Naprava za liofilizacijo

Christ Epsilon 2-12 D

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, CHRIST EPSILON 2-12 D Lyofilizator Kdodow Snufjpfx Agfet Ta univerzalno uporabna pilotska naprava s prostornino ledenega kondenzatorja 100 L je zasnovana za liofilizacijo trdnih ali tekočih izdelkov v ampulah, stekleničkah itd. Tehnični podatki: Kapaciteta ledenega kondenzatorja: 12 kg Učinkovitost ledenega kondenzatorja: 8 g/24 h Temperatura ledenega kondenzatorja: -75°C Proizvajalec: Christ Leto izdelave: 2004 Potrebni prostor: 130 x 130 x 200 cm + 180 x 60 x 200 cm

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 21 h, Funkcionalnost: popolnoma funkcionalen, High-Performance Ride-On Scrubber-Dryer Machines in Excellent Condition for Sale! This machine is in exceptionally well-maintained condition and is ready for immediate use. Condition: Used, very good Operating hours: 21h Year of manufacture: 2025 SCHORR SCRUBBER-DRYER 24V FLOOR CLEANER SCRUBBER 100AH SCRUBBING MACHINE Efficient floor cleaning combined with extremely simple operation. Kjdpfx Ajwh Ri Ejgfsdt Restore shine to your facility! The fully electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas significantly easier, particularly due to its outstanding maneuverability. With a steering angle of 90°, obstacles like pillars or narrow passages are no issue. No special training is required to operate the machine—simply fill it up, get on, and start cleaning. Equipped with 100Ah batteries, you can use the machine continuously for approx. 4 hours. The batteries can be conveniently recharged with the included charger from any standard 230V electrical outlet. SCHORR SCRUBBER-DRYER RR1030FS – DISCOVER THE ADVANTAGES: -- Fully electric scrubber-dryer with 1030mm working width – ideal for large halls and areas -- Up to 4500m²/h cleaning capacity -- 80-litre clean water tank and 85-litre dirty water tank -- 510mm brush diameter -- Powerful 24V 100Ah batteries -- Extremely robust and reliable Technical Specifications Manufacturer (Short name): SCHORR Manufacturer model: RR1030FS Drive: Ride-on Vacuum motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tyres: PU (non-slip) Net weight: 250kg Key Dimensions Clean water tank volume: 80l Dirty water tank volume: 85l Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical data available upon request. The ride-on scrubber-dryer is designed with user-friendliness in mind, to make the cleaning process as straightforward as possible. The intuitive control panel enables easy operation of all functions, allowing even inexperienced users to quickly become familiar with it. Thanks to the ergonomic seat and clear view of the cleaning area, you can work comfortably and efficiently. The large 80-litre clean water tank and 85-litre dirty water tank facilitate long cleaning intervals without frequent refilling or emptying. The machine is easy to maneuver and ideally suited for use on large floor areas. Naturally, we keep all spare parts in stock and can supply them quickly should you ever encounter an issue. If you require technical support, we have the necessary technical expertise and can perform repairs in our in-house workshop. The SCHORR team is always available to answer any questions you might have regarding our ride-on scrubber-dryer. You can reach our knowledgeable staff by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Stanje: dober (rabljeno), Leto izdelave: 2014, moč: 14,8 kW (20,12 KM), volumenski pretok: 1,63 m³/h, tlak (maks.): 7,75 letvica, Kompresor zraka Atlas Copco SF 15 FF Proizvajalec: Atlas Copco Tip: SF 15 FF Leto izdelave: 2014 Največji tlak: 7,75 bar Pretok: 4,95 m³/min Volumenski pretok: 27,1 l/s, 1,63 m³/min Moč motorja: 14,8 kW = 20 KM Hitrost motorja: 2885 o/min Teža: 595 kg Napajanje: 400 V, 50 Hz, 3 faze Zasnova: brez olja ISO razred: 8573-1 razred 0 Kedpoxk U Dcjfx Agfedt Oprema: integriran Workplace Air System™, opremljen s SMARTLINK Krmiljenje: Elektronikon Izvor: Izdelano v Belgiji Za pravilnost, popolnost in ažurnost podatkov ne prevzemamo odgovornosti.

Stanje: kot nova (razstavni stroj), obratovalne ure: 50 h, Uhlmann Thermoform Packaging System UPS 4 ETX for processing PVC forming film and aluminum lidding foil Base machine with modular technology and balcony design, consisting of 12 modules: - Forming film unwinding unit with 2 pneumatic expanding shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and splicing table for forming film - Intermittent forming film unwinding - 3-zone contact heater: - 6 heating circuits, individually controllable - simultaneous heating of at least 3 advances - heating plates open automatically when machine stops - Forming station with 4-column lift table guidance - Filling section, length 1,360 mm - Safety cover in filling area Lidding foil unwind on operator side with pneumatic expanding shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4-column lift table guidance: - integrated overload protection - automatic lifting of the upper sealing tool when machine stops - Free module for installation of an additional station - Indexing chain feeder - Punching station with blister lowering - Waste cutter with integrated motor-driven transport of the punching grid - Smoothing device - Perforation station ET/DT - Monitoring of compressed air supply with machine stop if minimum value is not reached - Visio Scan - electrically interlocked safety doors - Fast format change due to: - plug-in format parts - quick-connect couplings for cooling water supply - Main drive with frequency-controlled three-phase geared motor - Control cabinet at machine rear, swing-mounted Operating control Paccontrol - 10.4" TFT color display, resolution 640x480 pixels - Processor 68C030 - Operating system OS9 2.9 - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Programmable logic controller in modular design: - B&R PLC control - Bus system with modules for CPU, inputs, Kdedpfotndpzjx Agfst outputs, temperature controller, cam controller, etc. - external program memory Technical Data UPS 4 ETX: - Cycles: - ET area: min./max.: 15/50 cycles/min. depending on film quality, feeding, and format design - Format range: min./max. advance in filling area: 64/226 mm min./max. film width: 100/300 mm min./max. punching width: 28/284 mm max. forming depth: 12 mm - Compressed air: - Input pressure: approx. 6 – 8 bar 4 Simtap feeders

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Allegedly very little used Plümat BFL 851 automatic filling line for filling and sealing pre-sterilized IV bags under pharmaceutical conditions. The equipment consists of a safety frame, manual bag insertion station, printing station, bag preparation station, tube cutting station, filling station, tube welding station, tube cooling station, and control panel. The filling line is a linear system compliant with GMP and FDA standards. Kdodelhqndepfx Agfet - Bag formats (2 tubes = free tube of 30 mm length sealed with vial stopper and 40 mm welded or open tube): 100 ml, 250 ml, and 500 ml - Filling capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - Filling accuracy: 100 ml = ± 2.0 %, 250 ml = ± 1.0 %, and 500 ml = ± 0.7 % - Dosing range: 100 ml - 1000 ml - Welding method: thermal welding - Filling system: Siemens S7 with flow measurement system and pneumatic filling valve - Control: Siemens S7 MicroBox with Profibus DP and TP 1500 touch panel - Power supply: 5.5 kW, 230/380 V, 50 Hz - Compressed air supply: approx. 700 l/min, min 6 - max 8 bar - Cooling water supply: approx. 4 l/min, temperature 18-21 °C - Weight: approx. 1350 kg (net) and 1750 kg (gross) - Dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Leto izdelave: 2020, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Fabricant BRINOX Désignation de la machine Installation CIP CS6720 Modèle LEP12 – Module CIP avec réservoir tampon isolé de 200 L Année de fabrication 2020 État Neuf, inutilisé, emballage d’origine, jamais installé, jamais mis en service Type d’installation Installation CIP modulaire (Cleaning in Place) sur cadre en acier inoxydable, entièrement prémontée. Composée d’un réservoir tampon CIP isolé, d’une pompe centrifuge, d’un échangeur de chaleur, d’un module de tuyauterie en acier inoxydable, de technologie de vannes, de technologie de mesure et de régulation ainsi que de raccordements pour les fluides. Dimensions du cadre env. 2330 x 1224 x 2127 mm Réservoir tampon Kdjdpfxeyl H Htj Agfet Volume de travail 200 litres Volume total 278 litres Conception cylindrique avec fonds bombés selon DIN 28011 Pression de service -1 à +3 bar Pression d’épreuve 5,4 bar Température admissible -10 °C à +150 °C Température de fonctionnement 0 °C à +85 °C Groupe de fluides 1 Isolation : laine de verre à faible teneur en chlorures (

Leto izdelave: 2020, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, OPIS/LASTNOSTI: Ofsetni tiskarski stroj za nalepke s 5 barvami, opremljen z fleksografsko enoto in rotacijskim nožem za izrezovanje v eni liniji. Kedpfxjzrxdps Agfjdt Stroj je opremljen z: • Enoto za odvijanje • Napravo za vodenje materiala BST • UV LED sušilnikom (5) • Preklopno palico • 5 ofsetnih enot • Fleksografsko enoto • Registracijsko kamero BST • Samodejni čistilni sistem • za valje za barvo • Samodejni sistem za vstavljanje tiskarskih plošč • Polrotacijsko enoto za izrezovanje z magnetnim valjem • Enoto za navijanje z rezanjem (rezila) • (odstranjevanje) • Kontrolno ploščo za barvanje + CIP 3 za samodejno nastavitev barve • Hladilnik barve • Mizo za perforacijo tiskarskih plošč CCD • Samodejna registracija

Stanje: dober (rabljeno), Leto izdelave: 2019, REF: MM6469 Celoten sistem za polnjenje in zapiranje cevi, ki obsega naslednjo opremo: 1 x mešalnik Collette z visoko hitrostjo, z 2 x mešalnima posodama (za serije mešanice 150 kg), črpalko in cevovodom za neposredno dovajanje iz posode v stroj za polnjenje/zapiranje cevi. Kdsdpfjzp E Sbox Agfst 1 x rotacijski stroj za polnjenje in zapiranje cevi Axomatic. Proizvajalec – Axomatic Srl. Tip – AXO 1000 MATIC. Datum proizvodnje – 2019. Hitrost – 60 do 90 cevi/minuto. Opremljen z lijem za polnjenje, selektorjem cevi, detektorjem za odsotne cevi na krožnem nosilcu, napravo za polnjenje, napravo za zapiranje s kodo na zapiralu, stiskalnikom (na vrhu za odpadke) in izhodnim žlebom. Dobavljen z glikolnim hladilnikom Eurocold, črpalko, cevovodom in 2 x paletami cevi. Pri tej napravi so bile zamenjane vse zračne cevi. Prej uporabljena in nastavljena za polnjenje cevi z glazuro, vendar je teža in velikost cevi spremenljiva (10 g do 120 g). Električne zahteve – trifazni tok. Največji tlak zraka – 8 bar. Dimenzije sistema za polnjenje cevi AXO 1000 MATIC – dolžina 2300 mm x širina 1400 mm x višina 2350 mm. Teža sistema za polnjenje cevi AXO 1000 MATIC – 1100 kg.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6723-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-Filling Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling / Process Vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: approx. 610–762 kg Product-contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Identification number: 0036 Ksdpfeykqmzox Agfjdt TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate No.: Z-EU-SI-LJU-20-05-2702107-19125214 Test Report No.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection according to PED Annex I No. 3.2 carried out Pressure test according to Annex I No. 3.2.2 carried out Accepted without deviations Permissible number of load cycles: 10,000 cycles (1.3 bar) Date of acceptance: 20.05.2020 FAT – Factory Acceptance Test Complete factory FAT performed: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional check • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation verification FAT fully documented. CONSTRUCTION • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade welding • Manway DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • Designed for pressure and vacuum operation CONDITION • Never used in production • Factory-tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Comprehensive, structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design inspection • FAT protocols • Material certificates to EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Surface roughness protocols • Internal pressure test reports • Dimensional protocols • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation file available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-end BRINOX pharmaceutical design with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – certified project quality. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.000 l, Oprema: dokumentacija / priročnik, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – Incl. Saddle Support – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial Number: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / Solution Tank / Pharmaceutical Process Vessel Working Volume: 30,000 liters Total Volume: 33,213 liters Product-contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated, and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: • PED 2014/68/EU compliant • CE marking present • GMP-compliant pharmaceutical design Pressure Data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test performed. FAT – Factory Acceptance Test A fully documented FAT carried out, including: • Dimensional, visual and identification check • Weld inspection and NDT • Pressure test according to PED • Testing of all nozzles/connections • Documentation and quality inspection FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Internal surface pickled and passivated • Hygienic, GMP-compliant construction Connections, incl.: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measurement, safety and process connections Mechanical design: • Original BRINOX stainless steel saddle support included • Heavy-duty construction • Lifting points for crane handling available CONDITION • Absolutely new condition • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle support also in new condition and part of scope of delivery. DOCUMENTATION – fully available (GMP-compliant) Comprehensive manufacturer and project documentation incl.: • EU Declaration of Conformity and CE documentation • PED documents • Material certificates EN 10204 – 3.1 • Welding documentation (WPS / WPQR, welder lists) • NDT test reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Partial drawings and parts lists • Operating and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging available • Original industrial packaging • Crane handling possible without issue • Worldwide shipping possible SUITABLE FOR Kodpfx Ajykngfegfedt • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new build project, with complete FAT, PED compliance and GMP documentation. Large-volume BRINOX 30,000 L pharmaceutical process vessel in new plant quality incl. saddle support – immediately available