Ramarch Stiskalnica Za Telo nakup rabljenega (85.012)

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Ijdpfx Ajvvkl Dol Notf Skladišče: Nattheim

Stanje: rabljeno, Leto izdelave: 1989, Delovne dimenzije 3000 x 1250 x 650 mm Hod cilindra 110 mm Iedpfx Aoxu Egvel Netf Dimenzije stroja 3240 x 2120 x 770 mm Teža cca 900 kg

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Isdpfx Ajw Nafksl Notf Availability: Immediate

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Isdpfxoxgvwps Al Nstf Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki - takoj na voljo -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 1998. Material size: 2500 x 1300 x 600 mm Itsdpfxoh Iahgo Al Njf Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Very good condition. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31. Year of manufacture: 2002. Material size: 2500 x 1300 x 600 mm Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). Itsdoh Iahcepfx Al Nef Very good condition. Available immediately.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components Iodpfovxgrrjx Al Notf • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: rabljeno, Leto izdelave: 1993, rabljeno, vrhunsko stanje Proizvajalec: Hess Tip: Express Leto izdelave: 1993 Strojna št.: 100914/28 Število cilindrov na stiskalni element: 2 – hod 110 mm Število stiskalnih elementov vodoravno: 3 Število stiskalnih elementov navpično: 3 Delovna širina: 2500 mm Delovna višina: 1350 mm Globina stiskanja: 600 mm pnevmatsko Električna nastavitev višine Potrebni prostor pribl. 3600 x 800 x 2450 mm Teža pribl. 1200 kg Skladišče: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v dejanskem stanju, kot je bilo ogledano, brez garancije ali jamstva Itsdpoxuv N Uofx Al Nsf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Gannomat Mod. 260 Case Clamp Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Space requirements: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 CE compliant The machine is currently being reconditioned; additional pictures will follow shortly. Ijdpferfbnbex Al Netf

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus Iodpfsdx R Dmox Al Notf • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika Ijdodx R Dtjpfx Al Nstf 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: zelo dobro (rabljeno), A) Case clamp with CNC (electronic) Type MDE 110/28/08 Itsdelkbn Ispfx Al Nof Motorized transport and assembly conveyor Feed speed: 12 - 40 m/min CNC control Power Control PC C 22 T Total power 14 kW Overall machine length 6,220 mm Processing capacity for workpieces (mobile): Length Min / Max: 250 / 2,800 mm Depth Min / Max: 120 / 800 mm Height Min / Max: 280 / 1,320 mm B) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm) C) Motorized transport conveyor Mod. MTB 200/20/08 (length 2,000 mm)

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm Itodow Sgnkjpfx Al Nof - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. Itedpfx Alsb Eln Do Nof The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. Itedpfxeiidm No Al Njf - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: dober (rabljeno), Korpusna preša, okvirna preša Korpus maks. 3000 x 2000 mm Zaščitna ograjna postavitev Varnostna svetlobna zavesa Sick C2000 Upravljalni panel Beijer Electronics E300 Operator Interface Odvod obdelovanca preko valjčnega zobatega trakovnega transporterja Krmilna omara Programirljivi krmilnik Mitsubishi Q2ASCPU Mitsubishi A1SX81 Zaščitni pokrov Varnostna svetlobna zavesa C2000 služi kot zaščita rok za varovanje nevarnih točk na strojih in napravah. Možno je tudi financiranje preko naše banke. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši spletni trgovini! Stroški mednarodne poštnine na zahtevo! Itjdpevdchgjfx Al Nof

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, številka stroja/vozila: 941, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, delovna višina: 1.350 mm, delovna dolžina: 2.500 mm, TEHNIČNE PODROBNOSTI Dolžina stiskanja: maks. 2.500 mm Višina stiskanja: maks. 1.350 mm Delovna globina: maks. 600 mm PODROBNOSTI O STROJU Električni podatki Itedpfx Aloxnyg Rj Nef Nazivna napetost: 3/N/PE/400 V Nazivni tok: 11 A Nazivna moč: 4,7 kW Frekvenca: 50 Hz OPREMA Vertikalni in horizontalni pritiskalni nosilci z elektromehanskim pomikom Ustvarjanje pritiska prek frekvenčno vodenih zobniških motorjev Pritisk stiskanja vertikalno in horizontalno nastavljiv ločeno Čas stiskanja nastavljiv

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 221/93, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 16A Pneumatic connection 6 bar Total machine length 4300 mm Total machine width 1300 mm Maximum pressing length 2650 mm Isdpfx Ajk Tzwdel Njtf Pressing width 1000 mm Pressing height 1000 mm Pressing pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing

Stanje: rabljeno, številka stroja/vozila: 008256, Največja obdelovalna širina: 800 mm Iedpfxex A Hfvj Al Njtf Največja obdelovalna dolžina: 2500 mm Največja obdelovalna višina: 1340 mm Največja pomična hitrost: 40 m/min

Stanje: rabljeno, številka stroja/vozila: 008254, Maksimalna obdelovalna širina: 700 mm Itsdpfx Alsx A Hfpo Nof Maksimalna obdelovalna dolžina: 2600 mm Maksimalna obdelovalna višina: 1300 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation Itedpfx Aewyc H Tol Nof - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 10 h, številka stroja/vozila: 2709, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, premer valja: 76 mm, delovna širina: 2.070 mm, najv. debelina pločevine: 1 mm, skupna masa: 630 kg, moč: 0,75 kW (1,02 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, Ponujamo kot novo 3-valjno krožno prečno upogibalko OSTAS SM 2070X76, letnik izdelave 06/2024. Model: SM 2070X76 Leto izdelave: 06/2024 Moč motorja: 0,75 kW Ijdpjy A Nv Tjfx Al Njtf Skupna teža: 585 kg Obratovalna napetost: 380 V Serijska številka: 2709 Frekvenca: 50 Hz Hitrost motorja: 50 vrt/min Stroj je v odličnem stanju z zelo malo delovnimi urami. Za dodatna vprašanja ali informacije nas lahko kontaktirate preko sporočila ali telefona.

Stanje: dober (rabljeno), Leto izdelave: 2014, Peletna stiskalnica Proizvajalec – TEKNO UNO Model – TK 304 Itedpfx Ajvdrtxol Nef Leto – 2014 Moč motorja – 50 kW Kapaciteta – 450 kg/h

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Stroj za izdelavo žebljev Ijdpfx Ajuhxqmsl Nstf Proizvajalec: WAFIOS Model: N90 Leto izdelave: 1994 Območje premera: 2,5-3,8 mm Dolžina žebljev: 50-90 mm Kapaciteta – kosi/min: 800 Stroj vključuje avtomatski rezalnik žice in čistilec žice!!

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, DAVI_MCB 3060 WT 4-válcová ohýbačka plechu CNC _ 3000x65 MM – rok výroby 2007 Parametry stroje: Iodsy D Npijpfx Al Nstf Kapacita šířky plechu: 3 100 mm Tloušťka plechu: 65 mm Předohyb: 55 mm Průměr horního válce: 600 mm Průměr spodního válce: 550 mm Osazení a vybavení: • Povrchové kalení všech čtyř válců • Dvojité předepnutí s nastavitelnou silou dle tloušťky plechu • Hydraulický přípravek pro kuželové ohýbání – tvrzená opěrka • Pohon válců: Přímý hydraulický pohon každého válce top/bottom převodovkou • Kalibrační systém pro převalování a zaoblování svařovaných plášťů • Samostatný elektrický ovládací pult s centrálním ovládáním, joystickem a CNC displejem • CNC řídicí jednotka DAVI GENIUS: poloautomatické i plně automatické programování, digitální odečet všech 4 válců také při ručním provozu • Hydraulicky ovládané čelní sklápěcí čelo pro vykládání uzavřených plášťů • Plynulé nastavení pracovní rychlosti s interpolací os • Bezpečnostní zařízení s nouzovým zastavením • Uživatelské a servisní manuály Elektrické napájení: 3-fázové, 380 V / 50 Hz, výkon 75 kW Příslušenství: - 1× horní podpěra, hydraulicky ovládaná, ID skořepiny max. 5 m – CNC programovatelná - 1× boční podpěra vlevo, hydraulická - 1× boční podpěra vpravo, hydraulická - Příložník pro výkyvné podávání tabule plechu při kuželovém ohýbání