Trivaljna valjčna stiskalnica

Kramer RH II 80/1000

Stanje: zelo dobro (rabljeno), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has hardly been used. TECHNICAL DATA Bwsdou Hanyjpfx Afnoi Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 1, dolžina brušenja: 1.000 mm, širina brušenja: 600 mm, Horizontal Surface Grinding Machine Geibel & Hotz FS 1050 SD Grinding area: 1000 x 600 mm Fine-pole magnetic chuck Numerous flanges and wheels Large paper band filter Adjustable levelling feet Wiring diagram & circuit diagram Balancing scale The machine was used a maximum of 2 days per week – not used for serial production. Price: ex works – unpacked – uninsured Availability: immediately – subject to prior sale Bjdpsv U Dfuefx Afnowi Errors excepted – technical data non-binding

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Bwjdpfjfxyhfex Afnji Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, Length: 1900 mm Width: 810 mm Height: 860 mm Internal dimensions (LxWxH): 1.5 x 0.74 x 0.78 m Bwsdpfxogvqz Ij Afnei Machine weight: approx. 200 kg Space requirement: approx. 1.9 x 0.81 x 0.86 m For collecting and disposing of bulk materials and industrial waste - Tipping container – forklift attachment for in-plant storage of bulk materials - Powder-coated in standard colours: RAL 5010 blue, RAL 6011 green, or RAL 7016 anthracite grey / special paint finish available on request - Tipping mechanism with base plates for swivel and fixed castors - Drain fixture - Sturdy base frame with fork entry pockets - Favourable load centre - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Bwodpfx Aedzqblsfnji Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 390 mm, višina središča: 310 mm, skupna masa: 61 kg, vhodna napetost: 230 V, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 3.500 obr/min, nosilec vretena: MK 2, moč: 0,75 kW (1,02 KM), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Edge of the tool rest made from hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejection pin and key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Simple assembly of accessories: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The mid-size LAGUNA 1216 wood lathe is distinguished by its robust components: cast-iron headstock, tailstock, precisely ground bed, and tool rest with a hardened steel edge for increased durability. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50–525, 325–1750, 650–3500 rpm. Infinitely variable speed control via the Duralumin dial, and switching between three gearing ranges using a simple lever mechanism. The advanced motor technology ensures high torque, even at low speeds. Tailstock locking at the rear: unobtrusive during operation but always within easy reach. Ergonomic handles with eccentric locking for secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50–525, 325–1750, 650–3500 rpm Bwodpfjtuuv Njx Afnei • Max. working diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest post diameter: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Shipping weight: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Drive center • Live center • Faceplate • Tool rest • Ejection pin with brass tip • Spindle locking key

Stanje: rabljeno, Leto izdelave: 1980, PIPE BENDING MACHINE LANG TYPE EL90 Ø 90 Bjdpfx Aerq D N Rofnowi

Leto izdelave: 1976, Stanje: dober (rabljeno), Bandwidth: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Bwjdpfx Afobh Ubwenji Coil weight: 12.5 t Mandrel Ø: 508 mm

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Bwodpfxsu Hag No Afnsi Control system: FANUC Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Bsdpok Sat Dsfx Afnewi Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++