Kupfermuhle 50 Štiristranski Debelnik nakup rabljenega (34.870)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7186 TECHNICAL SPECIFICATIONS - Max planing width: 510 mm - Max planing height (double-sided): 170 mm - Max planing height (four-sided): 100 mm *Upper section: - toothed feed-in shaft - pawls - toothed feed shaft - pressure roller - 510 mm planer shaft, 4-knife (2 knives installed), 4 kW - smooth outfeed shaft *Lower section: - guide bar - slip roller – height-adjustable table with roller - 510 mm planer shaft, 2-knife, 4 kW - 2 smooth, adjustable slip shafts *Rear section: - 2 side spindles + pressure device - 1) right vertical 100 mm, 2.35 kW - 2) left vertical 100 mm, 2.35 kW - spindle diameter: 35 mm - spindles adjustable vertically and horizontally - manual thickness adjustment Ljdpfxex Sx S Ne Al Nehf - 4 feed speed settings - feed motor: 1.5 kW - dimensions (L x W x H): 1940 x 1320 x 1140 mm - weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring boards, etc. – Produced by the German brand KUPFERMUHLE – Used planer, in very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), CATALOGUE NUMBER 7134 Lhodsymfazopfx Al Nof TECHNICAL DATA - Maximum planing width: 500 mm - Maximum planing height: 190 mm Top side: - anti-kickback fingers - powered feed roller, sequential - 2 rows of pressure rollers - powered infeed roller, sequential - 500 mm planing cutterblock, 4-knife, 7.5 kW motor - pressure rollers - powered outfeed roller, smooth - outfeed pressure roller Bottom side: - adjustable infeed table with pressure roller - smooth sliding roller - 500 mm planing cutterblock, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - side pressure roller Rear side: - side spindles 1) right vertical 140 mm, 4 kW 2) left vertical 140 mm, 4 kW - spindle diameter: 40 mm - spindles adjustable vertically and horizontally - stepless feed speed adjustment: 8-30 m/min - electric table height adjustment - extraction port diameters: 2x145 mm, 2x160 mm - dimensions (L/W/H): 2050x1700x1700 mm - weight: 2100 kg ADVANTAGES – ideal for parquet production – electric table lifting – manufactured in the Czech Republic – used planer, very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on 4.2 EUR exchange rate) (Prices may vary depending on currency fluctuations)

Stanje: zelo dobro (rabljeno), max planing width 770 mm max planing height 200 mm additional 5th spindle 220 mm Lhodpfsv H U Nbsx Al Nof

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 860 mm, višina skobljanja: 230 mm, Petosni Kupfermuhle Ljdpfx Aljxliccj Njhf Višina skobljanja obojestransko do 230 mm, štiristransko do 200 mm z dodatnim odsesovalnim pokrovom in osjo. S standardnim odsesovalnim pokrovom in osjo do višine 125 mm Spodnja os: 15 kW Zgornja os: 22 kW Dodatna spodnja os: 11 kW Leva os: 11 kW Desna os: 11 kW Motor za podajalnik: 18 kW Spodnja in zgornja os sta opremljeni z ravnalnikom Podajalna hitrost 20-130 metrov na minuto Prejšnji lastnik je izvedel celovito obnovo stroja, mi pa smo ga občasno uporabljali 2 leti.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 2.050 mm, vrsta nastavitve višine: pnevmatičen, višina skobljanja: 300 mm, 4-sided planer, working width: 2200 mm mounted on a rotary table for curved workpieces Lhsdpfsw A A Ebsx Al Nof machine is enclosed

Stanje: skoraj kot novo (rabljeno), Spare parts + accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kupfermühle Lhjdpfxslifbdj Al Nef Rex Cook Bolinders Dimter GreCon Just inquire.

Stanje: rabljeno, Leto izdelave: 1988, Širina skobljanja: 860 mm. Maks. prehodna višina: 200 mm. Min. prehodna višina: 3,0 mm. Spodnji motor: 18,5 kW. Zgornji motor: 7,0 / 10,0 kW. Lokacija skladišča: Nattheim. Lsdpfx Alovvkc Aj Nohf

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 Lsdpfsyzulwsx Al Nohf ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7618 TEHNIČNI PODATKI - širina valja: 500 mm - število nožev: 4 kos - največja debelina obdelovanca: 230 mm z zgornje strani: - zaporne ročice - zobati, vlečni, vrtljivi, sekvenčni dovajalni valj Lhsdeymnm Dopfx Al Nsf - pritiski - skobeljni valj - pritisk - izhodni gladki vlečni valj z spodnje strani: - 2 drsni valjčki v mizi - motor: 5,5 kW - ročno dviganje mize - 2 hitrostni pomiki: 7,5 in 13 m/min - premer izsesa cevi: 160 mm - mere (d/š/v): 1100x1000x1200 mm - teža: 600 kg PREDNOSTI – izdelano v Italiji – ni prebarvana – rabljena debelinka v zelo dobrem stanju Neto cena: 15.900 PLN Neto cena: 3.780 EUR po trenutnem tečaju 4,2 EUR (Cene se lahko spreminjajo zaradi večjih nihanj tečaja)

Stanje: zelo dobro (rabljeno), CATALOGUE NUMBER 7966 Lsdey Dumtopfx Al Nohf TECHNICAL DATA - Maximum planing width: 770 mm - Maximum planing height (double-sided): 200 mm - Electric table height adjustment (up/down) - Maximum planing height (four-sided): 180 mm Top section: - Feed-in shaft with toothed infeed roller - Kickback protection - Pressure beam - 2 toothed feed rollers (first sequential) - Pressure beam - 770 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth feed-out roller Bottom section: - Guide rail - Split, smooth sliding roller - 770 mm, 4-knife planing shaft, 5.5 kW - 2 smooth feed rollers Rear section: - 2 side spindles + pressure 1) right vertical spindle 180 mm, 5.5 kW 2) left vertical spindle 180 mm, 5.5 kW - Spindle diameter: 30 mm - Spindles adjustable up/down, right/left - Manual planing width adjustment - 4 feed speeds: 6/9/12/18 m/min - Feed motor: 2.4 kW - Extraction nozzle diameter: 160 mm, 180 mm, 2 x 120 mm - Dimensions (L/W/H): 2600 x 1700 x 1650 mm - Weight: approx. 3000 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – German-made, KUPFERMUHLE brand – Includes 2 units of side spindle heads – 2 horizontal planing shafts + 2 vertical spindles – Used planer, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (depending on the EUR 4.2 exchange rate) (Prices may change with greater rate fluctuations)

Stanje: zelo dobro (rabljeno), Catalogue number 7275 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height: 200 mm From above: - Feed roller, toothed - Anti-kickback fingers - 2 pressure rollers - Feed roller, toothed - Pressure roller - 610 mm planing head, 4-knife, 7.5 kW - Pressure rollers - Feed roller, smooth From below: - Guide bar - Adjustable infeed table with split smooth sliding roller - 610 mm planing head, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure From the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Maximum planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle 160 mm, adjustable up/down + left/right + angle, approx. 4 kW - Possibility to plane with additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers in lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction nozzle diameter: 120 mm - Dimensions (L/W/H): 2550 x 1700 x 1350 mm Lhedpfxjytdkxs Al Nef - Weight: approx. 3000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, flooring, etc. - 2 horizontal planing heads + 2 vertical spindles + 1 horizontal spindle - Cutterheads included - German-made, brand KUPFERMUHLE - Used planer in very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (depending on 4.2 EUR rate) (Prices may vary depending on exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7662 TEHNIČNI PODATKI - maks. širina obdelovanca: 770 mm - maks. debelina obdelovanca: 200 mm *zgoraj - zobati pogonski valj - zapahi - pritisni valj - 2x zobati pogonski valj - pritisni valj - štirinožni skobeljni valj 770 mm, 7,5 kW - pritisni valj - gladki pogonski valj *spodaj: - nastavljiva vhodna miza - nastavljiv gladki pogonski valj - štirinožni skobeljni valj 770 mm, 5,5 kW - 2x nastavljivi transportni valj v spodnji mizi - električna nastavitev višine - motor za dvigovanje cca 1,5 kW - 6 hitrosti podajanja: 6, 9,5, 12, 15, 19, 30 m/min - podajalni motor 3,2 kW - premer odsesovalnega nastavka: 1x160 mm, 1x200 mm - dimenzije d/š/v: 1470x1800x1700 mm - teža cca 2500 kg PREDNOSTI – nemška proizvodnja – zelo dobro stanje – rabljena skobeljnica Neto cena: 36.900 PLN Ljdpjx Thcmefx Al Njhf Neto cena: 8.780 EUR Neto cena izračunana na osnovi tečaja 4,2 PLN/EUR (v primeru večjih nihanj tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7503 TECHNICAL DATA: Lodpfx Aoyz Sfbol Njhf - Max planing width: 610 mm - Max planing height (double-sided): 200 mm - Max planing height (four-sided): 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - 1 metal feed roller - Toothed infeed roller - Pawls - Pressure element - 2 toothed feed shafts - Pressure element - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure element - Smooth metal feed roller - Pressure element - Profiling spindle, 7.5 kW - Pressure element - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, shaft length 130 mm, 2.2 kW - 2 guide rails - Infeed table - Smooth feed shaft - 610 mm, 4-knife planing shaft (currently 2 knives installed), 7.5 kW - 2 smooth feed shafts - Split metal sliding roller - Side pressure element Rear section: - Side spindles + 2 pressure elements 1) Right vertical spindle 95 mm, 4 kW 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down and left/right - Adjustable rollers in lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction connection diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight: approx. 3500 kg ADVANTAGES: - The best wide planer for both wet and dry wood - Perfect for processing beams, floorboards, etc. - Additional profiling shaft and pre-cutter - 4 horizontal planing shafts + 2 vertical spindles - Manufactured by the German brand KUPFERMUHLE - Used planer, condition: very good Net price: 66,900 PLN Net price: 15,930 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant currency fluctuations)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7606 Tehnični podatki: - širina valja: 500 mm - število nožev: 3 kos - zaščita za valj Ledpfxsyg Izno Al Nehf - dolžina miz: 2530 mm - litoželezne mize - obe mizi nastavljivi - originalno litoželezno vodilo nastavljivo pod kotom - motor: 3 kW - mere d/š/v: 2530x1000x1100 mm - teža: 920 kg PREDNOSTI – italijanska proizvodnja – 3-nožni valj – rabljeni skobeljni stroj – zelo dobro stanje Neto cena: 8.900 PLN Neto cena: 2.100 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (ob večjih nihanjih tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), Catalogue Number 7641 TECHNICAL SPECIFICATION - Max. planing width: 800 mm - Max. planing height: 200 mm From above: - Powered, toothed infeed roller - Pawls - Pressure unit - 2 powered, toothed feed rollers - Pressure unit - 800 mm, 4-knife planing shaft – 7.5 kW - Pressure units - 800 mm, 4-knife profiling shaft (equipped with 3 straight knives, 1 profiling knife) - Pressure unit - Smooth, powered outfeed roller From below: - Guide rail - Infeed table - Smooth feed roller - 800 mm, 4-knife planing shaft – 7.5 kW - 2 smooth feed rollers - Split, smooth sliding roller - Lateral pressure at outfeed From the rear: 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW Lodpsyqt Iusfx Al Nshf 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles are alternately positioned - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle 350 mm, adjustable up/down + right/left – 5.5 kW - Spindle diameter: 40 mm At outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3 × 180 mm, 130 mm - Dimensions (L×W×H): 3100 × 2000 × 1900 mm - Weight: approx. 3500 kg ADVANTAGES – Top-performing wide planing machine for wet and dry wood – Perfect for beams, flooring, etc. – 3 planing shafts + 3 spindles – Made by KUPFERMUHLE – German manufacture – Used planer, in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR rate) (Prices may vary depending on currency fluctuations)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height (double-sided): 200 mm - Electric table adjustment up/down - Maximum planing height (four-sided): 100 mm – Top section: - Feed-in roller, toothed Lhodpfxeyyyi Eo Al Nsf - Kickback devices - Pressure unit - 2 feed rollers, toothed - Pressure unit - 610 mm, 4-knife planing cutterhead, 7.5 kW - Pressure unit - Outfeed roller, smooth – Bottom section: - Guide bar - Feed roller, toothed - 610 mm, 4-knife planing cutterhead, 5.5 kW - 2 smooth feed rollers – Rear section: - 2 side spindles + pressure unit 1) Right vertical 100 mm, 4 kW 2) Left vertical 100 mm, 4 kW - Spindle diameter: 35 mm - Vertical spindles adjustable up/down, right/left - Manual planing width adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Dimensions (LxWxH): 2500x1800x600 mm - Weight: approx. 3000 kg ADVANTAGES – Ideal for log processing, flooring, etc. – Made in Germany by KUPFERMUHLE – 2 horizontal cutterheads + 2 vertical spindles – Used planer in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), Kataloška številka 6309 TEHNIČNI PODATKI RAVNALKA: - širina valja 510 mm - valj s 3 noži - vodilo nastavljivo pod kotom - dolžina miz 1910 mm - obe mizi nastavljivi DEBELINKA: - maks. debelina obdelovanca na debelinki 200 mm Lsdpfxoyyymke Al Nohf - zaščita valja debelinke z zgoraj: - zapah - vstopni pogonski valj, zobati - skobeljni valj - izstopni pogonski valj, gladek - brezstopenjska nastavitev hitrosti pomika 7-14 m/min - glavni motor cca 4 kW - vrtljaji valja 3000/6000 - mere d/š/v 1910x870x970 mm - teža 780 kg – izdelano v Italiji – zelo dobro stanje, rabljeni stroj Neto cena: 14.500 PLN Neto cena: 3.450 EUR Neto cena obračunana po tečaju 4,2 PLN/EUR (ob večjih valutnih nihanjih se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA: 6507 TEHNIČNI PODATKI SKOBELNIK: - širina valja: 510 mm Lhodpfxjx Swqke Al Nof - valji v spodnji mizi - originalno litoželezno vodilo, nastavljivo pod kotom - dolžina miz: 1810 mm - obe mizi nastavljivi DEBELINKA: - največja debelina obdelovanca na debelinki: 200 mm - zaščita za valj debelinke ZGORAJ: - zapah - podajalni pogonski zobati valj - pritisk - skobeljni valj PRITISK - izhodni pogonski gladki valj SPODAJ: - 2 nastavljiva valja v spodnji mizi - 2 hitrosti podajanja - glavni motor: 2,95 kW - mere dolžina/širina/višina: 1940x1200x1120 mm - teža: 970 kg Cena brez DDV: 13.900 PLN Cena brez DDV: 3.300 EUR Cena izračunana po tečaju 4,2 PLN/EUR (pri večjih nihanjih tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), Catalogue number: 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer in very good condition TECHNICAL DATA - Max planing width: 610 mm - Max planing height: 200 mm - Top section: - Geared infeed roller - Kickback fingers - Pressure beam - 2 geared feed rollers - Pressure beam - Planing shaft: 610 mm, 6 knives, 15 kW - Pressure beams - Outfeed smooth feed roller - Bottom section: - Side pressure at infeed Ledoyaq Taepfx Al Nshf - Guide rail - Infeed table - Geared feed roller - Planing shaft: 610 mm, 6 knives, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear section: - 2 side spindles + pressure systems: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW (electronically adjustable left/right) - Spindle diameter: 40 mm - Spindles adjustable alternately - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 160 mm, adjustable up/down + left/right, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal idler rollers, 2 lower rubber-driven rollers - Adjustable rollers in lower table - Electric adjustment of planing height - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (subject to 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Zwick/Roell universal testing machine RetroLine 50 kN (Z050/TH), year of manufacture 2021, upgraded as part of a RetroLine retrofit. The machine was used in ongoing operation and is technically fully functional. Thanks to modernization with RetroLine tC II and regular maintenance, the system is ready for immediate use. TECHNICAL DATA: Maximum force: 50 kN Testing speed: 0.001 – 500 mm/min Test space height: approx. 1380 mm Test space width: approx. 440 mm Measurement acquisition: 400 kHz Measured value transmission: 500 Hz (optionally up to 2000 Hz) Interface: Ethernet EQUIPMENT: Xforce load cell Type P (Precision), including calibration certificate Accuracy class 1 according to ISO 7500-1 from 200 N Accuracy class 0.5 from 1000 N Extensometer / measurement sensor Clamping tools / grips Ball screw spindles Adapter bolts 36 mm SPECIMEN HOLDERS: Wedge screw specimen holders up to 50 kN Symmetrical and asymmetrical clamping Temperature range: -40 °C to +250 °C Jaw inserts (steel, 1 set = 4 pieces) Chevron serration 0.75 mm Dimensions: 80 x 60 mm Including specimen stop SOFTWARE: testXpert III (master test method, 3rd license) Including layout, result, export, channel, protocol, and organization editor Including Virtual Testing Machine (VTM) PC system: DELL with touch monitor CONDITION: Used, technically functional, good overall condition. Machine was in operation until recently. SERVICE: Fully maintained and calibrated (2022 / 2023 / 2024 / 2025) Lhedpfx Asy Attvsl Nsf SCOPE OF DELIVERY: Zwick/Roell RetroLine 50 kN testing machine PC system with testXpert III software 50 kN load cell Extensometer / measurement sensor Clamping tools / grips Documentation Dossier: DO737620 Article ID: 25131 Inspection possible by appointment. Subject to changes and errors.

Stanje: dober (rabljeno), Tehnični podatki za prečko paletnega regala: Regalni sistem: META Thyssen V obsegu dobave je vključeno: 01x prečka paletnega regala, rabljena Barva materiala: rumena Tip prečke: HN 100|20 Škatlasti profil: 100 x 50 mm Agrafa: 3 HK (kavlji) Svetla razdalja: 3.600 mm 02x varnostni zatiči, rabljeni Izvedba: v celoti pocinkani Za zavarovanje vzdolžnih nosilcev proti nenamernemu dvigu Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Za dodatni prevoz ali pošiljanje tega artikla nastanejo dodatni stroški, ki jih lahko individualno preverite glede na kraj dostave oziroma obseg pri nas. Lhjdjy Akh Ropfx Al Nef

Stanje: dober (rabljeno), Ponujam industrijsko vertikalno črpalko priznanega nemškega proizvajalca ALLWEILER GmbH – model NLT 50-200. Črpalka je namenjena za neprekinjeno obratovanje v industrijskih, vodnih in tehnoloških sistemih. Oprema je popolna z električnim motorjem. Rabljeno stanje – vidni sledovi skladiščenja in rahla površinska korozija. ⚙️ Tehnični podatki proizvajalec: ALLWEILER (Nemčija) tip: NLT 50-200 leto izdelave: 2014 zmogljivost: 75 m³/h črpalna višina: 48 m število vrtljajev: 2900 obr/min moč motorja: 11,6 kW napajanje: 400V (50 Hz) 460V (60 Hz) premer priključka: pribl. 65 mm Lhodeyxtfwopfx Al Njf izvedba: vertikalna (vertical inline pump) ✅ Tehnično stanje črpalka kompletna z motorjem ni vidnih mehanskih poškodb prosto se vrti vizualno stanje kot na slikah (sledovi skladiščenja, površinska rja)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 600 mm, skupna masa: 3.000 kg, Štiristranski skobeljni stroj Lsdpey At D Ujfx Al Nehf Proizvajalec: Kupfermühle Tip: Vuin 605 Širina skobljanja: 600 mm Maksimalna višina skobljanja: 200 mm Višinsko nastavljiva miza Podajanje stopničasto nastavljivo 2 izhodni valji Obratovalna napetost: 380 V Krmilna napetost: 220 V Frekvenca: 50 Hz Skupni obratovalni tok: 60 A Skupni krmilni tok: 6 A Transportne mere: Stroj pribl. 2000 x 1800 x 1800 mm + paleta z dodatki 1200 x 800 x 500 mm Skupna teža pribl. 3000 kg

Stanje: rabljeno, Anzahl 1x Aufnahme VDI 50 Schaftdurchmesser 50 mm Aufnahme Capto C5 Drehmoment max. 100 Nm Max. Drehzahl 4.000 min/-1 Gewicht 19,7 kg angetr. Werkzeug WTO 410505081-50 - Winkel-Bohr-Fräseinrichtung - zurückgesetzt - mit Coromant Capto C5 - interne und externe Kühlmittelzufuhr - Max. Kühlmitteldruck: 80 bar ---- MASCHINENVERWENDUNG ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Scheibenrevolver DMG CTX gamma VDI50 Scheibenrevolver EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline Lodjyycwropfx Al Nehf SAUTER Scheibenrevolver VDI 50, DIN 5480, rechts VICTOR VTurn-36/40/45/46CV (DIN5480) - Maschinenschnittstelle: VD50A - Antriebskupplung: DIN5480 - i (n1:n2): 1:1 - Drehrichtung: gleich - Kühlmittelzufuhr: IK 80 bar - Funktionslänge LF: 124 mm - Auskraglänge LPR: 183 mm - Funktionsbreite WF: 34,75 mm

Stanje: rabljeno, Število 1x Vpenjalni sistem VDI 50 Premer stebla 50 mm Vpenjalni sistem Capto C5 Ljdpfeyycwlex Al Njhf Največji navor 100 Nm Največja hitrost vrtenja 6.000 min-1 Teža 19,5 kg Pogonsko orodje WTO 410105085-50 - Vrtalno-rezalna enota - Ravna z zamikom - s Coromant Capto C5 - notranji in zunanji dotok hladilne tekočine - Maks. tlak hladilne tekočine: 80 bar ---- UPORABA STROJA ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 diskasti revolver DMG CTX gamma VDI50 diskasti revolver EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, revolver desno SAUTER diskasti revolver VDI 50, DIN 5480, desno VICTOR VTurn-36/40/45/46CV (DIN5480) - Vmesnik stroja: VD50A - Pogonska sklopka: DIN5480 - i (n1:n2): 1:2 - Smer vrtenja: neskladna - Dotok hladilne tekočine: IK 80 bar - Funkcijska dolžina LF: 160 mm - Konzolna dolžina LPR: 160 mm - Funkcijska širina WF: 75 mm