Pramac P 5000 nakup rabljenega (42.625)

Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Pramac generator P 5000 — Letnik 2024 Rabljeno iz profesionalnega najemnega parka Kurt König Baumaschinen GmbH, Einbeck. Stanje & informacije: - Stanje: Rabljeno iz najema, redno servisirano - Delovanje: Popolnoma delujoč - Fotografije izdelka sledijo — v primeru interesa nas kontaktirajte za aktualne slike - Ogled možen po dogovoru v 37574 Einbeck Dsdpsy A Hdbsfx Ah Dsck Cena: 800 EUR + DDV | EXW Einbeck | Dostava na zahtevo

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Brand: Pramac GBW 22 P DDS Soundproof Canopy: 66 dB(A) at 7m Continuous Output (3-phase): 20.12 kVA / 16.10 kW Maximum Output (3-phase): 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Perkins 404J-22G Emissions Standard: STAGE V Cooling System: Water Cylinders: 4 in-line Displacement: 2220 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Engine Control: Mechanical Djdpfxjq A T Dwj Ah Deck Fuel Consumption at 3/4 Load: 4.0 liters/hour Fuel Consumption at Full Load: 5.74 liters/hour Fuel Tank Capacity: 51 liters Alternator: MeccAlte ECP28-M4 C Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR regulation) Digital Controller: ACP Sockets with RCD: 1x 32A - 400V / 5-pin Dimensions and Weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank Capacity: 51 liters Weight, dry: approx. 546 kg Central Lifting Eye Forklift Pockets Glow Plugs Engine Preheating (PHS) Battery Trickle Charger

Stanje: novo, Continuous output: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 litres Generator type: Protection class IP21, MeccALte Dcsdpfxoq A T Eue Ah Dek Starting system: Electric start Generator with AVR regulation Dimensions and weight: Length (mm): 1645 Width (mm): 870 Height (mm): 1072 Weight, dry: 640 kg Key start Sockets: 1 x 32 A 400 V 1 x 16 A 400 V 1 x 230 V Schuko 2 x 16 A 230 V CEE

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Make: PRAMAC GDW 65 P FS3A Sound pressure at 7 m dB(A): 62 Sound power level LWA dB(A): 91 Continuous output: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: Perkins 1104D-44TG3 Emission stage: IIIA (approved for stationary use only!) Cooling system: Water-cooled Cylinders: 4 in-line Displacement: 4400 cm³ Dedeq A U Amepfx Ah Djck Aspiration: Turbocharged Speed: 1500 rpm Engine control: Mechanical Fuel consumption at 3/4 load: 11.73 liters Fuel consumption at full load: 15.81 liters Fuel tank capacity: 300 liters (steel tank) Generator: MeccAlte ECP32 2M4 C Type: Brushless Number of poles: 4 Regulation: Electronic (AVR control) Digital control: ACP ComAp IL3 AMF25 3-pole generator circuit breaker Terminal block Dimensions and Weight: Length: 2400 mm Width: 1040 mm Height: 1745 mm Weight (dry): 1220 kg Forklift pockets accessible from two sides Oil drip pan Lifting eyes for crane Manual battery master switch Engine pre-heating Manual engine oil extraction pump 3-way valve with bayonet quick coupling

Leto izdelave: 2023, stanje: novo, Neprekinjena moč: 20,12 kVA / 16,10 kW Napetost: 230 V / 400 V Frekvenca: 50 Hz Motor: Perkins 404J-22G Gorivo: dizel Prostornina rezervoarja: 51 litrov Tip generatorja: zaščitni razred IP21, MeccALte Dodpsmw Ui Rofx Ah Djck Način zagona: električni Agregat z regulacijo AVR Dimenzije in teža: Dolžina (mm): 1645 Širina (mm): 870 Višina (mm): 1072 Teža (suha): 640 kg

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Make: PRAMAC GDW 65 P FS3A Sound pressure at 7 m dB(A): 62 Sound power LWA dB(A): 91 Continuous output: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volts Frequency: 50 Hz Dcjdpfxeq A U Aqo Ah Dok Diesel engine: Perkins 1104D-44TG3 Emission standard: Stage IIIA – approved for stationary operation only! Cooling system: Water-cooled Cylinders: 4 in-line Displacement: 4400 cm³ Aspiration: Turbocharged Speed: 1500 rpm Engine control: Mechanical Fuel consumption at ¾ load: 11.73 liters Fuel consumption at full load: 15.81 liters Fuel tank capacity: 300 liters, metal tank Generator: MeccAlte ECP32 2M4 C Type: Brushless Number of poles: 4 Regulation: Electronic (AVR control) Digital control ACP ComAp IL3 AMF25 3-pole generator circuit breaker Terminal strip Dimensions and weight: Length: 2400 mm Width: 1040 mm Height: 1745 mm Weight (dry): 1220 kg Forklift pockets accessible from two sides Oil drip tray Lifting eyes Manual battery master switch Engine preheater Manual engine oil extraction pump 3-way valve with bayonet quick coupling

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 220028, CNC-nadzor: HEIDENHAIN iTNC 530, poti gibanja osi X: 4300 mm, osi Y: 1500 mm, osi Z: 1300 mm, velikost mize: 4970 mm x 1200 mm, največja obremenitev mize: 15.000 kg/m, vpenjalna glava za orodje: ISO 50, večkotna glava za rezkalnik: 45 °, avtomatsko pozicioniranje kota osi B in A, moč vretena: 22 kW, hidravlična blokada vretena, delovni pomik: 10000 mm/min, hitri pomik: 20000 mm/min, s sistemom za hlajenje, skupno število delovnih ur vretena: 25.496 ur. Dcodpfx Ahjzn A U Re Djk

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG control system StoreControl P External dimensions: Construction height: 5000 mm Construction width: 2650 mm Construction depth: 1250 mm plus 300 mm storage table 34 carriers, each with a payload of 140 kg with clear usable dimensions: Height = 220 mm Width = 2220 mm Depth = 410 mm Chain pitch: 254 mm Storage table positioned 1000 mm above finished floor level, equipped with a wooden worktop Color: GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 1.8 kW / 400 Volt Subject to errors and technical modifications Delivery and assembly currently mainly in Germany, Austria, and several neighboring countries Dcsdpfx Ahjdnfdle Djk

Stanje: skoraj kot novo (rabljeno), 24000 kg Dcjdoxcuyuepfx Ah Dek Dolžina 5000 mm Širina 2500 mm Višina nakladanja 700 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, vključno z napravami Sheetmaster, Toolmaster in Gripmaster Delovni čas: 11.800 ur Dsdpfxezp Dwpe Ah Dsck Lokacija na zahtevo Slike na zahtevo

Stanje: rabljeno, Funkcionalnost: nepreverjeno, V tej ponudbi pridobite rabljeno koordinatno merilno napravo »Keyence XM-5000«. Predmet prodaje: 1x Keyence XM-5000 s naslednjo opremo: vključno z prenosnim računalnikom in programsko opremo za uporabo vključno s transportnim kovčkom vključno s polnilno postajo za baterijo vključno s stojalom Stanje: Ta ponudba se nanaša na rabljeno napravo, ki lahko ima znake uporabe (manjše praske ali porumenelost). Naprava je bila testirana in je delujoča. Pakiranje in pošiljanje: Napravo si lahko ogledate v času naših delovnih ur. Prosimo, dogovorite se za termin! Po dogovoru je možno tudi pakiranje za transport po morju in pošiljanje po vsem svetu. Dsdpfxsy Iaayo Ah Djck Pred pošiljanjem ali prevzemom bomo za vas posneli video posnetek funkcionalnega testa. Za dodatne informacije se lahko seveda tudi osebno obrnete na nas.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Dcjdpfozpvdzsx Ah Djk Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 500 kg, Varilna vrtljiva miza, L manipulator, pozicioner, odlično stanje, z dodatnim vpenjalnim diskom vključenim. Funkcije: vrtenje, nagibanje (obrnjeno na glavo), brezstopenjsko nastavljiva hitrost. Mehanska nastavitev višine: 800 mm - 1100 mm. Iztek: 1000 mm. Gradbena višina: 1800 mm. Dolžina: 3000 mm. Širina: 1100 mm. Premer vpenjalnega diska: 1000 mm. Dedpfxeylkn Ie Ah Dsck

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Dcjdpfxjzfwyco Ah Djk Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 261 h, številka stroja/vozila: HEI0009695, vrsta goriva: dizel, proizvajalec motorjev: Baudouin 12M26 G1000/5, Namen uporabe: Gradbeništvo Lastna teža: 18.000 kg Moč generatorja: 1.016 kVA Dimenzije tovornega prostora: 1219 x 244 x 258 cm CE oznaka: da Država proizvodnje: IT Za več informacij kontaktirajte ekipo DPX. = Dodatne možnosti in oprema = - Baterija - Nadzorna plošča Dsdoyv Umkjpfx Ah Deck - Jeklena streha - Rezervoar

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package Dcsdpfx Aowbknbsh Dok ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, proizvajalec motorjev: FPT, vhodna frekvenca: 50 Hz, Manufacturer: PRAMAC Sound Pressure Level at 7m dB(A): 64 Continuous Output: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel Engine: FPT IVECO F 34 TCA Dcsdpfjtq Hccox Ah Djk Emission Standard: STAGE V Cooling System: Water-cooled Cylinders: 4 in-line Displacement: 3,400 cm³ Aspiration: Turbocharged / intercooled Speed: 1,500 rpm Starter: 12V Engine Control: Electronic Exhaust gas recirculation, diesel particulate filter, catalyst Fuel Consumption at 3/4 Load: 8.32 liters Fuel Consumption at Full Load: 13.99 liters Generator: MeccAlte ECP32-2M4 C Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR control) DEEP SEA ACP Digital Control DGUV TYPE B Main Insulation Monitor Sockets with RCD Type B: 1x 63A 400V / 5P 1x 32A 400V / 5P 1x 16A 400V / 5P 1x Schuko Dimensions and Weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,250 kg Fuel Tank: 209 liters Acoustic Enclosure: RAL 9016 white Main Battery Switch Oil Drip Pan Three-way Fuel Valve WSP Water-separating Diesel Filter Document Holder Galvanized Base Frame with Forklift Pockets

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Brand: Pramac GWB 22 Y CDS Soundproof Canopy: 64 dB(A) at 7m Continuous Power Output: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Yanmar 4TNV88 BIPGE Emission Standard: STAGE V Cooling System: Water-cooled Cylinders: 4 in-line Displacement: 2190 cm³ Aspiration: Naturally aspirated Dsdeq A U Axspfx Ah Dsck Speed: 1500 rpm Engine Regulation: Mechanical Electric Start Fuel Consumption at 3/4 Load: 3.87 litres/hour Fuel Consumption at Full Load: 5.17 litres/hour Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR) Manual Control Panel: - Key Start - Voltmeter, Ammeter, Hour Meter - Engine Fault Indicator Sockets: - 1 x Schuko 220V - 2 x CEE 16A - 230V - 1 x CEE 16A - 400V - 1 x CEE 32A - 400V Dimensions: Length: 1645 mm Width: 870 mm Height: 1072 mm Tank Capacity: 51 litres Weight: approx. 560 kg Lifting Eye Forklift Pockets

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. Dcjdpsvu Syyjfx Ah Djk TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: novo, Leto izdelave: 2026, Board Stacking System: Manufacturer: Stoiber GmbH Model: StoStack 5000 - Layer Stacking Condition: New Price & Location: Price on request AT – 4122 Arnreit Description: Universally applicable board stacking system for the efficient stacking of rough-sawn boards, posts, battens, as well as planed timber. System Advantages: • Fully automatic, flush stacking • Air-gap stacking • Easy operation via touchscreen • No pneumatic components, enabling unrestricted operation even in frost conditions Technical Data: • Flexible stacking width: up to 1200 mm • Stacking height: up to 1200 mm • Board length: from 1500 mm • Board/Post width: 50 – 300 mm • Board/Post height: 15 – 120 mm • Maximum board/post weight: 75 kg Dedpfx Ahetv E D Us Dsck • Maximum layer weight: 500 kg • Cycle rate: up to 25 pieces per minute Options: • Alignment rollers for longitudinal alignment of sawn timber • Ejector for sorting out defective boards • Electrically adjustable side supports • Mobile machine frame: use at multiple workstations by moving the machine on rails or with a forklift

Stanje: rabljeno, Rabljeno kopirno stružnico HAPFO, tip AP 5000/ME, za profesionalno uporabo pri obdelavi lesa. Stroj se uporablja za kopirno struženje obdelovancev in je primeren za tipična struženja in oblikovanje lesa. Dcodpfxozrx Sae Ah Djk Tehnični podatki: - Razdalja med centri: 1.300 mm - Višina med centri: 250 mm - Motor: 1,4 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 10.020 h, stiskalna sila: 173 t, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, Press brake from 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 offers a maximum press force of 1700 kN and a stroke length of 445 mm. It is equipped with the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control unit for efficient programming. If you are looking for high-quality bending performance, consider the TRUMPF press brake TRUBEND CELL 5000, which we are offering for sale. Contact us for further details. - Press brake model: TruBend 5170 (extended version) - Maximum press force: 1700 kN - Maximum working pressure: 340 bar - Stroke length: 445 mm - Voltage / Frequency: 400 V / 50 Hz - Connected load: 29 kVA - Control voltage: 24 V - Robot model: BendMaster 60 - Robot connected load: 17 kVA - Robot weight: 2600 kg - Robot voltage / frequency: 400 V / 50 Hz - Control system: TRUMPF TASC 6000 (graphic workshop programming, network capable) - Included equipment: extended version press brake, BendMaster 60, automated material handling/gripper, safety fencing and enclosure TRUMPF BENDMASTER 60 - Operating hours: 56,582 h (as of 14.05.2025) - Load capacity: 60 kg (sheet part plus gripper) - Sheet load capacity: up to 40 kg - Supply voltage: 400 V (3-phase) - Frequency: 50 Hz - Connected load: 14 kVA - Control voltage: 24 V - Max. fuse protection: 32 A - Manipulator axis system: 6-axis backgauge sensor system - Floor rail: floor rail extended to 10 m - Control unit: PC-based TRUMPF control with terminal (monitor, mouse, keyboard) - Material handling features: contour recognition sheet sensor, double-sheet detection sensor, rotary feedthrough for quick tool-free gripper change, gripper coupling on BendMaster Dsdpfx Aeza U Nfoh Dock - Supplied vacuum/gripper system: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (incl. 3 sets of additional jaws) - Loading station: 1 sheet removal station with linear axis - Peripheral accessories: 1 gripper change console (max. 4), 1 mobile fan magnet, safety fencing with access door Technical Specification Bending length: 4250 mm

Stanje: rabljeno, Namizni model stiskalnice za lepljenje blokov Müro s pihalnikom toplega zraka Stiskalnica za lepljenje blokov - Müro BLP 5000 Leto 2003 - Serijska št. 20/2003 Delovna širina 350 mm Dcodpfx Ahjynll Hj Dek Največja višina zloženega kupa 220 mm S pihalnikom toplega zraka Spletni video ogled preko WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnberg - Takoj na voljo - Možen preizkus

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Širina pločevine: 3000 mm Dolžina pločevine: 1500 mm Debelina pločevine: 8 mm Teža obdelovanca: 200 kg Največja prebijalna sila: 220 kN Skupna priključna moč: 9,5 kW Prostorska potreba približno: 7395 x 6540 x 2072 mm Oprema: Prebijalna glava: - Hidravlični nosilec posameznega orodja z rotacijo 360° - Ročno nastavljiva moč pritisnega elementa - Programabilni pritisni element (aktivno/pasivno/donastavitev) - Razpršilno mazanje orodja - Števec gibov (štancev) orodja - Nadzor nivoja za oblikovanje navojev in mazanje orodja Krmiljenje: - Odprto krmiljenje na osnovi Sinumerik 840 D - 12" TFT barvni zaslon - Teleservis preko interneta - Samodejni izklop Prenos podatkov: - USB vmesnik - RJ-45 omrežni priključek Varnost: - CE oznaka - Dvotočkovni svetlobni zavesi - Hitra zaustavitev hidravlike Dcedpfjy Sak Tox Ah Djk - Zaznavanje zvijanja pločevine Programiranje: - TruTops Punch preko omrežnega dostopa 1 x funkcija MultiTool 1 x funkcija MultiShear 1 x funkcija oblikovanja navojev 1 x funkcija za raziglevanje in valjčno tehnologijo 1 x funkcija SoftPunch 4 x posamično odpirajoče se vpenjalne čeljusti 4 x višinsko nastavljive vpenjalne čeljusti 1 x dodaten cilinder 1 x senzor za izhod delov (vključuje obdelavo brez preostale mreže) - GripMaster - Klešče za ostanke mreže s senzorji - Škarjast dvižni stroj 400 mm - Nagibna paleta za ostanke mreže 3000 x 1500 mm - SheetMaster - Obratovalne ure: 65.000 h

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 1.356 h, nosilnost: 4.500 kg, dvižna višina: 5.000 mm, težišče tovora: 600 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 3.500 mm, vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 1.250 mm, dolžina vilic: 1.250 mm, širina vilic: 150 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 200X50-10, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 250-15, skupna masa: 11.440 kg, lastna masa: 6.940 kg, skupna višina: 2.600 mm, skupna dolžina: 2.500 mm, skupna širina: 2.250 mm, barva: oranžna, Oprema: CE označba, bočni pomik, kabina, osvetlitev, pogon na vsa štiri kolesa, vilice za palete, HUBTEX DQ45G – 2017 | 1365 MTH | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for work from day one – no investment, no risk ✅ Why this forklift? Looking for a machine that won’t interrupt your operations? ⚙️ This HUBTEX DQ45G is fully serviced and ready to work immediately – no hidden costs. ✔️ comprehensive maintenance (oils, filters, complete inspection) ✔️ condition: as new ✔️ only 1365 operating hours ✔️ new superelastic tyres – no additional investment required Key specifications: 🔹 Capacity: 4500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5000 mm 🔹 Fork positioner: 1250 mm 🔹 Fork length: 1250 mm 🔹 Cabin: full, heated Technical data: 🔹 Year: 2017 🔹 Hours: 1365 MTH 🔹 Weight: 6940 kg 🔹 Load center: 600 mm Dcedpjzqff Rjfx Ah Dek Mast & Lifting 🔹 Duplex mast 🔹 Lift height: 5000 mm Dimensions 🔹 Height: 2600 mm 🔹 Length: 2500 mm 🔹 Width: 2250 mm Chassis 🔹 New superelastic tyres (100%) Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Complete lighting package Condition ✔️ Technical: 5/5 ✔️ Visual: as new Perfect for: 🏭 narrow aisles 🌲 timber / steel industry 📦 long load handling 🌍 indoor & outdoor use What you get ✔️ fully inspected and tested forklift ✔️ ready for immediate use ✔️ online presentation available ✔️ delivery to your premises Delivery & Service 🚛 Europe-wide delivery 📦 complete logistics support 💼 leasing solutions 🔧 after-sales support Why FT LOGISTICS? ✔️ 100+ machines available from stock ✔️ in-house service team ✔️ experience across Europe ✔️ trusted by a wide range of clients