Rapid - Wegoma Dgl 5000 / 500 Mit Positioniersteuerung nakup rabljenega (28.660)

Stanje: rabljeno, Dvoglava kotna žaga RAPID tip DGL 5000 / 500 Potreben popravila – krmilje ne deluje Leto izdelave: 1993 Dolžina reza: 5000 mm Najkrajša dolžina obdelovanca: 350 mm Csdpfx Ajyxy S Dsahjhb Premer žaginega lista: 500 mm - Krmilje ne deluje Dimenzije (D x Š x V): 7200 x 1700 x 1850 mm Teža: 1250 kg Sprostimo prostor Ugodni stroj – idealno za izvoz

Stanje: rabljeno, Leto izdelave: 1990, Premer reza 500 mm Dolžina reza 5000 mm Chsdpfov U Dluox Aahsb Premer žaginega lista 420 - 500 mm Dimenzije cca. 6400 x 1500 x 1600 mm Teža cca. 1600 kg Brezstopenjsko podajanje Na voljo navodila za uporabo in seznam rezervnih delov Pnevmatsko podajanje, brezstopenjsko nastavljivo Vzdolžni pomik motoriziran z digitalnim prikazom

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 7375, Cutting length: 5000 mm Saw blade diameter: depending on requirements, 420 - 500 mm Space requirement: 6400 x 1400 x 1700 mm Chodpfez E Snsx Aahsb Weight: approx. 1600 kg

Stanje: zelo dobro (rabljeno), Keyence Model: VR-5200 Type: Measuring Head Light Sources Observation light source: LED ring light (red, blue, green) Measurement light source: White LED Controller: VR-5000 Observation and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40×: Horizontal 7.6 mm Csdpfx Aaozimlpjhohb Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measuring resolution 0.1 µm Height measurement range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 µm With image composition in Z 1.0 µm Measuring accuracy Without image composition in Z ±2.5 µm With image composition in Z ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measuring accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Composition Fully automatic measurement (automatic XY control + automatic Z focus), automatic mapping, automatic area setup Measurable XY range 206 x 104 mm Object stage XY travel range 184 × 88 mm (motorized) Z travel range 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image sensor 4-megapixel CMOS, B/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC as per KEYENCE specifications (Operating system: Windows 11 Pro) Power Supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30°C Relative humidity 20 to 80% RH (non-condensing) Weight approx. 28 kg (Net weight of measuring unit approx. 11 kg) Object Table Extension Observation software VR-5000 Version 3.3.5.75 Image Composition Module VR-H3J Creates a single large image from a series of images captured with the observation software. Color images are displayed. Analysis Extension Module VR-H3CA Expands the functions of the analysis software. Allows measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as pictured) (Subject to change and errors in the technical data, information is provided without guarantee!) If you have any further questions, feel free to contact us by phone.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1987, Prikolica z nakladalnimi rampami za prevoz gradbenih strojev in naprav. Posebna nadgradnja: nagibna na stran. Codpfx Aaezb Nkgehohb

Stanje: rabljeno, obratovalne ure: 7.545 h, prevoženi kilometri: 72.086 km, moč: 115 kW (156,36 KM), prva registracija: 12/2009, skupna masa: 10.500 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x2, največja dovoljena obremenitev: 5.400 kg, lastna masa: 5.100 kg, medosna razdalja: 2.450 mm, zavore: drugo, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: noben, prostornina tovornega prostora: 4 m³, število sedežev: 2, Oprema: ABS, filter saj, kabina, klimatska naprava, računalnik na krovu, * German machine * 1st owner * Original 72,086 km Chodpfxoxixi Ho Aahsb * Only 7,545 operating hours * Condition as seen in photos * Bucher sweeper City Cat 5000 * Adjustable 3-disc brush system * Sweep width up to 3,780 mm * High-pressure cleaner with lance: Stubborn dirt can be easily removed with the high-pressure lance, just as walls and partitions can be cleaned: with low water consumption and high pressure. * The high tipping of the debris container allows emptying into large containers, skips, or directly into refuse trucks, significantly increasing efficiency. * All cab instruments are ergonomically arranged and easy to operate. The adjustable steering column allows comfortable entry and an optimal working position. * Floor-integrated window in the cab provides an unobstructed view of the suction nozzle and debris. * 4 m³ stainless steel debris container * 800 mm wide and laterally adjustable suction nozzle * Large-volume 880-liter fresh water tank, arranged for a low center of gravity * Pre-spray system * Disc brush diameter: 750 mm * Working speed: 0-20 km/h * Four-wheel steering for a very tight turning circle (2,950 mm) * Air conditioning * Floor window * EasyDrive (hydrostatic drive) (SN) * Joystick control * LED work lights * Rotating beacons * 110-liter diesel tank * Reversing camera * Air-suspended comfort seat * Stereo CD * Wheelbase: 2,450 mm * Permissible total weight: 10,500 kg * Unladen weight: 5,100 kg * Payload: 5,400 kg * For sales to businesses and for export (non-EU and EU), German commercial purchase regulations apply. If a new technical inspection (TÜV) is required, we can provide an offer from our partner workshops. Our offer generally is WITHOUT a new technical inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the item to avoid any misapprehension regarding its condition and suitability. Inspections and tests are possible anytime by appointment and are expressly desirable. All details are given without guarantee. We accept no liability for errors or mistakes in the offer. The buyer is obligated to verify the condition and features of the goods/vehicles independently. Subject to changes, prior sale, and errors.

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Description: RAPID DGL 200 M Double Mitre Saw Working length: 5,100 mm Working height: 160 mm Tiltable: yes Aluminium spray unit: available Short length stop: available Socket for external extraction: available Vertical clamping device: available Moving roller conveyor (feeding from the right) Rapid DGL 200 M Double Mitre Saw ----- With 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°. Easy Operation and Premium Quality ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System Features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Full coverage of guide bushings around the guide shafts of the saw heads - Hardened guide shafts - Swivel axis supported on both sides Digital Length Display: ----- Ensures perfect dimensional and angular accuracy. ----- To achieve this, we use precise and efficient motion technology: Ball bushing guides for length adjustment, spring-mounted pivoting units for convenient and safe angle adjustment between 45° and 90°. Length and angle adjustment of this double-head mitre saw are carried out manually. Greater operating comfort and enhanced performance can be achieved with the digital length display and pneumatic swivel mechanism. The 500 mm saw blades enable processing of a wide range of profile systems. Technical Specifications ----- Drive: 2 x 2.2 kW three-phase motors, 400 V Swivel range: manual, 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 5,100 mm Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Chsdpfetdgitex Aahjb Compressed air: 7 bar Dimensions: 5,250 x 1,420 x 1,900 mm Weight: 1,260 kg

Stanje: dober (rabljeno), 1x Arburg 320C 500-170 z Multiliftom, zaščitno ograjo in odlagalnim trakom. Prodaja brez Z-transportnega traku, temperirnih naprav in Koch sesalca. Stroj je po dogovoru hitro na voljo. Cedszx D Efspfx Aahjhb

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- Chedpfx Aswbknbeahsb AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 8 kg Total Power Requirement: 0.9 kW Edge Banding Machine PM5000 With the portable edge banding machine PM5000 from WEGOMA-VIRUTEX, any workpiece can be effortlessly and easily edge-banded. Suitable for PVC, ABS, melamine, laminate or veneer tapes, which are pre-cut to the required length. Processing of straight, rounded or shaped panels is possible. Thanks to its easy operation and rapid setup, the machine is highly practical for the production of small batches. Equipped with assisted edge feeding and electronic speed control. Electronic temperature control and precise adhesive dosing. The adhesive container and edge guide are Teflon® coated for easy cleaning and maintenance. Cjdpev A E Iyjfx Aahshb - Microprocessor-controlled temperature setting: 120° - 200°C - Speed adjustment directly on the handle - Adjustment possible during edge banding (ECO) - Sleep mode after 1 hour of inactivity - Teflon-coated glue pot - Special glue roller (polymer-coated) for processing 3D edges - Minimum edge thickness: 0.4 mm - Maximum edge thickness: 3 mm - Maximum edge height: 65 mm - Feed speed: 2, 4, 5, 6 m/min - Temperature range: 120° - 200°C - Glue pot capacity: 230 cm³ - Heating time: approx. 8 min - Voltage: 230 V, 50/60 Hz - Power: 830 W

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, skupna višina: 1.900 mm, skupna masa: 1.260 kg, Ta žaga RAPID DGL 200-E je bila izdelana leta 2017. Ima ročni nagibni kot od 45° do 90°, žagin list premera 500 mm in pnevmatični sistem za podajanje žage. Opremljena je z vodoravnimi in navpičnimi pritrdilnimi cilindri, kar povečuje njeno vsestranskost. Dimenzije žage, ki je dolga 3700 mm, so 5250 x 1420 x 1900 mm, teža pa znaša 1260 kg. Robustna izbira za različne zahteve pri rezanju. Za več informacij o tej žagi nas kontaktirajte. Dodatna oprema: • Pnevmatični sistem za podajanje žage • Pritrdilna naprava: 2 vodoravna pritrdilna cilindra, 2 navpična pritrdilna cilindra Prednosti stroja: Kakovostne prednosti stroja: • Stroj je deloval približno 3 leta v dvosmenskem obratovanju in v zadnjih letih v enosmenskem obratovanju. Tehnične prednosti stroja: • Največji premer lista: 500 mm • Nagibni kot: ročno 45° do 90° • Dolžina reza: 3700 mm Dodatne informacije: Pogon: 2 x motorji 2,2 kW Nastavitev enote: upravljana z motorjem Podajanje žage: pnevmatično Nagibni kot: 45-90°, nastavljiv ročno Pritrdilna naprava: dva vodoravna pritrdilna cilindra Nadzorovalni sistem: pripravljen za namestitev nadzorovalnega sistema Rapid Fiksna sredinska opora za podpiranje profilov Žagin list D=500 2 x kroglični vijačni pogon za nastavitev agregata Najmanjša velikost reza: približno 310 mm Oprema: DGL-200/R600 ELEKTRONIKA s sistemom ATV 32 Chsdszvu Npopfx Aaheb DGL200SE VERT. KLEŠČE št. M. ZA DGL-200E DGL200TK KRATKA Povezava DGL-200RB Gibljiva valjčna tirnica, širina 215 mm DGL-200E Povezava 2,2 KW, priprava za FRANCOSKE priključke za odsesavanje Vtični priključek za odsesavanje do maks. 2,2 kW, pripravljen v tovarni DGL200VP - PAKET DESK FIKSNA NADZORNA PLOŠČA DG1.200 Dimenzije: Globina stroja: 5250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, - Orodja Ø 500 mm Chedpox N R H Tsfx Aahsb - Hitrost vrtenja lista 2800 obr/min - Teža cca 1500 kg

Leto izdelave: 2025, stanje: novo, številka stroja/vozila: H3000-H5000TM, Univerzalni preskusni stroj H3000TM-H5000TM v skladu s standardom DIN EN ISO 7500 Univerzalni preskusni stroj serije H3000TM-H5000TM je enovretenski stroj z robustno konstrukcijo iz aluminija in jekla V2a, opremljen z Chsdpfx Asiq Hxkoahjb krogličnimi vijaki, krogličnimi vodili in zobatim jermenom. Zaščitni pokrov iz valovite pločevine ščiti vreteno in vodila. Preskusni stroj je upravljan z mikroprocesorjem in ima membransko tipkovnico. Na dvovrstičnem LCD zaslonu se prikazuje sila in premik. Preskusni stroj je mogoče uporabljati samostojno ali priključen na osebni računalnik prek USB vmesnika. Merjenje poti poteka s kodirnikom, z ločljivostjo 0,01 mm, ki je vidna na LCD zaslonu (notranja ločljivost 0,0001 mm). Stroj je izdelan s standardno obremenitveno celico: 0,03 % linearnosti in pripadajočo kalibracijo. Po želji je mogoče dodati drugi kanal za drugo obremenitveno celico ali merilnik poti. Univerzalni preskusni stroj je izdelan z dvema različnima potema giba, 500 mm ali 1200 mm (brez obremenitvene celice in preskusnega orodja). Dodatni obseg dobave: Obremenitvena celica do nazivne obremenitve, kabel 220 V, USB kabel, navodila, izjava o skladnosti CE. Dodatne informacije najdete v priloženih navodilih. Merilna celica 3000N-5000N Merilno območje: 5-5000 N vleka in tlak, z nominalno 2 mV/V izhodni signal, zaščita pred preobremenitvijo: +/- 1000 %, linearost: +/- 0,05 %, histereza: +/- 0,03 %, ponovljivost: +/- 0,02 %, vključno z 1,5 m priključnim kablom in certifikatom o kalibraciji. Merilnik razteza z dolgim hodom HE, 900 mm merilne poti, merilne roke motorično poganjane, vključno z elektroniko. Natančnost: Razred 1 pri 1 mm poti v skladu s standardom DIN EN ISO 9513 Načelo merjenja: Optično inkrementalno Merilna pot: 900 mm, minus dolžina merjenja Napaka na zaslonu: 6 µm oz. 2 % Ločljivost: 1 µm Delovna sila: 10 cN Standardna začetna dolžina naprave (Lo): 10-100 mm, v korakih po 5 mm Nastavitev Lo je ročna Merilne roke: Odpiranje in zapiranje je motorično poganjano Premer vzorca: 0-30 mm Debelina vzorca: 0-30 mm Širina vzorca: 0-100 mm Teža: približno 32 kg Obseg dobave: Merilnik razteza, kompleten z elektroniko Rezalne glave: po 1 komplet iz karbida / gume Nadomestni deli: Rezalne glave po želji: pravokotne rezalne glave POZOR: Pri uporabi dodatnih rezalnih glav je potrebna ponovna nastavitev omejevala Lo.

Stanje: rabljeno, Technical details: Saw blade diameter: 420 mm Maximum cutting length: 5000 mm Cutting range (H x W): 180 x 100 mm Required air pressure: 6 bar Mitre cuts on both sides: 45° - 90° (manual) Operating voltage: 380 / 220 V Total power requirement: approx. 8.0 kW Machine weight: on request Cedpfx Aou Nigweahjhb Machine dimensions (L x W x H): approx. 6.4 x 1.3 x 2.0 m Circular saw with 2x sawing supports for cutting profiles with mitre cuts up to 45°. Microprocessor positioning control BECKHOFF E 70-300 with absolute encoder Digital display Travel distance per sawing support = 2350 mm, motorized Clamping cylinder for each horizontal and vertical axis, manual Spray device Hydropneumatic feed Use of carbide tipped saw blades

Stanje: pripravljen za uporabo (rabljen), Siemens 1HU3104-0AD01 - Z servomotor SN:E8D10801041001 z Heidenhain ROD426 2500 01-03 dajalnikom Id. 376 846-07 SN:23505000B, Z= G45: vgrajena zavorna zavora, rabljeno, normalne sledi uporabe, 100% delujoče, obseg dobave v skladu s fotografijami, POZOR: Stroške pakiranja in pošiljanja prosimo zahtevajte posebej! Codpfox Dvm Ejx Aahehb

Stanje: novo, Siemens 6SC6500-0NA44 FBG control unit with software, unused, in opened original packaging, in good condition, 100% functional Chodpjxag Hhofx Aahjb

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Swivelling: yes Control: yes Rapid DGL 200 E Double Mitre Saw ----- with 500 mm saw blade diameter, electronic length and angle adjustment (45° and 90°, intermediate angles manually adjustable via scale) Precision cutting of profiles ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System features: ----- - Automatic length adjustment - Manual or electro-pneumatic angle adjustment 45°–90° - Saw blade Ø 500 mm - Extremely rigid machine bed - Complete enclosure of guide bushings around the guide shafts of the saw head - Hardened guide shafts - Swivel axis supported on both sides Application examples: ----- Window, door, façade, conservatory, insect protection profiles; Partition wall systems; interior sliding door elements - PVC, PVC-Alu - Aluminium - Wood, wood-Alu Chsdpfoxmk Agjx Aahsb Perfect dimensional and angular accuracy guaranteed. ----- With the double mitre saw DGL200E, we offer you a reliable quality product from our range of precision double mitre saws, so that you can supply your customers with flawless high-quality construction elements. Cutting lengths can be uploaded to the control system of this double-head mitre saw via network or USB connection, or entered manually via the keyboard. Special software solutions enable automatic positioning for cross cuts, overlengths or short dimensions, allowing processing of lengths outside the machine’s cutting range. An optimisation program with offcut management helps to minimise waste, thus reducing costs and ensuring sustainable use of valuable materials such as aluminium, plastic, or wood. A thermal label printer with dispenser, ergonomically positioned directly beneath the control terminal, enables efficient labelling of finished parts. Good and controlled offcut removal of the base machine can optionally be supplemented with a conveyor belt system. Technical Data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° (up to 135° optional) Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders; 2 vertical clamping cylinders (optional) Length adjustment: electronic Air pressure: 7 bar Dimensions: 5250/1420/1900 mm Weight: 1,260 kg Control ----- PCE 6000 Positioning and length cutting control PCE 6000 based on Windows 10 IOT for modern window manufacturing on RAPID double mitre saws. 128 GB SSD, 8 GB RAM, approx. 10 GB database for cutting programs and profile data. Standard equipment: - Single cut - Program cut - 2x USB interface - TFT screen - Graphical representation of profile cross-sections - Backlit display - Control display integrated in the two-hand control console Optional features at extra cost: - Offcut optimisation - Software stop for overlengths - Software stop for short parts - Cross-cutting function - Profile height measurement device - Label printer (standard label...

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Tiltable: yes Rapid DGL 200 M Double Miter Saw ----- with 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°, intermediate angles can be set manually using the scale. Easy operation and highest quality ----- For precise and burr-free cutting of aluminum, plastic, and wood profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Complete encasement of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and corresponding corrections - Edit the 30 profile numbers (name + correction) directly in the display - The correction is factored in based on the saw’s angle position (45° and 90°) - Piece counter: if the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: converts length and profile height based on the angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-Alu - Aluminum - Wood, wood-aluminium Perfect precision in dimension and angles guaranteed. ----- We use precise and efficient movement technology for this: Linear ball bearings for length adjustment, spring-loaded pivot units for easy and safe angle adjustment between 45° and 90°. Both length and angle adjustments on this double-head miter saw are manual. Greater convenience and higher performance can be achieved with the digital length display and pneumatic tilting unit. With 500 mm saw blades, a wide range of profile systems can be processed. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° Cjdpfx Aaexmk Aashjhb Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5,250/1,420/1,900 mm Weight: 1,260 kg Options ----- - Hydropneumatic feed - Spray system - Stop for short parts - Rubber-coated vertical clamps - Vertical clamps with support plate for profile-dependent parts - Gasket clamping device - Digital length display - External fixed and centrally movable profile supports - Roller supports at the movable or fixed saw unit - Chip extraction system (Technical data as per manufacturer – subject to change/errors excepted!)

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2006, barva: modra, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 5 m³, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 2.000 mm, Leto izdelave: 2006, Vehicle location: Bovenden, Chjdpfoi Rm A Iox Aaheb Body: Box body with integrated 5,000 L stainless steel water tank. Dismantled from Daimler-Benz 1318 AK 4x4 with 3,260 mm wheelbase! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: novo, Leto izdelave: 2025, The 5-axis machine is designed for industrial machining of aluminum and steel profiles with high volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, custom fabrications, façade profiles, and steel profiles are all suitable for machining on this equipment. Chedpfx Aoxt D Szjahsb The frame is made from a welded construction that is subsequently machined. The frame material thickness exceeds 14 millimeters to ensure a level surface and to prevent deformation during transport and/or machine movement. The frame is equipped with 12 adjustable steel feet, which can adapt to any type of floor and are fitted with rubber pads to prevent vibration transmission to the floor. A movable carriage made from welded steel tubes is mounted on the frame and connected by multiple supports to guarantee maximum stability and prevent deflection of the support frame, even during demanding operations on steel or tougher materials. Machining range X: 7,100 mm Machining range Y: 460 mm (4 axes) Machining range Z: 300 mm Machining range A: 180° Machining range C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum rotational speed A: 3,600°/min Maximum rotational speed C: 1,800°/min

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Leto izdelave: 2007, skupna dolžina: 18.000 mm, skupna širina: 6.000 mm, nosilnost: 500 kg, glavna hitrost dviga: 8 mm/min, delovna višina: 4 mm, Naprodaj je rabljeno DEMAG KBK lahko dvigalo, vključno z električnim verižnim dvigalom, električnim pogonskim sistemom, upravljalnim gumbom in obsežno originalno dodatno opremo. Naprava je bila strokovno razstavljena in shranjena na suhem. Idealna za delavnice, montažne prostore, proizvodne obrate, vzdrževanje ali logistiko. Tehnični podatki Proizvajalec: DEMAG Sistem: KBK lahko dvigalo Nosilnost: 500 kg Csdpfx Aszwt Tcsahshb Dolžina tirnice: približno 18,9 m Razpon: približno 6 m Višina dviga: 4 m Hitrost dviga: 8 / 2 m/min Električno veržno dvigalo z električnim pogonskim sistemom Napetost: 400 V Stopnja zaščite: IP55 Leto izdelave verižnega dvigala: približno 2007 Obseg dobave DEMAG električno veržno dvigalo 500 kg Električni pogonski sistem Ročni upravljalnik DEMAG KBK tirnice za dvigalo, približno 18 m x 6 m Pogon Povezovalniki tirnic Nosilci Povezovalni elementi Originalni montažni material Dodatna oprema, kot je prikazano na fotografijah Stanje Rabljeno Razstavljeno in shranjeno Dobro splošno optično stanje Prodaja v stanju, v katerem je Prednosti ✅ Originalna DEMAG kakovost ✅ Obsežen paket dodatne opreme ✅ Kompaktno lahko dvigalo ✅ Hitra montaža je mogoča ✅ Idealno za proizvodne in montažne prostore Ogled Ogled je mogoč po dogovoru v Waiblingenu. Prosimo, upoštevajte, da je prodaja lahkega dvigala mogoča le ob naslednjih pogojih: • Prodaja je dovoljena izključno končnim uporabnikom/proizvodnim obratom (brez nadaljnje prodaje trgovcem) – potreben je ustrezen poslovni profil. • Prodaja je dovoljena samo znotraj Nemčije. Pogoji prodaje/prevzema: • Razstavitev, iznos in transport so v breme kupca in na njegovo odgovornost. • Kupec zagotavlja osebje, orodje in transportna sredstva. Osebje sme delati samo z ustrezno osebno zaščitno opremo, uporabljati se sme samo usposobljeno osebje.

Stanje: rabljeno, Leto izdelave: 2000, Tehnične podrobnosti: Tlak kompresorja: 10 bar Pretok zraka: 1,06 m³/min Hitrost glavnega rotorja: 3920 1/min Skupna poraba moči: 7,5 kW Električna izvedba – napetost/frekvenca: 400/50 V/Hz Masa stroja, približno: 250 kg Dimenzije D x Š x V: 1,5 x 2 x 2 m Chsdszuvwxjpfx Aaheb Profesionalni, zvočno izoliran kompresor z najnižjo ravenjo hrupa v svojem razredu, zasnovan za odpravljanje težav z hrupom v delovnem okolju. Močna črpalka z močjo 5,5 KM zagotavlja najvišjo učinkovitost in zanesljivost. Poleg tega je opremljen z dodatnim zračnim dušilcem, napenjalnim mehanizmom pasu, ki uravnava napetost pasu in olajšuje zamenjavo, ter ventilatorjem za prisilno hlajenje za boljšo hlajenje. Upravljalna plošča s funkcijo zvezda-trikot za enostavno branje in upravljanje je postavljena tako, da je lahko dostopna. Odpirajoča se sprednja vrata omogočajo enostavno vzdrževanje.

Leto izdelave: 2006, stanje: rabljeno, Cross Stacker Gaemmerler KL 540 with integrated Interlocking Device VM 500 The KL 540 cross stacker operates with the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and fully functional Technical Data: Cycle time: Chodpfxeh Nrh Us Aaheb ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo pusher (depending on product) Number of pages: 4 – 96 (heatset / gravure printing) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal pusher) B: 140 – 500 mm D: max. 560 mm Layer height: max. 200 mm Stack height: max. 300 mm Weight: approx. 1,500 kg Interlocking Device Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and an interlocking time of 2 sec. The cycle time per package increases if the interlocking time is extended or the package height is reduced. The cycle time is also significantly influenced by the discharge speed of the cross stacker and thus by the product (surface, format). Formats: Width: 140 to 500 mm (5.5" to 19.7") Length: 105 to 330 mm (4.13" to 13") Stack height: 55 to 400 mm (2.16" to 15.7") Infeed height: 890 mm (35") Discharge height: 890 mm (35") Connection rating: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air requirement: 1000 standard l/min, 6 bar; oil-free, dry air Weight: approx. 500 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, Prodajamo to napravo, takoj na voljo. Za več informacij glejte slike. Csdpfx Aszx D Hcjahehb

Stanje: zelo dobro (rabljeno), Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 500 with grooving table ----- Machine will arrive in stock, cleaned, and fully inspected. Short summary: ----- - 5 spindles - 8,000 rpm - Grooving guide for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller on the outfeed table, hardened: 210 mm wide - Left and top spindle electronically controlled for width and height - Quick-release spindle nut Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 125 - 180 mm Tool diameter rebate cutter: 130 - 160 mm Axial adjustment: 17 mm Rebate attachment MarathonCoating on table insert before 1st bottom tool holder 2nd spindle – right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment: — Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence level: 200 mm 3rd spindle – left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 200 mm Tool diameter for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Pressure shoe before left spindle, including 2 spring-loaded lateral pressure rollers Spindle radial CNC-controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 200 mm Tool diameter for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Spindle radial CNC-controlled Cjdpfxszughzs Aahjhb Split pressure shoe in front of top tool holder, adjustable to tool diameter and can be swung away from the tool, spring-loaded 5th spindle – bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 225 mm Max. profiling depth: 15 mm Axial adjustment: 35 mm Radial adjustment: — Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st bottom tool pneumatically controlled up/down Durofer pointed tooth rollers with depth limiter and self-cleaning Axial adjustment of feed rollers relative to left tool holder, 35 mm Reduced roller spacing relative to right tool Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 volt), 50 Hz Machine base, tables and fences ----- Planer table: 2500 mm long (including straightening rule)...