Panalytical Rentgenski Difraktometer (Xrd) nakup rabljenega (40)

Stanje: rabljeno, PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Created on: 07/07/2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of the goniometer and other components - Maintenance performed, including replacement of defective parts Kdsdpfjwycatjx Acwsl Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY, NI-CD FAN FOR X-CELERATOR UNIT FAN FILTER, WATER Motor PW3050 (“Device was not tested in-house”) The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) for structural characterization of crystalline materials. It is ideal for both pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for routine analyses as well as complex in-situ experiments. Key features: Multiple measurement geometries: - Reflection in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructures Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition Modular system with PreFIX technology: - Fast exchange of optics and sample stages without recalibration In-situ measurements at high temperatures: - Measurements possible up to approx. 1200°C - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing conditions) Typical applications: - Phase analysis and quantitative Rietveld evaluation - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles, pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical): Property / Specification Angle range (2θ): approx. 0.5° to 150° Step width: up to 0.002° or finer Goniometer: Vertical, θ–θ, radius approx. 240 mm Temperature range: Room temperature up to approx. 1200 °C Atmosphere: Air, N₂, O₂ (limited reducing) Detectors: X’Celerator (1D), proportional counter Distribution & usage locations: The X’Pert PRO MPD is deployed worldwide, for example at: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g. Max Planck Institutes, ICN2, IS2M) - Industry (e.g. materials development, pharma, chemicals) Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data. Specifications are subject to confirmation!) We are happy to answer any questions you may have by phone.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Mastersizer Hydro 2000S The analyzer has been serviced annually. Condition: very good. Ready for operation. Technical data: Particle size analyzer for liquids, model Malvern Mastersizer 2000 with Hydro 2000S module. The Hydro 2000S module can circulate between 50 ml and 150 ml of liquid. Variable pump/mixer speeds allow suspension and circulation of particles of different sizes and densities, while the variable-power ultrasonic system enables efficient dispersion of particle agglomerates. The Mastersizer 2000 measures particle sizes in a sample and displays their distribution on a computer in the form of a graph. Measurement is performed as particles pass between the detector array and the laser. Hydro 2000S technical specifications: Voltage: 220-240 V, 50-60 Hz Power: 240 VA Maximum particle size: 600 µm Mastersizer 2000 technical specifications: Voltage: 240 V, 50-60 Hz Power: 60 VA Particle size range: 0.02 µm to 2000 µm Lasers: Red: gas laser, wavelength 633 nm Blue: LED, wavelength 466 nm Kodpfx Acsx Niiyowsdl This product consists of two separate units: Mastersizer 2000, Hydro 2000S. Software included. Mastersizer external dimensions (W x D x H): 133 x 30 x 40 cm Hydro 2000S external dimensions (W x D x H): 34 x 35 x 34 cm

Leto izdelave: 2023, stanje: rabljeno, Proizvajalec: Sesotec Model: Raycon D+ HX 1400 / 660 / 450 / 250 Kdedpfx Acsy Abcrowjl Leto: 2023 Tip: Rentgenski detektor – rentgenski inšpekcijski sistemi za živila Največja širina izdelka: 450 mm Največja višina izdelka: 250 mm Širina traku: 660 mm Detekcija: 0,4 mm Kapaciteta: 900 kosov/min Hitrost v = 0,32 - 1,04 m/s Rentgenski vir: 40–100 kV / 2,0–5,0 mA (200 W) Teža: 585 kg Teža/trak: 111 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: nefunkcionalno, Rentgenski stroj Ishida model IX-G2-4027-H z izmetnim sistemom, letnik 2014. Ksdpfsy Tl Erjx Acwodl

Stanje: rabljeno, Leto izdelave: 1980, Prodajam rentgen za meso SELO, model št. 316-3, Kdedpfx Asy Hh Uvocwjl NYL-RAY Corporation, leto izdelave 1980, ZDA Serijska št. 1202; 220 V; 1,0 A; 50 Hz; Neto cena 900 evrov Cena po dogovoru

Stanje: rabljeno, Gulmay CP225-1/29 X-Ray Radiography Device Irradiation Unit Maximum output: 3200 W kV range: 20 – 225 kV kV accuracy: ± 1% of specified value kV repeatability: Better than ± 0.05 kV High-voltage ripple: Less than 5.0 V/mA with 10M high voltage cable mA range: 0 – 30 mA mA accuracy: ± 0.5% of specified value mA repeatability: Better than 2μA Kedpfx Acsy Akczjwedl Input voltage: 220 V ±10% 47–63 Hz Input current: 27 A at 220 V Output connector: R30 Cathode dimensions (W x H x D): 435 x 780 x 818 mm Storage temperature: -40°C to +70°C Operating temperature: 0°C to +40°C Relative humidity: 95% Duty cycle: 100% Communications: Analog / RS232 / RS422 You are welcome to arrange a viewing appointment. We are happy to organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be provided, subject to a valid VAT ID number. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Stanje: rabljeno, Leto izdelave: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in production environments within the food, beverage, and pharmaceutical industries. The system is primarily used for foreign object detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the device also supports product integrity checks, such as detecting missing components or assessing product consistency. The system features a robust stainless steel construction, making it suitable for industrial environments with stringent hygiene requirements. The inspection process is based on X-ray imaging, with products conveyed through the inspection chamber on a conveyor belt. The system analyses density differences in real time and automatically activates a rejection mechanism when contamination is detected. Technical Data Construction: Stainless steel frame for hygienic industrial use HMI: Integrated touchscreen for operation, calibration, and product changeover Electrical data Power supply: 230 V AC, single phase Current: 11.0 A Frequency: 50 / 60 Hz Inspection Function Detection of foreign bodies: - Metal - Glass - Stones - High-density plastics Additional functions: Kedpfx Asyzc D Uocwsdl - Product integrity verification - Detection of missing components - Density-based inspection

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2009 DRx, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, X-ray product inspection device Kdjdpfx Acjw Eklzjwsl

Leto izdelave: 2008, obratovalne ure: 470 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Yxlon MU 2000, Yxlon MU 2000 Typ Industrie-Röntgenprüfanlage mit 160 kV Ausgangsleistung: Die Anlage wurde 2020 komplett generalüberholt. Das Flachdetektorpanel sowie sämtliche Achsantriebs-Elektromotoren wurden ebenfalls ersetzt! Das Bleiglas-Beobachtungsfenster mit Sicherheitsverriegelung lässt sich beidhändig öffnen, sodass Werkstücke ohne Unterbrechung der Strahlenquelle eingelegt werden können! Die Werkstücke lassen sich mittels eines Fünf-Achsen-Manipulators positionieren. Die Bewegungsabläufe sind programmierbar, was den Arbeitsprozess beschleunigt und die Auswertung präziser macht. Eine manuelle Verstellung zur Inspektion ist ebenfalls möglich! Werkstückgröße und -gewicht: - Durchmesser: 400 mm - Länge: 900 mm - Gewicht: 60 kg Kabinenmaße: 2200 x 2700 x 1800 mm Gewicht: 4000 kg Computersteuerung Die Maschine positioniert den Prüftisch sowie Neigungswinkel und Höhe des C-Arms automatisch gemäß dem auf Basis der zu prüfenden Bereiche erstellten Programm. Dadurch kann die Anzahl der pro Serienprüfung testbaren Teile signifikant gesteigert werden. Mehrere Bauteile können gleichzeitig in die Kabine geladen werden und werden nacheinander, nach Programmierung, inspiziert. Ksdsu Hzvxspfx Acwedl MG 165 Röntgengerät Y.TU-160 D 06 Metall-Keramik-Röntgenröhre zur Detektion kleinster Fehler in Stahl- oder Aluminiumguss sowie -teilen - Fokusgröße: 1,0/0,4 mm - Prüfspg.: 8–160 kV, Leistung 1,00/0,64 kW - Geschlossenes Wasserkühlsystem WL3002 - Durchstrahlbare Materialstärke: Stahl 35 mm, Aluminium 45 mm XRD Flachdetektor - Aktive Fläche: 200 x 200 mm - 512 x 512/400 μm/30 fps oder 1024 x 1024 Pixel/200 μm/15 fps Auflösung - Spezielle Framegrabberkarte - Y.T24.CD01, 24″, 1920×1200 Pixel, Farb-TFT-Monitor - Belastbarkeit: 160 kV Steuerpult: - MGC 41 Steuerpult - Manipulatorsteuerung (Joystick) - Türsteuerung, Drucktasten (beidhändig) - Steuerung der Bildverarbeitung - Digitale Bildverarbeitungssoftware - Bildarchivierung - Bildbeschriftung - Bildvergleich mit Referenzbild - Zoomfunktion - Schwarzblendensteuerung - Leistungsstarke Grafikkarte + Framegrabber + Auswerte-PC - Mess- und Kalibrierfunktionen - Windows-Betriebssystem - DICONDE-Datenformat

Stanje: dober (rabljeno), Safeline ADV4 rentgenski stroj, 2011, nerjaveče jeklo, rentgenski stroj, odprtina 400mm x 200mm, izmet s potisno roko v zaboj, 3-fazni. Kdsdpfxoyw Tdwe Acwsl

Stanje: skoraj kot novo (rabljeno), Rentgenski stroj Ishida je v odličnem stanju. Skoraj ni bil uporabljen. Prihaja neposredno od velikega proizvajalca hrane. Ksdpfx Acsy A Rh Rjwedl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P.0020001424, Rentgenska naprava Yxlon International MU231 – popolnoma funkcionalna (2003) Popolnoma avtomatski, 100-odstotni rentgenski pregled aluminijastih platišč z uporabo YXLON-ovega programa Y.AI/Rel.9 ADR omogoča čas cikla pod 25 sekund na platišče. Avtomatsko zaznavanje napak. Popolnoma funkcionalen rentgen za alu platišča. Primerna za alu platišča v velikostih od 12 do 19 col. Stroj je popolnoma delujoč, v odličnem stanju. V letu 2025 je bila opravljena popolna generalna obnova – vse napake so bile odpravljene (preverjeno v praksi). Programska oprema je odklenjena. Novi lastnik lahko napravo preizkusi pred nakupom (osrednja Češka). Na stroju je pripeta originalna identifikacijska tablica. Cena: 49.000 EUR brez DDV (cena ne vključuje prevoza in dajatev) Račun izda češko podjetje, zaračunan v EUR. Za dodatna vprašanja nas kontaktirajte – e-mail / WhatsApp / klic Vključeno: - Kabina iz svinca (1) z manipulatorji/shuttle-i (2) za transport platišč v/iz kabine - Dekolatorji za ločevanje posameznih platišč ob vnosu v kabino - Rentgenska cev (3), ojačevalec slike (4), visokonapetostni generator, rentgenska krmilna enota (5) - Industrijski PC (6) (z nastavitvami mehanskih pozicij in rentgenskih parametrov za vsako vrsto platišča) - Krmilna omara s PLC krmilnikom (7) - Manipulator za platišča (8) (rotacija in linearno premikanje platišč) - Rentgenski manipulator (9) (nagibna os z rentgensko cevjo in ojačevalcem slike) Kjdpex Hqnrjfx Acwsdl - Vizijski sistem za prepoznavanje vrste platišča - Enota za obdelavo slik (osnovni in podrejeni računalniki) - Odtokovni transporter (10) npr. z izbirnim preklopnikom (za ustrezna platišča / zavrnjena)

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), A like-new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed for 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed for 5kg to 10kg: 10m-40m/min. Housing material: stainless steel. Machine weight: approx. 255kg. Operating hours: less than 50h. The machine shows no wear on the conveyor belt or on the radiation protection curtains. Documentation is available. An on-site inspection is possible. Kdodevzr Aujpfx Acwol

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je rentgenski inšpekcijski aparat Mekitec za živilsko industrijo. Tip merilne naprave: Rad Eye B20, največja moč: 60kV/1,66mA/100W, postopek: kontrola v liniji, testirani objekt: pakirana živila, prehod skozi predor X/Y: cca 250mm/100mm, dolžina traku: 1200mm, širina traku: 250mm, največja hitrost traku: 1,3m/s, največja teža izdelka: 5kg, dimenzije stroja X/Y/Z: cca 2000mm/550mm/1200mm, teža: cca 100kg. Dokumentacija na voljo. Možen ogled na lokaciji. Kdsdpfsxnp Scjx Acwjl

Stanje: skoraj kot novo (rabljeno), Rentgenski sistem AdvanChek (ADV 3) za pregled pakiranih živil in farmacevtskih izdelkov/materialov. Kjdpfx Acoyufdcjwedl Rentgensko skeniranje za zaznavanje kontaminiranih tujih teles kot so kovine, steklo, kamni, kosti, keramika, določene plastike in gume itd. Vgradnja z eno linijo z odprtino: 360 mm x 200 mm višina (vhod in izhod). Hitrost transporterja: 10 – 60 m/min (odvisno od dimenzij izdelka). Zaslon: kapacitivni zaslon na dotik 10,1" (razmerje stranic 16:9). Prikaz rentgenskih žarkov: velikost diode 300 mm ali 400 mm – 0,4 mm ali 0,8 mm.

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10003426, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Kodpoyfgzkofx Acwjdl For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Leto izdelave: 2026, stanje: novo, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. Ksdpfxoymfmzs Acwjdl X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (in some cases 1.3 M pixel report depending on configuration) Field of View 65 × 65 mm up to ~130 × 130 mm Image resolution ~5.8 Lp/mm Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample/size ~280 × 320 mm Net weight approx. 750 kg Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic multi-point inspection. ✔ Infrared automatic navigation and positioning. ✔ Generation of inspection reports. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. The unit was removed from a laboratory and is offered solely as a donor for spare parts or for repair purposes. No functionality test has been performed – therefore, the device is considered defective for the purpose of this sale. Technical Specifications – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Kdjdpfx Acehaapfswsl Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, materials analysis, precious metal testing Measurement Geometry Top-down or bottom-up irradiation, depending on configuration Radiation Source X-ray tube (e.g., Rhodium anode), 50–100 W output Detector Proportional counter or Silicon Drift Detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size Approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H) Approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System Optical / Laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Power Supply 220–240 V / 50–60 Hz / approx. 500–800 W Device Weight Approx. 150–200 kg (depending on configuration) Condition: Used / Defective / For Spare Parts Scope of Delivery: As shown in the images – no accessories or software included Important Notes: This item is expressly sold as a defective unit with no functional guarantee. The product is offered as a parts donor or for repair projects. No guarantee for functionality, completeness, or technical specifications. Commercial sale excluding any liability for material defects, pursuant to § 447 BGB (shipment purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the photos - No additional parts, accessories, or documentation included unless explicitly listed. Shipping & Collection: - Collection in Borken possible and preferred - Shipping can be arranged upon request. (Changes and errors in the technical data and information reserved!) For further questions, please feel free to contact us by phone.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6418411, Leto izdelave: 2016, obratovalne ure: 204 h, nosilnost: 1.200 kg, dvižna višina: 1.810 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.850 mm, dolžina vilic: 1.200 mm, vrsta pogona: Elektro, High-lift stacker Chassis number: 6418411 Mast type: Standard Condition: Ready for use and fully functional Technical Condition: Good Description: Toyota SPE 120 XRD No.: R0574 Year of manufacture: 2016 Operating hours: 204 The machine is in good visual and technical condition. Fast and straightforward transport possible upon arrangement! This advertisement is for identification of the machine only! A detailed description of the condition and possible features will be provided individually upon request! Subject to errors and prior sale, sale exclusively to business customers. Every sale of used goods is carried out with exclusion of warranty and/or guarantee. If you did not find your required forklift, please contact us. We have a large selection of further machines available on site. Kdjdpswm Svqjfx Acwjl

Leto izdelave: 2025, stanje: novo, X-ray inspection system for medium-sized packs and pouches. Suitable for the detection of foreign objects such as metal, glass, stone, plastic, etc., in food or non-food products. Ksdpfsv Nm Inex Acwedl Specifications: Conveyor belt width: 410 mm; Detection sensitivity: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic (e.g. stone, glass) from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; Detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; Conveyor belt height: 850 ± 30 mm; Conveyor belt speed (product-dependent): 10–100 m/min; User interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5–35 °C; Ejection system: optionally available as required; Power supply: 220VAC, 50/60Hz; System dimensions: L900 x W920 x H1825 mm; Weight: 350 kg. Please note that our new prices are often below conventional used prices. Feel free to send us an enquiry and describe your specific packaging application. We typically have 30–50 different new machines available ex stock for immediate delivery. For custom-built equipment, we offer very short lead times, starting from approximately 3 weeks. All machines are supplied with a full warranty.

Leto izdelave: 2025, stanje: novo, X-ray inspection system specifically designed for tin cans, plastic containers, and jars. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc., in food or non-food items. Specifications: - Conveyor belt width: 200 mm - Detection sensitivity: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone and glass from Ø 1.2 mm - X-ray power: 150 kVp, 7.5 mA - Detector resolution: 0.4 mm - X-ray emissions: < 1 µSv/h - X-ray beam: vertical scanning - Conveyor belt height: 900 ± 30 mm - Conveyor speed (product-dependent): 10 – 60 m/min - User interface: 15" touchscreen - Software: intellisens®X-ray Kdodjv Nm I Uopfx Acwjl - Operating temperature: 5–35 °C - Ejection system: available optionally as per requirements - Power supply: 220VAC, 50/60Hz - System dimensions: L2000 x W1300 x H2060 mm - Weight: 650 kg Please note that our new prices are often lower than standard used equipment prices. Feel free to contact us and let us know your packaging requirements. We always have 30–50 different new machines in stock for immediate delivery. For customized machines, we offer very short lead times starting from approx. 3 weeks. All machines are available with a full warranty.

Leto izdelave: 2025, stanje: novo, X-ray inspection system specially designed for glass bottles. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: Conveyor belt width: 85 mm; Detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray power: 150 kVp, 7.5 mA; Detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; Conveyor belt height: 1100 ± 30 mm; Conveyor speed (product-dependent): 10 – 100 m/min; Operating interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5 – 35 °C; Rejection system: optionally available according to requirements; Power: 220VAC, 50/60Hz; System dimensions: L3500xW1300xH1795 mm; Weight: 700 kg. Kdsdpfx Acjv Nm Nfjwol Please note that our new prices are often lower than usual used equipment prices. Feel free to contact us and let us know your packaging requirements. - We always have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, X-ray inspection system designed for trays, cartons, and large bags. Suitable for detecting foreign bodies made of metal, glass, stone, plastic, etc., in food or non-food products. - Specifications: Conveyor belt width: 600 mm; Detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray power: 150 kVp, 7.5 mA; Detector resolution: 0.4 mm; X-ray emissions: < 1 µSv/h; X-ray beam: horizontal scanning; Conveyor height: 750 ± 30 mm; Conveyor speed (depending on product): 10 – 60 m/min; Operator interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5 – 35 °C; Ejection system: optionally available according to requirements; Power supply: 220VAC, 50/60Hz; System dimensions: L1800xW1300xH1900 mm; Weight: 580 kg. Kdedpfxsv Nm Izj Acwel Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging application. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, X-ray detector for food and other products (such as medical, chemical, textile) in packaging (non-metallic or metallic packaging, including cans), including safety unit. Kdjdpfxov Nm H De Acwjl - Specifications: * Detection speed: 0.09–0.46 m/sec * Detection accuracy: FE from Ø 0.8 mm, SUS from Ø 0.8 mm * Tunnel size (W×H): 230×120 mm * Max. product size (W×H): 230×120 mm * Power supply: 220V/1kW * Dimensions and weight: L1230×W795×H1600 mm, 800/900 kg Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know about your packaging requirements. We usually have 30–50 different new machines available from stock at any time. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, X-ray inspection system for medium-sized packages and pouches. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. Kdodpfxov Nm Ius Acwsl - Specifications: Conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass from Ø 1.2 mm; X-ray power: 80 kVp, 7 mA; detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (product-dependent): 10 – 100 m/min; user interface: 15" touchscreen; software: intellisens® X-ray; operating temperature: 5 – 35 °C; reject system: available optionally as per requirements; power supply: 220 VAC, 50/60 Hz; system dimensions: L900xW920xH1825 mm; weight: 350 kg. Please note that our new prices are often below typical used machine prices. Feel free to inquire and let us know your packaging application. We usually have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. All machines are available with full warranty.