Schrã¤Nkautomat nakup rabljenega (229)

Stanje: rabljeno, Vollmer AT setting machine Dujdpfx Apscbn Rhelot with clamping rail for frame saws

Stanje: zelo dobro (rabljeno), Binder temperature test chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclical temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in the range of -40 °C to +180 °C and offers an efficient alternative to custom-tailored solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x cable ports Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Nominal voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: Dujdpfxsy Nic Ho Apljt The following checks and procedures are carried out on all our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented trial run. Condition: Used Scope of delivery: Delivery contents as shown in the images Inspection possible by appointment. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Stanje: zelo dobro (rabljeno), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale: Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in a range from -40°C to +180°C, providing an efficient alternative to custom-built solutions. Technical Specifications: Temperature range: -40°C to +180°C Test chamber volume: approx. 228 liters Temperature Performance Data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cool-down time from +180°C to -40°C: approx. 110 minutes Test Chamber: Dusdpoy Nicmofx Aplst Internal dimensions: Approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: Approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x cable ports, Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of Delivery: Scope of delivery as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sale without warranty. (Subject to technical changes and errors)

Stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber Model: WT3-600/70/5 Manufacturer: Weiss Umwelttechnik For sale is a high-quality Weiss WT3-600/70/5 temperature test chamber, suitable for professional temperature testing in industrial applications, research, development, and quality assurance. The unit features a modern S!MCON / 32 controller with touch panel for convenient operation and programming of test sequences. This chamber is water-cooled and designed for demanding temperature tests within a range of -70°C to +180°C. Features: Dusdpfx Apsy Nibpolot - S!MCON / 32 controller - Control unit with touch panel - Adjustable leveling feet - Cable ports left and right - R1 port, nominal width 125 mm - L1 port, nominal width 50 mm - Test chamber lighting - Water-cooled design Technical Data: - Temperature range: -70°C to +180°C - Test chamber volume: approx. 600 liters - Internal dimensions: approx. 800 x 950 x 800 mm (W x H x D) Temperature Performance Data: - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K - Heating rate: approx. 7.5 K/min - Cooling rate: approx. 7.5 K/min - Heat compensation: max. 2500 W Electrical Data: - Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: approx. 23 A - Rated power: approx. 13 kW - Fuse protection: 16 A slow-blow Refrigerants: - R404A / R23 Dimensions: With hinges and door lock: approx. 1090 x 1995 x 1660 mm (W x H x D) Without hinges and door lock: approx. 1000 x 1995 x 1660 mm (W x H x D) Weight: - approx. 620 kg Sound Pressure Level: - approx. 58 dB(A) Condition: - Used Scope of Delivery: - As shown in the photos Inspection possible by appointment. Loading can be organized. Sale without warranty. (Subject to change and errors excepted)

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Version: water-cooled For sale is a CTS climate test chamber for temperature and climatic testing in industry, research, development, and quality assurance. Condition / Display: Used device, visual condition as shown in the pictures. Display in manual operation / stop. Current temperature: 16.59 °C Set temperature: 5.00 °C Current humidity: 39.7% rH Water reservoir: 11.0 l Special features: Extended temperature range up to +210 °C (many standard models only up to +180 °C) Technical data: Dujdpfx Apoy I Tdxjlet Temperature range: -70 °C to +210 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerants: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on configuration) Features: Viewing window Stainless steel test chamber Digital display for set/actual values Test item protection / temperature limiter DI water connection Condensate drain Cable ports RS232 interface Digital outputs for test item control Scope of delivery: CTS climate test chamber C-70/600 Scope of delivery as pictured Service / Preparation: Function check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection by appointment possible Loading can be organized Commercial sale – Sold without warranty. (Misprints and errors excepted)

Leto izdelave: 2019, obratovalne ure: 3.577 h, stanje: zelo dobro (rabljeno), Weiss Climate Test Chamber ClimeEvent C/1000/70/5 Type: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of manufacture: 2019 Version: water-cooled Operating hours: approx. 3577 h For sale is a Weiss ClimeEvent climate test chamber with a 1000-liter test space. Suitable for temperature and climate testing in industrial, automotive, electronics as well as research and development applications. Temperature and climate data: Dujdpfxoy Iyx As Aplst Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10% to 98% relative humidity Test chamber: Volume: approx. 1000 liters Internal dimensions: approx. 950 x 1100 x 950 mm Dimensions: External dimensions: approx. 2000 x 1415 x 2030 mm Electrical data: Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A R23 Weight: approx. 1300 kg Applications: Temperature tests Climatic tests with humidity Thermal cycling tests Endurance tests Condition: Used Unit was last in operation Scope of delivery: Weiss ClimeEvent C/1000/70/5 Accessories as shown in pictures Inspection possible by appointment. Loading can be organized. Sale without warranty. (Subject to modifications)

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/1000-S Equipment Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Version: Climate test chamber / Environmental simulation chamber Cooling: Water cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability tests. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% relative humidity Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Program mode Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable ports Feedthroughs approx. 50 mm and 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on casters Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Notifications and digital channels Duedpfxoy Iam He Apljt Site plan Quick reference guide Humidity diagram Scope of Delivery CTS climate test chamber C-70/1000-S Documentation as available Scope of delivery as shown Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Equipment Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate test chamber Cooling: water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Ideal for use in research, development, and quality assurance. Operating Condition Display: Manual operation / stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7 % RH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Dusdpfx Apjy H H D Aoljt Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with protocol Condition Used. Condition as shown in photos. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climatic Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climatic test chamber Cooling: water-cooled Description Used climatic test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Pre-cooling compressor: 11,432 h Circulation pump: 2,905 h Technical Data Djdpfx Apjy H Hmwoljut Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS Touch-/LCD control unit Program operation Sample protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refill possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Ports 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climatic Test Chamber CS-70/600-5/S Documentation / test certificates (if available) Service prior to delivery (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition as per photos. Note Used device, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. For use in industry, research, and quality assurance. Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Cooling System Refrigerant: R404A / R23 Cascade refrigeration system Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Dedey H Hl Hspfx Aplout Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (as far as available) Pre-delivery service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Cosmetic condition as per images. Note Used device, sale without warranty. Viewing possible by arrangement. Loading and transport can be organized on request. Specifications subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: water-cooled Description Used temperature shock test chamber from CTS. Suitable for thermal shock and cyclic temperature testing. Applications in industry, research, and quality assurance. Application Areas - Material testing - Aging tests - Electronic and component testing - Temperature shock testing - Automotive and quality assurance Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual value display - 2-zone system - Transfer basket for rapid change - Viewing window - Integrated control cabinet - Cooling water connections Technical Specifications - Separate hot and cold chambers - Stainless steel test compartment - Industrial-grade design Dimensions External: 2335 x 940 x 1820 mm Insertion opening: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Wiring diagram and piping layout - Spare parts list Pre-shipment Service (optional) - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Optical condition as per photos. Dujdpfxsy H Hk As Aplot Scope of Delivery - Test chamber TSS-70/350-A - Documentation (as far as available) Note Used device, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Stanje: pripravljen za uporabo (rabljen), Na voljo je obojestranski vrtalni stroj za steklo Schraml (Lisec-Group). Nagib stekla: 8°, maks. višina obdelave: 1300 mm, maks. dolžina stekla: 2500 mm, maks. debelina stekla: 40 mm, maks. premer vrtanja: 100 mm, število vrtljajev: 5000/min, mere stroja X/Y/Z: pribl. 3000 mm/900 mm/2000 mm, teža: pribl. 1500 kg. Ogled na lokaciji je mogoč. Duedpoy H I Ezsfx Aplet

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/350-A Water-Cooled Refrigeration Unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is used for conducting thermal shock tests and is typically utilized in industry, research, and quality assurance. Areas of Application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Dedpey Hkgbofx Apleut Cold chamber: -70°C to +100°C Electrical Data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerants: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg water-cooled Features / Equipment: - CTS control unit with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital setpoint and actual value display - 2-zone system (hot and cold chamber) - Automatic transfer basket for shock tests Technical Design: - Hot and cold chambers separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Shelf/grate - Inspection window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: Approx. 950 kg Further Information: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/130 Water-cooled Refrigeration Unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The unit is designed for conducting temperature shock tests and is typically used in industry, research, and quality assurance environments. Applications: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Specifications: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: ±1 K (temporal) ±2 K (spatial) Temperature change rate: max. 100 K/min on average for shock testing (without radiant heat) Transfer time between chambers: ≤ 15 min within the range -65°C to +200°C (with 10 kg ICs) Switching time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 16.7 kW Rated current: approx. 26.8 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigerant system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control unit - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user-side test piece control - Fault message on potential-free contact (load up to 30 V DC, 2 A) - EMC tested Technical Design: - Hot and cold chambers - Transport trolley with spindle drive - Test chamber / trolley made of stainless steel, material no. 1.4301 - Stainless steel wire basket - Feedthrough pipe NW 50 with sealing plug - Compressed air connection 1/4" male - Condensate drain non-pressurized R 1/2" female - Safety door lock - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Clearance dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Other Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Dodpey Hkfdofx Apljut Condition: used Scope of delivery: see pictures (Technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A Djdpfey Hkd Hjx Apljut - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber Model: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber from CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for simulating a wide range of environmental conditions and is typically used in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, such as: - Material tests - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to the spacious test chamber (1000 liters) and advanced control technology, both rapid temperature changes and long-term constant tests can be performed. The unit is water-cooled, ensuring stable and efficient operation. Technical specifications: Model: CS-70/1000-5 Test chamber volume: approx. 1000 liters Control system: Djdpoy Hkc Aefx Aplsut - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe/cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: –70 °C to +180 °C Change rate: up to 5 K/min Temperature stability: ± 0.3 K Climatic data (humidity): Humidity range: 10% to 98% rH Dew point range: –10 °C to +94 °C Dimensions: External (HxWxD): approx. 1950 × 1270 × 2245 mm Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: Connection: 400 V / 3/N / 50 Hz Power: 17.6 kW Rated current: 28.5 A Refrigeration system: R452A – 5.1 kg – GWP 2140 R23 – 2.1 kg – GWP 14800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 22 Weight: approx. 900 kg For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Documented test run Condition: used The device can be fully inspected as seen in the images. Display: STOP / manual operation Scope of delivery: CTS climate test chamber CS-70/1000-5 Scope of supply as shown in the pictures Inspection possible by appointment. Loading by forklift can be arranged. (Specifications may be subject to change and errors!) For any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, ideal for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industrial applications. The unit is in used condition and can be fully inspected as shown in the photos. Current display: Manual operation / Stop. Operating hours as per display: Technical data: Temperature range: -70°C to +180°C Humidity range: 10% to 98% RH Dew point range: -10°C to +94°C Test chamber volume: 600 liters Temperature change rate according to IEC 60068-3-5: Heating: 6.0 K/min Cooling: 7.0 K/min Electrical connection: 400 V 3/N 50 Hz Rated power: 14.6 kW Rated current: 22.0 A Protection class: IP 22 Refrigerants: R404A / R23 Pre-cooling stage: R404A – 4.5 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 17.65 t / 31.08 t Duedpfx Aey Hkbleplot GWP: 3922 / 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in door Stainless steel test chamber LED chamber lighting CTS LCD control panel with digital controls Specimen protection / temperature limiter Water-cooled refrigeration unit Automatic water top-up / deionized water inlet Test chamber and condensate drain Volt-free contact Digital outputs RS232 interface Ethernet interface Lateral cable ports Cable ports according to layout: 1x port NW 50 2x ports NW 125 Test chamber dimensions according to layout: approx. 850 x 850 x 830 mm External dimensions according to layout: approx. 1900 x 1120 x 1875 mm Weight / mass according to documentation: approx. 750 kg Scope of delivery: CTS climate test chamber CS-70/600-5 including available documentation / test certificates Scope of delivery as shown in the photos For your security as the buyer: The device can be inspected by appointment. Loading by forklift can be arranged. If you have any questions, please feel free to contact us. For your security as the buyer, please note the following! The following points are completed on our offered chambers before sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Subject to technical changes and errors in the specifications!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber type C-70/600 for precise temperature and climate testing in research, development, quality assurance, and industrial applications. The device is pre-owned and condition is fully visible in the photos. The current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7 % RH, and actual water reservoir 11.0 l. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerants: R404A (precooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control unit with digital actual/setpoint display Dujdoy Hkazjpfx Apljt Specimen protection / temperature limiter Water connection / DI water supply Test chamber and condensate drain Tube feedthroughs on the side of the test chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (per documentation): approx. 850 x 850 x 830 mm External dimensions (per documentation): approx. 1900 x 1115 x 1850 mm Weight (per documentation): approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including available documentation / operating instructions Scope of delivery as shown in the photos For your security as a buyer: The device can be inspected by appointment. Loading by forklift can be arranged. For your security as a buyer, please note the following procedures! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if needed 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used (Subject to change and errors in the technical data and information!) Further questions can gladly be answered by phone.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 10.000 kg, Mobilna nakladalna rampa Schrader CT8 - MG, nosilnost 10 t. Vrhunsko stanje, takoj pripravljena za uporabo. Dujdpfx Aey D D H Njplot

Stanje: zelo dobro (rabljeno), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled For sale is a used temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This model is a temperature-only test chamber without humidity function. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is commonly used in industry, research & development, and quality assurance. Dedpfx Asy At Sxeplout Temperature range: -70°C to +180°C. The unit heats up and cools down quickly and utilizes recirculating air for uniform temperature distribution inside the chamber. Cable ports of 125 mm and 50 mm are available. Technical Data: - Model: WT-600/70/5 - Cooling/heating operation: -70°C to +180°C - Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min - External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm - External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm - Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm - Test chamber volume: approx. 600 liters - Power supply: 3/N/PE AC 400V ±10% 50Hz - Rated power: 16 kW - Rated current: 19 A - Fuse (on-site): 29 A slow-blow - Maximum test specimen weight: Total load on shelf supports: 80 kg Test chamber floor: 80 kg, removable shelf: 40 kg - Refrigerants: R 404A / R23 - Weight: 675 kg Important information for buyers – your safety matters to us! The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful testing, all chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Technical specifications and details are subject to change without notice. Errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 2004, Schraml TopDrill dvoglavi stroj za vrtanje stekla. Največja višina vrtanja 1300 mm. Samodejna nastavitev višine. Samodejno doziranje vode. V popolnoma delujočem stanju! Duodpjywtn Asfx Aplet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the enhanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-grade safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. It is a fully functional, tested unit that originally had transport damage to the housing. This was professionally repaired and repainted. Technically flawless – visually in very good condition 100% functional – no restrictions Price advantage: €1000 cheaper than comparable units Special Added Value: Duedpoyyw E Rsfx Apljt The device is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire / flames, no explosion). What exactly can the unit do? (Section 2 – Performance & Applications) - Conducting aging tests on lithium-ion cells - Performance tests (charging/discharging cycles at temperature) - Continuous temperature runs and temperature cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable chamber - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test labs and safety test facilities - Automotive / E-Mobility / Energy storage The P Plus package turns the KB 720 into a true battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Fire detector with visual & audible alarm - Mechanical double-door locking (safe containment) - Spark protection in the interior - Exhaust port with reversible overpressure flap - Connections for external inertization (e.g., nitrogen) - Emergency shutdown / manual triggering of extinguishing system - Feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. Not for abuse or destructive testing, but a safe, standards-compliant test chamber for real-world operational and fault scenarios. Key Technical Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse protection: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm - Weight: approx. 285–300 kg In Summary – Why this Device is Special: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market & resale appeal Documents & Downloads Condition: used Scope of delivery: (See pictures) (Technical data subject to change and errors excepted!) Further questions can be answered for you by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Modular Plant Growth Cabinets Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton lighting module - Temperature range: +5°C to +45°C for temperature testing - Test chamber volume: approx. 1300 l - Simpac controller - Network connection - USB port Fitotron® HGC series plant growth chambers are designed with a modular system. Individual modules can be added or replaced as required, allowing the unit to be adapted for diverse applications. Ideally suited for high-light-requirement plants such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400W/D and 100W Temperature range: +5°C to +45°C Temporal temperature deviation: ±0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ±3 to 5% r.H. Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% r.H.: approx. 0.8 kW Dsdpfovz U Erox Aplsut Performance data for climate testing with irradiation - Temperature range: +10°C to +45°C with lights on - Temporal temperature deviation: ±0.5 K - Humidity range: 40% to 95% - Dew point range: +4°C to +35°C - Temporal humidity deviation: ±3 to 5% r.H. - Humidification/dehumidification system, test chamber stainless steel - Internal dimensions (H x D x W): 1400 mm x 750 mm x 1270 mm - External dimensions (H x D x W): 1985 mm x 980 mm x 2320 mm - External dimensions with lighting module: Height 2450 mm - Single door with observation window - Computer interface - Connection: 3/N/PE 400V ±10% 50Hz - CE marked, mobile, in very good condition - Pipe penetration Ø 50 mm - Air cooling - Refrigerant: R404A - Weight: approx. 480 kg + 130 kg lighting module

Stanje: rabljeno, Število polic: 0 Širina polic: mm Globina polic: mm 770x50x1900 Zaklepov in ključev ni priloženih Morda primerno za restavracijo Dodpfeyyczwsx Apljut Tehnični podatki so podatki proizvajalca oziroma lastnika, zato za njih ne jamčimo. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O nas: več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavska zmogljivost 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, kontaktirajte nas. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: rabljeno, številka stroja/vozila: W09SG1334Y1S82156, konfiguracija osi: 3 osi, prva registracija: 07/2000, vzmetenje: zrak, velikost pnevmatike: 385/65R 22.5, barva: drugo, Leto izdelave: 2000, = Dodatne možnosti in oprema = - ADR - BPW osi - Kolutne zavore Dusdeyzqdiepfx Apljt = Dodatne informacije = Dimenzija pnevmatik: 385/65R 22.5 Znamka osi: BPW Vzmetenje: zračno vzmetenje Lastna teža: 6.160 kg Nosilnost: 27.840 kg Skupna dovoljena masa: 34.000 kg