Mae Ravnalna Stiskalnica - Dvojni Stolpec nakup rabljenega (4.919)

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Pgodpfx Ajt Hw Amjltsp Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Pgjdpfx Aot Hwwdeltjp Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: novo, Press force 300 t Working speed 3-8 mm/sec Stroke 500 mm Return speed 15 mm/sec Table size 3000 x 1500 mm Tank capacity 45 l Travel path x / y 2600 x 1000 mm Podpsvxw Hmsfx Altogp Clearance 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely milled with CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump from Bosch Rexroth - Hydrapack or Badeston hydraulic valve - Hydraulic block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/controller ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01 ,16092-03 - Two-hand control operation - Reset and emergency stop button - Safety cable with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s plant. - Hydraulic oil is not included in the price. - All handling costs (such as crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty includes the delivery of all spare parts required for repairs and service calls to the machine. Damaged parts must be returned to the manufacturer after replacement. - This warranty does not cover parts damaged by improper use.

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Pgedotqm Dgopfx Altep Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain

Stanje: rabljeno, Leto izdelave: 1994, KAISER preša Prešna sila 4.000 kN Nastavitev hoda 40–200 mm Nastavitev bata 150 mm Psdezp Ed Ropfx Altjgp Število hodov 20–80 1/min Površina mize 2.340 x 1.600 mm Površina bata 2.000 x 1.500 mm Vgradna višina 550 mm

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm Psdpfxot Hwz Nj Altegp gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm mit Aufspannplatte – 340 – 530 mm Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.

Stanje: rabljeno, Leto izdelave: 1987, Tlak 800 t Premer vretena 100 mm Število vrtljajev vretena 45 /min Razdalja med stojali 600 mm Površina mize 560 x 650 mm Izmetna sila 5 t Hod izmetnega mehanizma 15 mm Površina stikala 590 x 450 mm Pjdpfxjzl E Saj Altsgp Moč pogona 22,0 kW Teža 17,0 t Potreben prostor (ŠxGxV) 1,7 x 2,55 x 3,1 m Nominalni hod 1,46 mm z pogonom s kolenčastim vzvodom, zavoro vztrajnika, hidravlično sklopko z 2. zavoro, uravnoteženjem okvirja stroja, enojnim izmetnim mehanizmom v mizi, samonadzornim upravljanjem.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 7 A, stiskalna sila: 150 t, hod: 300 mm, Oprema: CE označba, dokumentacija / priročnik, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH CAPACITY: 150 TON Monolithic frame, entirely laser-cut and bolted in a pack. This feature ensures that all our presses remain deformation-resistant, even at the points of greatest stress. All components are manufactured in Italy. Hydraulic power unit with submerged ICME motor, 400 V, 50/60 Hz. Cylinders and frames manufactured in Italy. Monoblock GALTECH distributor. No. 2 unidirectional external gear pumps in aluminium by VIVOIL: one for fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel for setting required power. Pedpfxey E Rr Ij Altjgp Maximum pressure valve with mechanical lock to prevent overpressure. High-end 2-way CETOP MP valve block. Standard pressure gauge to display delivered power. INTECH electrical panel certified according to current regulations and with independent CE marking. Maximum Capacity: 150 TON Approach Speed (fast): 1450 mm/min Working Speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shank diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1300 kg

Stanje: generalkompletno obnovljen (rabljeno), Portalrichtpresse Druckkraft: 450 t Hub: 50 mm Lichte Weite: 1000 mm Arbeitsbereich: Länge: 5.200 mm Breite: 2.300 mm Höhe: 1.000 mm Gewicht: 45.000 kg Schraubenabstand links-rechts: 1.000 mm Pgedpfx Alefcnu Ietjp

Stanje: rabljeno, Technical details: Table diameter: 4500 mm Faceplate diameter: 4500 mm Operating hours: 0 h Swing diameter: 5000 mm Turning diameter: 5000 mm Workpiece height – max.: 2500 mm Control: Sinumerik 840D SL X-axis: 300 mm ram stroke X-axis: 2850 mm ram travel X-axis: 2850 mm working (without tool) X-axis: 5000 mm with tool changer W-axis: 1800 mm cross-rail travel Tool holders/positions: 12 Tool interface: HSK 100 (spindle) Workpiece weight: 100 t Table speed: 1–50 rpm T-slots: 8 pcs (36 H12) Ram speed – milling: 4000 rpm Rapid traverse in X and Z: 8000 mm/min Torque – milling: 100,000 Nm Torque – turning: 200,000 Nm Pjdpfxeu Ix H De Altjgp Total power requirement: 80 (2x40) kW Machine weight approx.: 140 t Machine dimensions LxWxH approx.: 11.5 x 6.6 x 8.4 m NEW CNC vertical turning lathe – machine will be built upon official order and down payment. Photos displayed show a newly built machine of this model that we delivered to a customer. (Images for illustration purposes) Manufacturing applications: Turning operations such as external longitudinal turning, internal and external face turning, and profile machining. Grooving operations both internal and external. Drilling, including short and deep-hole drilling. Milling, such as face, corner, profile, and T-slot milling. Thread cutting. Also suitable for roughing and end-machining operations. The machine bed, designed as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the workpiece weight is supported by two high-precision tapered roller bearings. Additionally, the table is equipped with hydrodynamic support for the workpiece. Other features: automatic tool changer 8-jaw power chuck (with power clamping spindle and hardened jaws) incl. 40 bar coolant system with filter unit Hydraulic and lubrication system by ATOS and Dropsa with Heidenhain axis measuring system Renishaw NEW – with warranty & service from WMW AG

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 110 t, Single-column press – Manufacturer Calende – 110 t Straightening Press – Table 800 × 700 mm For sale is a compact hydraulic single-column press (C-frame) from manufacturer Calende with a pressing force of 110 t. This machine impresses with its space-saving design, robust performance data, and versatile application possibilities, making it ideal for straightening, assembly, and pressing operations. ==== Pjdpefxygtefx Altsgp Technical Data + Information: Single-column Press Calende – 110 t Straightening Press ==== General Information - Manufacturer: Calende - Model: Single-column press - Design: C-frame press / Single-column press - Pressing force: 110 t - Machine weight: approx. 4.5 t - Dimensions (L × W × H): approx. 1,650 × 1,150 × 2,800 mm ==== Working Area - Stroke: 400 mm - Max. working height: 500 mm - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 600 × 500 mm - Table cut-out: 150 × 150 mm ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse: 10 mm/s ==== Hydraulics - Total power requirement: 11 kW - Retraction force: 11 t - Oil tank capacity: 250 l ==== Controls & Options - Monitor: Siemens, 7" - Option: Siemens S7-1200 control - Option: Side panels - Option: Light curtains front and rear ===== Straightening work, Assembly work, Press-fitting work, Workshop applications, Maintenance Single-column press, C-frame press, Hydraulic press, Straightening press, Workshop press, Press-fitting press, Industrial press, Tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all requirements of the national Brazilian safety directive NR 12, which builds upon them. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are predominantly equipped with components from leading European manufacturers.

Stanje: novo, stiskalna sila: 400 t, HIDRALMAC Portal Straightening Press – 400 t – Column Width 3,400 mm – Traversing Bridge For sale is a hydraulic portal straightening press manufactured by HIDRALMAC with a pressing force of 400 t. This machine is designed for heavy-duty straightening and forming tasks and features a large-sized, traversing bridge as well as a cylinder with lateral travel. Thanks to its robust construction and high flexibility, it is ideally suited for large-format workpieces and demanding industrial applications. ==== Podpfofhcc Rsx Altsgp Technical Data + Information: Hydraulic Portal Straightening Press – 400 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Portal Straightening Press - Machine designation: Straightening Press - Design: Portal Press - Pressing force: 400 t - Machine weight: approx. 49 t - Dimensions (L × W × H): 7,900 × 5,500 × 4,300 mm ==== Working Area - Column width: 3,400 mm - Max. distance table – ram: 1,000 mm - Table height above floor: approx. 700 mm - Stroke: 500 mm ==== Movement & Flexibility - Bridge travel: 5,000 mm - Lateral travel of cylinder: 2,800 mm - Bridge traversing speed: 0–33 mm/sec - Cylinder lowering speed: 0–10 mm/sec - Cylinder stroke speed: 0–25 mm/sec ==== Hydraulics & Performance - Total power requirement: 55 kW - Pump capacity: max. 131 l/min - Retraction force: 26 t - Oil tank: 700 l ==== Construction & Equipment - Reinforced table at the front section (reinforcement over 1,500 mm, additional weight approx. 4,000 kg) - Protective covers for the drive motors of the bridge - Signal lamps on both right and left with protective covers - Gratings (galvanized) inside the drip tray ==== Application & Features - Robust design for heavy straightening operations - High flexibility thanks to traversing bridge and cylinder - Suitable for large and heavy workpieces ===== Straightening work, heavy forming, large components, steel construction, mechanical engineering Hydraulic press, straightening press, portal press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German machinery directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply fully with Brazil’s national safety directive NR 12, which builds upon those standards. Our main strength lies in custom machine building and press automation. We supply tailored hydraulic presses at surprisingly attractive prices. For the hydraulic system, we primarily use components from leading European manufacturers.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, številka stroja/vozila: DF0147, Straightening Press – Manufacturer: Hidralmac – 150 t Profile Straightening Press – Servo Controlled A high-precision profile straightening press from Hidralmac with a press force of up to 150 t is available for sale. The machine features two hydraulic cylinders, a servo-driven traverse unit, as well as camera-assisted process monitoring. It is ideally suited for the precision straightening of profiles and components with strict quality requirements. ==== Technical Data & Information: Profile Straightening Press Hidralmac – 150 t Profile Straightening Press ==== General Information - Manufacturer: Hidralmac - Model: Straightening Press - Design: Profile straightening press with double cylinder - Press force: 15 – 150 t (continuously adjustable) - Machine weight: approx. 11.5 t - Space requirements: approx. 8,800 × 1,800 × 2,200 mm ==== Working Area - Cylinder diameter: Ø 100 mm ==== Hydraulics and Drive - Total power requirement: 20 kW - Servo motor: 2 kW - Cooling unit: 1 kW - Oil tank capacity: 350 l - Electric oil cooling: max. 1 kW ==== Speeds - Pressing speed: 0 – 9.9 mm/s (infinitely adjustable via joystick) - Traverse speed of clamping plate: up to 100 mm/s ==== Control and Operation - Joystick control - Monitor display with reference line and scale - Camera system for visual process monitoring - Program management for various profiles ==== Table and Clamping System - Traversable clamping plate on linear guides - Drive via chain and servo motor - Quick-adjustable holder and clamping system - Interchangeable straightening segments (10 inserts included) - Basic equipment for one profile included in delivery ==== Process Description - Positioning of the profile via clamping system - Visualization of deviation by camera system - Manual adjustment via joystick - Continuous monitoring during operation ==== Operating Conditions - Ambient temperature: 5 – 60 °C - Relative humidity: up to 90% at 20 °C / 50% at 40 °C - Installation height: up to 1,000 m above sea level - Power fluctuation: ± 10% ===== Profile straightening, precision straightening, metalworking, maintenance, serial production, quality correction, component processing Straightening press, profile straightening press, hydraulic press, servo straightening press, double cylinder press, industrial press Pgedpfxjfxygws Altjp Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which builds upon these standards. Our main strengths are custom machine design and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, stiskalna sila: 400 t, Portal Gantry Straightening Press – Manufacturer: Hidrobrasil – 400 t Gantry Press – Table size 6,000 × 3,000 mm For sale is a powerful gantry straightening press from Hidrobrasil with a pressing force of 400 t. The machine features a generous table surface of 6,000 × 3,000 mm, a movable gantry bridge as well as a laterally traversable cylinder, making it ideal for large-format straightening, assembly, and heavy-duty processing applications. ==== Technical Data & Information: Hidrobrasil Gantry Straightening Press – 400 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry Press / Double-column Press - Pressing Force: 400 t (4,000 kN) - Machine weight: approx. 52 t - Dimensions (L × W × H): 6,000 × 5,000 × 4,500 mm ==== Working Area - Table size: 6,000 × 3,000 mm - Open height: 1,500 mm - Stroke: 1,500 mm - Table height: approx. 900 mm ==== Construction & Features - Movable bridge via racks and pinions with two geared motors - Cylinder laterally movable via rack and pinion - Table in heavy-duty grid design - T-slots available per customer specification - Induction-hardened cylinder - Machine body double-painted / powder-coated - Lubrication via grease nipples - Operation via swiveling arm on the bridge - Pressure adjustment via monitor (60 – 400 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tear-out force: 600 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: 2 – 3 s (steel on steel) ==== Speeds - Pressing speed: up to 17 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 60 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 150 l/min - Working pressure: max. 280 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 Pgedpfjhyc Nwox Altop ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor output: 30 kW (IE3) - Total connected load: approx. 35 kW ==== Additional Data - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,500 mm ===== For straightening work, large component processing, heavy-duty assembly, metal forming, steel construction, tool making, maintenance, special applications. Gantry press, straightening press, double-column press, large press, hydraulic press, heavy-duty press, die spotting press, tryout press, tool try out press Looking for a hydraulic press tailored to your specific requirements? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply fully with the national Brazilian safety directive NR 12, which builds upon these standards. Our core strength lies in special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. The hydraulics on our presses predominantly feature components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, stiskalna sila: 300 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a high-performance portal straightening press from Hidrobrasil with a press force of 300 t. The machine features a movable bridge construction, a laterally movable cylinder, as well as a robust grid table design, making it ideal for precise straightening, assembly, and heavy-duty applications. ==== Technical Specifications & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double-column press - Press force: 300 t (3,000 kN) - Machine weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table size: 2,500 × 1,600 mm - Open height: 700 mm - Stroke: 700 mm - Table height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack and pinion with two gear motors - Cylinder laterally movable via rack and pinion - Table in grid construction - T-slots according to customer specification (standard: 22 mm) - Induction-hardened cylinder - Machine body double-coated - Lubrication via grease nipples - Operation via swivel arm on the bridge - Pressure setting via monitor (50 – 300 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tearing force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) Pedpfx Ash Agnueltsgp ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== More Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening work, assembly work, heavy-duty machining, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double-column press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the national Brazilian safety regulation NR 12, which is based on these. Our greatest strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we primarily use components from leading European manufacturers.

Stanje: rabljeno, Technical details: Pjdpfx Ajvb Dq Reltjgp Faceplate diameter: 4000 mm Swing diameter: 4300 mm Turning height: 330 mm Faceplate speed range: 1 – 92 rpm Workpiece weight: 18 t Feed rates: 1 – 4000 mm/min Main drive motor: 55 kW Total power requirement: 85 kVA Machine weight approx.: 64 t Space requirement approx.: 9.0 x 7.2 x 5.5 m Equipped with CNC SIEMENS 840 D With 2 vertical supports Tool base holder Chip conveyor

Stanje: rabljeno, Tehnične podrobnosti: Podow Rz U Aepfx Altjgp Premer planske plošče: 5000 mm Obhodni premer: 6100 mm Višina struženja: 2400 mm Hod vsakega drsnika: 1490 mm Dimenzije drsnika: 340 x 340 mm Maks. teža obdelovanca: 100.000 kg Skupna potrebna moč: 100 kW Teža stroja pribl.: 155 t Območje hitrosti planske plošče: 0,4 - 50 min⁻¹ z 2-osno CNC SIEMENS 840 D

Stanje: dober (rabljeno), Leto izdelave: 2007, Nova delavniška hidravlična stiskalnica Stenhoj Tip: T40 Pjdpezi Sbisfx Altogp Nosilnost: 40 ton Električni/hidravlični agregat

Stanje: dober (rabljeno), Leto izdelave: 2021, številka stroja/vozila: H 21-3743, Ponudba 26175 Tehnični podatki: - maks. stisna sila do 25 t - maks. hod bata 160 mm - vgradna višina brez ravnalne enote 675 mm - izhod do sredine bata 250 mm - velikost mize pribl. 1300 x 300 mm - delovna hitrost AB pribl. do maks. 30 mm/s - delovna hitrost do pribl. 100 mm/s - količina olja pribl. 150 l - pogon 400 V / 10 kW - dimenzije (š x v x g) pribl. 4900 x 2400 x 1500 mm - teža pribl. 3000 kg - z: - podaljšek ravnalne mize 2030 + 1520 mm - premični voziček s pritrditvami na ravnalni mizi - koničasto vpenjalo - valjčno vpenjalo Pgedpfx Alszh Edbstjp - ravnalni bat - nihajno stikalo z merilnikom ure

Stanje: dober (rabljeno), Kompletna serija ploščatih tiskarskih matric Tip: 20.305 V12 - 26 stopinj 3 x 835 mm 2 x 415 mm Pjdpfezg Urfex Altjgp Skupna dolžina: 3335 mm Nova bruto cena: € 3.862,-

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece po naročilu Država porekla: Italija Cena: 55.200 € Leasing obrok: 1.043,28 € Pritisna sila: 200 t Hod: 500 mm Miza: 1000x600 mm Vgradna višina: 640 mm Hitri pomik: 21 mm/s Delovna hitrost: 2 mm/s Motor: 5,5 kW Dolžina: 1800 mm Širina: 1300 mm Psdpeynnfiefx Altegp Višina: 2500 mm Teža: 6.400 kg 2 hitrosti Nastavljiv maksimalni pritisk Manometer

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece od naročila Država izvora: Italija Cena: 43.200 € Leasing obrok: 825,12 €/mesec Tlačna sila: 150 t Hod: 500 mm Pgjdpsynnfcsfx Altop Miza: 800 x 600 mm Vgradna višina: 630 mm Hitri pomik: 22 mm/s Delovna hitrost: 3 mm/s Motor: 4 kW Dolžina: 1.800 mm Širina: 1.200 mm Višina: 2.400 mm Teža: 4.500 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 31.400 € Leasing obrok: 599,74 €/mesec Tlačna sila: 100 t Hod: 500 mm Miza: 800x600 mm Vgradna višina: 615 mm Hitri pomik: 26 mm/s Delovna hitrost: 4 mm/s Motor: 4 kW Dolžina: 1.600 mm Širina: 900 mm Višina: 2.300 mm Pgodpfxoynnd So Altsp Teža: 3.100 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 25.000 € Pgjdpfxjynnd Es Altop Leasing obrok: 480 € Pritisna sila: 70 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 25 mm/s Delovna hitrost: 5 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2250 mm Teža: 1900 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece po naročilu Država porekla: Italija Cena: 22.900 € Leasing obrok: 439,68 € Tlačna moč: 40 t Hod: 500 mm Pjdpfx Aloynndxetsgp Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 26 mm/s Delovna hitrost: 9 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2200 mm Teža: 1300 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer