Robni Lepilni Stroj Strom - Strongedge nakup rabljenega (27.407)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 15 mm, skupna masa: 4.000 kg, OTT robna lepilka TIP Strom+ opcijsko z vračalnikom TransCompakt ali TransLift. Stroj je tovarniško obnovljen in se prodaja z garancijo v Nemčiji. Orodja nova, verižni segmenti in jermeni novi. Za PUR in EVA lepila. Alternativno imamo na voljo tudi Tornado+ in StrongEdge, prav tako tovarniško obnovljena. Gedsyn Am Iepfx Afweub

Stanje: rabljeno, številka stroja/vozila: 006561, Tip nalepljenega roba: tanek rob, debel rob, masivni les, furnir Sistem lepljenja: EVA Stroj za lepljenje robov: Stroj 1 in 2 Gjdpfx Aoyzplfefwoub Največja širina plošče: 2800 mm Največja podajalna hitrost: 40 m/min Delovni agregati, desna stran: 11 kosov Delovni agregati, leva stran: 11 kosov

Stanje: rabljeno, številka stroja/vozila: 008430, Pozicija 1: Nakladalec MAHROS + STEFANI-RUNNER + EVOLUTION Guodpfsyqxx Ssx Afwjb Pozicija 2: Dvostranski robni lepilni stroj MAHROS + STEFANI-RUNNER + EVOLUTION Pozicija 3: Razkladalec MAHROS + STEFANI-RUNNER + EVOLUTION

Stanje: rabljeno, številka stroja/vozila: 007685, Type of applied edge: thin edge, thick edge, solid wood Glue system: PUR Multipurpose unit: yes Edgebanding machine: Machine 1 & 2 Max. panel width: 3200 mm Godpfx Ajy Nkqfefwsub Working units, right side: 15 pcs Working units, left side: 15 pcs

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Dobro stanje, glej sliko. Za stroj za lepljenje robov Homag serije KL. Godpfx Aoy N Ulajfwjub

Stanje: rabljeno, številka stroja/vozila: 008288, Pozicija 1: Nakladalnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 2: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 3: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 4: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 5: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 6: Sredinska žaga SCM-MAHROS - STEFANI - CELASCHI Gujdpfx Afox Nv S Ujwjb Pozicija 7: Razkladalnik SCM-MAHROS - STEFANI - CELASCHI

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, dvostranski, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Gujdoxwui Eopfx Afwsb Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Stanje: zelo dobro (rabljeno), Katalogna številka 7963 TEHNIČNI PODATKI Oprema: - krožnik - grelna letev - giljotina - posoda za lepilo (granulat) - podajalnik traku - giljotina - 3 pritisni valjčki - rezalna enota z žagami za končno obrezovanje - 2 rezkalni enoti za oblikovanje robov (radialni rezkarji) - strgala za odstranjevanje odvečnega lepila - 2 polirki - debelina obdelovanca 10-60 mm - debelina robnega traku 0,4-5 mm - izvlečna podporna roka iz delovne mize - podajalna hitrost 9 m/min - skupna moč 5,5 kW - premer izsesovalnega priključka 120 mm - dimenzije (D/Š/V) 3100/1080/1470 mm - teža 670 kg PREDNOSTI – tehnična dokumentacija DTR – ni ponovno barvana – avstrijska proizvodnja – leto izdelave 2010 – idealno stanje – rabljeni robni lepilni stroj Gusdpfoyzy D Sox Afwsb Neto cena: 17.900 PLN Neto cena: 4.260 EUR Neto cena preračunana po tečaju 4,2 PLN/EUR (v primeru večjih sprememb tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Gjdjyxl Siopfx Afwoub Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Godpfoyq Avhjx Afwjub Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: rabljeno, številka stroja/vozila: 008412, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA Multifunkcijska enota: da Stroj za lepljenje robov: Stroj 1 in 2 Največja podajalna hitrost: 40 m/min Gedpfoyilxmjx Afwoub Delovne enote, desna stran: 11 kosov Delovne enote, leva stran: 11 kosov

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) Guedeywk Elepfx Afwsb - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) Godpfx Afeyttrxjwsub TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna višina: 1.445 mm, največja dolžina izdelka: 2.740 mm, Cette CASADEI Bordatrice E350PM a été fabriquée en 2022. Elle dispose d’une plage de hauteur de panneaux de 10 à 45 mm et prend en charge des chants d’une épaisseur de 0,4 à 2 mm. La machine fonctionne à une vitesse d’avance de 7 m/min et offre une puissance de chauffe du bac à colle de 1 490 W. Profitez de cette opportunité pour acquérir la plaqueuse de chants CASADEI Bordatrice E350PM. Contactez-nous pour plus d’informations. • Hauteur de panneau : 10-45 mm Guedpfxjx D Icfj Afwjb • Vitesse de bande d’avance : 7 m/min • Épaisseur du chant : 0,4-2 mm • Largeur minimale du panneau : 210 mm • Longueur minimale du panneau : 600 mm • Distance minimale entre panneaux : 95 mm • Ouverture de support de panneau extensible : 310 mm • Pression de service pneumatique : 0,65 MPa (6,5 bar) • Consommation d’air moyenne : 320 Nl/cycle • Puissance de chauffe du bac à colle : 1 490 W • Dimensions globales de la machine (mode opératoire) : 2 740 x 1 445 x 945 mm (L x H x P) • Vitesse de l’air d’aspiration : 30 m/s • Débit d’air d’aspiration : 950 m³/h

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Godpfx Afeyk Tkvowoub Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: rabljeno, številka stroja/vozila: 007809, Vrsta nameščene obrobe: tanka obroba, močna obroba, masiven les Sistem lepljenja: EVA, PUR Stroj za lepljenje robov: stroj 1 Največja širina plošče: 1200 mm Največja podajalna hitrost: 40 m/min Delovni agregati, desna stran: 8 kos Delovni agregati, leva stran: 8 kos Gsdpsyhbn Djfx Afwsub

Stanje: dober (rabljeno), Lepljivi agregat, lepilni del, lepilna glava, grelni bazen za robne lepilke, robna lepilka, enota za topljenje z rezervoarjem za granulat -S predtalilno napravo imate vedno na voljo dovolj talilnega lepila -Proizvajalec: HOMAG Godpfx Afjd Duvfswoub -Tip: 2-006-51-2870 -Električno ogrevano -Dimenzije: 400/70/H225 mm -Teža: 10,6 kg

Stanje: dober (rabljeno), Glue application unit, gluing unit, gluing head, heated glue pot for edge bander, edge banding machine Guedpfxjb A S N Re Afweb - Electrically heated - 7 heating rods each with 800 WATT - Refurbished by FavFE-MA-TECH - 2x glue pots available - Price: per unit - Dimensions: 190/100/H125 mm - Weight: 3 kg/unit

Stanje: dober (rabljeno), Lepljiva enota, lepilni del, lepilna glava, grelni bazen za robno lepilko, stroj za lepljenje robov, talilna enota z rezervoarjem za granulirano lepilo -Z predtalilno enoto imate vedno na voljo dovolj talilnega lepila -Proizvajalec: ENA Gedpfx Afed Duvcewjub -Tip: električno ogrevano -Dimenzije: 410/140/V220 mm -Teža: 8,2 kg

Stanje: dober (rabljeno), Lepljenje agregat, lepilni del, lepilna glava, grelni bazen za lepilni robni stroj, stroj za lepljenje robov, enota za taljenje z rezervoarjem za granulat -S predtaljevalno enoto vam je vedno na voljo dovolj talilnega lepila -Proizvajalec: ENA -Tip: 4, električno ogrevanje -Dimenzije: 460/160/V340 mm -Teža: 19,5 kg Gsdpfod Duvdjx Afwjub

Stanje: rabljeno, Leto izdelave: 2010, skupna višina: 2.580 mm, skupna dolžina: 5.500 mm, skupna širina: 1.500 mm, Weight: 1,500 kg Price: On request - Year of manufacture: 2010 - Documentation available: No - CE marking: Yes - CE certificate: No Gujdpfxeyu Tkko Afwob - Serial number: 161/1-10 - Number of units [pcs.]: 7 - 1st unit type: Prefeeder unit - Tools available: Yes - 2nd unit type: Gluing unit - 3rd unit type: Pressure roller - Tools available: Yes - 4th unit type: Crosscut unit - Tools available: Yes - 5th unit type: Rough milling unit - Tools available: Yes - 6th unit type: Corner rounding unit - Tools available: Yes - 7th unit type: Flat scraping unit - Tools available: Yes - Voltage [V]: 400 - Power consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5,500mm x 1,500mm x 2,580mm (L x W x H) - Transport weight [kg]: 1,500kg - Number of transport packages [pcs.]: 1 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT reclaimable for businesses Delivery and trade-in possible at any time for any equipment from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2017, skupna višina: 2.100 mm, skupna dolžina: 6.700 mm, skupna širina: 1.050 mm, Weight: 3,500 kg Price: On request - Special features: - Description: Includes a Nordson unit from 2017 - Year of manufacture: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - 1st unit type: - Type/Brand: Nordson - Tools included: Yes - 3rd unit type: - Tools included: Yes - Voltage [V]: 400 Gsdpfsyrpvwjx Afwjub - Power consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (L x W x H) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial Information VAT: The stated price is net, plus VAT VAT/Margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Gujdpec S Di Rjfx Afwob Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Guedsfbr S Ropfx Afweb Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: Guedpfx Afsc Tmygeweb • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)