Industrijski roboti

FANUC R-2000iB/250F (4) R-30iB Steuerschrank

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Fpedpoia Rtdefx Afljb Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Leto izdelave: 1994, Stanje: dober (rabljeno), Rivo bandsaw sharpening machine Model GA 250 Fsdpfspl D Hxsx Aflopb

Leto izdelave: 2026, Stanje: novo, številka stroja/vozila: 1234, Semi-manual filling machine for soft packaging The semi-manual filling machine BIB‘UP® is ideal for small and medium-sized productions of soft packaging types: BIB from 2 to 20 liters and pouch from 1.5 to 3 liters. Also available without machine frame and without pump. Features: Three stages are distinguished: removal of the fitting, cycle start (vacuuming the bag, counting and filling, injection, probing, nitrogen flushing at the end of the cycle), insertion of the fitting High work rate and performance Reliable, mobile, and very easy-to-operate filling machine BIB Performance: 3L bag: 280/290 cycles/h 5L bag: 250/260 cycles/h 10L bag: 200/210 cycles/h 15L bag: 160/175 cycles/h 20L bag: 140/150 cycles/h Pouch Performance: 1.5L: 270/270 cycles/h 3L: 245/250 cycles/h Technical Data: Liquid throughput: 82 hectoliters/hour up to 0m (standard version), 125 hectoliters/hour up to 0m (option) Min./max. air pressure: 5 bar / 8 bar Supply of dry air: 7 to 10 bar Nitrogen supply: 1 to 4 bar Nitrogen pressure regulation: 0.2 to 0.4 bar Air flow rate: 7 m3/hour Power supply: 400V 3P+E, 50 Hz (standard version) Pulse counter: 75.3 points per liter (standard version) Connection: Diameter 40 MACON Fedjiu Hxkepfx Afljpb Noise level: < 86 dB Space requirements: Depth: 1110 mm Height: Maximum 1770 mm Width: 745 mm Weight: 155 kg

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Fjdpfx Afjizth Holopb Maximum arm reach: 2655 mm Controller: Fanuc R-J3IC Payload capacity: 210 kg 5 robots available, each equipped with a different end-of-arm tool.

Leto izdelave: 1990, Stanje: dober (rabljeno), Used side loader Kalmar, The machine has been well maintained. Fsdpjh Et E Nefx Aflepb For further details, please refer to the pictures.

Stanje: novo, Leto izdelave: 2025, Universal Lathe CORMAK 310 x 900 (TU3109V), VARIO version with stepless spindle speed control. Machining parameters 310 x 900 mm, modern DC motor 1.5kW/230V, equipped with cooling system and digital readout. Recommended for machining hard steels, internal and external surface turning, taper turning, polishing, threading (metric and imperial), drilling, and broaching. Semi-professional model, designed for single-piece and small batch production. Machine version with base. The CORMAK 310 x 900 (TU3109V) 230V universal lathe, thanks to stepless spindle speed adjustment, is an ergonomic machine that meets user requirements. Reduced setup time when working on a wide range of part sizes translates into increased productivity and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via direct current motor and voltage regulator, providing the highest spindle rotational accuracy and improved machining quality of finished parts. Modern DC motor with stepless spindle speed regulation ensures user convenience and shorter setup times. Smooth, efficient drive with excellent speed and torque control characteristics. LCD screen with spindle speed display allows easy monitoring and quick adjustment of spindle speed while setting cutting and threading modes. Two spindle speed ranges: low (80–1000 rpm) for machining hard steels, high (160–2000 rpm) for precision high-speed turning. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel on the gearbox. Fpodpfx Ajric Idefleb Bed with induction-hardened, ground guideways. The suitable bed width of 180 mm ensures stable and precise operation. Wide threading range (right- and left-hand threading): metric – (18) 0.2–3.5 mm, imperial – (18) 8–48 TPI. Automatic longitudinal feed 0.085–1.832 (9) mm/rev and cross feed 0.010–0.100 (9) mm/rev – reduces machining time and improves quality when turning long workpieces. Spindle bore 38 mm provides optimal working results, allowing the machining of large-diameter shafts. Compound slide with graduation, swivel ±45°, and tailstock with ±10 mm offset for taper turning. Hardened and ground gears in the spindle gearbox. Leadscrew and feed rod for threading and automatic longitudinal and cross feed. Cooling system and 2-axis digital readout included as standard. Machine is fully compliant with EU directives (CE) as well as Polish and DIN regulations and standards.

Stanje: dober (rabljeno), Consisting of: “Ishida” Multihead Weigher Model: CCW-M-216W-D/30-SS Heads: 16 units Output: up to 2 x 40 weighings/min Filling weight (max.): 1,500 g Accuracy: Mean value 0 to +1.0 g Weighing range: 14–1000 g Maximum volume: 4,500 cc (per single weighing) Minimum graduation: 0.2 g Display: Touch-screen display Power supply: 230V, 50Hz Connected load: 1.7 kVA + Vertical Form Fill Seal Machine (Flowpack) “Rovema” Model VPK260 - 14110 Year: 2001 Mechanical output (cycles/min): 180 Film width / diameter (max.) (mm): 450 / 550 (600 / 550 with pre-unwinder) Bag width (min.–max.) (mm): 60–260 Bag length (min.–max.) (mm): 120–600 Filling volume (max.) (cm³): 6,000 Sealing pressure (max.) (N): 5,000 (optional: 8,000) Program memory: Standard: 100 (optional: 1,000) Dimensions (L x W x H) (mm): 2,200 x 1,430 x 1,620 mm Weight: 920 kg Power connection (Volt): 230 / 400 Power consumption (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption at 6 bar (Nl/cycle): 0.25 Machine color: RAL 9007L / grey-aluminum Operating temperature (min.–max.) (°C): +5 … +45 Storage temperature (min.–max.) (°C): -30 … +60 Humidity (max.) (%): 15–95; no condensation In good condition Function tested + Vertical Form Fill Seal Machine (Flowpack) “Rovema” Model VPK260 - 14111 Year: 2001 Mechanical output (cycles/min): 180 Film width / diameter (max.) (mm): 450 / 550 (600 / 550 with pre-unwinder) Bag width (min.–max.) (mm): 60–260 Bag length (min.–max.) (mm): 120–600 Filling volume (max.) (cm³): 6,000 Sealing pressure (max.) (N): 5,000 (optional: 8,000) Program memory: Standard: 100 (optional: 1,000) Dimensions (L x W x H) (mm): 2,200 x 1,430 x 1,620 mm Fodpfeukd Drox Aflspb Weight: 920 kg Power connection (Volt): 230 / 400 Power consumption (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption at 6 bar (Nl/cycle): 0.25 Machine color: RAL 9007L / grey-aluminum Operating temperature (min.–max.) (°C): +5 … +45 Storage temperature (min.–max.) (°C): -30 … +60 Humidity (max.) (%): 15–95; no condensation In good condition Function tested + Carton Erector – Packaging Machine “Paal” Model ELLE 3000 S Operating speed: Max. 14 cycles / minute Infeed rate: Max. 70 bags / minute Format1: Tray with cover Product description: Standing pouch 1.5 kg Product dimensions: Approx. 180 x 70 x 300 mm Product weight: 1.5 kg Grouping pattern: 1 x 5 standing Packaging type: Tray with internal, self-glued cover and cover securing Dimensions: Infeed height product: 650 mm Outfeed height package: 500 mm Footprint: approx. 8000 x 6500 mm Main dimensions according to the layout plan (see attached photo) 3 x 400V, 50Hz, 6kW Packaging machine: Model: Elematic 3000 LS/335 In good condition

Stanje: rabljeno, Leto izdelave: 2002, Tehnični podatki: Premer struženja: 475 mm Dolžina struženja: 1500 mm Krmiljenje: HEIDENHAIN MANUAL PLUS 4110 Premer struženja nad podporo: 260 mm Fpjdjxhqqmepfx Afleb Število obratov: 3000 1/min Revolverska glava: 12 pozicij Vreteninska izvrtina: 78 mm Pomik pinole: 120 mm Teža stroja cca: 3,1 t Prostorske zahteve cca: 3,2 x 2 x 1,9 m Ciklični stružni stroj, 12-pozicijska revolverska glava SAUTER, velikost VDI 30, Zelo veliko dodatne opreme (glej slike) Mehanski števec ur delovanja: cca 4700 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, CNC krmilnik: HEIDENHAIN TNC 640 Osi Pomik osi X mm: 2.200 Pomik osi Y mm: 2.200 Pomik osi Z mm: 1.610 Osa A stopinj: +185° Delovna miza Število palet: 4 Dimenzije mize mm: ø1.800x1.400 Maksimalna dimenzija obdelovanca (D x V) mm: ø2.850x2000 Maks. teža obdelovanca kg: 4.000 Vreteno Hitrost vretena rpm: 15.000 Moč vretena kW: 63/73 (100/40%ED) Vrtljivi moment vretena Nm: 300/348 (100/40%ED) Hlajenje Hlajenje skozi sredino vretena bar: 80 (Form A) Kapaciteta rezervoarja: 2.500 Fpodew Rmpljpfx Afleb Orodni sistem Držalo za orodje: HSK-100A Število mest v orodnem magazinu: 304

Stanje: novo, Leto izdelave: 2025, moč: 45 kW (61,18 KM), Stroj je sposoben obdelovati različne vrste odpadnih palet s kapaciteto do 90 palet na uro. Odlikuje ga edinstvena zasnova, ki združuje tako območje za predhodno rezanje kot območje za končno rezanje, kar omogoča zmanjšanje materiala na velikost delcev do 10 mm. Ta hibridna tehnologija omogoča učinkovito obdelavo velikih količin odpadnih palet. Poleg tega je stroj opremljen z: - magnetnim ločevalnikom za odstranjevanje kovinskih delcev - trakom za gladko upravljanje in transport končnega materiala. Fpsdpstpwrmsfx Afljb