Pokolm Hsl 4 nakup rabljenega (59.838)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, premer vpenjanja: 16 mm, največja hitrost vrtenja: 40.000 obr/min, Brez izklicne cene – zagotovljena prodaja najvišji ponudbi! Ponudba vas zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! Klsdpfxeynipvs Al Njr TEHNIČNI PODATKI Premer ohišja vretena: 126 / 105 mm Število vrtljajev: do 40.000 vrt/min Frekvenca: do 1.333 Hz Pretok hladilne tekočine: 0,8 l/min Orodni priključek: HSK 40 C Vpenjalni premer: do 12 mm (maks. 16 mm) PODROBNOSTI STROJA Vrhunska moč: 6 kW Obratovalna napetost: 380 V Nazivni tok: 10,5 A Dimenzije in teža Dimenzije (D x Š x V): 720 x 512 x 510 mm Teža stroja: 100 kg Zunanja referenca: Lot 5 / Učna delavnica

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Transportni trak EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA Naprodaj je visokokakovostni transportni trak z naslednjimi tehničnimi podatki: Širina: 800 mm Tip: EP 630/4 Poliester/poliamid ojačitve Natezna trdnost: 630 N/mm 4 plasti ojačitev Pokrovni sloj: 5 mm zgoraj / 2 mm spodaj Kakovost gume: 15 MPa (industrijski standard, odporen na obrabo) Material: PE/PA Stanje: Novo / neuporabljeno Dolžina: 40 m Področja uporabe Idealno za uporabo v: kamnolomih in peskokopih reciklažnih obratih kmetijstvu industriji in transportni tehniki na splošno Prednosti Visoka natezna trdnost Vzdržljivi pokrovni sloji Dobra odpornost proti obrabi Primeren za srednje do težje transportne naloge Kjdpfx Ajxy Nt Rol Nolr

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 51 kW (69,34 KM), vrsta goriva: dizel, lastna masa: 8.400 kg, Leto izdelave: 2019, obratovalne ure: 1.643 h, vrsta pogona: Diesel, Mini excavator Condition: Ready for operation and fully functional Ksdpjy Dytxefx Al Njlr Technical condition: very good Description: TAKEUCHI TB 290-2 tracked excavator - - SWING BOOM - - Year 2019 - - 1,643 operating hours - - hydraulic quick coupler - - MARTIN-POWERTILT - - 3 trenching buckets: 30cm + 60cm + 90cm - - 1 ditch cleaning bucket 150cm - - 4-cylinder Yanmar TURBO diesel engine 51.6 kW (70 hp) - - AIR CONDITIONING - - Rearview camera - - Refueling pump - - Long dipper arm - - Excavator in very good condition - - Rubber tracks approx. 80% - - Inspection and test digging welcome on site - - Affordable delivery options!!! Quick coupler, bucket, 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heating, full cab, air conditioning, CE certificate,

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 3.500 kg, dvižna višina: 14.000 mm, Leto izdelave: 2007, obratovalne ure: 5.700 h, TELESKOPSKI MANIPULATOR Manitou MT 1435 HSL Turbo Leto 2007 Dvižna višina 14 metrov Nosilnost 3.500 kg Kljdpfx Aljyy R Npj Ner 5700 delovnih ur Dizelski motor Urejen dokumentacija

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, številka stroja/vozila: 20345, najv. debelina pločevine: 10 mm, delovna dolžina: 4.000 mm, TEHNIČNI PODATKI Maks. debelina pločevine: 10 mm Delovna dolžina: 4.000 mm PODATKI O STROJU Napetost: 380 V 50 Hz Kjdjylv Itspfx Al Nslr OPREMA Električni zadnji prislon

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Ksdpfek Unitex Al Nolr Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l

Stanje: novo, barva: bela, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 18 m³, dolžina tovornega prostora: 5.700 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.400 mm, Leto izdelave: 2011, Vehicle location: Bovenden. Kjdpfx Aevhknisl Nelr Body: For MAN and Mercedes-Benz 4-axle chassis from approx. 4,200 mm wheelbase, approx. 18.3 m³. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, Rabljene 4-metrske škarje za pločevino Haco Kedpex D Uvrsfx Al Nolr Tip: HSL 4010 Kapaciteta: 4100 x 10 mm Električni zadnji prislon Leto izdelave: 2005

Stanje: dober (rabljeno), Rehsler TW HL4006D hladilna naprava Napetost: 400 V Nazivna moč: 11 kW Poraba toka: 18 A Klodoxg Hmnspfx Al Nor Stopnja zaščite: IP54 Dovoljeni delovni tlak: 10 bar Minimalna okoljska temperatura: 5º C Maksimalna okoljska temperatura: 43º C Financiranje preko naše banke je prav tako mogoče. komplett-konzept.leasingo.de Druge artikle – nove in rabljene – najdete v naši trgovini! Stroški mednarodne dostave na zahtevo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RAD 864/900 - AB49038, hladilna zmogljivost: 1.113 kW (1.513,26 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 8.449 kg, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 21 °C, volumenski pretok: 192 m³/h, tlak črpalke: 3,27 letvica, skupna širina: 2.124 mm, skupna dolžina: 6.600 mm, skupna višina: 3.180 mm, trajanje garancije: 12 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process cooling tower, air-cooled Type: Cooling tower RAD 864/900 Cooling tower by MTA S.p.A. - Rehsler RAD are complete compact water cooling towers, designed for outdoor installation. Includes pump, water treatment system for biocide and stabilizer, as well as control and switch cabinet. Cooling capacity: 1113 kW Chilled water temp. outlet/inlet (°C): 27 / 32 Volumetric flow rate (m³/h): 192 Available pump head (bar): 3.27 Wet bulb temperature (°C): 21 Air flow rate (m³/h): 97,200 Sound pressure level at 10 m, free field (dB(A)): 64 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. current consumption (A): 125 Max. power consumption (kW): 86.6 Dimensions: Length (mm): 6600, Width (mm): 2424, Height (mm): 3180 Weight transport / operation (kg): 4194 / 8449 Connection: DN 150 Ref: AB 9038 Year of manufacture: 2024 Condition: Visual grade 1, technically OK & tested Pilot plant, near-new condition Klsdpfxowmb T Es Al Nor Price: on request in EUR (plus VAT, ex works Nettetal) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm Kodpfxsx Hllxo Al Nslr - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: rabljeno, prevoženi kilometri: 372.928 km, moč: 330 kW (448,67 KM), prva registracija: 06/2022, vrsta goriva: dizel, največja dovoljena obremenitev: 15.875 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.900 mm, barva: drugo, voznikova kabina: drugo, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 7.820 mm, Leto izdelave: 2022, Oprema: klimatska naprava, navigacijski sistem, parkirni grelec, računalnik na krovu, tempomat, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is stated, this is based on the current daily exchange rate. The currency applicable is that of the vehicle’s location. Engine: OM471, inline 6-cylinder, 12.8 l, 330 kW (449 hp), 2200 Nm, High Performance Engine Brake, Predictive Powertrain Control Klodpfeyiv Tdox Al Nsr Front axle: air suspension Trailing axle: 7.5 t, unloadable, liftable, air suspension Rear axle: tire pressure monitoring Fuel tank: 630 l, aluminium Cab: L-cab, cab width 2.50 m, StreamSpace, adjustable air deflector, MirrorCam, central locking system, comfort lock system Driver’s cab: roll control assist, comfort upper bed, wide, levelable, refrigerator in drawer under bed, electric stationary air-conditioning, automatic climate control, auxiliary hot water heater, comfort air-suspended driver's seat, rain sensor, automatic high/low beam and cornering light, headlamp cleaning system Safety: Lane Keeping Assist, Adaptive Cruise Control (distance assist), Attention Assist, Traffic Sign Assist, airbag (driver), cruise control, navigation system Chassis: - Frame height: 1,120 mm - Coupling height: 1,300 mm - Height-adjustable twistlocks front & rear, adjusting range: 120 mm - Coupling height: 1,400 mm “MAX” (twistlocks on top) - Trailer coupling manufacturer: Ringfeder, type: C50-X Tachograph: DTCO 4.0

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Kljdpfsy Dg N Tox Al Nor Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm Kljdjd Tbbdopfx Al Nor - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. Kjdjfdkb Tspfx Al Njlr When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Kodpfx Alsd Tqals Njlr Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level. Kljdpfjfdkb Uox Al Njr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards Kledpfxsguk A Hj Al Nsr - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: Klsdpsfdkbhsfx Al Ner - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Klodpfeguk Dkjx Al Nsr - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version Kljdpfx Ajguk Dvol Njr - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Klodpeyz Iccofx Al Ner Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Kledevphf Ujpfx Al Nor

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Klodpfx Asy Ehnajl Njr Konstrukcija je na kolesih za lažje premikanje.