Komora Za Preskus Temperaturnega Šoka -70–220°C nakup rabljenega (114.487)

Leto izdelave: 2000, obratovalne ure: 104.382 h, stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, alternating between upper and lower temperature levels under varying load conditions. Through these cyclic stresses and temperature-change-induced accelerated aging, potential weaknesses in the specimen can be identified. - Vertical arrangement of test chambers - Ball screw drive for secure carriage guidance - Carriage load capacity: 50 kg (VT3 7012 S2) - All-around mesh baskets secure the test specimens - High air circulation rate for short temperature change times and even temperature distribution in the test chamber - Warm chamber can be used as a temperature storage unit; cold chamber can be used as a temperature cycling unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Rated Voltage: 400 V Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452A Cooling Unit: Water-cooled Shock Cooling (nitrogen cooling) via customer-supplied liquid nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class: Device: IP 42 Control unit: IP20 Switch cabinet: IP 54 Key Parameters for Temperature Tests in Single-Chamber Operation: Lsdpfsx Exmtox Al Njaa Temperature Range: Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K (in steady state) Temperature deviation spatially: ±2 K (in steady state within carriage) Warm chamber heating rate: 11 K/min Cold chamber cooling rate: K/min Cold chamber heating rate: 2 K/min Warm chamber cooling rate: K/min Observation window: 355 x 355 mm Cable port: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg Financing through our partner bank is available. komplett-konzept.leasingo.de More articles—new and used—can be found in our shop! International shipping rates upon request!

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temperature deviation over time at center of usable space: ±1 K Laodpfxsx Hhfhe Al Nsa Temperature deviation spatially: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Internal dimensions (W x D x H): 470 mm x 650 mm x 410 mm External dimensions (W x D x H): 930 mm x 2115 mm x 1970+ mm Access port: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your security as a buyer, please note the following information! The following steps are carried out in advance for our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data and details!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Ljdpsigg Hnjfx Al Neaa Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Weiss Type: TS 130 Temperature Shock Test Chamber, Water-Cooled Specification: Lodpfovwckhex Al Neaa - Temperature range hot chamber: +60°C to +220°C - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000 liter volume 70 = Low temperature range (-70°C) e = Energy-optimized version 5 = Temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Ledpfx Asy El Ttjl Nsaa Refrigerants: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications may be subject to change or error!) Please feel free to contact us by phone for any further questions.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021, operating hours 4748.2 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to examine components and materials under various temperature conditions (e.g., cold, heat, ageing). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000-litre volume 70 = Low-temperature range (-70°C) e = Energy-optimised design 5 = Temperature change rate (series) Equipment: - Stainless steel interior Lodpoy Dd Nqjfx Al Njaa - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alteration and errors in technical data. Further details available on request!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, ageing). Meaning of model designation: T = Temperature test chamber 1000 = approx. 1000 litre volume 70 = low temperature range (-70 °C) e = energy-optimized design Ledpfx Aey Dclwel Njaa 5 = temperature change rate (series) Equipment: - Stainless steel inner chamber - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important information for buyer safety! The following checks and works are carried out on all chambers we offer before delivery: 1. Functional testing and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.018 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, Year of manufacture: 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000-liter capacity Lodpfxsy Dclqj Al Noaa 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change speed (series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Observation window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: - Cooling: approx. 6 K/min - Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important safety information for buyers! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h For sale is a used temperature test chamber from Weiss Technik. The chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of the designation: T = temperature test chamber 1000 = approx. 1000-liter volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Lasdpfx Aley Dck Ts Nea Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, the following measures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change, errors and omissions excepted!) If you have further questions, we will be happy to answer them by phone.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748 h For sale is a used temperature test chamber manufactured by Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: stainless steel inner chamber recirculation fans touch control panel (WEBSeason) observation window automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: cooling approx. 6 K/min Laedpfxsy Dciis Al Nea heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, details may vary!) We are happy to answer further questions by phone.

Leto izdelave: 2020, obratovalne ure: 6.126 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, hours of operation: 6,126 h. Description: For sale is a high-quality climatic test chamber by Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is used for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics testing - Environmental and aging tests - Quality and endurance testing The chamber can produce both extremely low temperatures down to approx. -70 °C as well as high temperatures up to +180 °C and change these at a defined rate (temperature ramps). Precise control enables reproducible test conditions. Operation is convenient via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Uniform temperature distribution in the test chamber - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and hour meter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to 5 K/min High precision & stability: - Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time - Spatial deviation: ±0.5 to ±1.0 K - Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side ports: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: - R449A (approx. 2.9 kg) - R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: Lajdpeyxm Ulefx Al Nea 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-Cooled Two-Chamber Design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change (heating): 11 K/min Cold Chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change: Heating: 2 K/min Cooling: 3 K/min Test Chamber Volume: 125 liters Temperature Range Hot Chamber: +50°C to +220°C Lajdpfxswxc I Us Al Nea Temperature Range Cold Chamber: -80°C to +70°C Internal Dimensions (W x D x H): 470mm x 650mm x 410mm External Dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port Diameter: ∅ 67mm Power Supply: 3/N/PE AC 400V +10% 50Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452-A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: rabljeno, Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance Data for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Rate of Change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance Data for Climate Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Important Safety Information for Buyers: The following procedures are performed on our offered chambers prior to delivery: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) Lasdpfxsuxq T Dj Al Nsa (Technical data is subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Thermotron environmental test chamber. Lsdpsmhfr Iefx Al Neaa Thermotron Environmental Test Chamber, Water-Cooled Working Volume: 227 liters Temperature Uniformity: All models 0.7°C Temperature Range: -70°C to +180°C Temperature Control Tolerance: All models 0.3°C Shipping Weight: approx. 400 kg Internal Dimensions (W x D x H): 610 mm x 610 mm x 610 mm External Dimensions (W x D x H): 890 mm x 1240 mm x 1850 mm Humidity Range: All models 10% to 98% RH Humidity Control Accuracy: All models 2.5% RH Heating Capacity (minutes, from -65ºC to 71ºC): 17 Heating Capacity (minutes, from -65ºC to 180ºC): 43 Heating Capacity (minutes, from -40ºC to 85ºC): 16 Electrical Requirements at full load (230V/3Ph/60Hz): 19A Electrical Requirements at full load (230V/1Ph/60Hz): 25A Electrical Requirements at full load (220V/1Ph/50Hz): 27A Cooling Capacity (minutes, from 85ºC to -40ºC): 32 Cooling Capacity (minutes, from 71ºC to -65ºC): 54 Cooling Capacity (minutes, from 180ºC to -65ºC): 72 Compressor Size: (2) x 2 Hp Operating Voltage: 400V / 16.7 A Type: SM-8-8200 Condition: used Scope of delivery: (see photo) (Specifications and details are subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VTS 7018-5 Water-Cooled Temperature Test Chamber Lsdpfx Aswq Iymsl Njaa Unit retrofitted to R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3000 W Heat compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (customer side): 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement):

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Type: VT 7021 Temperature Test Chamber, Air-Cooled 1 Feedthrough, DN 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.2 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate Heating: 2.5 K/min Temperature Change Rate Cooling: 2.5 K/min Max. Heat Compensation: 800 W Test Chamber Dimensions: Width 560 mm x Depth 570 mm x Height 630 mm External Dimensions: Width 850 mm x Depth 1250 mm x Height 1640 mm Electrical Connection: 1/NPE AC 230V ± 10% 50Hz Rated Power: approx. 1.8 kW Rated Current: 12 A Refrigerants: R404A and R23 Weight: 355 kg Important Information for Buyers: Ljdpfxjwylv Ds Al Nsaa For your safety, the following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications and information) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Memmert Model: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber manufactured by Memmert, model CTC 256. This unit comes from professional use and is ideally suited for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climate conditions. It allows for both cooling and heating processes and – in this configuration – humidity control. This makes the device perfect for material testing, aging tests, climate stress tests, Lajdpfey D Ni Asx Al Noa and long-term experiments under defined environmental conditions. Thanks to the integrated controller, complex testing programs with specific temperature and time profiles can be configured. The forced air circulation system ensures even temperature distribution within the chamber. Via the available interfaces, measurement data can be logged and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity regulation Electronic controller with program functions Forced air circulation for even temperature distribution Internal protocol memory USB and Ethernet interfaces 230 V auxiliary socket Cable port (side) Water tank system (humidification/condensate) Mounted on castors/mobile Technical data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see picture) Memmert CTC 256 Climate Test Chamber Insertion shelf Water canister Documentation Delivery as shown (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5 with approx. 600 liters usable volume is suitable for temperature and humidity tests, as well as the conditioning of samples and materials in the range from −70 °C to +180 °C. Simcon/32 - Net Control Technical Data: Test Chamber Designation: WK11-600/70/5 External Dimensions (incl. hinges and door latch): Height 1995 mm, Width 1090 mm, Depth 1660 mm External Dimensions (excl. hinges and door latch): Height 1995 mm, Width 1000 mm, Depth 800 mm Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test Volume: approx. 600 liters Data for Temperature Testing: Temperature Range: -70 °C to 180 °C Temperature deviation over time, center of chamber: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal Compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for Climatic Testing Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Temperature deviation over time, center of chamber: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 Humidity fluctuation over time, chamber center: ± 1 to ± 3 % RH Thermal Compensation: 500 W Electrical Data: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16.5 kW Nominal current: 29 A Line protection (customer side): 32 A slow-blow Permissible Test Material Weight: Total load of rack shelves: 80 kg Chamber floor: 80 kg, Shelf: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Lasdpfx Asyglb Sol Nja Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, note the following information! The following steps are carried out in advance for our offered chambers: 1. Functional test and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and error!) We are happy to answer any further questions by phone.

Stanje: dober (rabljeno), Manufacturer: LIEBISCH Type: 42016001 Lajdpfopbv Dpsx Al Noa Test chamber: 1000 liters

Stanje: dober (rabljeno), Leto izdelave: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications that require testing of materials and components under controlled conditions. With its versatile capabilities and user-friendly controls, this programmable unit can simulate a wide range of environmental conditions for scientific research, product testing, and process control. Single-Chamber Operation Data for Temperature Testing Hot Chamber: Lasdpfx Alswbdv So Noa Temperature Shock Test Chamber, volume: 300 l Temperature range: +50 °C to +220 °C Temporal temperature deviation at the center of the workspace: ±1 K Spatial temperature deviation: ±2 K Temperature gradient (according to IEC 60068-3-5): 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air): Heating: 11 K/min Cold Chamber: Temperature Shock Test Chamber, volume: 300 l Temperature range: -80 °C to +70 °C Temporal temperature deviation at the center of the workspace: ±1 K Spatial temperature deviation: 2 K Temperature gradient (according to IEC 60068-3-5): 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air): Heating: 1.5 K/min Cooling: 4 K/min Technical Specifications: Temperature Shock Test Chamber Test chamber volume: approx. 300 l Voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Cooling system: water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber internal dimensions: width 770 mm x depth 650 mm x height 610 mm Overall dimensions: width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our partner bank is also available. komplett-konzept.leasingo.de You can find more articles – new and used – in our shop! International shipping costs available on request!

Stanje: zelo dobro (rabljeno), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Test Chamber, model SAL 1000-FL PLC, ideal for industrial corrosion testing in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Special features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation, and air ventilation tests Technical details: - Outer material: stainless steel 1.4301, powder-coated (custom version) - Test chamber material: stainless steel, ECTFE-coated - Max. test chamber temperature: +80 °C - Temperature stability: ±0.3°K, over time ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Water consumption (humidifier): approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm - Including base cabinet: 2160 x 670 x 1890 mm - Internal test chamber dimensions (W x D x H) / Volume: 1400 x 605 x 920 mm / 1040 l - Max. load on specimen support rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Lsdpfx Aloxnyqve Nsaa Scope of delivery: (see images) (Specifications and technical details subject to change and correction!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss We offer here a Weiss emissions test chamber. Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 mm (Usable height: 1600 mm) Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating range: +18 °C ... +45 °C (for higher temperatures, SHED operation is only possible without Tedlar bags) Lodsmfny Iepfx Al Noaa Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, at rear of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ +18-45 Condition: used Sale from site Scope of delivery: (Only the Weiss emissions test chamber WT 5.1'/ +18-45 Mini-SHED) (Subject to changes and errors in technical data, specifications may be subject to revision!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weather effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Lajdpfxexdl Ixj Al Noa Technical Details - UV Spectrum: approx. 290–450 nm (UVA/UVB) - Lamp Type: Fluorescent UV lamps - Temperature Range (UV phase): approx. +20 to +80 °C - Climate cycling: Alternates between UV exposure, condensation, and spray phases - Humidity range: approx. 10% ... 95% r.h. (relative humidity) at temperatures above approx. +10 °C - Temperature change rate: approx. 3 K/min - Test chamber dimensions (HxWxD): 750 x 650 x 400 mm - External dimensions (HxWxD): 1800 x 920 x 1345 mm - Voltage: 3/N/PE AC 400V +10% 50Hz - Rated power: 9.0 kW Rated current: 15.0 A - Refrigerant: R 404A Important information for your peace of mind as a buyer: The following procedures are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to change, errors and omissions excepted.) We are happy to answer further questions for you by phone.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 58226018400020, Weiss Temperature Chamber Model: WT11-270/70/10 Serial No.: 58226018400020 Controller: Simcon/32-NET Version: 00.1902 Ports: Left side (2x) NW 50 mm, Right side (3x) NW 125 mm Temperature Range: -70°C to +180°C Lajdpov T Tncefx Al Noa Test Chamber Volume: 270 liters Door with window, internal lighting Temperature chamber – water cooled Compressed Air Dryer Type: ZANDER Temperature Change Rate – Cooling: 10 K/min Temperature Change Rate – Heating: 10.0 K/min Temporal Temperature Deviation ±0.1 to ±0.5 K Spatial Temperature Uniformity ±0.5 to ±2.0 K Internal Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Overall Dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated Power: 14 kW Rated Current: 26 A Refrigerants: R-404A / R-23

Stanje: zelo dobro (rabljeno), Vötsch Laedpfxjx Hglyj Al Nja Model: VT³ 7006 S2-M Water-cooled Technical Data: Maximum test specimen weight: 20 kg Test volume: 60 liters Test chamber dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber switch via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm tubing port for specimen measurement/supply SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 8.5 kW · Rated current: 25 A Refrigerants: R-404A, R-23 Weight approx. 800 kg For your safety as a buyer, the following information! The following steps are carried out in advance on our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) If you have any further questions, we will gladly answer them by phone.