5 mm. Vrsta jekla 12Х18Н10t. Kdodpfxjyxx Ans Al Nek

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture Kodpfsqy E Rlsx Al Njdk TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Stanje: rabljeno, 2-cylinder vertical stainless steel agitator tanks, used Capacity: 50 m³ Order number: 3810 Material: 1.4401 (product-contacting surfaces) 1.4301 (other parts) Internal weld seams Kodpev Dthwsfx Al Njdk Food-grade ground finish Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylindrical height 350 mm top dished end 500 mm bottom dished end 400 mm ground clearance Approx. 8,250 mm total height Design: Vertical cylindrical design on base ring With conical ends Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm Double jacket on cylinder with 2 circuits, approx. 14 m², each 76 l and on bottom end, 1 circuit, approx. 5 m², 90 l Operating overpressure 2 bar 50 mm PU foam insulation around cylinder, top end, and base ring; stainless steel cover With manufacturer’s certificate and material attestations Connections: 1 manway 340 x 440 mm in the cylinder Vent Ø 300 mm with spray head in the top end Bottom central outlet DN 65, extended Weight: approx. 6.5 t

Stanje: rabljeno, Proizvodna linija za varjene cevi iz nerjavečega jekla MOD.50/60, proizvajalec OLIMPIA 80 Kdjdpsymautsfx Al Njk Z varilcem TIG, valjem za zvarni šiv in orbitalnim poliranjem Specifikacije: - Premer: 18 – 63,5 mm - Debelina: 0,5 – 3 mm - Dolžina: 3 – 6 m - Hitrost: do 3 m/min

Stanje: rabljeno, Ta ponudba se nanaša na mešalnik in tehtalno platformo Pall Allegro 50 L Standard. Enota je v popolnem delovnem stanju in je takoj na voljo. Mešalnik in tehtalna platforma Pall Allegro 50 L Standard predstavljata robustno in vsestransko rešitev, zasnovano za enkratno uporabo v bioprocesnih aplikacijah v farmacevtski in biotehnološki industriji. Sistem je inženirsko optimiziran za dosledno, ponovljivo mešanje ter podpira ključne procese v zgornjih in spodnjih tokih, vključno s pripravo pufrov, mešanjem gojišč ter formulacijskimi postopki. Platforma vključuje visokonatančno tehtanje ter zanesljiv mešalni sistem, kar zagotavlja vrhunski nadzor procesov v kompaktnem, enostavno čistljivem ogrodju iz nerjavnega jekla. Združljivost s Pall Allegro mešalniki za enkratno uporabo omogoča prilagodljivo in sterilno uporabo v različnih aplikacijah. Ključne značilnosti: - Integrirana zasnova – Mešanje in tehtanje v enem kompaktnem sistemu - Združljivost za enkratno uporabo – Popolnoma združljiv z enim Pall Allegro 2D mešalnim vložkom - Visoka natančnost tehtanja – Natančne tehtalne celice za zanesljiv nadzor mase in dokumentacijo serij - Uporabniku prijazen vmesnik – Preprost nadzorni panel z nastavljivo hitrostjo in profili mešanja - Higienska konstrukcija – Okvir iz nerjavnega jekla z gladkimi površinami za skladnost s GMP - Prilagodljivost zmogljivosti – Idealno za pilotsko proizvodnjo in manjše komercialne serije Tehnične specifikacije: - Model: Allegro 50 L Standard Mixer & Weigh Platform - Volumen mešanja: do 50 litrov - Tip mešala: Magnetno gnano lopatično mešalo - Material platforme: Nerjavno jeklo 304 - Nosilnost: do 100 kg - Dimenzije (pribl.): 600 mm × 600 mm × 1100 mm - Napajanje: 100–240 V AC / 50–60 Hz - Krmilni sistem: Vgrajen zaslon na dotik - Proizvajalec: Pall Corporation Uporaba: Kedpoxl Dpdjfx Al Nsdk - Biofarmacevtska proizvodnja – Priprava gojišč, pufrov, formulacija in procesi shranjevanja - Klinična proizvodnja – Prilagodljiva uporaba v majhnih GMP proizvodnjah - Proizvodnja cepiv – Sterilna priprava in mešanje komponent - Terapija z geni in celicami – Podpira sterilne, zaprte procese - Razvojni laboratoriji – Idealno za povečanje obsega enkratnih tehnologij Prednosti: - Sterilna obdelava – Podpira enkratne vrečke za zmanjšanje tveganja kontaminacije - Kompaktna zasnova – Enostavno umeščanje v laboratorijska in proizvodna okolja - Natančno odmerjanje – Integriran tehtalni sistem za natančen nadzor procesov - Skrajšan čas čiščenja – Ni potrebe po CIP/SIP zaradi enkratnih mešalnih vrečk - Kakovost Pall – Izdelek uglednega vodilnega proizvajalca v bioprocesnih tehnologijah.

Leto izdelave: 1994, stanje: rabljeno, - Letnik izdelave: 1994 - Dokumentacija na voljo: Da - CE certifikat: Ne - Serijska številka: 40640000 - Upravljanje: Konvencionalno Finančne informacije DDV: Navajena cena je brez DDV DDV/Obdavčitev razlike: DDV je odbitna za podjetja Dobava in odkup možna kadarkoli za vse iz industrijskega področja Kdedpfxewnhl Re Al Nsk Lukas van Rossum

Stanje: novo, Ostas 4-valjna okrogla krivilka 4R OHS 1570 x 150 Hidravlični premik stranskih valjev 3 digitalni prikazovalniki Hidravlično nagibno ležišče Kaljeni valji Naprava za konusno krivljenje Ločen upravljalni pult Kdodsxrc Dtopfx Al Njk Dolžina valjev: 1570 mm Premer zgornjega valja: 150 mm Premer stranskih valjev: 130 mm Skupna moč motorjev: 4+3 kW Teža: 2470 kg Dimenzije (mm): 3350 x 1200 x 1210 (D x Š x V) Tehnični podatki o krivljenju 6 mm pri najmanjšem notranjem premeru (5 x zgornji valj) 4 mm pri najmanjšem notranjem premeru (1,5 x zgornji valj) Tehnični podatki o predkrivanju 4 mm pri najmanjšem notranjem premeru (5 x zgornji valj) 3 mm pri najmanjšem notranjem premeru (1,5 x zgornji valj) Vse zmogljivosti krivljenja so izračunane na osnovi 250 N/mm2 meje tečenja Material (ST 37 - ST 42 konstrukcijsko jeklo)

Stanje: novo, Ostas 3-Roller Plate Bending Machine SMR-S 1070 x 150 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display - Sheet width: 1070 mm - Maximum sheet thickness: 8.0 mm - Pre-bending sheet thickness: 7.0 mm - Roller length: 1070 mm - Smallest bending diameter: 225 mm - Roller diameter: 150 mm - Weight: 1400 kg - Dimensions (LxWxH): 2600 x 630 x 1020 mm - Motor power: 4.5 kW Features: - Electrically driven top and bottom rollers - Swiveling top roller Kdsdpfx Ajiw D Ecjl Njk - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operator panel - Safety wire, CE mark Specifications apply for St-37 / 240 N/mm²

Stanje: novo, Ostas 4-rouleaux cintreuse 4R OHS 2570 x 250 Ajustement hydraulique des rouleaux latéraux 3 afficheurs digitaux Paliers d'ouverture hydrauliques Rouleaux trempés Dispositif de cintrage conique Pupitre de commande séparé Longueur de rouleaux : 2570 mm Diamètre rouleau supérieur : 250 mm Diamètre rouleaux latéraux : 200 mm Puissance totale moteurs : 7,5+1,5 kW Kdjdpfxexrdcds Al Nek Poids : 6300 kg Dimensions (mm) : 4550 x 1550 x 1470 (L x l x H) Données de performance de roulage : 10 mm avec diamètre intérieur minimum (5 x rouleau supérieur) 8 mm avec diamètre intérieur minimum (1,5 x rouleau supérieur) Données de pré-cintrage : 8 mm avec diamètre intérieur minimum (5 x rouleau supérieur) 6 mm avec diamètre intérieur minimum (1,5 x rouleau supérieur) Toutes les capacités de cintrage sont calculées sur la base d'une limite d'élasticité de 250 N/mm2 Matériau : (acier de construction ST 37 – ST 42) Les images présentées sont des exemples à titre illustratif uniquement.