Kraussmaffei Km 651-6100 Gx nakup rabljenega (10.887)

Stanje: novo, Leto izdelave: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing System Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle opening: 9 mm Technical Specifications (standard version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force, forward/back: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Shot volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection capacity: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic System Hedpfx Alsxdd U Dsfefg Pump motor power: 97 kW Installed heater power: 54 kW Number of barrel heating zones: 7 Dry cycle time (per Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Hfsdpfx Aeymn Rvolfjg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Hfsdpfxeymn Nfe Alfsg Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, tlak vbrizgavanja: 1.795 letvica, odmični hod: 2.100 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Movable platen opening force: 89 kN Movable platen closing force: 92 kN Mounting platen (H x V): 1,600 x 1,550 mm Clear space (H x V): 1,120 x 1,000 mm Hsdpfxeyv Acmo Alfefg Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Max. mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Rated output of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Operating hours: 50,000 h EQUIPMENT Swing-out elements 1 x air valve Tie-bar pulling device 3 x hydraulic core puller at movable platen (BWAP) 2 x hydraulic core puller at fixed platen (FWAP) 20 x hot runner control zones Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Used injection moulding machine direct from the manufacturer! Hsdpfx Alenh Rwgefefg As the manufacturer KraussMaffei, we are offering one of our used injection moulding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 8000 kN - Distance between tie bars (h x v): 1120 x 1000 mm - Max. mold opening distance: 1400 mm - Min./max. mould installation height: 600/1100 mm - Movable platen stroke: 2000 mm - Ejector stroke: 250 mm - Ejector force: 226 kN (reverse: 59 kN) INJECTION UNIT - Screw diameter: 95 mm - L/D ratio: 23 - Injection pressure: 1795 bar - Injection volume: 3367 cm³ - Shot weight for PS: 3064 g - Injection rate: 690 cm³/s - Nozzle contact force: 166 kN Electrical Parameters - Pump connected load: 90 kW - Heating capacity: 61 kW Weight and Dimensions - Net weight: 45 t - Machine dimensions (L x W x H): 10.4 x 2.86 x 2.39 m As a rule, we deliver this system in fully functional basic condition. In addition, as the manufacturer of these systems, we can offer various additional options depending on individual requirements, such as: - Possible control system upgrades to extend the service life of the machine - Energy optimization upgrades - If required, integration with KraussMaffei digital products - Plasticizing unit retrofits - Optional: Organization and handling of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) With us, you benefit from first-class service and have the option to purchase ready-made spare parts packages with wear parts to ensure seamless production with your new pre-owned machine. Don’t hesitate – contact us today!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm Hsdpfx Alsw Avafefofg INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 control units on the movable platen. The machine is equipped with a PV (proportional valve) injection unit regulation system. Control is provided by a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation via ProcessDesigner. Plasticising unit: Complete system for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Maximum opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle touch force: 166 kN Electrical-hydraulic equipment: Pump motor power: 120 kW Hfjdpfx Aswyxbgjlfog Heater power: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight: Net weight (incl. control cabinet): 40 tonnes Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force 8500 kN Maximum mold opening force 560 kN Moving platen opening force 153 kN Moving platen closing force 117 kN Mounting platen (h x v) 1600 x 1600 mm Clearance between tie-bars (h x v) 1140 x 1140 mm Mold opening stroke 1600 mm Min./max. mold installation height 500 / 1100 mm Hedpfxoyb Sx He Alfofg Max. opening distance 2100 mm Ejector stroke 300 mm Ejector force forward/backward 200/100 kN Injection unit: Screw diameter 95 mm L/D ratio 23 Injection pressure 1795 bar Shot volume 3367 cm³ Shot weight (PS) 3064 g Injection flow rate 690 cm³/s Screw speed 116 rpm Plasticising rate 104 g/s Nozzle contact force 166 kN Electrohydraulic equipment: Pump motor rated power 90 kW Installed heating power 53 kW Number of temperature control zones (barrel heating) 7 Oil capacity 1500 L Dimensions and weights: Required space approx. 11.00 x 3.00 x 2.60 m Total weight 43000 kg Max. mold weight 12200 kg Accessories: - Vibration mounts Additional features: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 6,500 kN Maximum mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1,520 x 1,470 mm Clear daylight (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 kN Injection unit: Hfsdjx Hzzcepfx Alfog Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow: 690 cc/s Screw rotation speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 50 kW Number of temperature control zones for barrel heating: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Vibration dampers - Krauss Maffei robot LR300 X axis: 1,200 mm, servo-driven Y axis: 1,000/1,000 mm, telescopic, servo-driven Z axis: 3,500 mm, servo-driven C axis: 0 - 90° pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 hot runner controllers - 2 x hydraulic core pulls on the moving platen (BWAP) - 2 x hydraulic core pulls on the fixed platen (FWAP)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: - Screw diameter: 80 mm - Shot weight: 1464 g - Injection pressure: 1855 bar - Dosing volume: 1608 cm³ Clamping Unit: - Clamping force: 400 t - Tie bar spacing: 920 x 830 mm - Platen size: 1280 x 1240 mm - Ejector: hydraulic - Clamping system: hydraulic Control: MC5 - Touchscreen Additional Equipment: - Very good technical condition - Operating hours: approx. h in automatic mode - Euromap 67 - Robot interface - Min./max. mould installation height: 400/900 mm - Air valve x 4 - Hydraulic core pull x 4 - Hot runner control x 36 - Self-sealing nozzle x 10 Hedjy Sl D Eopfx Alfjfg - Injection unit hardened - bimetallic - Proportional valve on injection unit – precise injection - Function for automatic withdrawal of upper tie bar - Machine has been regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 Robot - Year of manufacture: 2018 - High-speed robot - 5-axis robot: 5 axes are powered by servo motors (electric): X, Y (telescopic), Z, B (rotation) and C - Vacuum - Touch control panel - Robot with adapter, conveyor belt and safety enclosure - Purchase of robot and conveyor belt at extra cost Dimensions: - Weight: 22,650 kg - Length/Width/Height: 7.58 x 2.73 x 2.32 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Here we offer a very well-maintained, regularly serviced injection moulding machine. We are also interested in taking back well-kept machines from model year 2010 and newer as part exchange. Please offer us any surplus machines you may have coming available. Full maintenance by manufacturer up to the present Injection moulding machine Krauss Maffei KM65-160 C2 Injection moulding machine: Manufacturer / Type: Krauss Maffei KM65-160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 Full annual servicing carried out by manufacturer Clamping unit: Clamping force: 650 kN / 65 tons Hfjdpfx Ash Dp R Ejlfog Tie bar spacing: 405 x 405 mm Minimum mould height: 250 mm Max. platen opening: 750 mm Standard platen size: 610 x 610 mm Ejector stroke: 150 mm Core pull: 1 x unit Injection unit: Injection unit size / cylinder diameter: 160 / Cylinder Ø25 mm and cylinder Ø18 mm Max. shot weight (Ø25): 47 g/PS Injection flow rate: 63 cm³/sec Max. specific injection pressure: 2500 bar Handling interface: Euromap 12 Dosing unit interface: Yes Dimensions & Weights: Weight with control cabinet: 3.8 t Length: 3,800 mm Width (machine only): 1,050 mm Height: 1,890 mm Oil fill: 270 L Location: Hanover / Lower Saxony The machine is in excellent condition and can be inspected under power. Any peripheral equipment shown in photos is NOT included in the offer! The machine is available for immediate delivery from our warehouse. Loaded free onto buyer's truck, or delivered free to address against reimbursement of shipping costs. About the machines and our company: - We only sell machines owned by us, acquired from ongoing production, from our Hanover warehouse - All machines offered are checked and tested prior to removal - We do NOT sell insolvency goods – we are NOT a broker trading in third-party assets - All offered machines come from successful companies where regular servicing and maintenance is a matter of course - All offered machines can be viewed at our warehouse

Stanje: dober (rabljeno), Leto izdelave: 1999, vpenjalna sila: 650 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 65-160 C2 Zapiralna sila: 650 kN Št. stroja: 641070 Št. naročila: 643883/1 Leto izdelave: 1999 Mednarodna oznaka velikosti: 160 C2 / 65 Obratovalna napetost: 400 V Faze: 3 Frekvenca: 50 Hz Skupni tok: 153 A Predvarovalka: 160 A Hedpfeytik Rsx Alfjfg Maks. tok motorja: 30 A Teža stroja: 3200 kg Lokacija: Freiburg

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 Hedpsw U N Ixofx Alfsfg INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 6.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61033935, vpenjalna sila: 4.500 kN, Oprema: dokumentacija / priročnik, Krauss Maffei LRX 250 robot Hedpfxew Dcppo Alfofg Szczegółowa specyfikacja w załączonym pliku. Detailed specification in the attached file.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Oprema: dokumentacija / priročnik, KraussMaffei KM650-4300 GX Machine Clamping force kN: 6500 Tie bar spacing (h x v) mm: 1110 x 960 Hodpfx Alsy Apdqefsfg Mould opening stroke mm: 1450 Minimum mould height mm: 450 Maximum mould height mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (HPS-M mixing) L/D ratio: 20 Injection pressure bar: 1839 Shot volume cm³: 2290 Control version: MC5 Screen language: German Condition: tested, operational Equipment: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Full insulation of the plasticizing cylinder for reduced energy consumption - 2 x pneumatic valve on moving mounting platen for blowing function - 2 x pneumatic valve on fixed mounting platen for blowing function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor control - Mechanical robot interface to EUROMAP 18 - Hydraulic ejector plate including threaded holes and through holes in moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, 1-fold on moving platen - Pneumatic core pull system, 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "plasticizing" signal at HAN 3 A socket - Switching to holding pressure depending on cavity pressure (Kistler) - Quality statistics - Chip card reader unit - Graphic display and analysis package with 10 charts - Trend graphics - PV control - Interface for production data consisting of 5 potential-free contacts in control cabinet - 3 freely programmable inputs and outputs in control cabinet KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demoulding stroke: 1200 mm - Maximum payload: 35 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, injekcijska masa: 2.452 g, Ta Krauss Maffei KM 800-6100MX je bila izdelana leta 2007. Ima zapiralno silo 8000 kN in vbrizgalni volumen 2695 cm³, zaradi česar je primerna za različne materiale kot so PA, PP, PE in ABS. Stroj je opremljen z robotskim sistemom Wittmann, ki izboljšuje možnosti rokovanja. Če iščete kakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju KM 800-6100MX podjetja Krauss Maffei, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Vbrizgalna enota: 6100 • Vbrizgalni volumen: 2695 cm³ • Vbrizgalni tlak: 2242 bar • Predelovani materiali: PA, PP, PE, ABS ipd. • Temperatura cilindra: do 450°C • Razpoložljivost: začetek leta 2027 Hfodpfxjyyxc Do Alfeg Dodatna oprema • Ravnanje: Wittmann robotski sistem • Model: W743 • Moč: 400 V, 18 A / 12,5 kVA • Hodi osi: X 1200 mm, Y 2000 mm, Z 4000 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection moulding machines for sale. CONTROL SYSTEM - MC6 TECHNICAL DATA CLAMPING UNIT - Clamping force: 10,000 kN - Tie bar spacing (h x v): 1400 x 1120 mm - Maximum daylight between platens: 1700 mm - Minimum/maximum mould installation height: 700/1200 mm - Platen opening stroke: 2400 mm - Ejector stroke: 250 mm - Ejector force: 226 kN (Reverse: 59 kN) INJECTION UNIT - Screw diameter: 95 mm - L/D ratio: 23 - Injection pressure: 1795 bar - Injection volume: 3367 cm³ - Shot weight for PS: 3064 g - Injection rate: 690 cm³/s Hjdjnh Rhvspfx Alfsfg - Nozzle contact force: 166 kN Electrical parameters - Pump drive power: 90 kW - Heating capacity: 61 kW Weight and dimensions - Net weight: 65 t - Machine dimensions (L x W x H): 10.98 x 3.29 x 2.49 m As standard, we supply this system in fully functional basic condition. Additionally, as the OEM, we can offer various add-ons depending on the individual case, including: - Energy efficiency updates for the system - Optional: Integration with KraussMaffei digital products - Plasticising unit retrofits - Optional: Organisation and handling of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) With us, you benefit from first-class service, and the option to purchase complete spare part packages for wear parts to ensure uninterrupted production with your new pre-owned machine. Don't hesitate—contact us today for your enquiry!

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61035145, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 2.429 letvica, injekcijska masa: 140 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 120 mm, odmični hod: 950 mm, vgradna višina: 450 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 6.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market requirements. It combines high performance, easy operation, and short delivery times. It can be used in a wide range of applications, for example in the packaging industry, electrical and electronics industry, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT color display with multitouch functions CLAMPING UNIT  Clamping force kN 1200  Maximum mold opening force kN 180  Tie bar spacing (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mold height min. - max. mm 180 - 450  Maximum opening stroke mm 850  Maximum mold opening travel mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force forward/backward kN 27 / 33  Ejector speed forward/backward mm/s 300 / 300  Maximum mold weight kg 850 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive / speed 1/min 374  Plasticizing rate (standard screw)4) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating power kW 11.5  Power supply V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing unit  BluePower full insulation for plasticizing cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface pneumatic cascade 4-fold  Euromap interface for handling E18 + E67  Euromap interface (central computer) E67, E77  Water manifold 4-fold Hfjdpsy Rmwdefx Alfog  Electrical pre-equipment for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Max mold opening force: kN 55 - Tie bar clearance (h x v): mm 470 x 420 - Mounting plate size (h x v): mm 670 x 670 - Mold installation height min.-max.: mm - Maximum daylight opening: mm 750 - Max. mold opening stroke: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force forward/return: kN 23 / 10 - Ejector speed forward/return: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter / Type: mm 40 / Standard (other diameters available) - Effective L/D ratio: 20 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow: cm³/s 126 - Screw drive/speed: rpm 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phase with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 3.55 - Length x width x height: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control zone for nozzle heating - Air valve, single (BWAP) - Pneumatic control for hot runner closure, single Hedpfoy Rlmwox Alfofg - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression mode - Graphics analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 44731, vpenjalna sila: 500 kN, premer vijaka: 25 mm, razmak između stupova: 320 mm, injekcijska masa: 47 g, minimalna višina orodja: 200 mm, odmični hod: 550 mm, skupna dolžina: 4.000 mm, skupna širina: 1.163 mm, skupna višina: 1.787 mm, skupna masa: 2.300 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vhodni tok: 58 A, Please refer to the images and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. Hfjdsx Srggepfx Alfjg You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our website to view this and other available offers. The stated company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are reserved.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 98.806 h, vpenjalna sila: 40.000 kN, premer vijaka: 130 mm, injekcijska masa: 8.100 g, skupna dolžina: 4.900 mm, skupna višina: 4.200 mm, skupna masa: 255.000 kg, # 🇫🇷 Annonce de Vente 2x KraussMaffei KM 4000-19000 MC – Presses à injecter – Année 1998 À vendre : deux presses à injecter identiques du fabricant KraussMaffei, modèle KM 4000-19000 MC, équipées d’une commande MC3F. Ces machines sont spécialement conçues pour la production de grandes pièces plastiques nécessitant une très forte force de fermeture. Les installations sont entièrement équipées, comprenant plusieurs périphériques pour l’alimentation matière et la gestion du procédé. ## Données techniques * Fabricant : KraussMaffei * Modèle : KM 4000-19000 MC * Commande : MC3F * Année de fabrication : 1998 * Heures machine : env. 98 806 h * Force de fermeture : 40 000 kN * Poids d’injection max. : 8 100 g * Diamètre de vis : 130 mm Hedpfxeyt Hy No Alfofg ## Dimensions & Poids * Profondeur machine : 4 900 mm * Hauteur machine : 4 200 mm * Poids machine : env. 255 000 kg ## Équipements * Interface robot : KUKA KRC4 * Commande d’injection séquentielle : S.I.S.E. IS-Tech * Thermorégulateurs : GWK * Système de dosage et de mélange : Motan Colormetric * Convoyeur à bande ## Machines disponibles * Machine n°14 * Machine n°15 Les machines peuvent être achetées séparément ou en lot. Visite sur rendez-vous possible.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 99.161 h, vpenjalna sila: 32.000 kN, premer vijaka: 130 mm, injekcijska masa: 8.100 g, skupna dolžina: 4.900 mm, skupna višina: 4.200 mm, skupna masa: 230.000 kg, Spritzgießmaschine mit hoher Schließkraft des deutschen Herstellers KraussMaffei zu verkaufen. Angeboten wird das Modell KM 3200-19000 MC, das speziell für die Herstellung von großvolumigen Kunststoffteilen und industrielle Anwendungen konzipiert ist. Mit ihrer enormen Schließkraft und großem Schussvolumen eignet sich die Maschine besonders für die Fertigung technischer Kunststoffteile sowie für hohe Stückzahlen im Großformat. Die Maschine verfügt über eine Schließkraft von 32.000 kN, einen Schneckendurchmesser von 130 mm und ein maximales Schussgewicht von 8.100 g. Dadurch ist eine effiziente Verarbeitung großer Materialmengen möglich. Zur Ausstattung gehören umfangreiche Peripheriegeräte, unter anderem eine Roboterschnittstelle für KUKA KRC4, ein sequentieller Einspritzcontroller S.I.S.E. IS’Tech, Temperiergeräte von GWK sowie ein Motan Colormetric Dosier- und Mischsystem. Ein Förderband ist ebenfalls inklusive. Technische Daten * Hersteller: KraussMaffei * Modell: KM 3200-19000 MC * Maschinen-Nr.: IMM MC3F No.12 * Baujahr: 1998 * Betriebsstunden: ca. 99.161 h Leistungsdaten * Schließkraft: 32.000 kN * Schneckendurchmesser: 130 mm * Maximales Schussgewicht: 8.100 g Abmessungen und Gewicht * Maschinengewicht: ca. 230.000 kg * Maschinentiefe: ca. 4.900 mm * Maschinenhöhe: ca. 4.200 mm Die Maschine ist eine zuverlässige und bewährte Lösung für die industrielle Kunststoffverarbeitung und besonders für Hersteller mit Bedarf an großdimensionierten Spritzgießkapazitäten attraktiv. Hfsdpfx Aoyt H Dholfjg Weitere Informationen, Fotos oder Besichtigungstermine gerne auf Anfrage.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold Hfodpfjyzz Irsx Alfeg - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Moving Platen Drive Force (opening): 45 kN Moving Platen Drive Force (closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Tie Bar Spacing (H x V): 520 x 520 mm Hfodpfx Aey Nlb Solfog Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (forward/back): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Stroke Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electro-Hydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Zones: 5 Oil Capacity: 489 l Dimensions & Weights: Floor Space Approx.: 5.50 x 2.00 x 2.20 m Overall Weight: 8200 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve - 8 x Hot Runner Control Zones - 2 x Core Pull on Moving Platen - 2 x Core Pull on Fixed Platen - Robot Interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 57.830 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, delovna prostornina: 1.047 cm³, Zaklepna sila 3000 kN Maks. sila za odpiranje orodja 160 kN Pogon pomične plošče, odpiranje 86 kN Pogon pomične plošče, zapiranje 68 kN Vpenjalna plošča (š x v) 995 x 1050 mm Prost prehod (š x v) 630 x 630 mm Hod odpiranja orodja 820 mm Minimalna višina vgradnje orodja 330 mm Maksimalna odprtina 1150 mm Izmetalni hod 200 mm Izmetalna sila naprej/nazaj 58 kN Brizgalna enota: Premer polža 70 mm Razmerje L/D 20 Brizgalni tlak 1778 bar Hfodpfx Ajy Nk Taolfsg Volumen hoda 1047 ccm Teža brizgalnega strela (PS) 953 g Pretok vbrizgavanja 400 ccm/s Hitrost vrtenja polža 218 1/min Pretok plastifikacije 75 g/s Sila šobe 82 kN Elektrohidravlična oprema: Nazivna moč črpalnega motorja 55 kW Vgrajena moč gretja 30 kW Regulacijske cone cilindričnega gretja 6 Polnjenje z oljem 720 l Dimenzije in teža: Potreben prostor pribl. 6,20 x 2,20 x 2,40 m Skupna teža 12500 kg Največja teža orodja 3430 kg Dodatki: - Nihajni elementi Dodatna oprema: - 1 x zračni ventil - 2 x izvleki jedra - Robotski vmesnik po Euromap 12