Qtm Unipal nakup rabljenega (15)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, Rešitev za paletiranje s kolaborativnim robotom (kobotom) - razbremeni zaposlene težkega dvigovanja in monotonega, fizičnega napora Hodpfx Aberbz Rxonjnr - sistem je mogoče s konfiguracijo prilagoditi individualnim potrebam - zahteva manj prostora kot običajne rešitve za paletiranje (dimenzije 2.650 x 1.600 mm) - ni potrebna stacionarna varnostna tehnika, zato je UNIPAL enostavno in prilagodljivo uporaben - nadzorna plošča za pregled nad procesom - nosilnost do 22 kg in višina paletiranja do 2.200 mm - hitro in enostavno preurejanje - Plug-and-Play (potrebuje 230 V napajanje) in 6 barov stisnjenega zraka

Stanje: dober (rabljeno), Tehnični podatki o paletni regalni prečki: Regalni sistem: Metall Sistem Tip: Unipal Vsebina dobave: 01x paletna regalna prečka, rabljena Hnodpfxjxb Tp Es Abnsr Barva materiala: rumena Škatlasti profil: 140 x 45 mm Čista širina: 1.800 mm Vaše kontaktne osebe pri nas: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Ta artikel je na voljo samo za osebni prevzem. Kakršen koli transport ali pošiljanje tega izdelka je povezan z dodatnimi stroški, ki jih je mogoče posebej preveriti glede na kraj dostave oz. obseg dobave.

Stanje: rabljeno, Hobelna linija Weinig, tip Unimat 23 E + Uniplan 23, vključno s povratnim transporterjem. NC-krmiljena linija za hoblanje in profiliranje okvirjev oken, vključno z odrezavanjem letvic za steklo ali drugimi hobelarskimi nalogami, z avtomatskim vračanjem obdelovancev operaterju. Hnedpjzrxzusfx Abnor Tehnični podatki: - Vretena: 4 + 2 - Delovna širina: 230 mm - Delovna višina: 120 mm - Vreteno 1: 7,5 kW / 50 mm / 8.000 vrt/min - Vreteno 2: 11 kW / 50 mm / 8.000 vrt/min - Vreteno 3: Skupni motor z vretenom 2 / 50 mm / 8.000 vrt/min - Vreteno 4: 7,5 kW / 50 mm / 8.000 vrt/min - Vreteno 1 Uniplan: 5,5 kW / 50 mm / 7.200 vrt/min - Vreteno 2 Uniplan: 5,5 kW / 50 mm / 7.200 vrt/min - Podajalna hitrost: 5-24 m/min - Upravljanje: PC-krmiljenje Nexus - NC-osi: Unimat 2 & 3, Uniplan 1

Stanje: rabljeno, Hidravlični stroj za fino obdelavo površin Weinig Uniplan 23 za obdelavo površin z obeh strani, kot alternativa brušenju (npr. pri proizvodnji oken) z zmogljivimi vreteni. Stroj za ravnanje robov Hsdpfx Aezrxydebnenr Nasprotno ležišče Komplet za kratke dele Odlično ohranjeno originalno stanje Tehnični podatki: - Vretena: 2 - Razporeditev vreten: spodaj (7,5 kW) - zgoraj (7,5 kW) - Delovna širina: 230 mm - Delovna višina: 120 mm - Premer vretena: 50 mm - Hitrost podajanja: 3 kW // maks. 36 m/min - Hitrost vrtenja vretena: 7.200 vrt/min

Stanje: rabljeno, Rabljen nadzorni omarici Weinig, tip Uniplan, ki se lahko uporabi za nabavo rezervnih delov ali za ponovno izdelavo nadzornega omarice z nadzorno ploščo. Tehnični podatki: Hodpfx Abezrxtdjnsnr - Na voljo: št. 1 in št. 2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 55.000 h, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 36.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840 D, število osi: 3, This 3-axis portal milling machine, Unisign uniport 6000, was manufactured in 2010. It offers an impressive X-axis travel of 10,000 mm, a Y-axis travel of 1,500 mm, and a Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and an automatic tool changer with 30 positions. If you are looking for a high-quality milling machine, you should consider the Unisign uniport 6000 gantry milling machine, which we are offering for sale. Contact us for more details. • Required space: approx. 12 x 11 m • Clearance: height 1,000 mm / width 1,500 mm • Maximum torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capabilities (C45): Drilling Ø 120 mm / Tapping M55 / Milling 100 cm³/min • Design: Gantry construction with movable portal bridge and stationary clamping table Hodpfoy A Ifmex Abnsnr • Table configuration: clamping strips in transverse direction, spaced 750 mm apart (standard table plates omitted) • Tool changer: automatic tool change; 30-position chain magazine mounted on portal column (tool changes into angle head possible) • Operating mode: pendulum machining possible • Cooling: machine cooling unit; water-air heat exchanger integrated in the control cabinet • Coolant system: dry operation; pre-equipped/prepared for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer service in 2023 • Installation: machine recessed and anchored in a machine pit Additional equipment: • Angle drilling and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare probe Hexagon RWP 20.50-M • Hydraulic clamping device with clamping bridges for axle machining, including hydraulic power unit • 1x T-slot clamping plate (2,500 x 1,200 mm) as an alternative to the hydraulic device • Chip conveyor: hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Partition wall with viewing window • Installation and leveling elements • Various spare parts • Documentation included Technical specification: Taper size SK 50

Leto izdelave: 1995, stanje: dober (rabljeno), planing width 220 mm planing height 140 mm max tool diameter 160 mm main motors 2 x 5.5 kW feed motor 3 kW feed speed 6 – 36 m/min (with frequency inverter) feed via cardan shafts double-sided supported cutterheads Hnsdeg E Uqcopfx Abnsr electric height adjustment

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, EDF Flexy Feed Prefeeder Casemaker EDF 821 FD Full Servo Swing ne-zasujev podajalnik 6 barvnih fleksotiskarskih enot zgoraj, fiksni tip (odpirajo se za vzdrževanje) 6 infrardečih sušilnikov Vakuumski transport med tiskarskimi enotami iz jeklene platforme in trakov Dvojno-gredna režirna enota Rotacijski izsekovalnik z zgornjim izklopom za zamenjavo izsekovalnega orodja med delovanjem stroja Prenosna odstranjevalna enota pred lepilnikom zlagalnikom Prenos zlagalnika-lepilnika z vakuumom, v celoti servo nadzor Valco Clear Vision lepilna enota Odstavnik EDF Unipal paletizer z avtomatskim vstavljalnikom listov in palet Hedpfx Ajwhy Abebnjnr Siemens elektronika Na voljo avgusta 2027

Leto izdelave: 1999, stanje: delavnici obnovljeno (rabljeno), The machine is currently undergoing refurbishment. PROCESSABLE MATERIALS Depending on material properties and sheet configuration: - Paper with a basis weight of at least 80 g/m² - Cardboard or solid board up to a basis weight of 2,000 g/m² and corrugated board up to a total thickness of 4 mm (maximum sheet curvature 4%) PERFORMANCE DATA Maximum sheet size: 820 x 1,130 mm Minimum sheet size: 350 x 400 mm Maximum cutting force: (400 t) 4.0 MN Maximum machine speed: 9,000 sheets/hour Basic equipment of the machine: Feeder High-performance non-stop sheet feeder W3 equipped with: • Automatic non-stop device Hedpfoyuuzdjx Abnsnr • Automatic pallet change system • A suction head • Double sheet detector • Motorized pile side lay adjustment • Motorized suction head adjustment • Belt table with pneumatic cover frame • Compressed air and vacuum pump Register table • Operator side side lay, can be switched between pull or push mode • Light sensor for precise sheet side alignment detection • Fine adjustment of side lay • Two active front lays with light barrier for register control • Two inactive front lays for stabilization of sheet registration • Separate fine adjustment of the gripper margin for drive and operator side • LED display for correct front and side lay registration • Arrival trend display for sheet feed • Miss sheet rejection which disables only the feeder • Height-adjustable top lay for precise sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guidance for the cutting plate on swing-out carrier arms • Motorized adjustment of die-cutting pressure • Automatic device for raising the chase to the platen • Electronic cutting force display with maximum pressure limitation • Vacuum unit under the table for thin die-cutting plates Stripping section • Frame drive and frame lift for the upper tool frame • Stripping board holder with Centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery section • Fully automatic package stacking device, pre-selectable • Counted part piles by automatic insertion of uncut sheets • Can form sheet bundles (interleaving sheet weight min. 250 g/m², max. 800 g/m²) • Frame lift for the upper tool frame • Holder for change frames with motorized adjustment in running direction • Pneumatic frame locking • Selectable gripper opener cam and sheet pusher • Sheet alignment device • Integrated conveyor belt for removing gripper edges or waste grid (double cut) • Separator sheet magazine with electronic level control, refillable from the B-side during production • Tool frame with Centerline • Change frames for standard sheet delivery / gripper edge removal • Change frames for stripping grid • Mounting kit for separator punch • 8 x sheet hold-downs for standard sheet delivery • 4 x cross support rods Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control system retrofit to latest Siemens S7 controller • New generation frequency inverters • Modem for remote service connectivity • Machine height extension: 900 mm

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 740 x 1,060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 9,000 sheets/h Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at the feeder Hodpfx Abslyp Emonsnr Blanking station Automatic non-stop roll apron Centerline Including platform 1 tool set Machine delivery time: 6-8 months after order

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 570 x 820 mm Min. sheet size: 230 x 280 mm Maximum die-cutting force: 1.8 MN Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 gsm Cardboard: up to 2,000 gsm Corrugated board: up to 3 mm Equipment: Sheet feeder Blanking station Automatic non-stop feeder apron Hnedpfolyqpdox Abner Centerline system 1 tool set Delivery time: 6–8 months after order

Leto izdelave: 2026, stanje: novo, Specification: Max. sheet size: 740 x 1060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 8,000 sheets/hour Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Non-stop feeder Manual non-stop device at feeder Blanking station Automatic non-stop rolling carpet Centerline Including platform 1 tool set Hnsdpfolyqrcox Abner Delivery time for the machine: 6–8 months after order

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 6.334 mm, skupna širina: 4.390 mm, skupna višina: 2.465 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, and waste stripping Technical Data: Max. sheet size: 830 x 1,150 mm Min. sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300 t) Speed: 7,000 sheets/h Materials processed: Paper min. 80 g/m² Hnjdst H Nc Sepfx Abnsr Cardboard up to 2,000 g/m² Corrugated board up to 4 mm Equipment: Automatic non-stop roll-up delivery board Stripping station Centerline Quick-lock frame for upper stripping tool and central stripping board Pneumatic chase and die plate locking APC 1 – automatic die-cutting pressure system APC 2 – platen tilting at platen exit 1x 4 mm cutting plate incl. 10x 1 mm cutting overlays 2x 5 mm cutting plates 2x chase frames without quick lock Including platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.400 mm, skupna dolžina: 7.800 mm, skupna višina: 2.500 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, waste stripping, and blank separation Hnjdpfx Ast H Nhhebner Specifications: Maximum sheet size: 830 x 1,150 mm Minimum sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300t) Speed: 7,000 sheets/hr Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic pile alignment at feeder 10” display at feeder Automatic non-stop delivery roll apron Stripping station Blank separation station Centerline system Automatic separator sheet inserter for stabilising blank stacks Quick-lock frames for upper stripping tool and central stripping board Quick-lock frames for upper and lower blanking tools Pneumatic chase clamps and die plate locking APC 1 – automatic cutting pressure control system APC 2 – platen tilting at the delivery end 1x 4 mm cutting plate incl. 10x 1 mm cutting plates 2x 5 mm cutting plates 1x quick-lock chase 2x chases without quick-lock QTM fine adjustment for cutting plates Sheet monitoring at each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder designed for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for stripping internal waste as well as side and trailing edges of the sheets ⦁ for stacking the die-cut and stripped sheets with the attached gripper edges, or ⦁ for separating gripper edges and subsequently stacking the remaining blanks ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a pile stacking device enabling fully automatic separator sheet insertion and NON-STOP delivery, with no changeover required even for the smallest cut formats (exchange table with comb structure) ⦁ separator sheet magazine with automatic level control, refillable during operation ⦁ equipped with Centerline system ⦁ with automatic pallet changer at the delivery section Specifications Maximum sheet size: 760 x 1060 mm Hnedsww E Nrjpfx Abnjr Minimum sheet size: 350 x 400 mm Maximum die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Materials processable: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4%) Equipment: Optical sheet alignment (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at the delivery section including platform quick-lock frames in all tooling stations