Kubota V3307Cr-T. Brand New And Complete. Tier 4 Epa A... nakup rabljenega (124.012)

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Moč: 6 kW (8 KM) Cedpfjy Am U Tex Aahorg

Stanje: novo, Leto izdelave: 2025, moč: 55 kW (74,78 KM), vrsta goriva: dizel, Družinsko ime: PKBXL03.3E1D Crodpfoy Anakjx Aahjg Približna teža v kg: 354 kg Dimenzije D x Š x V: 100 x 80 x 110 cm

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Moč: 4 kW (5 KM) Crodpey Am Tpofx Aaheg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100.000 kg, Linija za proizvodnjo peletov, italijanske izdelave. Uporabljene so priznane blagovne znamke strojev, kot so General Dies SRL, Miller SRL, FIDA SRL in druge. Kapaciteta linije: 1,3 tone na uro Pralna stiskalnica peletov General Dies TAU4 – 110 kW Kontejner s pomičnim dnom in hidravlično agregatno enoto Rotacijski sušilnik s tremi kanali, katalogska kapaciteta 2,5 tone (dejanska kapaciteta do 1,5 tone/uro) Transportni razdelilnik za ločevanje biomase Pezzolato PTH 660/700 (sekalnik lesa, po želji kupca ga je mogoče odstraniti iz linije) Kotel za sušilnik in dodatna oprema Crsdpoi Akrksfx Aaheg Drobilnik „Miller SRL“ – 75 kW Transportni tekoči trak za transport biomase Ciklon za odstranjevanje prahu Hladilni silo za odstranjevanje prahu Tehtalna in embalažna naprava Električne omarice za celotno linijo, vključno s kabli Ventilacijske cevi za transport žagovine in lesnih sekancev Vijačni kompresor, 860 l Črpalka za dovod maziva v osrednji sistem za mazanje stiskalnice Dodatno so vključeni tudi drugi deli opreme, kot so filtri, kovinske povezave itd. (Celotna linija obsega skupno približno 4 do 5 tovornjakov, polnih opreme.)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Kompletna linija za polnjenje steklenic za neaseptično mleko in druge mlečne izdelke Kapaciteta: 270, 540 ml PET/plastične steklenice s pokrovom D-38 mm Velikost steklenice: 270 ml: D-60 mm, V-132 mm 540 ml: D-70 mm, V-180 mm Zmogljivost: 270 ml: 2500 steklenic na uro 540 ml: 2000 steklenic na uro Proizvajalec: SELO, Nizozemska Leto izdelave: 2014 Sestava: 1. 2x akumulacijski mizi Crsdpfx Asyiptqsahjg Premer 150 cm Motorizirani 2. Rotacijski pralnik steklenic Kapaciteta 15 steklenic Siemens Logo TD zaslon na dotik Z vključenim transporterjem 3. Selo 6-glavna polnilka 6-glavna popolnoma avtomatska polnilna postaja S Selo tlačno posodo Upravljanje preko Schneider zaslona na dotik Črpalka in pripadajoča cevna povezava 4. Zapiralec Rotacijski 3-glavni Popolnoma avtomatski zapiralec steklenic z mobilnim zalogovnikom pokrovčkov/Swan Neck podajalnikom 5. Albertina/Etipak linijski etikator 6. Pripadajoči transporterji KOT NOVA, v odličnem stanju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 440 C, year of manufacture 2015: Configuration: - Infeed fence adjustable via servomotor - Pre-milling unit adjustable manually - Edge banding unit with EVA adhesive / Airtec System Schugoma - Pressure zone for material adjustable manually Cjdpewun Irofx Aahorg - End trimming saws adjustable pneumatically - Top and bottom radius milling adjustable via servomotor - Two-motor corner rounding unit adjustable manually - Radius scraper R2 switchable pneumatically - Flat scraper switchable pneumatically - Polishing brushes - Separator and cleaning spray units at infeed and outfeed - Control panel Working height adjustable via servomotor Material thickness: 8-60mm Edge material thickness: 0.4-8mm Feed speed: 11 m/min Total length including infeed table: 5573mm Total weight: 1860kg Only 592,198 meters processed. Very good condition, fully functional! Complete documentation and CE certificate included. Available immediately.

Leto izdelave: 2018, obratovalne ure: 3.550 h, stanje: dober (rabljeno), vrsta goriva: dizel, Kubota RTVX900 UTV Gator 4X4 Diesel s hidravlično nagibno keso, letnik 2018, 3550 ur Video je na voljo preko Whatsapp. Stalna zaloga, oglejte si spletno stran. Cene so EXW Nuland. Van de Wert Trading B.V. ima spremenljivo zalogo strojev, tovornjakov, prikolic in dodatkov. Vsa naša dobava je po trgovskih cenah, v stanju AS-IS brez garancije (glejte naše splošne pogoje). Za ogled in/ali testno vožnjo lahko brez zaveze rezervirate termin. Prosimo, pokličite vnaprej, ker nismo vedno prisotni. Csdjyt Nr Uepfx Aaherg Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Brandt Optimat KDF 420 robna lepilka Cedpfx Aasx Dzw Noherg Krmilnik Powercontrol PC 20 Debelina nalepka 0,4-8 mm Višina obdelovanca 8-60 mm Predhodna obdelava z DIA rezkarji Odbijanje robov Ravno in radijsko rezkanje Radijski strgalo Ploščati strgalo Polirna enota Dolžina stroja 4360 mm Navodila za uporabo in orodje Letnik izdelave 2008 Cena 15000,-

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 0-261-07-3237, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, višina obdelovanca (maks.): 60 mm, največja debelina roba: 6 mm, vrsta nastavitve višine: mehanski, vrsta aktuacije: električni, skupna višina: 1.580 mm, skupna dolžina: 4.780 mm, skupna širina: 1.130 mm, skupna masa: 1.630 kg, Oprema: CE označba, dokumentacija / priročnik, Ponujam profesionalni stroj za obrobno lepljenje blagovne znamke Brandt, model Optimat KDF 430. * Blagovna znamka: Brandt (HOMAG – skupina) * Model: Optimat KDF 430 * Letnik: 2008 * Funkcije: Obrobno lepljenje z lepilom EVA * Drugi rezervoar za lepilo za menjavo barv * Diamantni predrezalnik * Rezanje na dolžino * Pritiskalne valje * Krožna žaga za rezanje dolžine * Rezalno agregat zgoraj/spodaj: zaobljanje, faziranje, poravnava * Agregat za zaobljanje robov * Profilna rezalna plošča * Ploščna rezalna plošča * Največja višina obdelovanca: 60 mm * Največja debelina obrobe: 6 mm (masivni les) Stroj je popolnoma funkcionalen in pripravljen za uporabo! Na voljo od 40. tedna leta 2026. Za dodatna vprašanja sem vam na voljo. Codpfx Aajzrtbpjhjrg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, največja debelina roba: 3 mm, hitrost pomika os X: 11 m/min, višina plošče: 60 mm, največja hitrost vrtenja: 12.000 obr/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 60 mm Min. panel height: 8 mm Max. panel height: 60 mm Min. panel width: 70 mm Csdpoxw Tngjfx Aahsrg Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Number of working units: 5 Max. spindle speed: 12,000 rpm MACHINE DETAILS Unit: Sizing/trimming Unit: Correction Automatic timed engagement: yes Motor power: 2.2 kW Edge preheating lamps Coil magazine Number of positions: 1 Gluing system Hot-melt glue pot Hot-melt pre-fuser Edge pressure roller conveyor Number of pressure rollers: 3 With NC positioning Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Max. processing speed: 11 m/min Motor power: 0.18 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Edge trimming Number of motors: 2 With NC positioning Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Edge scraper Edge Processing Unit 4 Unit: Glue scraper Installed total power: 13 kW EQUIPMENT Control system EASY CONTROL EC 10+ CE marking

Stanje: dober (rabljeno), Leto izdelave: 2019, REF: MM6469 Celoten sistem za polnjenje in zapiranje cevi, ki obsega naslednjo opremo: Csdjzp E Sbepfx Aaherg 1 x mešalnik Collette z visoko hitrostjo, z 2 x mešalnima posodama (za serije mešanice 150 kg), črpalko in cevovodom za neposredno dovajanje iz posode v stroj za polnjenje/zapiranje cevi. 1 x rotacijski stroj za polnjenje in zapiranje cevi Axomatic. Proizvajalec – Axomatic Srl. Tip – AXO 1000 MATIC. Datum proizvodnje – 2019. Hitrost – 60 do 90 cevi/minuto. Opremljen z lijem za polnjenje, selektorjem cevi, detektorjem za odsotne cevi na krožnem nosilcu, napravo za polnjenje, napravo za zapiranje s kodo na zapiralu, stiskalnikom (na vrhu za odpadke) in izhodnim žlebom. Dobavljen z glikolnim hladilnikom Eurocold, črpalko, cevovodom in 2 x paletami cevi. Pri tej napravi so bile zamenjane vse zračne cevi. Prej uporabljena in nastavljena za polnjenje cevi z glazuro, vendar je teža in velikost cevi spremenljiva (10 g do 120 g). Električne zahteve – trifazni tok. Največji tlak zraka – 8 bar. Dimenzije sistema za polnjenje cevi AXO 1000 MATIC – dolžina 2300 mm x širina 1400 mm x višina 2350 mm. Teža sistema za polnjenje cevi AXO 1000 MATIC – 1100 kg.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 0-261-04-6588, Funkcionalnost: popolnoma funkcionalen, moč: 21 kW (28,55 KM), višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, skupna dolžina: 6.060 mm, skupna masa: 2.600 kg, The machine has the following configuration: Emulsion spray at infeed and outfeed Edge preheating Codpfeyu If Nox Aahorg Pre-milling unit: Tool diameter: 100 mm, tool height: 63 mm, diamond tool with interchangeable knives, motorized distance adjustment Glue application unit: Glue and hot air application, heated applicator roller, quick change of the entire unit, automatic positioning via motor, 3 pressure rollers, edge feed speed: 14 m/min Cut-off unit: Twin-motor unit with automatic tilting up to 15°, THK prism guides Radius milling unit: 2 tools, automatic adjustment in two axes, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL SPECIFICATIONS Workpiece thickness: 8–60 mm Feed speed max.: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double upper pressure for part stability Electronic thickness control Frequency inverter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control panel

Leto izdelave: 1979, stanje: dober (rabljeno), Ploskovna brusilni stroj blagovne znamke Brand Tip: Compact 600/800 z upravljalnikom Heidenhain Druge tehnične podatke nimamo na voljo. Po želji lahko za doplačilo organiziramo transport in nakladanje po vsej Evropi. Cene so brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše ekipa vam z veseljem pomaga. Credpfezvfpyex Aahog Nakup in prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, OBDELOVALNIH STROJEV IN OSTALIH. Potrebujete kakovosten, a ugoden stroj za vašo proizvodnjo? Ali pa želite svojega prodati? Za več informacij ali kontaktne možnosti nas kontaktirajte preko kontaktnega obrazca.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 259 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1200002, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, Skoraj novo CNC vertikalno obdelovalno središče Haas VF-4-EU z le 259 delovnimi urami. Stroj je v brezhibnem optičnem in tehničnem stanju. Tovarniško je VF-4 popolnoma pripravljen za 4-/5-osno obdelavo – vgrajen je obsežen paket 5th-AXIS: - Osne kartice za 4. in 5. os - Dinamični zamik obdelovanca - Krmiljenje središča orodja - Visokohitrostna obdelava - Programabilna šoba za hladilno tekočino - Brezžična Renishaw merilna sonda in tipalo za orodje Stroj je tudi sicer izjemno bogato opremljen: - TSC – notranji dovod hladilne tekočine pod pritiskom 21 bar - Spiralni transportni trak za odrezke - Celoten vzdrževalni paket za hladilno tekočino (samodejno polnjenje, ločevalnik olja, kondenzator za meglo) - Hitri menjalec orodja 30+1 - Vreteno s 10.000 vrt/min Krmiljenje je sodobna verzija Haas Next Generation Control z zaslonom na dotik, WiFi, Ethernetom in daljinskim nadzorom HaasConnect. Stroj je tako pripravljen za zahtevne obdelovalne naloge. Na voljo so originalni transportni varovalci. Priložen je tudi originalni Haas voziček za orodja SK40. Ogled in demonstracija pod elektriko možna po dogovoru kadar koli. Nakladanje in prevoz lahko organiziramo. Ustrezna CNC rotacijska miza TRT-210 je v prodaji v ločenem oglasu in jo je mogoče na željo vključiti v paket. LANG osnovne plošče niso vključene v ponudbo. Tehnični podatki: Credpsy Tp E Asfx Aahsg - Hodi X / Y / Z: 1.270 × 508 × 635 mm - Razdalja vreteno-miza: 107 – 742 mm - Miza: 1.321 × 457 mm, 5 T-utorov (16 mm), maksimalna obremenitev mize 1.588 kg - Vreteno: 10.000 obr/min, BT/CT 40, inline direktni pogon, tekočinsko hlajeno - Pogonska moč: 22,4 kW - Največji navor: 122 Nm pri 2.000 obr/min - Hitri pomik X/Y/Z: 25,4 m/min - Največji podajalni pomik: 16,5 m/min - Menjalec orodja: Bočni SMTC, 30+1 pozicij - Največji premer/dolžina/teža orodja: 64 mm / 330 mm / 5,4 kg - Čas menjave (od čipa do čipa): pribl. 3,6 s - Priključna napetost: 400 V / 50 Hz, 3-fazno (vgrajen interni transformator) - Tlak zraka: pribl. 113 l/min pri 6,9 bara - Rezervoar za hladilno tekočino: 208 l - Masa: pribl. 6.260 kg (s transporterjem) Krmiljenje: - Haas Next Generation Control z zaslonom na dotik - 1 GB programski pomnilnik, Ethernet + WiFi - HaasConnect (daljinski nadzor), HaasDrop (brezžični prenos datotek) - Prikaz medijev M130, varno delovanje, sinhronizirano rezkanje navojev - Modul za zgodnje zaznavanje izpada elektrike, prenapetostna zaščita - Oprema / opcije (vse vgrajene v tovarni) - 5-osni paket VF-YT (4. + 5. os pripravljeni za pogon, DWO/TCPC, visokohitrostna obdelava, programabilna šoba za hladilno tekočino) - Brezžični Renishaw merilni sistem (intuitiven) - TSC – notranji dovod hladilne tekočine skozi vreteno, 21 bar - Spiralni transportni trak za odrezke - Vzdrževalni paket za hladilno tekočino (samodejno polnjenje, ločevalnik olja, kondenzator za meglo) - Dodatni filter za hladilno tekočino (vrečasti filter 25 µm) - Komplet filtrov za kad za odrezke (200 µm) - Variabilni pretok hladilne tekočine (krmiljeno preko M-kode) - Pihanje notranje strani vrat stroja - Dvižne zanke, zaslon na dotik, zaklepanje vrat

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, mobile air filtration extraction box Box with built-in fan and filter cartridge. Equipped with HEPA filter. Crjdpfx Aaevvcqxjhog For ventilation, filtration, and extraction of room air. Extraction capacity approx. 1800 m³/h Exhaust fan: IMOFA DS 11-4, 460 Watt, 50 Hz, 4.8 Ampere Voltage: 230 V, 50 Hz Systemair RTRE 5 transformer controller 4 filter cartridges 1 ULTIMA RP HEPA filter, 3000 m³/h Aluminium frame housing, mobile with lockable castors Dimensions: 100 x 100 x 80 cm Weight: approx. 120 kg

Stanje: rabljeno, prevoženi kilometri: 5.465 km, moč: 15 kW (20,39 KM), prva registracija: 06/1996, vrsta goriva: dizel, skupna masa: 1.555 kg, barva: rdeča, voznikova kabina: dnevna kabina, emisijski razred: noben, Leto izdelave: 1996, obratovalne ure: 5.465 h, Oprema: kabina, registracija tovornjaka, Številka vozila za povpraševanja: 80864 Kubota, KX 41-2SC * Letnik: 1996 * Kabina * Skupna masa: 1.555 kg Izjava o omejitvi odgovornosti: Pridržujemo si pravico do sprememb, prodaje in napak. Dodatne slike in videoposnetke najdete na naši spletni strani. Naša obsežna storitev vključuje, na primer: * Nakup / prodaja / najem gospodarskih vozil * Hitro in enostavno financiranje * Priprava vseh (izvoznih) dokumentov * Naročilo izvoznih registrskih tablic Credpfx Aaezxk Umehog * Priprava vozila: nove ponjave, označevanja, barvanje itd. * Profesionalno nakladanje / varovanje tovora * Tehnični pregledi TüV, storitev registracije * Prevoz gospodarskih vozil Vprašajte naše usposobljeno strokovno osebje, z veseljem vam bomo svetovali.

Stanje: rabljeno, Robna lepilka BRANDT optimat kdf340 Predrezkarji Nanašanje lepila z valjčkom Pnevmatska pred giljotina Pritisni valji Končne žage za obrezovanje Rezkalna enota zgoraj-spodaj R1-R2 Profilni cikli Polirka Maks. višina elementa 45 mm Maks. debelina robnega traku v roli 3 mm Crsdsy Dc Ulepfx Aahsg Pomik 10 m/min Dolžina stroja 350 cm Stroj preizkušen, pripravljen za delo

Stanje: dober (rabljeno), Leto izdelave: 2013, MARK ANDY XP 5000 / 13" – 4-Farben - Baujahr: 2013 - Bahnbreite: 330 mm / 13" Crsdotubz Uopfx Aahjg Ausstattung: - ABWICKLER - 4 x FLEXODRUCKWERKE - BST-KAMERA - UV-TROCKNER - HEISSLUFTTROCKNER - 1 x STANZWERK GAPMASTER - 1 x STANZWERK GAPMASTER - 100% SCHLAUCHBAHNKONTROLLE - AUFWICKLER - Bahnkantensteuerung - Bedienpanel - Umfangreiches Druckzubehör/Magnetzylinder - Rasterwalzen Für Rückfragen stehe ich Ihnen gerne zur Verfügung. Technischer und optischer Zustand: Technisch: 9/10 (geprüft, in einwandfreiem Laufzustand) Optisch: 9/10 (gereinigt, kann direkt an den Endkunden geliefert werden)

Leto izdelave: 2023, stanje: rabljeno, Henkovac vakuumski pakirni stroji — popolnoma novi modeli 2023 na zalogi. Prikazani na fotografijah: Henkovac M4 Cjdpfxjku H I So Aahjrg Henkovac M6 Henkovac D1 Henkovac D4 Vsi modeli so opremljeni z nadgrajenimi vakuumskimi črpalkami za večjo zmogljivost, senzorjem za nadzor, vstavnimi vložki in funkcijo soft-air. Za podrobnejše informacije in dodatne fotografije nas kontaktirajte.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vrsta goriva: dizel, lastna masa: 1.855 kg, Leto izdelave: 2012, obratovalne ure: 3.441 h, vrsta pogona: Diesel, Mini bagr Cjdjzqxi Nspfx Aahsrg Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Opis: Mini bagr KUBOTA KX019-4 - letnik 2012 - 3441 delovnih ur - lastna teža 1855 kg - mehanski hitri priključek GEEL/Martin - 2 kos rabljena rovna žlica 30 + 60 cm - 1 kos hidravlična naklonska žlica 100 cm - HIDRAVLIČNO NASTAVLJIVO PODVOZJE 100 - 130 cm - delovne luči - 3-valjni dizelski motor Kubota 11,8 kW (16 KM) - bagr v dobrem stanju - nova kontrolna knjižica - novi pregled opravljen s strani sodnega izvedenca Hitri priključek, žlice, 3. ventil, ogrevanje, polna kabina,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Credpfx Ajd Tqaljahog Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. Crsdpfx Aaoguk A Hjhjg The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) Cedpfxed Tbbdo Aahorg - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) Csdpfx Ajfdkb Ueaherg - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Cedpeguk Dvofx Aaherg - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.