Naprava Za Ekstrakcijo Čistega Zraka S Stiskalnico Za Briketiranje nakup rabljenega (122.182)

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Suction inlet: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 6,000 m³/h Rated airflow: 5,089 m³/h Negative pressure: 2,587 Pa Filter surface area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting output: 30 - 50 kg/h Briquette diameter: 50 mm Kedpfxeh D If Hs Al Nslr Weight: 1,570 kg This machine is brand new in our stock – IMMEDIATELY AVAILABLE – Subject to prior sale Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 250 P-BP Inlet Diameter: 250 mm Motor Rated Power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Maximum Airflow: 4,900 m³/h Nominal Airflow: 3,534 m³/h Kljdscdr E Ajpfx Al Nsr Vacuum: 2,451 Pa Filter Area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting Capacity: 30 – 50 kg/h Location: Arriving at warehouse 54634 Bitburg Subject to prior sale

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Technical data to follow! Kedpfx Asgny Ryjl Nolr

Stanje: potreben popravila (rabljeno), Odsesalna naprava z briketirnim strojem Nestro Kljdpfx Aexy Agkjl Nor Ni preverjena – potrebna popravila Zaradi tega se prodaja po zelo ugodni ceni. Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: dober (rabljeno), Soldering device for carbide-tipped saw blades VISCAT model BC500 Kljdjigv Ebspfx Al Njr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Felder Clean Air Extraction Unit | Dust Extraction System Ksdpfx Aewa Rlksl Nelr RL 200 | Ø 200 mm Maximum air flow: 4000 m³/h Rated air flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter surface area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput capacity: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil volume: 125 litres Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The system has already been dismantled and is stored at the Raasdorf warehouse.

Stanje: rabljeno, številka stroja/vozila: 128, prevoženi kilometri: 426.650 km, moč: 278 kW (377,97 KM), prva registracija: 01/2013, vrsta goriva: dizel, lastna masa: 12.180 kg, največja dovoljena obremenitev: 13.820 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 r22,5, konfiguracija osi: 6x2, medosna razdalja: 2.700 mm, zavore: VEB (Kombinat državnih podjetij), barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, Oprema: ABS, dodatne luči, hidravlika, klimatska naprava, nadzor oprijema, nizka raven hrupa, spojka prikolice, tempomat, zapora diferenciala, Urea tank (AdBlue) Displacement 10,837 cc EBS (Electronic Braking System) Automatic climate control Gergen TAK-VL Adonis with remote control Sun visor Exhaust discharge upwards Air and electric connections for trailer operation Subject to errors and omissions Kodpfxok Dbn Te Al Nolr

Stanje: rabljeno, številka stroja/vozila: 226, prevoženi kilometri: 397.950 km, moč: 265 kW (360,30 KM), prva registracija: 09/2014, vrsta goriva: dizel, lastna masa: 10.260 kg, največja dovoljena obremenitev: 7.740 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/70 r22,5, konfiguracija osi: 4x2, medosna razdalja: 3.700 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, Oprema: ABS, hidravlika, nadzor oprijema, nizka raven hrupa, spojka prikolice, zapora diferenciala, Urea tank (AdBlue) Displacement: 9,291 cc EBS (Electronic Braking System) Kjdpfx Alek Eag Ij Nslr HyvaLift type NG2014 TAXL Sun visor Subject to errors and omissions

Stanje: rabljeno, Leto izdelave: 2013, Tehnični podatki: - Proizvajalec: Berliner Luft - Leto izdelave: 2013 - Tip: RXL 30 - Priključek na kanal: Sesalni 875x875 mm, Tlačni 875x875 mm - Volumski pretok: 30.000 m³/h - Ogrevalni medij: topla voda PWW 90/70°C - Toplotna moč Q: maks. 344,29 kW - Pretok medija: voda 4,24 m³/h - Premer priključka ogrevalne cevi: 1 cola - Moč motorja: 15 kW - Lokacija: na zalogi - Nihanje napetosti: maks. +/- 5 % - Brez elektro omare Dimenzije: Klsdpfx Aljxgh I He Njr - Dolžina: 5.300 mm - Širina: 2.000 mm - Višina: 1.755 mm

Stanje: novo, Vacomats are mobile extraction units designed to remove large quantities of dust and chips in compact spaces. These clean air extraction systems (negative pressure), intended for indoor installation, can be used for single or multi-machine extraction, handling air volumes of up to 10,000 m³/h. Built in accordance with the latest EU standard EN 16770, they are particularly suitable for woodworking shops where special safety requirements apply due to the risk of dust explosion. They are suitable for materials classified under dust explosion class St1. Filter cleaning in the Vacomat XPe is carried out purely electro-mechanically via an efficient shaking motor, which automatically activates once all connected machines are switched off. The control is managed via voltage-free contacts relaying the operating status of the woodworking machines. Motorized shaking control is included in the scope of delivery. Delivery does not include coils. Motorized filter regeneration, mobile design, extraction port can be mounted on either the right or left side, and the unit can be height-reduced for transport. ----- Technical Data ----- Extraction connection Ø: 180 mm Airflow: 2,610 m³/h Kledpju T Hrisfx Al Nor Rated airflow: 1,832 m³/h Max. negative pressure: 2,450 Pa Filter surface area: 13.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 2 Motor power: 3.0 kW Dimensions (LxWxH): 2,085 x 900 x 2,130 mm Weight: 414 kg Sound pressure level: 76 dB(A) Dust class: M Includes: integrated control cabinet

Stanje: rabljeno, Spot welding tong with DALEX RS 17 controller and balancer Spot welding tong DALEX Type A 3139 Manufacturing No.: 98G 69757 Year of manufacture: 1998 Rated output at 50% duty cycle: 8 kVA Welding power max.: 22.4 kVA Open-circuit voltage: 2.9 Volt Electrode force max.: 200 daN Short-circuit current max.: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6 / 12.5 mm Electrode gap max.: 230 mm - Tong with water cooling - without cooling unit - cooling water requirement: 1.5 liters/min. - Suspension device Balancer DALEX Type D4-21 Weight of welding tong: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS No.: 0413-410 Serial No.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Squeeze, hold, off, and pause times: each 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Kodpsyxrhdefx Al Nelr Pulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter adjustment: via arrow keys - with solenoid valve control - Current setting via phase angle control - Welding controller in sheet metal wall cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 08649020, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe obvezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 bodisi med 18.05.2026 in 21.05.2026! Kljdpfxsyn Eb Uj Al Nsr PODROBNOSTI STROJA Dimenzije in teža Dimenzije (D x Š x V): 500 x 400 x 100 mm Teža: 10 kg Zunanja referenca: Lot 18 / L.Schaible

Stanje: rabljeno, 2 vpenjalni plošči, 1 par vpenjalnih letev s T-utorom Vpenjalni blok, mizna plošča za stiskalnico, dodatna miza s T-utori Dolžina vsake vpenjalne letve: 900 mm Širina vsake vpenjalne letve: 295 mm Debelina vsake vpenjalne letve: 130 mm - 6x T-utorov 30 mm - Razmak T-utorov: 150 mm - 6 vrtin Ø 18 mm (razmak 300 x 160 mm) Klsdpfx Asxf Uwlel Njr - Površine obdelane na vseh straneh Lastna teža vsake vpenjalne letve: 240 kg Lastna teža obeh vpenjalnih letev: 480 kg Dobro stanje

Stanje: rabljeno, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging system Fan Type S 140 / 0 / S1 Serial No. Year of manufacture 12 / 2004 Nominal air flow: 1451 m³/h Negative pressure: 1398 Pa Filter area: 18 m² Extraction connection: Ø 140 mm, reduced to Ø 120 mm Air outlet: 480 x 480 mm Motor power: 1.1 kW Power supply: 400 volts, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning via shaking motor Ksdpsr R Ewljfx Al Nslr - 2 discharge pipes at the bottom for waste collection bags, each Ø 500mm reduced to Ø 300mm - Dry fire extinguishing line with connection for C-hose, fire brigade connection for filter fire - Differential pressure switch for detecting filter contamination - Without control system (no control unit included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as shown in photos: 3050 mm Required space (L x W): 1850 x 1000 mm Weight: approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust, or plastic chips.

Stanje: rabljeno, Tool Presetting Device SOMET Type SPS 500 U Machine No. S1 Year of Manufacture: 1987 Table Surface: 545 x 1000 mm Travel: X = 500 mm, Y = 340 mm Portal Width: 550 mm Height (table to underside of portal): 250 mm - Longitudinal portal guides right and left on the table - Adjustment via precision leadscrews with handwheel - Rapid adjustment via electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping devices for tool measurement included Klsdpfx Aedzqrtel Njr - Mounted on a base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Stanje: rabljeno, Flame Preheating Device Roland Groß + Söhne GmbH Ring Burner for Preheating, e.g. for Weld Seam Preheating, Casting Preheating, etc. Type: 1 x 1" Ionization Serial No.: ALMA Year of manufacture: 03/20 Connection voltage: 230 Volt Max. gas pressure: 500 mbar Max. air pressure: 10 bar Max. gas flow: 30 Nm³/h Max. air flow: 300 Nm³/h Including 10 different flame ring nozzles: - Flame monitoring Hans Henning Klodpfx Aedz Spwsl Nsr - Foldable ring nozzle made of 2 half-shells, inner Ø 310 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 400 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 490 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 500 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 590 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 690 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 690 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 800 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 890 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 890 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 990 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, arc length 1500 mm, with push-fit hose coupling and ignition device, central outlet Suitable for preheating pipes and vessels. For heating steel to welding temperature. Ideal for repair welding and fabrication of welded components made from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Gas-fired heating for thermal coating applications.

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz Kjdpfx Ashbal Dol Njlr - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: rabljeno, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of manufacture: 1993 Tensile force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Minimum measurable value: 20 kg Power supply via 12 Volt battery - Suspension shackle for double hook, anchor hook - Operation, saving of measurement values, and tare via remote control - Storage for measurement values (weights) - Printer for measurement values Very robust and high-quality steel body Kodpfx Ajg D H Risl Nelr Net weight: approx. 200 kg

Stanje: rabljeno, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic chuck: 115 x 115 mm Clamping range: 110 x 75 mm Construction height of magnetic plate: 119 mm Workpiece dimensions (L x W x H): max. 60 x 100 x 50 mm Power consumption: 1 ampere Operating voltage: 24 volts, DC (V/DC) - Mechanically switchable permanent magnet Dimensions (L x W x H): 500 x 200 x 125 mm Weight: 25 kg Kodpfjdz Sqxjx Al Njlr Good condition Suitable for use in cutting tool and die making for tapered, back-ground cutting plates or mold inserts.

Stanje: novo, Leto izdelave: 2026, Cuvette de sablage sous pression 200 l, mobile, pour chantier ou usage stationnaire. Kljdpeynr E Tofx Al Nsr Robinetterie montée en toute sécurité sous la poignée. Très bien adapté aux utilisations intensives sur chantier. Composition : - Réservoir sous pression 200 l - Tamis de préfiltration - Couvercle de protection contre les intempéries - Séparateur d'eau - Détendeur - Réglage de l'air de transport (débit d’air pour la cuve et le tuyau de sablage) - Tuyau de sablage Ø25 mm, 10 m - Buse de sablage Venturi Ø8 mm (consommation d'air à 6 bar env. 3,57 m³/min) - Vanne de mélange d'abrasif, pièce en Y caoutchoutée pour une moindre usure - Filtre à air respirable avec tuyau d'air 10 m - Casque de sablage Systèmes de sécurité : - Interrupteur homme mort avec câble de commande - Dégazage rapide commandé En option : - Poignée agrandie avec support pour tuyau - Tête de sablage humide - Chauffage pour air respirable - Châssis de transport avec seau Hobbock et couvercle pour plusieurs heures de sablage sans remplissage - etc. Fabriqué en Allemagne

Leto izdelave: 2025, stanje: novo, - Plate width 710 mm Ksdpfsh Ramgox Al Nslr - Rear gauge - Adjustable stroke

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvoosna rezkalna naprava s 4 glavami na stran (3 za rezkanje in 1 za brušenje) Klsdpfx Aox Hwmbel Ner

Stanje: rabljeno, Leto izdelave: 2006, barva: svetlo modra, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.560 kg, lastna masa: 3.440 kg, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 7.150 mm, višina nakladalnega prostora: 4.000 mm, prva registracija: 06/2006, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 01/2023, vzmetenje: zrak, velikost pnevmatike: 445/45 r 19,5, medosna razdalja: 5.200 mm, Oprema: ABS, TRAILER FOR TRANSPORT OF SWAP BODIES, MECHANICS AND BODYWORK IN VERY GOOD CONDITION Kljdpfxsm Tdczj Al Ner

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 390 kg, hladilna zmogljivost: 9,5 kW (12,92 KM), Chilled Water Cooling Unit Cooling Capacity: 6 kW Kledow D T T Eopfx Al Njr Weight: 110 kg

Stanje: novo, Leto izdelave: 2025, Bending machines from "Prod-Masz" – CE certified quality! ZGR-2140L/0.8 Bending angle: 160 degrees Klsdpfx Aljb Hxzye Njr Technical specifications: - Maximum working width: 2140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Titanium-zinc sheet 0.8 mm, aluminium sheet 1.2 mm, copper sheet 1.25 mm - Bending angle: max. 160 degrees - Bending beam thickness: 15 mm - Cutting with the rotary shear across the entire working width - Upper beam lift adjustable in three positions - Upper beam stroke: 80 mm - Angle indicator - Weight: approx. 180 kg - The machine complies with CE regulations and comes with a 12-month warranty. - Rotary shear – max. cutting capacity 0.8 mm (steel sheet) additional €350 Price: €1,500.00 Delivery costs: €180.00 Cash payment upon delivery! Delivery: every week Invoices are issued either with 0% VAT as an intra-community supply or with 19% VAT. We look forward to hearing from you!