Mae Adsf 10 Rh nakup rabljenega (32.390)

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Lsdpfxot Hwwdj Al Rsrt We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 1979, Tlak 100 t Ledjy Tpr Aepfx Al Rjrt Hod 500 mm Površina mize 4000x500 mm Teža stroja ca. 5,7 t Hidravlična ravnalna stiskalnica tip HY – S 100 RH MAE komplet z ravnalno enoto Leto izdelave 1979 Pregledano po UVV Hod 500 mm Tlačna moč 100 t Miza 4000 x 500 mm Teža 5700 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document. Lrjdpfjr A Hdgjx Al Rot

Stanje: rabljeno, Leto izdelave: 2018, skupna dolžina: 5.850 mm, skupna širina: 1.730 mm, skupna višina: 1.950 mm, Naprodaj je visokokakovosten UV-brizgalni tiskalnik Durst Rho P10 200 Plus. Ta industrijski hibridni stroj združuje neprekosljivo natančnost tehnologije 10-pikolitrov in visoko produktivnost sistema, ki omogoča hitro tiskanje. Idealno za tiskarne, ki morajo prilagodljivo preklapljati med trdimi ploščatimi mediji in fleksibilnimi valovitimi materiali. Tehnične značilnosti: Vsestranski hibridni sistem: obdeluje trde medije (Forex, Dibond, akril, les) debeline do 40 mm ter fleksibilne valovite medije širine do 205 cm. Izjemna kakovost tiskanja: tehnologija Durst Quadro Array 10 zagotavlja z 10-pl kapljicami izvorno ločljivost do 1.200 dpi – idealno za tiskanje majhnega besedila in finih barvnih prehodov. Največja produktivnost: glede na konfiguracijo/način, hitrost produkcije do 350 m²/h. Barvni prostor: standardni CMYK [tukaj po potrebi dodajte posebne barve, kot so bela, svetlocijan, svetlo magenta]. Leto izdelave: [2018] Ljdpfx Ajz Dr T Sjl Rert Kdobmoy Thc Hen Niwcet Stanje: Tehnično in vizualno v dobrem stanju. Stroj je deloval izključno v eni izmeni in je bil redno vzdrževan. Razpoložljivost: takoj ali po dogovoru. Lokacija: [83410 Laufen D] Obseg dobave: osnovni stroj Durst Rho P10 200 Plus, vstopna in izstopna miza za tiskanje na plošče [neobvezno: možnost valovitega materiala / licenca za RIP-programsko opremo / dodatna oprema]. Cena: na zahtevo (plus DDV, na lokaciji, prevzem/razstavitev s strani kupca). Ogled in vzorčni tisk so na voljo po predhodnem dogovoru. Dodatne slike ali informacije na zahtevo.

Stanje: dober (rabljeno), Leto izdelave: 1991, Hydraulic horizontal straightening and bending press Lrsdpfx Aocffzasl Rot Maximum pressing force: 160 t Manufacturer: MAE, Type: HY RI 160 RH, Year of manufacture: 1991. For further technical specifications, please refer to the data sheets.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1993, obratovalne ure: 4.110 h, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), skupna masa: 2.500 kg, Residual Wood Shredder / Wood Chipper / Slow-Speed Shredder with Moving Floor Refurbished Manufacturer: WEIMA Model: WL10 Year of manufacture: 1993 Extraction port diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Hopper size: approx. 120 x 100 cm Number of blades: 24 pcs Blade dimensions: 30 x 30 mm Screen: 30 mm, incl. second screen 35 mm Dimensions (LxWxH): approx. 2.5 x 1.7 x 1.85 m Lrodpoy Ahr Hefx Al Ret Weight: approx. 2,500 kg The machine has been refurbished: - Rotor shaft newly mounted - Repainted - Moving floor slide rails replaced - Oils changed - Rotor shaft overhauled (partially new blades, holders, etc.) Condition as shown in the photos; please refer to the item description. Parts may also be collected by the buyer. All specifications are approximate. All information is provided to the best of our knowledge but is not guaranteed. Subject to prior sale. Items can be picked up by the buyer or shipped at the buyer's expense. Shipping costs are indicative and may vary depending on distance and unloading possibilities. The stated sales price is net plus VAT. An invoice with VAT will be issued. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective — for spare parts only, to commercial customers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, the warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is a business within the meaning of §14 BGB, any warranty is excluded. For new items, the warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is a business within the meaning of §14 BGB, the warranty period is 12 months.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, višina središča: 180 mm, teža obdelovanca (maks.): 200 kg, dolžina brušenja: 1.000 mm, širina na sredini: 1.000 mm, premer brusilnega koluta: 500 mm, skupna širina: 2.600 mm, skupna dolžina: 4.700 mm, skupna višina: 2.200 mm, premer brušenja: 300 mm, teža obdelovanca med konicami: 200.000 g, vrsta vhodnega toka: trifazni, premer obdelovanca med konicama: 300 mm, dolžina obdelovanca med konicami: 1.000 mm, širina brusilnega kolesa: 100 mm, največja hitrost vretena: 1.200 obr/min, hitrost vretena (min.): 10 obr/min, dolžina podajanja os X: 320 mm, dolžina podajanja os Z: 1.100 mm, hitrost pomika os X: 1.000 m/min, hitrost podajanja osi Y: 1.500 m/min, hitrost vretena za brušenje: 1.700 obr/min, skupna masa: 7.500 kg, vrtilni razpon: 30 °, trajanje garancije: 12 meseci, leto zadnje generalne obnove: 2023, vhodna frekvenca: 50 Hz, hitro pomikanje X-os: 1.000 m/min, hitri pomik na osi Z: 1.500 m/min, vhodna napetost: 400 V, Schaudt PF43 U1000, letnik 1994, nadgradnja (premium generalno obnovljen) s strani GSN v letu 2023. Siemens Sinumerik 840 D SL, malo delovnih ur, približno 3000 h po nadgradnji, vpenjalna glava MK4, konjiček MK4, Globina brušenja izvrtine: 300 mm Dolžina obdelovanca vključno s pripomočki za vpenjanje pri maks. globini izvrtine: 450 mm Dimenzije brusnega koluta: 500x100 mm Premer izvrtine: 203,2 mm Regulirana obodna hitrost obdelovanca WUG SUG zunanja cilindrična brusilna vretena: 45 m/s prosto pozicionirna, avtomatska B-os Stroj z novo popolnoma zaprto zaščitno ohišje proti škropljenju vode GSN merilna glava Diatronic 22 vklj. C2-u W-os/toren Senzor za brušenje s hidrofonom (vodni curek) vklj. nadzor trkov Konjiček z avtomatsko kompenzacijo cilindrične napake Vpenjanje/razpenjanje nastavljivo preko hidravlične vpenjalne naprave Lsdpezcfnqofx Al Rort Nadgradnja na 15" zaslon na upravljalni konzoli NETO NOVA CENA 2023: 407.432,20 € + dodatna orodja itd.

Stanje: rabljeno, Leto izdelave: 2006, Oprema: CE označba, Ponujamo rabljeno lasersko glavo iz stroja Trumpf TruWeld, ki je primerna npr. za uporabo kot rezervni del. Lsdpfx Aozyl Auel Rjrt

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: omejena funkcionalnost, skupna dolžina: 5.850 mm, skupna širina: 1.730 mm, skupna višina: 1.950 mm, For sale: highly professional UV inkjet printer Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10 picoliter technology with the high productivity of a high-speed system. Ideal for print shops requiring flexible switching between rigid board media and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick as well as flexible roll materials up to 205 cm wide. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi using 10-pl droplets – perfect for fine print text and smooth color gradients. Maximum productivity: Depending on configuration/mode, production speeds up to 350 m²/h. Color gamut: Standard CMYK [Optionally: support for spot colors such as White, Light Cyan, Light Magenta]. Year of manufacture: [2018] Condition: Technically and visually in good condition. The machine was used exclusively in single-shift operation and has been regularly maintained. Availability: From [immediately] or by arrangement. Location: [83410 Laufen, Germany] Scope of supply: - Durst Rho P10 200 Plus base unit - Infeed and outfeed tables for board printing [Optional: roll option / RIP software license / accessories on request] Price: On request (plus VAT, ex works, removal and dismantling by buyer). Lredpfxey Thc Hs Al Rjt Inspection and test printing possible on site by prior arrangement. Further images or information available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, barvni kanali: 6, število tiskalnih glav: 24, loèitev (maks.): 1.000 DPI (pik na palec), širina papirja (maks.): 3.200 mm, Tiskalnik je v odličnem stanju, še pred nekaj meseci je bil pod pogodbo z Durstom. Konfiguracija je CMYK lc lm, glave in vsi drugi deli so v popolnem delovnem stanju, tiskanje je izjemno tudi v najhitrejših načinih. Stroj deluje odlično in je zelo zanesljiv. Z napravo je priložen Rip Grand Caldera. Napravo si je mogoče ogledati in preizkusiti kadar koli. Lsdpfxexv Dx Hj Al Rert

Leto izdelave: 1991, stanje: rabljeno, Pressure: 100 t Throat depth: 380 mm Stroke: 300 mm Table area: 1700x700 mm Ram area: 1400x700 mm Installation height: 650 mm Total power requirement: 30 kW Ljdpolp U Aysfx Al Rert Machine weight approx. 10 t Space requirements approx. 2400x3600x3400 mm Pressure- and stroke-dependent shut-off BWS for safety and cycle operation Fixed stop Pressure switch Rapid approach and working stroke Two-hand operation Approved for manual loading operations

Stanje: dober (rabljeno), Hydraulic press, single-column press, C-frame press, oil-hydraulic press, hydraulic single-column press - Delivery: in as-is condition as inspected - Note: without hydraulic power unit and control system - Press force: 40 t - Piston rod: Ø 105 mm - Max. stroke: 710 mm - Mounting plate: 550 x 800 x 45 mm - Mounting plate holes: Ø 18 mm Ljdpfx Alsupbdgo Rort - Dimensions: 890/1570/H610 mm - Weight: 826 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Magnetna plošča, 1000 x 500 mm, z avtomatskim sistemom za podajanje. Ljdpfxjz Ap Dbs Al Rsrt

Stanje: rabljeno, številka stroja/vozila: 51568, Pressure: 100 t Stroke: 0–500 mm Table surface: 800 x 650 mm Ram surface: 800 x 600 mm Table through-hole: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Lrsdpfxecxxrre Al Ret Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with ram at top dead center. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 mm/s, Overrun distance: 44 mm.

Stanje: dober (rabljeno), Leto izdelave: 1998, We need to move this machine! Lrsdpfxeibzbhj Al Rot Motor Power [kW]: 150 (2x75) Number of blades per shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced / extended mounting brackets). New, square. 4 cutting edges per blade: 3 edges unused (100%) and 1 edge approximately 70% of a new edge. Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3x400V/50 Hz Rated current: 160A-200A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German In 2014, a general overhaul was carried out. A list of these parts and corresponding pictures are available on request. This machine has not been used for several years (one owner since then). Previously used for plastics, films, cardboard – RDF from selectively sorted waste. Approximate throughput of light materials as above: 1–1.5 tonnes/h. For other materials – to be checked/discussed. The machine was fully operational and is stored in a garage. Additional photos and videos available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Modular plant growth chambers Fitotron®, type HGC 1014 V including HQI-T and Krypton lighting module Temperature range -10°C to +45°C for temperature testing Lrodpfov Ivnzjx Al Rst Test chamber volume approx. 1300L Simpac control system Network connection USB interface The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as required, allowing adaptation to a wide range of applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4-plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% rH Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% rH: approx. 0.8 kW Performance data for climate tests with irradiation Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% rH Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Modular plant growth chambers Fitotron®, type HGC 1014 V incl. HQI-T and Krypton lighting module Temperature range -10°C to +45°C for temperature testing Test chamber volume approx. 1300 l Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers are based on modular construction. Individual modules can be added or replaced as needed, allowing adaptation to various applications. They are suitable for plants with high light requirements such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temperature deviation over time: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ± 3 to 5% r.h. Fresh air supply up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% r.h.: approx. 0.8 kW Technical data for climate tests with irradiation: Temperature range: +10°C to +45°C with lights on Temperature deviation over time: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ± 3 to 5% r.h. Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz Lredpov Ivn Usfx Al Rst CE marking, mobile, very good condition 50 mm pipe feedthrough Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 400 h, JLG 2646ES, dvižna ploščad tipa škarje, višina delovne platforme 10 m, leto izdelave 2005. Video lahko pošljemo preko WhatsAppa. Nenehno imamo na zalogi, glejte spletno stran. Cene so izražene za Nuland. Podjetje Van de Wert Trading B.V. ima raznoliko ponudbo strojev, tovornih vozil, prikolic in dodatne opreme. Vse naše dobave so po tržnih cenah in v stanju »takšno, kot je«, brez garancij. (glejte naše splošne pogoje) Za ogled in/ali preizkusno vožnjo se lahko dogovorite za termin. Pokličite nas predhodno, saj nismo vedno prisotni. Lredpfx Alezyavis Rjt Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 011001, Format knjige (neobrezan): Maksimalna dolžina hrbta knjige: 350 x širina knjige (sprednji rob): 320 mm Lrjdez D U Hnepfx Al Rjt Omejitev: Maksimalna razdalja od sredine navzgor ali navzdol: 175 mm Minimalna dolžina hrbta knjige: 148 x širina knjige (sprednji rob): 105 mm Omejitev: Minimalna razdalja od sredine navzgor ali navzdol: 74 mm Format knjige (obrezan): Maksimalna dolžina hrbta knjige: 340 x širina knjige (sprednji rob): 300 mm Omejitev: Maksimalna razdalja od sredine navzgor ali navzdol: 170 mm Minimalna dolžina hrbta knjige: 145 x širina knjige (sprednji rob): 101,6 mm Omejitev: Minimalna razdalja od sredine navzgor ali navzdol: 72,5 mm Širina obrezovanja: Sprednji rob: Maks. 110 mm / Min. 1 mm Zgornji in spodnji rob: Maks. 80 mm / Min. 1 mm Višina obrezovanja: 1 do 65 mm Teža knjige: Hitrost transporta, stopnja 7: 2,8 kg ali manj Hitrost transporta, stopnja 6: 4,0 kg ali manj Hitrost transporta, stopnja 5: 5,2 kg ali manj Višina drsnika v podajalnem območju: 56 mm Sistem preše in tlačna sila: Servomotor 2 kN do 8 kN Hitrost proizvodnje: 400 do 1.000 ciklov na uro

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 1.300 h, JLG 2646ES, dvižna platforma tipa škarje, višina dviga 10 metrov, leto izdelave 2006 / 1300 ur. Video je možno poslati preko WhatsAppa. Nenehno razpoložljiva zaloga, glejte spletno stran. Cene so navedene iz Nulanda. Podjetje Van de Wert Trading B.V. ima spreminjajočo se zalogo strojev, tovornjakov, priklopnih vozil in dodatne opreme. Vse naše dobave so po trgovskih cenah in v stanju "kot je", brez garancij. (glejte naše splošne pogoje) Lrjdpfxoz A Ak Sj Al Ret Za ogled in/ali testno vožnjo lahko brezplačno dogovorite termin. Predhodno pokličite, saj nismo nenehno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Lredpfxsv I Eq So Al Ret Additional accessories available on request At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 80.614 km, moč: 132 kW (179,47 KM), prva registracija: 12/2004, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 47.600 mm, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 3, število sedežev: 2, skupna dolžina: 84.850 mm, Leto izdelave: 2004, Oprema: ABS, = Dodatne možnosti in dodatna oprema = Ostalo Lrodpfxszivkns Al Rst - Radio/predvajalnik CD-jev - Os za priključne stroje Drugo - Signalna raketa = Dodatne informacije = Splošne informacije Število vrat: 2 Kabina: enojna Registrska številka: 2DAB315 Tehnične informacije Prostornina motorja: 4.250 cm³ Sprednja os: krmilna Zadnja os: z dvojnimi pnevmatikami Teže Lastna teža: 9.990 kg Dovoljena nosilnost: 3,5 kg Največja dovoljena masa: 13.500 kg Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Na zahtevo = Informacije o podjetju = Če imate kakršna koli vprašanja ali predloge, nas kontaktirajte. Zagotavljamo odgovor v 8 urah. Cene so brez DDV. Iz podanih informacij ni mogoče pridobiti nobenih pravic. Telefonska številka pisarne: MOB: Nizozemščina – angleščina – nemščina – francoščina – španščina – italijanščina) Na voljo na WhatsAppu in Viberju. MOB: Nizozemščina) Na voljo na WhatsAppu in Viberju. Pri plačilu z bančnim nakazilom je treba sredstva nakazati na naš bančni račun, ki je naveden spodaj. Vedno preverite podatke o plačilu, ki so navedeni na naši spletni strani. Če ste prejeli druge informacije, nas kontaktirajte. Če imate kakršne koli dvome, nas pokličite, da lahko preverimo račun in/ali plačilo. Bančni podatki: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/DDV/DAVČNA ŠTEVILKA: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1975, Three-roll plate bending machine, manufacturer Kramer, type RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Lodpfoww I Tmsx Al Rjrt

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 515xxxxxxxx, Leto izdelave: 1998, obratovalne ure: 58.791 h, nosilnost: 1.000 kg, dvižna višina: 3.200 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.020 mm, dolžina vilic: 1.000 mm, lastna masa: 1.545 kg, skupna dolžina: 1.611 mm, vrsta pogona: Elektro, gradbena širina: 980 mm, Električni 3-kolesni viličar Številka šasije: 515xxxxx Težišče: 500 ISO razred: ISO razred 2 = 1.000 – 2.500 kg Lrjdpfszif R Rsx Al Ret Tip dvigala: Duplex Menjalnik: Impulsni Stanje: Omejeno delujoč Tehnično stanje: normalno Tip sprednjih gum: Polna guma Tip zadnjih gum: Polna guma Napetost baterije: 24V Tip baterije: PzS Opis: Naprava je uporabna, vendar se prodaja v stanju, kot je bila vrnjena s strani stranke. Naprava ima pomanjkljivosti in se prodaja brez kakršnekoli garancije ali odgovornosti za napake. Viličar NI obnovljen in NI UVV-preverjen. Prodaja SAMO trgovcem! Impulzno krmiljenje, poln prosti dvig, hidravlično krmiljenje, števec delovnih ur, nadzor praznjenja, baterija 24 voltov (leto izdelave, kapaciteta in teža neznani), ustrezen zunanji polnilnik.

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 1.080 h, JLG 2646ES – dvižna platforma tipa škarje, višina delovne platforme 2006 / 1080 ur, 10 m. Video lahko pošljemo prek WhatsAppa. Nenehno imamo na zalogi, glejte spletno stran. Cene so navedene za Nuland. Ljdsz A Ak Ejpfx Al Rort Van de Wert Trading B.V. ima na voljo različne stroje, tovornjake, prikolice in dodatno opremo. Vse naše dobave so po trgovskih cenah, v stanju »kot je«, brez garancij. (glejte naše splošne pogoje) Za ogled in/ali preizkusno vožnjo se lahko dogovorite za termin. Prosimo, pokličite nas predhodno, saj nismo vedno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland