Schraubenkompressor / Screw Compressor

Eco-Air D 50

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 400 mm, pomik po osi Z: 425 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, vrtilni moment: 90 Nm, proizvajalec krmilnikov: Siemens, model krmilnika: 840D PL, skupna masa: 10.000 kg, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 25 letvica, število vreten: 1, število mest v zalogovniku orodij: 20, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. Should you require a probe or any other additional option, we can retrofit these at extra cost. FZ15W with 4th and 5th axis Machine dimensions: approx. 4,200 mm x 2,400 mm Travel paths: -X = 730 mm -Y = 400 mm -Z = 425 mm Control system: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90 Nm Tool changer: -Tool stations: 20 Workpiece changer: -Peiseler table with Afro controller Dwodpfx Agewpcfusgod Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry is in top condition: -HS runout: 0.008 mm -QC20 measurement: 12.6 μm (manufacturer tolerance 18 μm for new machines, 23 μm for used machines) The machine can be inspected under power at any time.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, A machining center is available. Travel range X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, spindle speed: 10,500 rpm, tool stations: 20, tool holder: SK40, table load capacity: 300kg, control system: Siemens Sinumerik. The machine screen is defective. Documentation is available. On-site inspection possible. Dsdpfewxfa Hsx Aggswd

Leto izdelave: 1990, stanje: dober (rabljeno), Compressor system with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Height: 1000 mm Dwjdjinur Aopfx Aggod Flow rate: 1.5 m³/min Power: 11 kW

Stanje: zelo dobro (rabljeno), CHIRON DZ 18.2 KW, Baujahr 2012 Steuerung: Fanuc 31i Verfahrwege: X/Y/Z 630 x 520 x 400 mm Palettenwechsler: 2 x 940 x 470 mm Doppelspindel-Ausführung Spindelabstand: 320 mm 2 x 32-fach Werkzeugwechsler Werkzeugaufnahme: SK40 Max. Spindeldrehzahl: 10.000 U/min Dodpfjuviiwjx Aggewd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, X travel: 2500 mm Y travel: 800 mm Z travel: 750 mm Dwodexa Hl Djpfx Aggjd Control: HEIDENHAIN TNC430i Table size (lengthwise): 3220 mm Table size (crosswise): 800 mm Tool holder: ISO SK40 Spindle speed: 15,000 rpm Connected load: 25 kVA Tool changer: 40 positions Machine weight: approx. 20 t Space requirements: approx. 6.5 x 3.8 x 3.7 m This HEDELIUS BC80 is in good condition and can be inspected under power by arrangement with the seller. Description: Model: Hedelius BC80 Type: 4-axis machining center Control: Heidenhain TNC430i Year of manufacture: 2000 X-axis travel: 2500 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Clamping area table: 3220 x 800 mm Tool holder: SK40 Tool changer: 40 stations Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Rinsing guns - Tool measurement system Renishaw TS27R - Workpiece measurement system Renishaw infrared - Ethernet connection - Manual control module Miscellaneous: - Ball screws on X and Y axes replaced in 2018 - Complete documentation available Machine weight: approx. 20 t Footprint: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Na voljo so 3 kompresorji Kaeser, 2 kompresorja Atlas Copco in 2 hladilna sušilca Kaeser. 1) Kompresor Kaeser CS 75, leto izdelave: 1992, delovni tlak: 10 bar, delovnih ur: 38265. 2) Kompresor Kaeser AS 44, leto izdelave: 1999, delovni tlak: 8,5 bar, delovnih ur: 41564. 3) Kompresor Kaeser BS 60, leto izdelave: 1983, delovni tlak: 7,5 bar, delovnih ur: 50674. 4) Kompresor Atlas Copco GA 45, leto izdelave: 1990, delovni tlak: 10 bar, delovnih ur: 26831. 5) Kompresor Atlas Copco GA 45, leto izdelave: 1990, delovni tlak: 10 bar, delovnih ur: 52447. 6) Hladilni sušilec Kaeser TD 51, leto izdelave: 1997, hladilno sredstvo: R22. 7) Hladilni sušilec Kaeser TE 76, leto izdelave: 1996, hladilno sredstvo: R22. Dokumentacija je na voljo. Možen je ogled na kraju samem. Dwjdpfeulkvdex Aggjd

Stanje: novo, Leto izdelave: 2023, Avtomatski stružni stroj s pomično glavo K'MX 920 CLEVER je zasnovan za obdelavo kompleksnih obdelovancev do premera Ø 20 mm. Dwsdpfxok Dz Dis Aggjd Stružnica je serijsko opremljena z dvema elektrovretenoma, vsakim z največjo hitrostjo 12.000 min⁻¹. S svojimi devetimi osmi, kombinirano enoto (comb) + revolversko glavo na treh oseh ter neodvisno končno enoto, je ta stroj sposoben istočasne uporabe štirih orodij v materialu, kar omogoča optimiziran cikel obdelave. 9 linearnih osi 1 neodvisno regalno mesto z 10 pozicijami Prerez zunanjih orodij 12 x 12 mm Revolverska glava s 12 postajami

Stanje: rabljeno, Plate width: 2500 mm Plate depth: 5100 mm Plate height: 400 mm Weight approx. 9 t Required floor space approx. 2.5 x 5.1 x 0.40 m T-slot dimensions: 36 x 60 mm - Height: 61 mm Dodpfshpva Dex Aggswd Number of T-slots: 5 T-slot spacing: 460 mm Edge distance: 220 mm T-slot size: 36 mm

Stanje: zelo dobro (rabljeno), Zunanji Ø: 200 mm Izvrtina: 52 mm Dwsdpfx Aexazt Aoggsd Maks. hitrost: 4500 obr/min

Stanje: rabljeno, Leto izdelave: 2005, X travel 2000 (775 + 600) mm y travel 620 mm Z travel 520 mm Control Heidenhain iTNC 530 Spindle speed range main spindle 12,000 rpm Main spindle drive power 18 kW Table clamping surface 1,200 x 600 mm Rotary table diameter Ø 500 mm tiltable +15/-95 ° rotatable 0–360 ° Max. table load 1000 / 350 kg Tool holder SK 40 Number of tool positions 30 pos. Internal coolant supply 20 bar Rapid traverse (X / Y / Z) 30 m/min Dimensions L x W x H 5.0 x 2.5 x 3.3 m Machine weight approx. 11 t Universal CNC machining center with 5 axes and fixed table in pendulum operation, overhauled for €60,000. - NC rotary tilting table in the right working area - Fixed table in the left working area - 4th axis on fixed table, 165 mm center height - Internal coolant supply - Double cartridge filter - Chip conveyor - Partition wall for pendulum operation - External handwheel - KinematicsOpts - 3D probe IR - Oil mist extraction unit - Motorized "rolling roof" above the machine - Full overhaul in 2022/2023 for €60,000 (all guideways and ball screws replaced) - Pendulum mode Djdpfx Aexbh D Doggewd - Initial commissioning 2006 - Replacement spindle installed in 2016 at approx. 21,000 spindle hours.