Rapid Dgl 5000/500 nakup rabljenega (21.311)

Stanje: rabljeno, Leto izdelave: 1990, Premer reza 500 mm Dolžina reza 5000 mm Premer žaginega lista 420 - 500 mm Dimenzije cca. 6400 x 1500 x 1600 mm Teža cca. 1600 kg Brezstopenjsko podajanje Na voljo navodila za uporabo in seznam rezervnih delov Bjdpfx Aqsv U Dluotsdg Pnevmatsko podajanje, brezstopenjsko nastavljivo Vzdolžni pomik motoriziran z digitalnim prikazom

Stanje: rabljeno, Dvoglava kotna žaga RAPID tip DGL 5000 / 500 Potreben popravila – krmilje ne deluje Leto izdelave: 1993 Dolžina reza: 5000 mm Najkrajša dolžina obdelovanca: 350 mm Premer žaginega lista: 500 mm Bodpfx Aoyxy S Deqtedg - Krmilje ne deluje Dimenzije (D x Š x V): 7200 x 1700 x 1850 mm Teža: 1250 kg Sprostimo prostor Ugodni stroj – idealno za izvoz

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 7375, Cutting length: 5000 mm Saw blade diameter: depending on requirements, 420 - 500 mm Space requirement: 6400 x 1400 x 1700 mm Bdodpfxoz E Sns Aqteg Weight: approx. 1600 kg

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: Bdodpfxjwbknbe Aqtog This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, skupna višina: 1.900 mm, skupna masa: 1.260 kg, Ta žaga RAPID DGL 200-E je bila izdelana leta 2017. Ima ročni nagibni kot od 45° do 90°, žagin list premera 500 mm in pnevmatični sistem za podajanje žage. Opremljena je z vodoravnimi in navpičnimi pritrdilnimi cilindri, kar povečuje njeno vsestranskost. Dimenzije žage, ki je dolga 3700 mm, so 5250 x 1420 x 1900 mm, teža pa znaša 1260 kg. Robustna izbira za različne zahteve pri rezanju. Za več informacij o tej žagi nas kontaktirajte. Dodatna oprema: • Pnevmatični sistem za podajanje žage • Pritrdilna naprava: 2 vodoravna pritrdilna cilindra, 2 navpična pritrdilna cilindra Prednosti stroja: Kakovostne prednosti stroja: • Stroj je deloval približno 3 leta v dvosmenskem obratovanju in v zadnjih letih v enosmenskem obratovanju. Tehnične prednosti stroja: • Največji premer lista: 500 mm • Nagibni kot: ročno 45° do 90° • Dolžina reza: 3700 mm Dodatne informacije: Pogon: 2 x motorji 2,2 kW Bdodszvu Npepfx Aqteg Nastavitev enote: upravljana z motorjem Podajanje žage: pnevmatično Nagibni kot: 45-90°, nastavljiv ročno Pritrdilna naprava: dva vodoravna pritrdilna cilindra Nadzorovalni sistem: pripravljen za namestitev nadzorovalnega sistema Rapid Fiksna sredinska opora za podpiranje profilov Žagin list D=500 2 x kroglični vijačni pogon za nastavitev agregata Najmanjša velikost reza: približno 310 mm Oprema: DGL-200/R600 ELEKTRONIKA s sistemom ATV 32 DGL200SE VERT. KLEŠČE št. M. ZA DGL-200E DGL200TK KRATKA Povezava DGL-200RB Gibljiva valjčna tirnica, širina 215 mm DGL-200E Povezava 2,2 KW, priprava za FRANCOSKE priključke za odsesavanje Vtični priključek za odsesavanje do maks. 2,2 kW, pripravljen v tovarni DGL200VP - PAKET DESK FIKSNA NADZORNA PLOŠČA DG1.200 Dimenzije: Globina stroja: 5250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, - Orodja Ø 500 mm - Hitrost vrtenja lista 2800 obr/min Bodox N R H Tjpfx Aqtsdg - Teža cca 1500 kg

Stanje: rabljeno, Technical details: Saw blade diameter: 420 mm Maximum cutting length: 5000 mm Cutting range (H x W): 180 x 100 mm Required air pressure: 6 bar Mitre cuts on both sides: 45° - 90° (manual) Operating voltage: 380 / 220 V Total power requirement: approx. 8.0 kW Machine weight: on request Bodsu Nigwjpfx Aqtodg Machine dimensions (L x W x H): approx. 6.4 x 1.3 x 2.0 m Circular saw with 2x sawing supports for cutting profiles with mitre cuts up to 45°. Microprocessor positioning control BECKHOFF E 70-300 with absolute encoder Digital display Travel distance per sawing support = 2350 mm, motorized Clamping cylinder for each horizontal and vertical axis, manual Spray device Hydropneumatic feed Use of carbide tipped saw blades

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Description: RAPID DGL 200 M Double Mitre Saw Working length: 5,100 mm Bedpfxotdgitj Aqtodg Working height: 160 mm Tiltable: yes Aluminium spray unit: available Short length stop: available Socket for external extraction: available Vertical clamping device: available Moving roller conveyor (feeding from the right) Rapid DGL 200 M Double Mitre Saw ----- With 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°. Easy Operation and Premium Quality ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System Features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Full coverage of guide bushings around the guide shafts of the saw heads - Hardened guide shafts - Swivel axis supported on both sides Digital Length Display: ----- Ensures perfect dimensional and angular accuracy. ----- To achieve this, we use precise and efficient motion technology: Ball bushing guides for length adjustment, spring-mounted pivoting units for convenient and safe angle adjustment between 45° and 90°. Length and angle adjustment of this double-head mitre saw are carried out manually. Greater operating comfort and enhanced performance can be achieved with the digital length display and pneumatic swivel mechanism. The 500 mm saw blades enable processing of a wide range of profile systems. Technical Specifications ----- Drive: 2 x 2.2 kW three-phase motors, 400 V Swivel range: manual, 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 5,100 mm Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Compressed air: 7 bar Dimensions: 5,250 x 1,420 x 1,900 mm Weight: 1,260 kg

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Swivelling: yes Control: yes Bdodpfxjxmk Age Aqtjg Rapid DGL 200 E Double Mitre Saw ----- with 500 mm saw blade diameter, electronic length and angle adjustment (45° and 90°, intermediate angles manually adjustable via scale) Precision cutting of profiles ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System features: ----- - Automatic length adjustment - Manual or electro-pneumatic angle adjustment 45°–90° - Saw blade Ø 500 mm - Extremely rigid machine bed - Complete enclosure of guide bushings around the guide shafts of the saw head - Hardened guide shafts - Swivel axis supported on both sides Application examples: ----- Window, door, façade, conservatory, insect protection profiles; Partition wall systems; interior sliding door elements - PVC, PVC-Alu - Aluminium - Wood, wood-Alu Perfect dimensional and angular accuracy guaranteed. ----- With the double mitre saw DGL200E, we offer you a reliable quality product from our range of precision double mitre saws, so that you can supply your customers with flawless high-quality construction elements. Cutting lengths can be uploaded to the control system of this double-head mitre saw via network or USB connection, or entered manually via the keyboard. Special software solutions enable automatic positioning for cross cuts, overlengths or short dimensions, allowing processing of lengths outside the machine’s cutting range. An optimisation program with offcut management helps to minimise waste, thus reducing costs and ensuring sustainable use of valuable materials such as aluminium, plastic, or wood. A thermal label printer with dispenser, ergonomically positioned directly beneath the control terminal, enables efficient labelling of finished parts. Good and controlled offcut removal of the base machine can optionally be supplemented with a conveyor belt system. Technical Data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° (up to 135° optional) Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders; 2 vertical clamping cylinders (optional) Length adjustment: electronic Air pressure: 7 bar Dimensions: 5250/1420/1900 mm Weight: 1,260 kg Control ----- PCE 6000 Positioning and length cutting control PCE 6000 based on Windows 10 IOT for modern window manufacturing on RAPID double mitre saws. 128 GB SSD, 8 GB RAM, approx. 10 GB database for cutting programs and profile data. Standard equipment: - Single cut - Program cut - 2x USB interface - TFT screen - Graphical representation of profile cross-sections - Backlit display - Control display integrated in the two-hand control console Optional features at extra cost: - Offcut optimisation - Software stop for overlengths - Software stop for short parts - Cross-cutting function - Profile height measurement device - Label printer (standard label...

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Tiltable: yes Rapid DGL 200 M Double Miter Saw ----- with 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°, intermediate angles can be set manually using the scale. Easy operation and highest quality ----- For precise and burr-free cutting of aluminum, plastic, and wood profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Complete encasement of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and corresponding corrections - Edit the 30 profile numbers (name + correction) directly in the display - The correction is factored in based on the saw’s angle position (45° and 90°) - Piece counter: if the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: converts length and profile height based on the angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-Alu - Aluminum - Wood, wood-aluminium Perfect precision in dimension and angles guaranteed. ----- We use precise and efficient movement technology for this: Linear ball bearings for length adjustment, spring-loaded pivot units for easy and safe angle adjustment between 45° and 90°. Both length and angle adjustments on this double-head miter saw are manual. Greater convenience and higher performance can be achieved with the digital length display and pneumatic tilting unit. With 500 mm saw blades, a wide range of profile systems can be processed. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5,250/1,420/1,900 mm Weight: 1,260 kg Options ----- - Hydropneumatic feed - Spray system - Stop for short parts - Rubber-coated vertical clamps - Vertical clamps with support plate for profile-dependent parts - Gasket clamping device - Digital length display - External fixed and centrally movable profile supports - Roller supports at the movable or fixed saw unit Bedexmk Aaspfx Aqtedg - Chip extraction system (Technical data as per manufacturer – subject to change/errors excepted!)

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: M 91317, Decoiler Coil Weight / Load Capacity: 5 t Strip Width: 80 - 500 mm Bedpfx Aouqd Udeqtsdg Coil Outside Diameter: 1800 mm Expansion Range: 508 mm Speed: 50 m/min Straightening Unit Strip Throughput Width: 50 - 500 mm Number of Straightening Rolls: 9 pcs. Diameter of Straightening Rolls: 65 mm Number of Feed Rolls: 2 pcs. Diameter of Feed Rolls: 150 mm Strip Thickness: 1 - 8 mm Feed Rate: 50 m/min Feed Length: 0.1 - 9999.9 mm Standard Equipment Coil Loading Station Useful Stroke: 500 mm Load Capacity: 5,000 kg Max. Strip Width: 500 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 500 kg, Varilna vrtljiva miza, L manipulator, pozicioner, odlično stanje, z dodatnim vpenjalnim diskom vključenim. Funkcije: vrtenje, nagibanje (obrnjeno na glavo), brezstopenjsko nastavljiva hitrost. Mehanska nastavitev višine: 800 mm - 1100 mm. Iztek: 1000 mm. Gradbena višina: 1800 mm. Dolžina: 3000 mm. Širina: 1100 mm. Premer vpenjalnega diska: 1000 mm. Bdodpfx Aqjylkn Ijtjg

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Bdjdpfx Aqozvnf Djtog Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Mobile coil cart FORSTNER AG 5000 b2mf 1500 Maximum coil width: 1500 mm Load capacity: 5000 kg Inner diameter: 360 - 630 mm Outer diameter: 1100 mm Bdjdpfxjmv Hv Ao Aqtog Equipped with 4-arm spindle Double-supported decoiler with hand brake and steel wheels for mobility

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, vključno z napravami Sheetmaster, Toolmaster in Gripmaster Delovni čas: 11.800 ur Bdsdpfszp Dwpjx Aqtjg Lokacija na zahtevo Slike na zahtevo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V tej ponudbi pridobite rabljeno koordinatno merilno napravo »Keyence XM-5000«. Predmet prodaje: 1x Keyence XM-5000 s naslednjo opremo: Bdodoy Iaayspfx Aqtjg vključno z prenosnim računalnikom in programsko opremo za uporabo vključno s transportnim kovčkom vključno s polnilno postajo za baterijo vključno s stojalom Stanje: Ta ponudba se nanaša na rabljeno napravo, ki lahko ima znake uporabe (manjše praske ali porumenelost). Naprava je bila testirana in je delujoča. Pakiranje in pošiljanje: Napravo si lahko ogledate v času naših delovnih ur. Prosimo, dogovorite se za termin! Po dogovoru je možno tudi pakiranje za transport po morju in pošiljanje po vsem svetu. Pred pošiljanjem ali prevzemom bomo za vas posneli video posnetek funkcionalnega testa. Za dodatne informacije se lahko seveda tudi osebno obrnete na nas.

Stanje: dober (rabljeno), Inox tank 5000 L with agitator and cooling system. In good condition. Bedpfx Aovr E N Nsqtedg Equipped with an integrated pipe around the tank for cooling purposes.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Bdodpfxjzpvdzs Aqtsg Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Bsdpfsvu Syyex Aqtedg Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: rabljeno, Leto izdelave: 2024, Dolžina reza 3700 mm Pogon: 2x 3,0 kW motor 2 žagini listi premera 600 mm / Z = 138, za NE materiale Podajanje žage: hidropnevmatsko pripravljeno za priklop elektronskega krmiljenja Agregat levo fiksno, desno pomično R700i – podatkovna baza za največ 400 osnovnih profilov, 1000 barvnih profilov – USB in mrežni priključek / daljinski servis – Kot reza 20°-90°-135° – Integriran pomnilnik – TFT barvni zaslon na dotik Nastavitev agregata: brezstopenjsko motorizirano nastavljanje agregata 20° - 135° vključno s prijemalom za odrezke (1x na agregat) Podatek o območju nihanja Nihanje navzven Prijemalo: vertikalno prijemalo s pritrdilno ploščo za vpenjanje profilnih delov Podajanje z desne: valjčna proga premična, nosilna dolžina 2900 mm, širina 250 mm Prisloni: vtičnica za odsesavanje Programskokrajen prislon za dolge kose Prislon za kratke kose, pnevmatsko izvlečen Tiskalnik etiket: RAPID-specifičen tiskalnik etiket RED-300 vgradnja v upravljalno omarico R700 Prijemalo za tesnilo Prosto stoječa elektro omara R700 Transportni trak za odpadke Dolžina reza 3,7 m Dvigalni transporter 1000 mm horizontalno x 2500 mm vertikalno Bsdpfxezhpbds Aqtsdg Lokacija skladišča: stranka

Stanje: dober (rabljeno), Chassis, electric motor, DC motor, traction motor, drive motor Bedpfxei Dyv Ns Aqtsdg - Manufacturer: Rapid, chassis drive motor from electric forklift RVT 2500 - Drive motor: LS Leroy Somer Type T15 24V 2.0 kW - Motor brake: Lenze - Individual components: see photos - Dimensions: 290/285/H700 mm - Weight: 76 kg

Leto izdelave: 1995, stanje: rabljeno, vrsta goriva: električni, Drawbar head, control unit, steering unit Bdedpfx Aqoi Dywfetsg - Manufacturer: Rapid, complete steering control unit from electric pallet truck RVT 2500 - Quantity: 1x drawbar available - Price: per unit - Dimensions: 720/420/H180 mm - Weight: 14 kg/unit

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), Extraction system for chips from aluminium, steel and PVC Dimensions: 800x1000x2370 Bdsdpfx Aod Rx H Esqtjg

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2015, Funkcionalnost: nefunkcionalno, Brez minimalne cene – zagotovljeno prodaja po najvišji ponudbi! Oddaja ponudbe vas zavezuje k pravočasni prevzemu do 18. 09. 2026! Na kraju samem bo na voljo viličar za nakladanje. Stroj je pokvarjen in služi kot vir rezervnih delov. TEHNIČNE PODROBNOSTI Bedpfx Aezx E N Ssqtodg Tehnologija tiskanja: brizgalni tisk Barvni sistem: 7 barv PODROBNOSTI O STROJU Električni priključni podatki Priključek za trifazni tok 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR priključek za trifazni tok 1: 1,5 kA Priključek za trifazni tok 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR priključek za trifazni tok 2: 1,5 kA Enofazni priključek: 220–240 V, 50/60 Hz, 16 A SCCR enofazni priključek: 35 kA OPREMA Skladnost: CE, KCC Odobritev varnosti: TÜV Rheinland – odobrena varnost po tipu

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2015, Funkcionalnost: nefunkcionalno, Brez minimalne cene – zagotovljeno prodaja po najvišji ponudbi! Oddaja ponudbe vas zavezuje k pravočasni prevzemu do 18. 09. 2026! Na kraju samem bo na voljo viličar za nakladanje. Bdjdpfx Aozx E Axjqtjg Stroj je pokvarjen in služi kot vir rezervnih delov. TEHNIČNE PODROBNOSTI Tehnologija tiskanja: brizgalni tisk Barvni sistem: 7 barv PODROBNOSTI O STROJU Električni priključni podatki Priključek za trifazni tok 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR priključek za trifazni tok 1: 1,5 kA Priključek za trifazni tok 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR priključek za trifazni tok 2: 1,5 kA Enofazni priključek: 220–240 V, 50/60 Hz, 16 A SCCR enofazni priključek: 35 kA OPREMA Skladnost: CE, KCC Odobritev varnosti: TÜV Rheinland – odobrena varnost po tipu