Microstep Mastercut Eco Plus 3001.15 nakup rabljenega (10.551)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2202, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control: IMSNC Oxyfuel cutting table: 3000 x 1500 mm Extraction duct left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions via soft-switch inverter and microprocessor control • Optimal process management through extremely fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition and power source • Operating status and error indication via LED and display • Analog and serial interface for CNC control integration • Stepless adjustment of cutting current from 10 - 160 A and for marking from 5 - 25 A • Optimal piercing thanks to stepless delay for main arc and adjustable current ramp-up • Adjustable current reduction for corners, start, and end signals of the guidance system • Automatic display of preset cutting current • Serial data transfer for diagnostic purposes on PC Plasma Cutting Technology Contour Cut Cjdpfsy Nd Hyjx Aplsrb • Advancement of HiFocus technology for mild steel • Optimized for cutting fine inner and outer contours • High cut quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 in the range of 2-4 • Minimal angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming reworking – high productivity and low costs • No additional equipment, software, or new consumables needed • Standard equipment Plasma Torch PerCut 200/210 • PerCut 200 plasma machine torch for standard and high-precision bevel cutting • PerCut 210 quick-change torch with threaded lock for fast and convenient fitting • Special torches available for special applications • Higher cutting speeds reduce cost per cut meter • Long service life of consumables saves resources • Narrower kerf, resulting in less emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the nozzle tip • Lower noise level thanks to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking with the same consumables Power Source HiFocus 161i Mains connection: 400 V; 3-phase; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Main fuse, slow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: - Maximum: 50 mm - Recommended: 0.5 – 38 mm Maximum piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Microstep Mastercut Eco Plus 3001.15, Year of manufacture: 2016, Control: IMSNC, Cutting table: 3000 x 1500 mm, Extraction channel left/right, Plasma source: Kjellberg Hi Focus 161i, adjustable 10 - 160 A, Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions through soft-switch inverter and microprocessor control • Optimal process control via rapid regulation of cutting current • Monitoring of process parameters such as torch cooling, ignition time, pilot arc duration, and short-circuit time at torch and power source • Operating status and fault indication via LED and display • Analog and serial interface for connection to CNC controllers • Stepless cutting current adjustment from 10 - 160 A, and for marking 5 - 25 A • Optimal piercing through stepless main arc delay and adjustable current ramping • Adjustable current reduction for corner, start, and end signals from the guiding system • Automatic display of preset cutting current • Serial data transfer for PC diagnostics Plasma Cutting Technology Contour Cut • Advanced HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cut quality and contour accuracy • Holes with angular deviation according to DIN EN ISO 9013 in range 2-4 • Low angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming post-processing – high productivity and low cost • No additional equipment, software or new consumables required • Standard as default Plasma Torch PerCut 200/210 Crsdpfxsyzy S As Aplsb • PerCut 200 plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded cap for fast and convenient setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf reduces emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the tip • Lower noise due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power Source: HiFocus 161i Mains supply: 400 V; 3 Ph; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Line fuse, slow blow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range 50 mm max. 0.5 – 38 mm recommended Max. piercing thickness: 30 mm Weight: 206 kg Plasma torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Stanje: rabljeno, Leto izdelave: 2016, CNC plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Eco (A) Plus Leto izdelave: 2016 CNC upravljanje Delovno območje: 1.500 x 3.000 mm Crjdey Auxmepfx Aplob 1 x plazma z virom energije Kjellberg HiFocus 161i Pripravljeno za naknadno vgradnjo avtogenskega gorilnika Filtrirni sistem Kemper System 8000 s predločevalnikom Program za gnezdenje Asper Basic na CNC krmilniku ä16426

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 38 mm, skupna masa: 3.500 kg, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, TEHNIČNI PODATKI Območje rezanja jekla: 1-38 mm Pomik X-osi: 3.000 mm Crjdpfjx I Ehpjx Aplob Pomik Y-osi: 1.500 mm PODROBNOSTI O STROJU Rezanje medij: HiFocus 161i Krmiljenje: MicroStep Skupna potreba po električni moči: 6 kA Teža stroja: pribl. 3.500 kg OPREMA Plazemski napajalnik Kjellberg HiFocus Plus 161i

Stanje: rabljeno, Leto izdelave: 2024, CNC plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Compact 3001.15P Leto izdelave: 2024 Delovno območje: 1.500 x 3.000 mm 1 x plazemski gorilnik z virom Kjellberg Q1500 in Crjdpfx Aeytqmmepleb avtomatsko plinsko konzolo O² (O², N²) 1 x filtrirni sistem TEKA za zunanjo postavitev 1 x program za gnezdenje na krmilniku stroja Razpoložljivost: takoj

Stanje: rabljeno, Leto izdelave: 2019, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Compact 4001.20Ptk Credpfxsxnmbne Aplsb Letnik izdelave: 2019 CNC krmiljenje Delovno območje: 2 x 4 m Plazemski rotator „MasterCut“ s popolnoma avtomatsko podporo za pripravo varilnih spojev 1 plazemski gorilnik z napajalnikom Kjellberg HiFocus 280i Filtrirna naprava TEKA št. ä5526

Stanje: dober (rabljeno), Leto izdelave: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Exhaust table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical details in detail: 1x oxy-fuel torch (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units mounted on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for direct programming at the machine control Module macro library “AsperWin Select” Module NC simulator “AsperWin NC-Sim” Module “Plasma marking” (for scribing) via plasma source Module “THC” / automatic height control via arc voltage USB 2.0 port for storage media MicroStep® Remote Diagnostics Module “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply lines Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ Credpsudn Rzefx Apleb 1 piece capacitive height control IHT / for oxy-fuel 1 piece electric ignition unit RHÖNA-Acetylen Double-sided rope safety system (collision protection) for the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into the CNC control Module for automatic activation of the marking device

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), A nearly new MicroStep CNC plasma cutting system, including a Hypertherm air plasma power source, nesting software, and Aigner filtration unit, is available. 1) MicroStep MasterCut Compact CNC plasma cutting machine, year of manufacture: 2023, working dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, controller: MicroStep iMSNC, operating hours: approx. 2,588h. 2) Hypertherm Powermax 45 XP plasma cutting and gouging unit, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter unit, weight: approx. 500kg. Documentation is available. On-site inspection is possible. Expected to be available from the end of 2025. Crsdpswn H Udsfx Apljb

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Crodpfxjynmz Ns Aplob Country of origin: Germany Price: €1,781.01 Drilling capacity in structural steel: 10 mm Chuck: B 16 Throat depth: 180 mm Speeds: 250 - 3000 rpm Motor: 0.45 kW Length: 400 mm Width: 248 mm Height: 460 mm Weight: 30 kg Quill stroke: 50 mm Distance spindle - table: 105 - 245 mm Table: 300 x 200 mm Column diameter: 50 mm Continuous/nominal drilling capacity: 10 / 12 mm (in E335/ST60) Manual feed Digital speed display Robust, high-quality and inclined rotary hood for easy speed reading LED lighting Quick-adjust and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push-button Thermal overload protection Undervoltage protection Drill guard with electrical safety interlock Power cable with Schuko plug (1.2 m) 3 years warranty for single-shift operation OPTIONS: Machine cabinet with door and drawer Drilling package 2 (vice & quick-release drill chuck)

Stanje: rabljeno, največja dovoljena obremenitev: 29.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2015, Oprema: ABS, SDP 27, LASI EN 12642 Code XL, 223.613 km Aufbau innen / außen: * Schiebeplane links + rechts * Schnellspanner vorne * Schiebeverdeck * Ladungssicherungszertifikat EN 12642 Code XL * Innenhöhe ca. 2.730 mm * gelochter Außenrahmen (Multilock) * Palettenanschlag links + rechts * Siebdruckboden für 7.100 kg Staplerachslast * 23 Einstecklatten Aluminium * 3 Paar Schieberungen verschiebbar * Heckportaltüren mit doppelten Verschlüssen * Aufstiegsleiter * Staukasten Credjym H I Hopfx Apleb * Rückfahrscheinwerfer * Nebelschlussleuchte Fahrgestell / sonstige Ausstattung: BPW Eco Plus Achsen * Luftfederung * Heben und Senken * ABS, EBS * Bereifung 385/65 R 22,5 * Restprofil ca. 5 - 15 mm ---- Freibleibendes Angebot ab Standort Bocholt, Zwischenverkauf und Irrtümer vorbehalten. Verkauf nur an Gewerbetreibende oder Export.

Stanje: rabljeno, največja dovoljena obremenitev: 29.510 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2016, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, SDP 27, LASI EN 12642 Code XL, 349.026 km Značajke nadogradnje (unutra / spolja): * Klizna cerada levo i desno * Brzi zatezač napred * Klizni krov * Sertifikat za osiguranje tereta EN 12642 Code XL * Unutrašnja visina cca 2.730 mm * Perforirani spoljašnji okvir (Multilock) * Graničnik za palete levo i desno * Pod od šperploče, nosivost osovine viljuškara 7.100 kg * 36 umetnih aluminijumskih letvi * 3 para pomičnih kliznih prstenova * Zadnja portalna vrata sa duplim bravama * Merdevine za penjanje * Skladišni sanduk * Rikverc svetla * Zadnje magleno svetlo Podvozje / ostala oprema: BPW Eco Plus osovine Crjdpfxsym H I Te Apleb * Vazdušno vešanje * Podizanje i spuštanje * ABS, EBS * Pneumatici 385/65 R 22,5 * Preostali profil cca 7 - 14 mm ---- Ponuda bez obaveze sa lokacije Bocholt, uz mogućnost prethodne prodaje i greške. Prodaja isključivo pravnim licima ili za izvoz.

Stanje: novo, Leto izdelave: 2026, Standard features: - Robust, high-quality, and inclined rotation guard for easy speed reading - LED lighting - Rapidly adjustable and ergonomic drill depth stop - Infinitely variable speed control - Power cable with SCHUCO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock Crodpfxsby Stps Apljb - Emergency stop push button Technical data: - Weight (kg): 30 - Motor power (kW): 0.45 - Single-phase 230 V - Spindle speed (rpm): 250–3000 - Drilling capacity (mm): 10 - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth: 50 mm - Throat: 180 mm - Column diameter: 50 mm - Usable working area (W x L): 300 x 200 mm - T-slots: 2, spacing 100 mm Dimensions: width 12/20 mm - Spindle taper: B16 - Speed display: digital - Drill depth display: scale - Drill depth stop: rapidly adjustable stop ring - Manual feed Optional accessories: Drilling package 1, consisting of: - Machine vice [felix] 2.0, 80 mm - Keyless drill chuck B16, 1–13 mm (accuracy 0.17 mm), 270.00 € - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SALES AND SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST AN OFFER!

Stanje: rabljeno, Leto izdelave: 2019, Ta CNC plazemski rezalni stroj MicroStep Master Cut, tip RS, je predmet spletne dražbe na naši industrijski ali strojni dražbi – inventar podjetja ZINK NFZ GmbH & Co. KG. Cedpfx Asy Hqmzjpljrb To in številne druge pozicije najdete na naši platformi.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, proizvajalec krmilnikov: MicroStep, model krmilnika: iMSNC, število osi: 3, This 3-axis plasma cutting machine MicroStep 3001.15P/ME was manufactured in 2021. It offers a working area of 1500x3000 mm, making it ideal for precise and large-scale cutting tasks. If you are looking for high-quality cutting capabilities, you should consider the MicroStep 3001.15P/ME machine, which we have available for sale. Please contact us for further information. • Working area: 1500 x 3000 mm • Permissible sheet thickness: robust design for material thickness up to 100 mm • Guides/drives: high-quality linear guides and backlash-free dual-sided drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic core gas console • Table surface: slatted cover on the cutting table • Height control: "THC" module for automatic height adjustment via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: dual-sided rope safety system (collision protection) for the gantry with emergency stop • Optical signaling: 2-color LED signal tower on the gantry crossbeam • Operator interface: externally mounted MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting) Crjdpfx Ajycvq Asplsb

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 07/2014, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 2.200 mm, skupna dolžina: 4.750 mm, skupna širina: 2.200 mm, skupna višina: 3.160 mm, vzmetenje: zrak, velikost pnevmatike: 195/14, medosna razdalja: 2.060 mm, barva: drugo, Leto izdelave: 2014, Oprema: dvižna zadnja plošča, = Additional Options and Accessories = - Tail lift = Notes = Number of axles: 1, Payload: 1,230 kg, Unladen weight: 1,270 kg, Gross weight: 2,500 kg, Type of chassis: Full chassis, Chassis material: Steel, Tail lift, Tail lift type: Rear tailgate, Tail lift capacity: 750 kg, Tail lift manufacturer: Dhollandia dhlm.10, Tail lift material: steel and aluminium = Further Information = General Information Cab: Day cab Registration number: ON-30-KB Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 195/14 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Weights Unladen weight: 1,270 kg Payload: 1,230 kg Gross vehicle weight (GVW): 2,500 kg Crsdpfx Asy Iv Utepljb Functional Tail lift: Dhollandia dhlm.10, Rear tailgate, 750 kg Loading height: 92 cm Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None

Stanje: rabljeno, Leto izdelave: 2012, CNC laserski rezalni stroj Proizvajalec: Microstep Tip: FibreLas MSF 3001.15L Leto izdelave: 2012 CNC krmiljenje: iMSNC Windows Delovne ure laserja cca: 4.000–5.000 Crodpsx Eh Drjfx Apljb Moč laserja: 2,5 kW Delovna površina: 3.000 x 1.500 mm Debelina pločevine jeklo (max.): 15 mm Debelina pločevine nerjavno jeklo (max.): 8 mm Debelina pločevine aluminij (max.): 8 mm Delovna temperatura: +10 do +30 °C in max. 90 % relativna vlažnost (pri 20° C) Izpušni kanal (levo in desno): izhod levo Ø 250 mm Laserski vir: IPG Ytterbium Laser System YLS 2,5 kW Laserski hladilnik LC 170.01-A.3.5 Napetost: 400 V / 3F / 50 Hz Filter naprava TEKA 4H 5,5 kW Zunanje mere: ca. 10.400 x 3.610 mm

Stanje: dober (rabljeno), konfiguracija osi: 1 os, prva registracija: 03/2023, dolžina tovornega prostora: 5.300 mm, širina tovornega prostora: 2.140 mm, višina nakladalnega prostora: 2.400 mm, skupna dolžina: 5.700 mm, skupna širina: 2.250 mm, skupna višina: 3.350 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17,5, medosna razdalja: 2.200 mm, barva: drugo, Leto izdelave: 2023, Število osi: 1, nosilnost: 3015 kg, lastna teža: 1610 kg, bruto teža: 4625 kg, tip šasije: popolna šasija = Dodatne informacije = Splošne informacije Kabina: dnevna Registrska številka: OT-90-SY Pogonski sklop Vrsta goriva: dizel Menjalnik Menjalnik: ročni Konfiguracija osi Dimenzija pnevmatik: 205/65R17,5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Os 1: profil pnevmatike levo: 3 mm; profil desno: 2 mm Teže Lastna teža: 1.610 kg Nosilnost: 3.015 kg Bruto teža: 4.625 kg Csdpfx Asyx Td Hsplsrb Funkcionalno Višina nakladalne površine: 95 cm Okolje Emisijski razred: Euro 0 Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: brez Finančne informacije Cena leasinga: 849 € na mesec (dostavno vozilo, 72 mesecev); prosimo vprašajte za več informacij in pogojev

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: MASTER PLUS (Müşteriye Özel Ölçüler), vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, vrsta hlajenja: voda, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, varnostna svetlobna zapora, * The MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine typically used for cutting large-sized metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials to be cut in different dimensions, it offers a flexible working area by creating continuous, seamless, and independent cutting zones at various points of the machine. It enables higher production speeds and increased efficiency when processing large-volume materials, thus saving significant time and labor costs. * Single table, fixed cutting bed. * Customizable with a wide range of cutting areas. Crjdpfx Aeyy Nrvsplob * Available with Raycus, MaxPhotonics, and IPG resonators. * Compatible with Raytools, Precitec, and Bochu laser cutting heads. * CNC controllers by LYNCA/CYBELEC, Eurosoft, or ESA. * High operating convenience with a 21.5'' touchscreen display. * Complies with CE standards. * Can be equipped with fiber laser sources ranging from 2kW to 30kW. * Bevel cutting option available. * User-friendly design with easy access to the cutting area. * Rigid, heat-treated, monoblock welded steel frame providing high structural strength. * Increased resistance and high dynamic performance with an aluminum bridge design. * Ensures energy savings with low power consumption. * Remote service capability. * Automatic lubrication system. * As both design and production are handled in-house, it is possible to accommodate custom requests from customers.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: EDGE PLUS 1500 x 3000mm / 1500 x 4000mm, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: RAYCUS - MAXPHOTONICS - IPG, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, varnostna svetlobna zapora, * Raycus, MaxPhotonics, and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC. * High ease of use with a 21.5'' touchscreen. * Dual table cutting system with side loading and motorized table exchange. * Occupies 40% less floor space compared to a standard fiber laser cutting machine. * Easy and cost-effective transportation. * Compliance with CE standards. * Features a compact setup and a transversely removable cutting table. * Can be equipped with fiber laser sources from 2kW up to 12kW. * Working range of 1,500mm x 3,000mm and 1,500mm x 4,000mm. Crjdpfx Apoyy Iyroleb * User-friendly design with easy access to the cutting area. * Rigid, monoblock, welded steel body with heat-treated robust frame. * Enhanced resistance and high dynamic performance thanks to the aluminum gantry design. * Energy savings with low power consumption. * Remote service capability. * Automatic lubrication system. * As both design and production are carried out in-house, customized manufacturing according to customer-specific requirements is possible.

Stanje: rabljeno, Leto izdelave: 2019, Action package 1: Walterscheid wide-angle PTO shaft | Top attachment / Electrohydraulic control | Tank inner ring (straw ring) | Reduction gearbox / 1000 rpm with electrohydraulic control switch-over | Air-braked axle | 20 m³ / i-FeedGood L with 4 weighing bars Cjdpfsttv Imsx Apljrb

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 403/05, dolžina mize: 3.000 mm, moč servomotorja: 1.500 W, širina mize: 1.500 mm, Oprema: dvostranski, S sistemom za plazemsko rezanje HyperTherm Powermax 1100 in sušilnikom zraka M.T.A. DE009. Credpfx Apew I D Iaoleb Stroj je bil uporabljen za izdelavo prezračevalnih kanalov in spojnih elementov. Vključuje posebne programe za upravljanje stroja in izdelavo detajlov za prezračevalne proizvode: - AsperWin (osnovni program za upravljanje CNC stroja za Windows. Možen je uvoz dxf datotek), - Asper Nesting (omogoča učinkovito razporeditev velikega števila različnih rezanih kosov za najboljšo možno izrabo materiala z minimalnimi odpadki), - Air Select (za proizvajalce kanalov omogoča hitro in udobno načrtovanje HVAC komponent).

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 03/2027, največja širina rezanja: 20 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 750 mm, skupna širina: 1.000 mm, skupna višina: 1.150 mm, nazivna moč: 1 kW (1,36 KM), vhodna frekvenca: 50 Hz, potrebna višina: 1.150 mm, zahteva za prostor dolžina: 750 mm, potrebna širina: 1.000 mm, Stroj za rezanje kruha Wabäma model: Allround Economy Plus 380.200 maks. število rezin: 100 kos/min. rezilo iz visoko kakovostne specialne teflonske prevleke stroj na kolesih preverjeno po DGUV V3 samo pri nas priklop 400V, CEE vtič 16A Rabljeni stroj, preverjen pri SAB + servis rezervnih delov Možnosti: Cedpfx Aovkn Hzjplorb Vzdrževalna pogodba Rezervno rezilo Servisni paket Veliko strojev za rezanje kruha na zalogi!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, - nalagalna miza za jumbo dimenzije 6000 x 3210 mm z integriranimi transportnimi trakovi - modul za rezanje lepljenega stekla z dolžino reza: 4600 mm 4 razkladalne roke nov grelni element od decembra 2025 min. debelina stekla: 3 + 3 mm + PVB maks. debelina stekla: 8 + 8 mm + PVB Crodjyh T Ruspfx Aplsb Ločevanje z rezilom: Po samodejnem rezanju in ločevanju se PVB reže z rezilom, kar zagotavlja čisti rob brez ostankov PC nadzorni sistem Windows PC "View Plus" vključno s ravnim monitorjem z prikazom vzorca rezanja in uvozom optimizacij Postavitev prikazana na fotografijah

Stanje: rabljeno, Ta oglas je za varnostno omaro ENVAIR Safe Comfort Plus. Crodpfx Apexzgzzslsb

Stanje: zelo dobro (rabljeno), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional device for mechanical ventilation used in ambulances, medical transport, emergency departments (ER), intensive care units (ICU), and by rescue services. The device powers on and operates, with a clear display and visible menu and parameters. The visual condition is good, showing normal signs of use consistent with its age (see photos). The equipment comes from the German market. Specifications & Included Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: transport • Module: LDS RD 228 • Gas supply (O₂ / air) Codpfex N Icxox Aplsrb • Includes transport bags • Hoses and mounting bracket included • CE marked, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes commonly used in emergency medicine • Adjustable settings: Vt, frequency, FiO₂, PEEP, and more • Clear screen with real-time parameter monitoring • Safety alarms Technical condition: • Used device • Fully operational – powers on and responds to settings • No current calibration certificate (to be obtained by the buyer if required) Formal notice: This is medical equipment – intended for use by qualified personnel only. Ideal for private ambulances, medical transport companies, training purposes, military, offshore use, or as backup equipment.