Pp-Tec 3000M nakup rabljenega (10.031)

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety relief): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions (L/W/H): approx. 1900mm/1600mm/400mm. Documentation available. An on-site inspection is possible. The machine is unused and in its original packaging. Hfedpouwrwujfx Adrjh

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2014, skupna masa: 1.500 kg, skupna višina: 4.500 mm, skupna dolžina: 10.000 mm, skupna širina: 5.000 mm, nosilnost: 350 kg, FEINAUER - FRAMATECH LH PP 350 S 70 KBK-naprava s sesalnim dvigalom, rabljeno Hfedpjzakwxofx Adroh Proizvajalec: FRAMATECH in FEINAUER, Sestavljeno iz vodilne tirnice dolžine pribl. 10 m, prečnik s sesalnim dvigalom FRAMATECH LH PP 350 S 70, letnik 2014, Serijska številka 20145040/4, nosilnost maks. 350 kg, vrtljivo, 4 sesalne ploščice, delovni hod skupaj pribl. 10000 x 5000 mm Leto izdelave 2014 Stroj smo leta 2024 kupili na dražbi podjetja Surplex ob stečaju podjetja Lechner v Rothenburgu. Zaradi reorganizacije podjetja pa stroj ni bil nikoli nameščen. Stroj je razstavljen in shranjen v našem skladišču. Prodaja v stanju, kot je bil kupljen na dražbi, brez dodatnega tehničnega pregleda. V primeru vprašanj ali potrebe po dodatnih informacijah nam pišite ali nas pokličite.

Stanje: novo, največja dovoljena obremenitev: 30.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.303 mm, Leto izdelave: 2026, Oprema: ABS, Popolnoma nov D-Tec Flexliner aluminijasti kiper 57 m³ s 3 osmi D-TEC Flexliner FL-3-S aluminijast * 3 osi * SAF osi * Kolutne zavore * Zračno vzmetenje * Samodejna dvižna os * Wabco EBS * Prostornina 57 m³ * Aluminijasta keson * 7 mm obrabno odporna aluminijasta tla * Notranje mere cca 10.300 x 2.480 x 2.303 mm * Naklon kipanja cca 45–46° * Črna drsna ponjava * Pnevmatsko zaklepana kombinirana zadnja vrata * 2 zadnja drsnika * LED osvetlitev * LED delovne luči * Orodjarna Hedjy Nuqispfx Adrjfh * Merilnik obremenitve pri nakladanju * Sistem za nadzor tlaka v pnevmatikah (RDKS) * Nosilec za metlo/lopato * Pristopna lestev * Jekleni platišči * Pnevmatske gume 385/65 R22.5 * Barva kesona: RAL 7001 srebrno siva * Okvir: RAL 7016 antracitno siv * Kratkoročno na voljo * Pridržujemo si pravico do napak in vmesne prodaje. Za vprašanja smo vam vedno na voljo.

Stanje: rabljeno, največja dovoljena obremenitev: 28.360 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, prostornina tovornega prostora: 57 m³, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, D-Tec FL-3-S jekleni prekucni polpriklopnik 57 m³ ? Dolžina tovornega prostora: 11.516 mm Hsdjyzvf Espfx Adrofh ? Višina: 3900 mm ? Širina: 2550 mm ? Dovoljena skupna masa: 36.000 kg ? Lastna masa: 7640 kg ? SAF osi s kolutnimi zavorami ? 385/65 R22.5 ? ABS ? Aluminijasta platišča ? Aluminijaste podporne noge ? Zračno vzmetenje ? Zagozde za kolesa ? 1. os dvižna os ? Stranska zaščita odprta ? Zrnat izpust ? A ščit ? Plastična orodjarna ? Delovni podest ? Ponjava na rolo 680 g/m² ? 5x držalo za ponjavo ? Večkomorni žarometi (standard) ? 4x delovne luči ? LED označevalne luči z utripanjem ? Akustični opozorilec za vzvratno vožnjo Za več informacij smo vam na voljo.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, skupna dolžina: 1.200 mm, leto zadnje generalne obnove: 2025, skupna širina: 500 mm, skupna višina: 1.050 mm, Certificirano po DGUV do: 06/2027, širina transportnega traku: 300 mm, vhodna frekvenca: 50 Hz, Oprema: šasija, bm TEC zložljiv trak za transport testa Širina traku: 300 mm Hitrost traku brezstopenjsko nastavljiva Izvedba iz nerjavečega jekla Preizkušeno po standardu DGUV V3 samo pri nas Mere pribl.: 1200 x 500 x 1050 mm (ŠxGxV) Priključitev: 230 V Hsdey Ik Alspfx Adrsfh Rabljena oprema, očiščena in preverjena pri SAB Veliko drugih pekarskih strojev na zalogi!

Leto izdelave: 2007, stanje: rabljeno, Pulsna plazemska nitrirna naprava, proizvajalec PLATEG Plasma Technik Grün, tip PulsPlasma PP 800, 2000 x 2900, Mono s pripravo za tandem, št. naprave A 5811, z 1 plazemskim generatorjem, tip PP 800/160, št. AN 7491, letnik 2006/2007, izhodna napetost 600 V, pulzni tok 800 A, pulzna moč 480 kVA, priključna moč 190 kW, procesno krmiljenje, tip Stange 510, Hfjdeyazhzjpfx Adreh nerjaveča vakuumska komora Ø 2000 mm (uporabni volumen 1800 mm), višina 2900 mm (uporabna višina 2200 mm), debelina stene 10 mm, teža polnitve 7.500 kg, procesna temperatura max. 600 °C, vakuumska črpalka, proizvajalec Leybold, 13 kW, 2.000 m³/h, DN 160, s tlačnim senzorjem in manometrom, oskrba s plinom, hladenje z vodo z notranjim obtokom, gabariti: 7.840 mm x 3.470 mm x ca. 7.400 mm (višina), s krmilno omaro vklj. 2 hladilni enoti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: Eurotec Dimensions LxWxH (mm): Outer: 600 x 400 x 120 / Inner: 570 x 370 x 100 Weight (kg) approx.: 1.86 each Quantity in stock: 2,600 units Hedpfxoicz A Aj Adrjfh Made in: Germany Comments: Used but in good condition, previously used for frozen goods.

Stanje: novo, lastna masa: 6.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.250 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.220 mm, prostornina tovornega prostora: 15 m³, skupna dolžina: 2.550 mm, skupna širina: 2.870 mm, skupna višina: 7.580 mm, vzmetenje: zrak, velikost pnevmatike: 600/55 R26.5, velikost sprednje pnevmatike: 600/55 R26.5, velikost zadnje pnevmatike: 600/55 R26.5, gradbena višina: 2.880 mm, Oprema: registracija tovornjaka, zavorni sistem na stisnjen zrak, | FARMTECH GRAVIS 2000 težki prekucni priklopnik | FAD osi s nihajnim agregatom in bobnastimi zavorami (ADR zavorne osi) | HARDOX® jeklo spodaj / ob strani 8 mm / 6 mm | Nakladalne mere/nadgradnja: 5250 x 2300 mm | Kroglična vlečna kljuka K80 | Nihajna zavora za hidravlično zadnjo stranico, nastavljiv kot kipanja | Pnevmatske gume: 600/55 R26.5 | Novo vozilo. Prodaja samo pravnim osebam. Pridržujemo si pravico do napak in predhodne prodaje. | Nihajni agregat za vozila v izjemno zahtevnih delovnih okoljih in na posebej zahtevnem terenu! | ADR zavorne osi so posebej zasnovane za naletne zavorne sisteme in ponujajo cenovno ugodno ter okolju prijazno rešitev. Primerne so za priklopnike do skupne dovoljene mase 8.000 kg in jih je mogoče kombinirati z različnimi zavornimi sistemi. Hsdpfx Aeygw Dfjdrefh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, CMS Tecnocut Milestone S 2040 Rabljeno – Letnik 2019 – Zelo dobro stanje Pomiki osi: Os X: 4.250 mm Os Y: 2.000 mm Os Z: 350 mm Oprema: - 2x 3-osna rezalna glava - Merjenje višine vklj. s protitričnim nadzorom - Programska oprema IGEMS - Avtomatsko odstranjevanje mulja prek izpirnega sistema - Abrazivni rezervoar Big Bag in samodejno doziranje abraziva Hedpszdbrnefx Adrofh Vključno z montažo, usposabljanjem, servisom

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: 0-306-04-2737, delovna širina: 800 mm, dolžina transportnega traku: 4.800 mm, hitrost pomika os X: 37 m/min, delovna višina: 1.400 mm, delovna dolžina: 2.300 mm, Nižja cena ni določena - zagotovljena prodaja najvišjemu ponudniku! Prevzem stroja mora biti opravljen med 10. 06. 26 in 30. 06. 26! TEHNIČNI PODATKI Maksimalna širina obdelovanca: 800 mm Maksimalna dolžina obdelovanca: 2.300 mm Maksimalna višina obdelovanca: 1.400 mm Maksimalna podajalna hitrost: 37 m/min PODROBNOSTI O STROJU Dolžina stroja: 4.800 mm OPREMA Dovajalni transportni trak Odvajalni transportni trak Hfedpfx Asy Uwmqodrjh Stroj se prodaja in dobavi v dejanskem in pravnem stanju ("kot viden in všečen") na podlagi fotodokumentacije ter tehnično/komercialnih dokumentov opisnega značaja. Kupec ima pravico izdelek pred prevzemom pregledati in prevzema odgovornost za montažo, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 8536

Stanje: rabljeno, največja dovoljena obremenitev: 1.995 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 300 mm, skupna širina: 1.569 mm, skupna višina: 642 mm, Rear tipper, manufacturer Unsinn, model WEB HK 2715-26-13, Gross weight: 2,600 kg, high loader, open box, overrun braked, rear tipper with hand pump. • Unique torsion-resistant longitudinal beam chassis for safe driving characteristics • Double-walled anodised aluminium side boards Hodpfxoyn Uhws Adrjfh • All side boards foldable and removable • Removable steel corner posts • Insertion options on all 4 corners for tarpaulin frames, mesh or board extensions, or front wall height extension • Recessed long lever locks • 3 mm hot-dip galvanised solid steel floor – extremely robust • Drawbar and frame made of welded hollow profiles, fully hot-dip galvanised by immersion • Numerous cross members for high point load capacity • All cross and longitudinal members flush with the floor • 6 foldable lashing recesses, recessed into the floor frame profile (600 daN/kg) • 6 lashing eyes under the loading floor • Solid 3-stage hydraulic cylinder • Manual hydraulic pump • Maintenance-free ALKO rubber suspension axles • Automatic reversing system • ALKO overrun device and parking brake • 13-pin connector • Reversing spotlight • Large safety lighting • Integrated rear fog lamp • Rear frame lighting recessed • Centrally mounted jockey wheel with clamping bracket Errors and interim sale reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 2.123 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, prva registracija: 08/2022, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 350 mm, skupna širina: 1.647 mm, skupna višina: 748 mm, Leto izdelave: 2022, A37 GW26N0159988, Hfedpfx Aeyn Uc Ujdrsh Zadnji prekucnik proizvajalec Unsinn, tip UHK 2627-14-1500, tandem os, skupna dovoljena masa 2.600 kg, visokonakladalnik, naletna zavora, 100 km/h, aluminijaste stranice, akumulatorska črpalka brez ročne črpalke. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 2.000 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 2.675 mm, širina tovornega prostora: 1.515 mm, višina nakladalnega prostora: 30 mm, Skupna teža: 2.600 kg, visokonakladalna prikolica, odprta keson, vztrajnostna zavora, zadnji kiper s črpalko na akumulatorski vijačnik. Nakladalna višina: 700 mm. Pridržujemo si pravico do napak in vmesne prodaje. Hedpeym Ih Uofx Adrofh

Stanje: rabljeno, največja dovoljena obremenitev: 1.995 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 300 mm, skupna širina: 1.569 mm, skupna višina: 1.029 mm, Skupna teža: 2.600 kg, visoki nakladalnik, odprta kesonska nadgradnja, naletna zavora, zadnji prekucnik z ročno črpalko. Pravica do sprememb in vmesne prodaje pridržana. Hfodpeym Ig Djfx Adrsh

Stanje: rabljeno, največja dovoljena obremenitev: 930 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 01/2023, dolžina tovornega prostora: 2.300 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 300 mm, skupna širina: 1.560 mm, skupna višina: 895 mm, Skupna dovoljena masa: 1.300 kg, visokonaložni priklopnik, z inercijsko zavoro, 100 km/h, zadnji prekucnik, z akumulatorsko črpalko BAST-Ing PumpFast. Pridržujemo si pravico do napak in predčasne prodaje. Hfjdpfxoym Ig Ro Adroh

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Hodpfxsgl Nlmo Adrofh Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Hjdpsgfm Ryjfx Adrefh Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force Hedpfx Adsffh Atorjfh - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: dober (rabljeno), Leto izdelave: 2019, Volumenski merilnik vključno z merjenjem teže za zajem osnovnih podatkov, Bosche – rabljeno - : Cena iz skladišča: 8.500 € (neto)! Proizvajalec: Bosche Wägetechnik Tip: zippcube Naj bi bila velikost M Serijska številka: Z201900158 Leto izdelave: naj bi bilo 2019 Maks. 50 kg 16-20 V/DC Lastna teža tehtnice: 110 kg Z zaslonom HMI 12 Kombinirano merjenje volumna in teže v enem prehodu Idealno za zajem osnovnih podatkov z merjenjem potrebnega prostora Nova cena: cca 20.000 € (neto) zippcube M | Merjenje volumna in teže do 50 kg. Robusten dizajn, precizne tehtalne celice in intuitivna programska oprema za učinkovito logistiko. Stanje: dobro Na voljo: takoj Lokacija: Biberach Hfjdpfx Ajxqffdjdreh

Stanje: rabljeno, Stroj za spenjanje Proizvajalec: Technopack Tipper Tie Izdelan iz nerjavečega jekla in trpežne industrijske plastike Enostavno čiščenje zahvaljujoč gladkim površinam Dimenzije stroja: Širina: 100 cm Globina: 78 cm Višina: 180 cm Moč: 0,1 kW Napetost: 2,5 A Stisnjen zrak: 4–6 bar / 0,4–0,6 MPa Hsdpfx Ajy Iwnnsdrofh

Stanje: dober (rabljeno), Leto izdelave: 2021, Naprodaj je stroj za montažo zank za kemične svinčnike (pen loop) na ovitke beležk, koledarjev, knjig. Stroj italijanskega podjetja Prontotec. Hfjdpfettavlox Adreh

Stanje: novo, The FPW extraction table is suitable for all types of contaminants (metal, plastic, stone, wood, glue vapour, etc.) thanks to a wide range of filters. Dust, vapours, or fumes are no longer inhaled, as they are immediately extracted through the work surface. The down-draft tables are available in various sizes and configurations. All you need is a power socket, plug & play! FPW Extraction Table Construction: - Industrial-grade design - Robust welded filter housing made from 2 mm sheet steel - Work surface made from 3 mm sheet steel, perforated, diameter 4 mm - Powder coating in RAL 7035 (light grey) Premium Model Equipment: - Filters: labyrinth & H14 HEPA (Filter type and technical setup depend on the materials being processed. The extraction table can be equipped to meet all common requirements.) - Increased table load capacity: 500 kg - Rubber supports - Enclosure - LED workspace lighting - Castors for mobile use Available Filters: Hjdpfxjwqcz Ss Adrjfh D – Welding & similar Soldering and similar, generally ferrous materials, excluding hazardous welding fumes K – Grinding & similar Grinding, sanding, fettling, plasma, generally ferrous materials P – Welding + HEPA Welding and similar processes with hazardous fumes Specifications: - Capacity: 3,000 m³/h - Power: 0.86 kW - Extraction area: 1210 x 656 mm - Table dimensions (WxHxD): 2000 x 840 x 985 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 3.100 h, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 234 kW (318,15 KM), vrsta hlajenja: zrak, Datatech/Swegon zračno hlajen hladilni agregat Hladilna moč: 234 kW, 1 krog z vijačnim kompresorjem, frekvenčno krmiljen R1234ze (GWP< 1) cevni izmenjevalnik toplote Preizkušen, pripravljen za obratovanje, le 3100 obratovalnih ur Hfodpfx Ajy E N Unsdrjh

Stanje: zelo dobro (rabljeno), Tip: Clipper Tipper Tie Popolnoma izdelan iz nerjavečega jekla in trpežne industrijske plastike Enostavno čiščenje zaradi gladkih površin Naklonjene površine za izboljšano odtekanje vode S-clip na kolutih S-clip: S 625, S 628, S 632, S 638 Dimenzije stroja: Širina: 100 cm Globina: 78 cm Višina: 180 cm Priključna moč: 0,1 kW Zaščitna varovalka: 2,5 A Hfjdpfxjfiwpgs Adroh Stisnjen zrak: 4–6 bar / 0,4–0,6 MPa Dobava: 1 delovni dan po prejemu plačila

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodgripper WG1600 5-Finger Grab / incl. saw unit / incl. infinitely rotatable tiltator / NEW machine / in stock & immediately available - Grab opening (mm): 1,800 - Own weight (basic – fully equipped) (kg): 530 – 1,190 - Recommended oil flow (l/min.): 60 – 190 - Recommended operating pressure (bar): 100 – 300 - Carrier vehicle service weight, rigid (t): 12 – 22 - Carrier vehicle service weight, oscillating (t): 12 – 22 Equipment: - incl. infinitely rotatable tiltator incl. 30° mounting bracket - incl. saw unit, .404 version with grease lubrication - Electro-hydraulic switching between grab and saw unit We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we offer a wide selection of various Westtech products ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Upon request, we will also be pleased to provide a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. Hfjdpsyxvhujfx Adroh We are an official Iveco sales and service partner. Moreover, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker range! Subject to prior sale and errors! = More information = New: Yes Part suitable for: Application in forestry Please contact Marius Herden for further information.