Mammut 200 Liter Druck-Sandstrahlgerät Profesionalni Tlačni Peskalci Za Industrijo nakup rabljenega (104.222)

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting Credswc Rk Eepfx Aahsg - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: novo, Our SAPI pressure blasting unit, type 'Mammut', with a 60-litre vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. A water separator is also permanently installed on the blasting unit; this removes moisture from the compressed air and prevents the blast media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This initiates and stops the blasting process by actuating the hand lever mounted on the blast hose. The scope of delivery includes: - SAPI pressure blasting unit 'Mammut 60 L' - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off Technical data - Pressure Blasting Unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed piping 1" internal and external - Rubber-coated metal nozzle with rubber seal - Large maintenance opening - Chassis with rubber wheels - Media dosing valve (suitable for all common blasting media) - Tank capacity 60 l - Total height 1,130 mm - Tank diameter 360 mm - Overall diameter 700 mm - Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest on/off times, fully compliant with occupational safety guidelines (VBG 48) - The pressure setting can be precisely adjusted prior to operation: continuously adjustable from 0.1 to 12.0 bar - Reduced abrasive consumption as the pressure vessel remains under pressure, preventing unnecessary discharge of media - Upon restarting, full blast pressure is immediately available at the nozzle, eliminating build-up time—thus, significant reduction in both media consumption and wear on the blast hose - No moisture (condensate) forms inside the vessel, as it remains pressurised at all times and is not vented with each start/stop. Additional benefits include: Codswc Afhopfx Aahsrg - Optimum media dosing via hardened precision valve - Lower compressed air requirement, significantly reducing fuel (diesel) consumption - One-person operation, as vessel pressure is constantly indicated and can be adjusted via the pressure gauge without needing to start the device first - No sensitive components such as control valves, membranes or gaskets—resulting in low maintenance and reliable operation. Only the blast hose within the safety shut-off needs to be checked and replaced if necessary.

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Crjdpfx Aswc Ri Ioahjg Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: rabljeno, Hydraulic operator lifting platform, brand Sordella Spa, used. Maximum load capacity: 200 kg Maximum platform height: 13 m Codpfx Aaszn Hr Tehsrg Maximum working height: 14.5 m

Stanje: dober (rabljeno), Približno 1.000 – 1.500 kosov, pregledne škatle za shranjevanje, D: 350 mm, Š: 210 mm, V: 200 mm – rabljeno: Crodpfx Aajzxcnxehjg Cena za kos, na lokaciji: 3,50 € (neto), plus 5 € / lesena paleta! Cena pri celotnem nakupu: 3 € (neto) / kos, plus 5 € / lesena paleta! Minimalna količina za nakup: 198 kosov (2 paleti) Proizvajalec: Mešano, prevladuje Promat MK3 (danes Tecwerk) Tip: Pregledne škatle za shranjevanje Letnik izdelave: neznano Barva: Modra in rumena, pretežno modra Zunanje mere: približno D: 350 mm, Š: 210 mm, V: 200 mm Notranje mere: približno D: 280–300 mm, Š: 190 mm, V: 190 mm Teža na posodo: približno 650 g Nosilnost: 20 kg Dimenzije pakiranja: 1200 x 800 x 2000 mm Stanje: Suho, rahlo prašno, prask, delno prisotne kode QR, ostanki etiket Na voljo: takoj Lokacija: 78234 Engen

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 0841412556, Offener Milchkühltank FRIGOMILK G1, 200 Liter, 2 Melkgänge SERIENNUMMER: 0841412556 TECHNISCHE DATEN HERSTELLERANGABEN: - Innenbehälter und Außenverkleidung aus Edelstahl AISI 304, auf Rollen; - maximales Volumen 212 Liter, Nennvolumen 200 Liter; - Durchmesser 784 mm; - Gesamthöhe 1800 mm; - Gesamtgewicht 77 kg; - Spannung 1230 V; - Max. Druck: 14 bar; - Hochdruckseite: 28 bar; - Nennleistung: 0,82 kW; - Kompressorleistung des Kühlaggregats: 0,5 PS; - Primärfläche des Trapcold™-Laserschweißverdampfers für höchste Effizienz. - Extra starke, umweltfreundliche und leistungsfähige Polyurethanschaum-Isolierung. - DN50 Auslauf – Schmetterlingsventil inklusive. - Millimetergenauer Edelstahl-Peilstab zur Direktablesung des Milchpegels in Litern. KÜHLSYSTEM: - Vereisungsfrei, kühlt auch bei geringem Füllstand; - Direktexpansion; - Kältemittel R404A; - Edelstahlgehäuse. - Kompakt und einfach zu installieren. ELEKTRISCHES SYSTEM: - FIPO 0 elektronischer Milch-Controller; - Temperaturkontrolle und Anzeige der Milch; - Rührwerk-Programm; - Anschlusskabel mit genormtem Stecker (männlich), 380 V; - Edelstahlellenbogen; - 60 Hz Netzfrequenz. Sehr guter technischer Zustand. Nur für rumänische Unternehmen besteht die Möglichkeit des Ratenkaufs, Anzahlung erforderlich. Crjdpoild N Rofx Aahsg Preis: 2.300 Euro + MwSt., verhandelbar, FCA: Oradea/Rumänien. Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna širina: 90 mm, skupna dolžina: 136 mm, skupna masa: 200 kg, vhodna napetost: 400 V, Oprema: žerjav, Naprodaj je Speidel Braumeister 200, pivovarska naprava, v odličnem stanju. Naprava je bila rabljena, vendar je tehnično in vizualno zelo dobro ohranjena ter bila vedno skrbno vzdrževana. Podrobnosti: • Speidel Braumeister 200 • Rabljen, a v odličnem stanju Crsdpfx Aezwn U Usahog • Idealno za ambiciozne pivovarje ljubitelje in manjše komercialne pivovarne • Lokacija: Italija Če ste zainteresirani ali potrebujete več informacij, mi prosim pošljite sporočilo. Na voljo je tudi dodatna oprema.

Leto izdelave: 2005, stanje: generalkompletno obnovljen (rabljeno), Ponujamo v celoti obnovljeno preizkusno napravo ZwickRoell 1484 s kapaciteto 200 kN za preizkušanje na natez in stiskanje, izdelano leta 2005. Proizvajalec: ZwickRoell Model: 1484 Leto izdelave: 2005 Stanje: obnovljeno ID kategorije: 407 Crodpfxszw N Hlo Aahjg Tip naprave: preizkusna naprava s kapaciteto 200 kN za preizkušanje na natez in stiskanje Vrste preizkusov: natez in/ali stiskanje Preizkusna komora: 2, zgoraj in spodaj Kapaciteta: 200 kN Dodatna oprema: vključena, zlasti mehanska vpenjalna naprava Naprava bo dobila novo nadzorno omarico s tehnologijo DOLI in programsko opremo za preizkušanje v skladu s standardom ISO 6892-1. Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 120.500 l, skupna višina: 20.000 mm, notranji premer: 3.000 mm, zunanji premer: 3.300 mm, material stene: nerjavno jeklo, stenska struktura: enoslojni, Število komor: 1, obratovalna temperatura: 20 °C, obratovalni tlak: 3 letvica, Nerjaveča tlačna posoda, stoječa, izolirana Tehnični podatki / Dimenzije Razpoložljivo število kosov: 8 Prostornina: približno 120.000 litrov Vrsta posode: tlačna posoda Stanje: rabljeno Primerno za stik z živili: da Crodpfxozvh Dtj Aaheg Izvedba: stoječa Notranji premer: približno 3.000 mm Zunanji premer: približno 3.300 mm Skupna višina: približno 20.000 mm Specifična teža medija: 10,00 t/m³ Delovni tlak: nadtlak Delovni nadtlak: 3,00 bar Debelina stene spodnjega dna: približno 6,0 mm Debelina stene zgornjega dna: približno 4,5 mm Debelina stene plašča / valja: približno 3,5–5 mm Delovna temperatura: 20 °C Material / Izvedba Material notranjega plašča: nerjaveče jeklo Material: V2A-1.4301 (AISI 304) Zunanja površina: brušena, varjeni šivi jedkani Notranji varjeni šivi: da, brušeni Izolacija Izolacija je prisotna Debelina izolacije: približno 120 mm Izolacijski material: mineralna volna Material izolacijskega plašča: aluminij Izolacijski plašč: trapezna pločevina Oprema Izvedba podnožja: obroč/podstavek Število: 1 Montaža: fiksna Vrsta zgornjega dna: posoda Vrsta spodnjega dna: posoda Zgornje dno: 1 x izolacijski pokrov DN 900 1 x odprtina z izolacijskim pokrovom DN600 1 x pokrov za armature z naslednjimi priključki: 1 x kombinacija čistilnega, zračnega in ventilacijskega ventila (RLV) DN 50 1 x vakuumski ventil, obremenjen s težo, z 2 grelnimi vložki in termostatom 1 x varnostni ventil 1 x prenapetostna zaščita 1 x navoj DN 50 za sondo Plašči: 1 x kondenzacijska cev DN 25 1 x cev za zaščito kablov DN 32 1 x cev CIP DN 50 1 x podstavek iz Cr-Ni jekla (1.4301) z odprtino 600 x 600 1 x cev za pršenje z izmenljivim krogličnim nastavkom Spodnje dno: 1 x izlivna posoda DN 300 1 x izliv z pokrovom, verigo in ušesom DN 80 1 x priključni nastavek za vzorčevalni ventil DN10 Dokumentacija Risba Preizkusna knjižica Preizkusno potrdilo

Stanje: novo, Technical data for the base plate: Racking system: Nedcon Type: NS Year of manufacture: 2024 -new- IMMEDIATELY AVAILABLE Included in delivery: 01x base plate, new Material colour: RAL 5019 Capri blue Material thickness: approx. 3.50 mm Suitable for frame profile width: 100 mm Total width: approx. 200 mm Total depth: approx. 93 mm Cedpfxerfdals Aahsrg Total height: approx. 43 mm Hole spacing: approx. 145 mm Hole diameter: approx. 15 mm Weight per piece: approx. 0.663 kg General information about this item: This item is only available for collection. Should you require transport or shipping of this item, additional costs will apply. The exact charges can be requested from us depending on the delivery location and scope of delivery.

Stanje: pripravljen za uporabo (rabljen), Transporter za ostružke, transporter za odpadni material, Knoll 320 S-1/200, Rabljeni stroj Proizvajalec: Knoll Tip: 320 S-1/200 Skupne dimenzije: Širina: 6200 mm Globina: 1300 mm Višina: 1610 mm Specifikacije traku: 480 x 130 x 60 x 310 mm Hitrost traku: 1,8 m/min Leto izdelave: 2015 Velikost izhodne odprtine: 550 x 530 mm Odprtina zalogovnika: 3120 x 410 mm Csdpfx Aajxtwqdjhsrg Razmak lamel: 315 mm

Stanje: zelo dobro (rabljeno), Valjčna transportna sistema za pohištveno industrijo, WTT Fördertechnik Gmbh, tip 121 750 kosov kompletnih valjčnih transportnih sistemov, dolžina 3 m. Cena za: 1 kos = 75 EUR (skupna dolžina 3 m) Credpfewwmitex Aahsg Za večje količine se cena določi individualno. Podrobni opis: Dolžina valjčnega transportnega sistema L = 3000 mm Vgradna dolžina EL = 500 mm Razdalja med nosilnimi valji T = 200 mm Višina valjčnega transportnega sistema H = 280 mm +/- 25 mm, nastavljiva Število nosilcev FA = 1 kos na tekoči meter Sestavljeno iz: - 2 kosa stranskih profilov (stranske tirnice), dolžina 3000 mm, profil 20/80/40/3 mm, razdalja med luknjami 25 mm, luknje ustrezajo premeru osi 12 mm, prašno lakirano v barvi RAL 6011, zelena. Teža na stransko tirnico 8,15 kg - 15 kosov vstavljivih nosilnih valjev Serija 4.5.80.1.12.1.5.00 Jeklena cev - 80 x 2,0 mm debelina stene, Os - 12 mm vzmetna os, Ležaj - jekleni vložek z ojačanimi, stisnjenimi specialnimi krogličnimi ležaji. Površina nosilnih valjev je jeklena. Vgradna dolžina EL = 500 mm Teža na valj 2,4 kg - 3 kosi podstavkov za most, ki se pritrdijo z vijaki, v stabilni varjeni konstrukciji iz posebnega profila s prečno prečko, nastavljivi po višini +/- 25 mm s pomočjo navojnega vretena M16 in vijaka. Z osnovno ploščo za pritrditev na tla in luknjo za moznike. Prašno lakirano v barvi RAL 3000, rdeča. Teža na podstavek – 2,5 kg. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do prodaje predhodno)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 24 meseci, skupna dolžina: 1.560 mm, skupna širina: 970 mm, skupna višina: 160 mm, kapaciteta rezervoarja: 320 l, lastna masa: 1.050 kg, moč: 13,5 kW (18,35 KM), električna varovalka: 50 A, New machine with 24-month warranty Advantages: + Robust construction + Bowl, central shaft, and spiral made of stainless steel + Drive with two motors (spiral & bowl) + Mobile machine on swivel castors with fixed bowl + Flour dust cover closes gently with dampers, featuring automatic shut-off + Dirt protection covers for adjustable feet + Short kneading time with excellent results + Control panel with push-buttons for easy operation, with 3 programmable timers + 1 reverse speed for mixing, 2 forward speeds for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast spare parts supply within 1–2 working days Special accessories, available as an optional extra: Soft starter - Machine can be operated with 32A instead of 63A Surcharge: + €1,630 net Technical data: - Flour capacity: 10 – 120 kg - Dough capacity: 15 – 200 kg - Bowl volume: approx. 320 liters - Ø Outer edge of bowl: 970 mm - Motor power: 13.5 kW (kneading spiral & bowl drive) Cedpfohyc T Eex Aahorg - RPM at 50Hz (1st / 2nd speed): 98 / 196 - Electrical connection: 400V – 3Ph – 50Hz – 63A CEE plug - Dimensions in cm: 97 x 156 x 160 (W x D x H) - Height with flour dust cover open: 220 cm - Height upper edge of bowl rim: 94 cm - Net weight: 1,050 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 24 meseci, skupna dolžina: 1.720 mm, skupna širina: 1.020 mm, skupna višina: 143 mm, kapaciteta rezervoarja: 320 l, lastna masa: 1.350 kg, skupna masa: 1.600 kg, moč: 13,5 kW (18,35 KM), električna varovalka: 50 A, New machine with 24 months warranty Advantages: + Robust construction with mobile bowl trolley + Bowl, central shaft, and spiral made of stainless steel + Powerful drive with two separate motors (spiral & bowl) + Hydraulic (vertical) lifting device for the dough mixer + Flour dust cover closes gently with dampers, equipped with automatic shut-off + Short kneading time with excellent results + Control panel with push-buttons for easy operation, featuring three timer switches + 1 reverse speed for mixing, 2 forward speeds for kneading + Up to 99 different mixing/kneading programs can be saved + Switch for manual or automatic operation + Fast spare parts supply within 1–2 business days Bowl trolley: - 1 bowl trolley included in the price - Additional bowl trolley for SpiralO XL 200A: + €5,465 net / trolley Special accessories, optionally available at extra cost: Soft starter - Machine can be operated with 32A instead of 63A Surcharge: + €1,630 net Technical data: Flour capacity: 10–120 kg Dough capacity: 15–200 kg Bowl volume: approx. 320 liters Ø Bowl outer edge: 1,020 mm Motor power: 12 kW (spiral) + 1.5 kW (bowl) = 13.5 kW RPM at 50 Hz (1st / 2nd speed): 105 / 210 Connection values: 400V – 3Ph – 50Hz – 50A Protection: 63A-CEE plug Codpfjhydakox Aahjrg Dimensions in cm: 102 x 172 x 143 (W x D x H) – machine head down Dimensions in cm: 102 x 172 x 195 (W x D x H) – machine head up Height of upper bowl rim: 85 cm Machine weight: approx. 1,350 kg Bowl trolley weight: approx. 250 kg / trolley

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 36 meseci, New machine 3-year warranty incl. delivery* & on-site instruction in your bakery *Subject to ground-level installation and sufficient door widths Advantages: + Unbeatable value for money + Modern, volumetric dough divider (gentle on dough, no vacuum!) Cedpfx Asvw R Ihjaherg + Especially suitable for soft wheat-rye mixed doughs + Expanded weight range possible with double-portion output (400 - 3300 g piece weight) + Revolutionary dough dividing system requires minimal cleaning effort + No dough residues left in the drum at the end of the production cycle + Doughs are divided without unnecessary stress and compression + High precision of dough weights at all times + Pressure lubrication with oil circulation and filtration, very low oil consumption + Facilitated dough hopper filling due to low height + Height-adjustable conveyor belt available + Discharge onto table or to other machines (rounder, etc.) possible STANDARD equipment: + Weighing chamber made of stainless steel + Robust construction: steel frame, stainless steel housing + Double-piece function (only on model with 1 piston) + Touchscreen control with self-cleaning program >> Setting hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading production statistics + Electronic speed adjustment + Electronic weight adjustment + Electronic piece counter + PTFE-coated stainless steel hopper (depending on size, conical or square) + 40 kg dough capacity with safety grid according to CE >> Other hopper sizes available at low extra cost (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven, height-adjustable discharge belt + Adjustable flour duster prevents dough pieces from sticking to discharge belt + Scraper on the dough discharge belt Technical Data: Capacity: 900 - 2500 pieces / hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Pistons: 1 dough dividing piston (diameter 150 mm), 1-row dough discharge Power rating: 2.45 kW Connection specification: 400V - 3Ph - 50Hz Protection: 16A CEE plug Machine dimensions in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Machine dimensions in resting position: 1052 x 626 x 1501 mm (WxDxH) Feed height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, pricing on request: - Stainless steel drag chain for pre-rounding - Frequency converter for stepless speed control of the dough discharge belt - Extraction roller at chamber output - Short rounding bar - Increased ground clearance 10/15/20 cm - Additional power connection for work table / rounding bar etc. >> 400 V three-phase >> 230 V single-phase or three-phase

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Technical Description: The system is designed for weighing standard trolleys. The trolley is pushed into the system. By pressing a button, the free lift and weighing process are activated. The free lift is driven by a motor. In combination with the bending beam load cell and the weighing terminal, the weight can be read from the display and forwarded to the existing DMS or ERP system. If required, the recipe scale can be equipped with rollers as a mobile version. The system can be fitted with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit Cjdpfx Aaottv Dfshorg • Push button • Shafts, bearings • Height-adjustable feet (alternatively mobile version) • CEE plug

Stanje: novo, SAPI Mammut peskalni stroj s sistemom QUICK STOP™ Industrijski peskalni stroj SAPI Mammut s sistemom QUICK STOP™ je zmogljiva naprava za peskanje, ki se uporablja v industrijah, kot so avtomobilska, gradbena in proizvodna. Namenjen je hitri in učinkoviti pripravi površin, čiščenju in obdelavi kovine, betona in drugih materialov. QUICK STOP™ – Varnost in Zaščita Crsdpfxoupyw Es Aahjg QUICK STOP™ je varnostna funkcija, ki preprečuje nesreče in ščiti napravo pred poškodbami. Takoj ustavi peskanje takoj, ko operater spusti krmilni ročaj, s čimer preprečuje nevarnosti in prekomerno obrabo opreme. Učinkovitost in Vzdržljivost Sistem QUICK STOP™ zmanjšuje porabo zraka in energije, zaradi česar je peskanje bolj ekonomično in učinkovito. Peskalni stroj Mammut je izdelan iz visokokakovostnih komponent, ki zagotavljajo zanesljivo delovanje tudi v težkih razmerah. Vsi naši stroji so CE in TÜV certificirani. Fleksibilnost in Vsestranskost Na voljo v različnih velikostih, da ustreza različnim potrebam peskanja. Združljiv je z več vrstami abrazivov, od standardnega peska do plastičnih in kovinskih granulatov. Mammut s sistemom QUICK STOP™ je idealen za pripravo površin, čiščenje in odstranjevanje rje, barve in premazov. Natančnost in Enostavna Uporaba Mammut s sistemom QUICK STOP™ omogoča natančno nastavitev tlaka med delovanjem, kar zagotavlja dosledne rezultate in visoko natančnost. Opremljen je tudi z lahko dostopnimi točkami za pregled in vzdrževanje. Maksimalna Varnost Sistem QUICK STOP™ z varnostnim stikalom zagotavlja najvišjo varnost pri uporabi. Prav tako preprečuje nabiranje vlage v stroju, saj ohranja konstanten tlak tudi po zaustavitvi peskanja, kar ni mogoče pri običajnih vklop/izklop sistemih. Popolna Oprema Vsi Mammut peskalni stroji s sistemom QUICK STOP™ so popolnoma opremljeni in vključujejo: ✔ Peskalno cev ✔ Šobo za peskanje ✔ Regulator tlaka ✔ Ločevalnik vode ✔ Dozirni ventil za abraziv ✔ Osnovno osebno zaščitno opremo

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off Csdpfx Aajwc Rcnohsrg - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)

Stanje: generalkompletno obnovljen (rabljeno), Rabljen stroj KUSTNER Ax za pakiranje masla Izboljšajte proces pakiranja masla z zanesljivim in učinkovitim strojem KUSTNER Ax za pakiranje masla. Ta rabljen model je zasnovan za maksimalno zmogljivost in je odlična izbira za mlekarne, ki želijo optimizirati svoje procese pakiranja masla. Lastnosti: - Visoka učinkovitost: Zasnovan za hitro in natančno pakiranje velikih količin masla, kar poveča hitrost proizvodnje. - Uporabniku prijazen vmesnik: Opremljen z enostavno upravljavo, ki uporabnikom omogoča, da brez težav nastavijo in prilagodijo parametre pakiranja. - Različne možnosti pakiranja: Zmožen je obdelovati različne oblike in velikosti masla, kar zagotavlja prilagodljivost za vaše potrebe pakiranja. - Trpežna konstrukcija: Izdelan je iz visokokakovostnih materialov, ki zagotavljajo dolgo življenjsko dobo, zanesljivost in vzdržljivost v hitrem proizvodnem okolju. Prednosti: - Stroškovno učinkovita rešitev: Ta rabljena ponudba stroja predstavlja cenovno ugodno alternativo novi opremi, hkrati pa ohranja visoko zmogljivost in zanesljivost. - Dosledna kakovost: Zagotavlja natančno pakiranje, kar ohranja celovitost izdelka in kakovost vašega masla. - Prostorno učinkovita zasnova: Kompaktna zasnova omogoča enostavno integracijo v obstoječe proizvodne linije in optimizira vaš delovni proces. Investirajte v rabljen stroj KUSTNER Ax za pakiranje masla, da optimizirate svoje procese pakiranja in učinkovito izpolnjujete tržne zahteve. Zmogljivost: 55 kosov/minuto Cedpfx Aozxxyqoahsrg Doziranje s lijakom: Da Nadzorni elementi: Novi Format: 100–300 gramov Možnost spremembe za: Dodatno za 10-gramske porcije tipa "medalion". Na voljo: Takoj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Dražitev dveh vijačnih kompresorjev Kaeser, enega hladilnega sušilca Kaeser in rezervoarja za stisnjeni zrak! Vijačni kompresor Kaeser SK 22 Leto izdelave: 2020 Vijačni kompresor Kaeser SK 19 Leto izdelave: 1995 Hladilni sušilec Kaeser TB 26 Leto izdelave: 2016 Rezervoar za stisnjeni zrak Prostornina: 500 l Leto izdelave: 1986 Crsdpfx Ajzktnysaheg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 19,5 kW (26,51 KM), Avtomatski mehanizem Winkel Wolf K+G WETTER, premer 130 mm • Popolnoma obnovljen v tovarni, v ceno je vključeno 1-letno jamstvo. • Vključuje velik sprejemni lijak z zmogljivostjo nad 200 litrov in napravo za odstranjevanje tujkov (tovarniško nameščena). • Proizvedeno v Nemčiji. Crodpfx Aozum T Roahog • Moč: 19,5 kW, z 2 hitrostmi za veliki vijak za dovod materiala in 2 hitrostmi za delovni vijak. • Dimenzije dovoda: 130 mm. • Zunanje dimenzije: 1300 mm x 920 mm x 1650 mm. • Naprava ima 3 vijake: delovni, dovodni in mešalni. • Cena za dodatni avtomatski dvigalnik: 4.000 evrov, brez DDV.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Rezkalni rotor za iztiskalni granulacijski stroj Credpfx Aspgulwsahsg Proizvajalec: MAAG / Scheer - Širina rezkalnega rotorja: 200 mm - Odlično stanje

Stanje: novo, Leto izdelave: 2025, skupna masa: 244 kg, skupna višina: 2.270 mm, pritisk: 11 letvica, nov rezervoar za stisnjeni zrak KAESER, 1000 litrov, vertikalni, pocinkan, 11 bar (vključno s kompletom ventilov in manometrom) Letnik izdelave: 2025 Visokokakovosten rezervoar za stisnjeni zrak v pocinkani izvedbi. Notranjost in zunanjost pocinkani po postopku potopnega pocinkanja v skladu s standardom DIN EN ISO 1461. Priključni nastavek za stožčaste navoje. Tehnični podatki: - Prostornina: 1000 litrov - Največji pretlačni tlak: 11 bar - Premer: 800 mm - Višina rezervoarja: 2265 mm - Masa: 244 kg - Priključek za dovod stisnjenega zraka: 2 x G 1 1/2" - Priključek za odvod stisnjenega zraka: 2 x G 2" Crodpfx Aasqt A Iqjhog - Priključek za varnostni ventil: G 2" - Priključek za odtočni ventil kondenzata: G 2" Odobritev rezervoarja: RL2014/68/EU Odprtina za vzdrževanje po standardu AD2000: 2 x ročna odprtina Minimalna delovna temperatura: -10 °C Maksimalna delovna temperatura: +50 °C Površinska obdelava: pocinkana Za nove stroje je mogoč ugoden lizing prek naše bančne institucije. Obiščite našo trgovino. Vedno imamo na zalogi širok izbor novih in rabljenih kompresorjev!

Stanje: novo, Edge sanding machine HOLZKRAFT KSO 200 F - Demonstration machine - Relief rollers on the fence guides, with tiltable sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubber-coated sanding roller ----- Technical Data ----- Sanding belt dimensions: 3,000 x 200 mm, Worktable dimensions: 960 x 350 mm, Worktable height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Extraction port diameter: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new demonstration machine - Crjdeu R S Erspfx Aahog

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Julabo Model: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent Condition / Year of Manufacture: 2018 For sale is a Julabo recirculating chiller FLW7006, a high-performance industrial cooling unit suitable for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been thoroughly inspected, and is in very good, clean condition. All functions are guaranteed, and the display and control elements work flawlessly. Typical Applications: - Machine and process cooling - Laboratory and testing technology Cedpfezix D Dex Aahsrg - Plastic, laser, or plant cooling Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connector - Casters for easy transport Technical Data: Manufacturer: Julabo GmbH Model: FLW7006 Serial Number: SN 10339349 Year of Manufacture: 2018 (according to nameplate) Refrigeration Technology: Refrigerant: R452A Fill Volume: 1,625 g Operating Pressure: max. 24 bar CO₂ Equivalent: 3.48 t GWP: 2140 Temperature & Performance Data (manufacturer’s specs): Temperature Range: –20 °C to +40 °C Temperature Stability: ± 0.5 °C Cooling Capacity (typical, depending on conditions): approx. 1.3 kW at –20 °C approx. 5.5 kW at 0 °C approx. 7.4 kW at +20 °C Connections & Equipment: - Flow and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Castor-mounted chassis Electrical Data: Power Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & Weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & Delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Power cable Shipping method: Freight delivery on pallet (by arrangement, shipping costs depend on destination) Collection: possible by appointment (Specifications subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.