Generator, generator, generator energije

Pramac GDW 65 P FS3A

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Make: PRAMAC GDW 65 P FS3A Sound pressure at 7 m dB(A): 62 Sound power level LWA dB(A): 91 Continuous output: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: Perkins 1104D-44TG3 Emission stage: IIIA (approved for stationary use only!) Cooling system: Water-cooled Cylinders: 4 in-line Displacement: 4400 cm³ Aspiration: Turbocharged Speed: 1500 rpm Engine control: Mechanical Fuel consumption at 3/4 load: 11.73 liters Fuel consumption at full load: 15.81 liters Fuel tank capacity: 300 liters (steel tank) Generator: MeccAlte ECP32 2M4 C Type: Brushless Number of poles: 4 Regulation: Electronic (AVR control) Digital control: ACP ComAp IL3 AMF25 3-pole generator circuit breaker Terminal block Dimensions and Weight: Length: 2400 mm Hnedpsq A U Amefx Adkoi Width: 1040 mm Height: 1745 mm Weight (dry): 1220 kg Forklift pockets accessible from two sides Oil drip pan Lifting eyes for crane Manual battery master switch Engine pre-heating Manual engine oil extraction pump 3-way valve with bayonet quick coupling

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.470 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 230 l, barva: bež, moč: 27,21 kW (37,00 KM), Izhodni tok: 47 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 17 kW (23,11 KM), nazivna (navidezna) moč: 22 kVA, neprekinjena moč: 20 kW (27,19 KM), neprekinjena (navidezna) moč: 20 kVA, skupna dolžina: 2.800 mm, skupna širina: 1.063 mm, skupna višina: 1.703 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Cummins, vrsta hlajenja: voda, AVS Diesel Generator Set DW 20 CU 15 AK14A PRP Power Output: 16 kW / 20 kVA ESP Power Output: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Level: - Speed: 1,500 rpm Mechanical governor Operating Voltage: 12 V Cooling: water-cooled Alternator: Stamford PI114D Voltage: 400/231 V Control Panel: InteliLite AMF Type: Canopy design; weatherproof, sound-attenuated • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that, according to current EU regulations, these generator sets are not approved for mobile use. Hsdpfjwu D Unjx Adkoni These units are sold as B-grade goods. B-grade means the generators may have cosmetic imperfections such as minor surface rust or rust on the housing. However, these defects in no way affect the functionality or performance of the units. By accepting this offer, you explicitly acknowledge the described characteristics and the associated condition of the generator sets.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Brand: Pramac GWB 22 Y CDS Soundproof Canopy: 64 dB(A) at 7m Continuous Power Output: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Yanmar 4TNV88 BIPGE Emission Standard: STAGE V Cooling System: Water-cooled Cylinders: 4 in-line Displacement: 2190 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Engine Regulation: Mechanical Electric Start Hodpfx Adeq A U Axekoni Fuel Consumption at 3/4 Load: 3.87 litres/hour Fuel Consumption at Full Load: 5.17 litres/hour Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR) Manual Control Panel: - Key Start - Voltmeter, Ammeter, Hour Meter - Engine Fault Indicator Sockets: - 1 x Schuko 220V - 2 x CEE 16A - 230V - 1 x CEE 16A - 400V - 1 x CEE 32A - 400V Dimensions: Length: 1645 mm Width: 870 mm Height: 1072 mm Tank Capacity: 51 litres Weight: approx. 560 kg Lifting Eye Forklift Pockets

Stanje: rabljeno, New Diesel Generator Set, Power Generator, Emergency Power Unit DAEWOO Model DAGFS 100 Brand new, unused Rated Power Output: 100 kVA Continuous Power Output: max. 80 kVA Standby Power: 110 kVA / 88 kW Rated Current: 33 Amps Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel Consumption: 135-liter tank capacity provides up to 8 hours runtime at 75% load Fuel Consumption at 75% load: approx. 16 liters/hour Fuel Consumption in standby mode: approx. 7 liters/hour Drive Engine: Diesel inline engine RICARDO type R6105AZD Engine Power at 1500 rpm: 100 kW Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for safe and easy transport - 3x CEE 16A socket outlets (3-pin, 230 V) - 1x CEE 32A socket outlet (5-pin, 400 V) - Terminals for cable connection to external consumers, e.g., site distribution board - ATS module for mains backup operation with automatic changeover in case of power failure - 2 x 12 Volt starter batteries for 24 Volt starter motor Hnsdpfx Ajx Srv Iodkoi Required space (L x W x H): 2700 x 1050 x 1430 mm Weight: 1400 kg Brand new unit from stock

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes Hjdpfxjwka Ups Adkeni - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage

Stanje: novo, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29689491504001, Only 2 units left for sale! With ignition system, complete set The system includes a high-performance wood gas engine coupled with a generator for efficient power generation. Designed for stationary use, it is ideally suited for industrial applications, combined heat and power plants (CHP), or emergency power supply. Hjdpfxsxxk Tpo Adksni MAN inline 6-cylinder engine with generator: - Robust construction for continuous operation - Optimized combustion for natural gas or biogas Directly coupled to the engine - High efficiency for maximum energy yield - Designed for three-phase power generation Electronic ignition for precise control - High reliability even under demanding conditions Performance: as per type certificate Voltage: 400 V, 50 Hz Control system: Integrated engine and generator management High efficiency and long service life Service-friendly design Adaptable for various gas types Condition: The item was briefly installed but never put into operation. Therefore, it is as new and fully functional.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: zelen, skupna masa: 1.200 kg, obratovalna teža: 1.600 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, Leto izdelave: 2025, številka stroja/vozila: RH16, Oprema: dodatne luči, hidravlika, kabina, RHINO MOTORS RH16 is the ideal mini excavator for construction and landscaping projects. Operating weight: 1.6 tonnes Bucket capacity: 0.03 m³ Combining compact dimensions with powerful performance in a closed cab. Extremely stable and easy to manoeuvre, even on challenging terrain. Various models available from 1.2t to 4.5t. Hnjdpfx Ajw El Rrsdkoi

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), Renault Turbo 150 kVA Generator Set – Made in France – Year of manufacture: 2007 Hnodpfoivt Insx Adksi – Enclosed canopy TECHNICAL SPECIFICATIONS: Fuel: Diesel Engine: MOT-482 Alternator: Unelec Engine power: 120 kW Max generator output: 150 kVA Liquid-cooled engine Turbocharged Transport dimensions (L/W/H): 310 / 150 / 245 cm Weight: 2,000 kg

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 105 h, vrsta goriva: dizel, moč: 70 kW (95,17 KM), skupna dolžina: 2.800 mm, skupna širina: 1.400 mm, skupna višina: 1.950 mm, Lastna teža: 1.350 kg Hnsdjyiltkspfx Adkoi

Leto izdelave: 2023, stanje: novo, * Year of manufacture: 2023 (new unit) * Prime power (PRP): 32 kVA / 26 kW * Rated standby power (ESP): 33 kVA / 26 kW * Rated voltage: 400V * Rated frequency: 50Hz Hjdpfx Ael Iyyuodksni * With terminal strip (without external sockets) * Dimensions: 2,225 x 970 x 1,185 mm (L x W x H) - Weight without fuel: 137 kg