Naprava Za Vtiskovanje Keramičnih Čepov nakup rabljenega (85.687)

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Press-in device for ceramic pins in rotor shafts Operating principle: The ceramic pins are fed via a vibratory bowl feeder through a pneumatic hose to an inspection station, where the position of any possible single-sided hole is checked. This is done using an optical sensor. Incorrectly positioned parts are separated out into a collection bin by a pneumatic slide. Correctly oriented pins are conveyed via another pneumatic hose to the singulator of the pressing tool. The actual press-in process is also pneumatic, using a stamp guided by a roller bearing punch. First, a manually adjustable pressure p1 is used to ensure the pin is not pressed too easily into the shaft. A second, also manually adjustable pressure p2 then presses the pin into the rotor shaft up to the limit stop. A disc spring package with a preload of 5,000 N prevents excessive force from being applied to the pin and shaft. The rotor shaft must be manually loaded, removed, and clamped into the tool by the operator. This process is safeguarded by a light curtain. Construction Self-supporting station, integrated into the complete system, for pressing in ceramic pins and balls. Rotor shafts: Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin: Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle: Performance: 15 strokes per minute Safety: Protective door with safety switch Category 4 light curtain Emergency stop Airborne noise emission: Continuous sound pressure at the workstation: 70 dB(A) Electrical connection: Pgedpfx Agjib H U Dexek Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed air supply: Operating pressure: 5 - 7 bar Dimensions: L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically height-adjustable work table Documentation and circuit diagrams available.

Stanje: zelo dobro (rabljeno), Ponujamo vam: Pedpfx Aow Ra Hqsgxjgk Orodje za vtiskovanje za ustvarjanje oblikovne zveze Proizvajalec: HWR Tip: SOLIDStamp Prikazani dodatki, orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Za uporabo na rezkalnih strojih z enostavno montažo na mizo stroja. Nastavljiv kotni prislon 30–150°. Drsni voziček teče gladko po krogličnih ležajih. Dolžina osnovne plošče: 1000 mm Drsna dolžina: 710 mm Dimenzije drsne plošče: 295 x 255 mm Pjdpfx Agjymlivoxogk Vgradna višina cca 56 mm

Stanje: novo, Leto izdelave: 2025, Advantages of pre-glued dowels: • No additional glue required when shooting in the dowel • No cleaning effort for the water supply system Advantages of the DübelJet: • Recoil-free gun • Easy handling • Mobile handheld device • Universal application range Technical data for the DübelJet: • Doweling system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) Pjdpewu Dnnefx Agxsgk • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) • Universal application range • Shooting in pre-glued dowels (with water) especially in furniture production • Shooting in position dowels (without water) made from wood or plastic, for example in frame construction or in conjunction with screws or carcass connectors

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, minimalna gramatura papirja: 40 g/m², največja gramatura papirja: 300 g/m², Hunkeler RW 6 TECHNICAL SPECIFICATIONS Paper Weight (Standard): 40–300 g/m² Paper Weight with Edge or Center Slitting: 50–120 g/m² Roll Width: min. 165 mm Roll Width: max. 520.7 mm Roll Diameter: max. 1,370 mm Roll Diameter with Edge or Center Slitting: 1,300 mm Edge Trim Width: 8–40 mm Roll Weight: max. 800 kg Speed: 10–100 m/min Speed with Edge or Center Slitting: 10–90 m/min Note on Speed: > 150 m/min from a minimum roll diameter of 200 mm MACHINE DETAILS Rated Current: 7 A Active Power: 1.1 kW Apparent Power: 1.5 kVA Ambient Temperature: 10 °C to 32 °C Relative Humidity: 15% to 85% Optimum Room Temperature as per Paper Specification: 18 °C to 24 °C Optimum Relative Humidity as per Paper Specification: 40% to 60% Weight: 694 kg Hunkeler UW 6 TECHNICAL SPECIFICATIONS Paper Weight: 40–300 g/m² Roll Width: min. 165 mm Roll Width: max. 521 mm Roll Diameter: max. 1,370 mm Roll Weight: max. 800 kg Speed: 10–100 m/min Rated Current: 4 A Active Power: 720 W Apparent Power: 950 VA Ambient Temperature: 10 °C to 32 °C Relative Humidity: 15% to 85% Optimum Ambient Temperature as per Paper Specification: 18 °C to 24 °C Optimum Relative Humidity as per Paper Specification: 40% to 60% Weight: 648 kg Hunkeler RW 6 Vacuum Buffer Pgodpfx Agjyzppdsxjk TECHNICAL SPECIFICATIONS Web Width: min. 165 mm Web Width: max. 521 mm Paper Weight: 50–180 g/m² MACHINE DETAILS Ambient Temperature: 10 °C to 32 °C Relative Humidity: 15% to 85% Optimum Ambient Temperature as per Paper Specification: 18 °C to 24 °C Optimum Relative Humidity as per Paper Specification: 40% to 60% GENERAL FEATURES Configured for online integration with OCE Variostream 8650 roll-fed printer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100281518, skupna višina: 2.260 mm, skupna širina: 1.550 mm, skupna dolžina: 1.685 mm, višina izdelka (maks.): 310 mm, največja širina izdelka: 150 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Nova cena je znašala več kot 100.000 EUR! Naprava je pripravljena za nakladanje in transportno zapakirana! Pgedey Ath Hepfx Agxjk Nakladanje lahko prevzame prodajalec. TEHNIČNE PODROBNOSTI Maks. širina za pregled: 150 mm Maks. višina za pregled: 310 mm Transportni sistem Tip transporterja: Vrtljiva miza Hitrost: 12 – 45 m/min PODROBNOSTI O STROJU Rentgenski generator Napetost: 30 – 75 kV Tok: 1 – 8 mA Moč: maks. 300 W Dimenzije (D x Š x V): 1.685 x 1.550 x 2.260 mm Zaščitni razred: IP65 / IP66 Električni podatki Napajanje: 200 – 240 V Frekvenca: 50 / 60 Hz OPREMA Vrtljivomizni transporter Hermetično zračno hlajenje Rentgenski inšpekcijski sistem

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna masa: 220 kg, skupna dolžina: 610 mm, skupna višina: 2.000 mm, skupna širina: 805 mm, vhodna napetost: 400 V, višina krmilne omare: 2.000 mm, dolžina elektro omare: 610 mm, širina krmilne omare: 805 mm, vhodna frekvenca: 50 Hz, krmilna napetost: 230 V, vrsta zaščite (IP koda): IP20, We are offering this used Eskap ESR-7000 (-S485) power factor correction system, 100 kvar, year of manufacture 2022. Ready-to-connect, regulated power factor correction system for automatic reactive power compensation, ESKAP modular design according to IEC / DIN EN 61439-1 and -2, IEC / DIN EN 60831 and -2, and DIN EN 61921. Rated voltage: 230 / 400 Volt, 50 Hz. Podpfx Aeyiryysgxsgk Rated output: 100 kvar; step output: 25 kvar. Step configuration: 2 x 25 - 50 kvar, expandable up to max. 200 kvar in the same cabinet. Modules spaced approx. 100mm apart. Contactors equipped with leading-edge resistor contacts for inrush current damping. Group protection via NH fuse-switch disconnectors. MKP three-phase capacitors with discharge resistors, UN = 525 Volt. 7% detuned for protection from load control frequencies > 228 Hz. Reactors with high linearity and temperature monitoring. Temperature class T40/B, insulation class F. 4-quadrant controller with 12-step self-adaption. Ventilation via ball-bearing roof fans. Permissible ambient temperature: -10°C to +35°C (24h average), up to +40°C (short-term peak). ESKAP floor-standing cabinet: 2000x805x610 mm (HxWxD). Protection class 1, IP20, colour: RAL 7035. Cable entry from below, door hinge right, approx. weight 220 kg. If you have any questions or need further information, please feel free to send us a message or give us a call.

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenski rezkar s 4 glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Pgedpfxox Hwmbs Agxjk Mere: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton

Stanje: rabljeno, Wastewater treatment plant. Includes: - Mixing and equalization tank 1, 140 m³ Podpfx Agjvcql Rsxogk - Mixing and equalization tank 2, 40 m³ - Mixing and equalization tank 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 compressed air compressors for reactor aeration - Secondary clarifier 1, 100 m³ - Secondary clarifier 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering units 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps Machine details (Additional information): Years of manufacture: 1992 - 2018 Bioreactor volume: 2 x 240 m³ Operation / Control: Siemens Simatic S7 Equipment: Mixing and equalization tanks 1, 2 & 3; Pump station 1 – Bioreactor inlet; Pump station 2 – Bioreactor inlet; Bioreactor 1; Bioreactor 2; Pump station – Bioreactor outlet; 2 x compressed air compressors; Precipitant tank fill point cabinet; 2 x preparation station; Secondary clarifiers 1 & 2; Sludge tank 1; Mixing tank; 2 x sludge dewatering units; Sludge tank 2

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Pgedpfx Ageyqr Sxsxsk

Stanje: rabljeno, natančni koti in poševni rezi od 0° do 46°, z digitalnim prikazom kota Pedpfjwhzg Ujx Agxegk Lokacija: Nattheim

Stanje: dober (rabljeno), Soldering device for carbide-tipped saw blades VISCAT model BC500 Podpfx Aoigv Ebjgxjgk

Stanje: rabljeno, Leto izdelave: 2013, Premer izvrtine, mm Število vodoravnih vrtalnih glav, kos Število navpičnih vrtalnih glav, kos 2 kosa Götzinger vrtalno-rezalnega centra ----- Prodaja po naročilu stranke! 2 enaki stroji: En stroj uporabljen za "leve" dele, drugi za "desne" dele. Stroje je možno uporabljati tudi posamezno. Stroje je upravljala programska oprema za izdelavo oken, lahko pa jih upravljate tudi preko lastne programske opreme stroja. Podev N N Spopfx Agxsgk Oba stroja imata enako opremo: - Vrtalni agregat levo in desno za čelne izvrtine. - 3 agregate za vrtanje in rezkanje vzdolžnih obdelav. - Obdelovanci se vložijo le enkrat, nosilec agregata izvede različne operacije. Namestitvena dolžina posameznega stroja cca 6 m. Možna posamezna prodaja: Cena na stroj: 10.000 EUR Več informacij v priloženih PDF-jih.

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Tehnični podatki: Pomik v X/Z: 100/500 mm Vpenjalna površina: 600 x 450 mm Križna miza (X/Y): 100/50 mm Pgedey Dy A Topfx Agxek Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Contracer: C-3200 Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Oprema in tehnični podatki: - 2-čeljustna vrtalna glava za steblo do 20 mm premera - Pnevmatska nastavitev položaja na 2 nivojih 0-100 mm - Največja globina vrtanja 150 mm - Precizna rastrovna letvica 12 mm - Centrirna aretacija in prečna nastavitev - 2 pnevmatska varnostna vpenjalna cilindra - Motor 1,5 kW - Število obratov 2800 obr/min Dimenzije (brez prislona): 1100 x 1100 x 1500 mm Pjdpfx Aewkba Hsgxegk Teža: pribl. 310 kg Dobavljivost: takoj Lokacija skladišča: Röllbach

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Oprema in tehnični podatki: Vpenjalna glava z 2 čeljustmi do Ø 20 mm stebla Pnevmatska nastavitev pozicije na 2 nivojih 0-100 mm Maks. globina vrtanja: 150 mm Precizna zobata letev 12 mm Sredinska zapora in prečno nastavljanje. 2 pnevmatska varnostna vpenjalna valja Motor 1,5 kW Št. vrtljajev: 2800 o/min Nastavljiva enota za podolgovate izvrtine z 2 programskima ekscentroma Psdpew I Uy Tsfx Agxsgk Teža stroja ca. 310 kg Velikost stroja (ŠxGxV) 1100 x 1100 x 1500 mm (brez prislona) Razpoložljivost: hitro dobavljivo Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 1997, Rabljeni stroj Letnik: 1997 Stanje: vzdrževan Oprema in tehnični podatki: - Število vrtalnih vreten: 21 kosov v razmiku 32 mm - Smer vrtanja: od spodaj in s čelne strani - Nagib: 0-90 stopinj z ročnim kolesom - Pnevmatski vpenjalci materiala: 3 kosi - Prehod: maksimalno 100 mm v višino in maksimalno 640 mm v širino - Motor: 1,5 kW - Premer odsesovanja: 120 mm - Vključno z različnimi omejilniki (glej slike) Razpoložljivost: takoj Lokacija skladišča: Röllbach Pgsdpfxjxwz Iho Agxsk

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 46131, Površina za vtiskanje s grelno glavo: HKAC maks. 100 x 125 mm // HKBC maks. 140 x 230 mm Pritisk vtiskanja pri 6,5 bar s: 1 valj cca 400 daN (kp) // 2 valja cca 800 daN (kp) Podex I Nfrepfx Agxsgk Hod nastavljiv glede na vir tlaka: 0-40 mm / 0-100 mm Maksimalna višina prehoda brez/z drsno mizo: 300 mm / 275 mm Podajanje folije nastavljivo: 0-230 mm Maksimalna širina folije: 140 mm Napetost gretja: 220 V / 50 Hz Grelna moč z grelno glavo: HKAC 540 W // HKBC 900 W Merjenje temperature s: Fe-Co Maksimalna zmogljivost, taktov na uro: cca 4000

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), številka stroja/vozila: 121, more MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Podoh Eib Espfx Agxsgk

Leto izdelave: 2018, stanje: rabljeno, sestavljen iz: pražilnega ciklona, transporta surove kave, ročnega upravljanja, gorilnika za dim Pgedpfey D Tyxex Agxjk

Stanje: rabljeno, Finiture lakirna linija za okna in vrata ----- Kratek opis: Poz. 1: 1x dvojna obešalna tirnica Poz. 2: 1x vrtljivi sklop za nosilce z eno sklopko Poz. 3: 1x "Superjet" potopna naprava Poz. 4: 1x visokotlačni vlažilec Pgodpfxjy D A Hhe Agxok Poz. 5: 1x naprava za ločevanje odpadne vode Opcijsko: Potopni kanal ali bazen (5–6 kadi) Podroben tehnični opis in načrt — glejte pripeto PDF datoteko! ----- Cena zgoraj navedene lakirne linije na povpraševanje! ----- (Tehnične navedbe po proizvajalcu – brez garancije!) Vse cene so brez DDV. DDV se obračuna posebej.

Stanje: rabljeno, Ta električna naprava za zamrzovanje cevi Richebaecher se prodaja na naši industrijski dražbi / dražbi strojev zaradi čiščenja skladišča podjetja za gradbeno tehniko, ki poteka na spletu. Pgjdpoy Hrf Sofx Agxjk To in številne druge pozicije najdete na naši platformi.

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Pjdpfx Agsv Tb Hgsxogk Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included Pedpfewiwnqox Agxogk

Stanje: pripravljen za uporabo (rabljen), ASYST CNC-naprava za profiliranje in ravnanje Tip: APNC 400 Leto izdelave: 2003 Pjdjy Edc Tepfx Agxsgk Naprava je funkcionalna; kot rezervna ali za nadomestne dele