Klimatska Testna Celica S Prostornino 11.000 Litrov (11 M³) nakup rabljenega (111.246)

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. Ppodjx Anipopfx Aa Dst For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber allows for the assessment of the function or material properties of test objects under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation rate ensures effective transfer to the test specimen. The air treatment section is located at the rear of the interior chamber. The technical units are housed behind the chamber in a separate frame and are easily accessible. The control system is located in a separate switch cabinet, with the operator panel integrated into the cabinet door. For dehumidifying the test chamber, the unit is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test specimen and radiant heating, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time All technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without any test specimen, irradiation, or additional equipment. Dimensions: Interior (test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm - External dimensions: Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Pedpfjx Eabpjx Aa Dopt Technical Design: Refrigeration unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements on request - Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Pedpfx Aaox Eaxbo Dopt External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Ppedpfex D Abpjx Aa Det Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VCS³ 7034-5 Vötsch climate test chamber, water-cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rates: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climatic test: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation at the center of the test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climatic range: 2°C / 95% r.h. regulated for max 2 hrs) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side port: 50 mm Side port: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10 %, 50 Hz Rated power: 9 kW Rated current: 20 A Required site fuse: 63 A slow-blow Refrigerants: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Podpfx Aeygvn Nea Dopt Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) If you have any further questions, we would be happy to answer them by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: * Cooling: 6.7 K/min * Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climatic Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test Chamber Dimensions (W x D x H): 580 mm x 765 mm x 750 mm External Dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Psdpfeygur Tjx Aa Dspt Refrigerants: R452A / R-23 Important Information for Your Safety as a Buyer: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK3-2200/40/5/V Weiss climate test chamber, water-cooled Specifications for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ±0.8 K Spatial: ±2.0 K Heat compensation: max. 8000 W Specifications for climate tests: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor panel Humidity range: 10 to 95 % r.h. Temporal temperature deviation: ±0.3 K Temporal humidity deviation: ±3 % r.h. Temperature uniformity: Spatial: ±1.0 K Heat compensation: max. 500 W Test room volume: 2160 liters Test room dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions lowered: Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions over shaker: Height 2710 mm External dimensions max. lift height: 3038 mm Changing floor dimensions: Width 1600 mm, Depth 1504 mm Operating data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow Refrigerant: R 404A Weight: approx. 2100 kg For your peace of mind as a buyer, the following is provided: The following checks and procedures are performed on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate Pedpfow I Rxrjx Aa Dopt 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change and error!) Further questions? We are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Ppsdpfjwgaykjx Aa Dst Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Espec Type: EGNX28-6CWL Espec Climate Test Chamber, Water-Cooled Climatic Test Chamber N Series Temperature range: -70 to +180°C Temperature change rate: Heating: 10 K/min Cooling: 5.5 K/min Humidity range: 10 to 95% RH according to diagram Internal dimensions (W x H x D in mm): 1000 x 1000 x 800 External dimensions (W x H x D in mm): 1205 x 1930 x 1960 Ppedpfxsv Duuxe Aa Dst Usable volume: 800 liters Cooling capacity: 3.6 kW at -50°C Heating system: 10 kW Refrigerant: R-404A Refrigerant: R-508A Power supply: AC 400 V, 3-phase, 50/60 Hz, 38A Weight: approx. 695 kg Important safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) Should you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Atlas Type: SC 350 MHG Atlas Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with sun simulation by MHG lamp). This unit is suitable for performing standardized weathering and aging tests under combined exposure to radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Feedthroughs for measurement cables available - Operation via control panel or interfaces (RS232 etc.) - Solid test chamber floor, loadable up to 60 kg (optionally reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 3,300 cm² Weathering: spectrum 300–3,000 nm, Standard-compliant testing according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Sound level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! We carry out the following checks on our offered chambers prior to sale: Pjdpoxbd Rajfx Aa Dept 1. Function test and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors reserved!) Further questions? We will be glad to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK11-1000/40 For sale is a professional climate test chamber Weiss Umwelttechnik WT-WK 1000/40, equipped with a fully automatic cold-regenerating adsorption dryer. The installed components currently in the test compartment can be removed if required. At present, due to these installations, the switch cabinet is limited to an operating temperature range of −40°C to +60°C. After dismantling these components, the manufacturer can extend the temperature range back to the standard values of −40°C to +180°C, as the existing installations are not suitable for these high temperatures. The unit is suitable for precise temperature and humidity testing on components, assemblies, and devices. Ideal for applications in industry, development, quality assurance, and research. Podpfx Aox Hxkzea Dopt Weiss climate test chamber, water-cooled Specifications for temperature testing: - Temperature range: -40°C to +60°C - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Specifications for climate testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% r.H. - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temporal humidity fluctuation at workspace center: ±1 to ±3% r.H. Heat compensation: - Within +25°C to +95°C - At relative humidity up to 90%: 500 W Humidification system specifications: - Reservoir volume: 20 liters - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 µS/cm³ - Water consumption: - At constant +40°C, 92% r.H.: 21/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber interior dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Exterior dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data remain reserved!) Feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC³ 7018 Vötsch Climate Test Chamber, Air-cooled Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 4 K/min Temperature change rate: Cooling 3 K/min Climate Testing: +10°C to +95°C Humidity range: 10% to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Nominal voltage: 400V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation: 1500 W (at 20+) Weight: approx. 460 kg Important information for your security as a buyer: The following procedures are carried out on all chambers we offer prior to sale: Ppsdpfx Asx Hg Uuja Dot 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change or error!) If you have further questions, we would be happy to answer them by phone.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 13.500 kg, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, obremenitev na par nosilcev (maks.): 4.500 kg, število vrst polic: 3, višina okvirja: 4.500 mm, prostor za palete: 117 evropske palete, širina okvirja: 1.100 mm, višina police: 4.500 mm, dolžina police: 34.000 mm, dolžina opore: 2.700 mm, TEŽKO (IZJEMNO TEŽKO) NOSILNI REGALI 3 vrste paletnih regalov vsaka 11,3 m dolžine, 4,5 m višine, 1,1 m globine, vsaka ima 4 polja, 2,7 m širine, nosilnost police 4500 kg! nosilnost polja 13500 kg! - 15 okvirjev (RH4511) RAL5019 - 30 talnih plošč, podložni material, vijačni material - 60 talnih sider (ZZBA1210) Ppjdpfxoyy Unij Aa Det - 54 posameznih prečk (T27155!) RAL2008 - 3 table z nosilnostjo (BSMcP) Okvirji so privijačeni, niso predhodno sestavljeni Prevoz / Dostava: - največ 26 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka je v pristojnosti kupca z lastno dvižno napravo. - Dostave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! - Dostava v države EU po individualnem dogovoru.

Stanje: rabljeno, največja dovoljena obremenitev: 7.500 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2012, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.424 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, Listnato vzmetenje, jekleni platišča, zavorni sistem na stisnjen zrak, bobnaste zavore, kovinsko dno, rabljeno vozilo Ppedpfsy I H Rljx Aa Dot Št. vozila 3296, Münz Otto TDAK 10 tri-stranski prekucnik z znižano nakladalno površino, ABS, pnevmatike: 235/75 R17,5, listnato vzmetenje, bobnaste zavore, 10 vgradnih pritrdilnih ušes na nakladalni površini, 2 vgradni ušesi na sprednji steni, kovinsko nakladalno dno, prednja podporna noga, pocinkano, zadnja nadgradnja znižana za nakladanje gradbene mehanizacije, neprekinjena nakladalna rampa zadaj, višinsko nastavljivo vlečno oje, dimenzije kesona D x Š x V: 5.035 x 2.424 x 400 mm, višina nakladanja cca: 850 mm, lastna masa: 3.500 kg : 11.000 kg, Za vprašanja prosimo , napake in vmesna prodaja pridržane.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 922 h, Artikulirana teleskopska dvižna ploščad Genie Z30/20N * Delovna višina: 11 m * Višina platforme: 9 m * Stranski doseg: 6,5 m * Prebrane delovne ure: 922 * Leto izdelave: 2011 * Pogon preko 48-voltnega elektromotorja z integriranim polnilcem * Dimenzija pnevmatik: 22x7x17 (pnevmatike slabe) Ppjdpfxeyq Al Ns Aa Dst * Globina profila: 0 mm * Ne pušča sledi (non marking) * Medosna razdalja: 1580 mm * Pogonska formula: 4x2 * Skupne mere (dolžina x širina x višina): 5300 x 1200 x 2020 mm * Teža: 6530 kg * Nosilnost košare: 227 kg * Košara vrtljiva * Hidravlična roka košare 1250 mm (vrtljiva) * Dimenzije košare (dolžina x širina x višina): 990 x 650 x 1100 mm * Upravljanje iz košare in tal Dodatni podatki in slike na zahtevo. Opis ni zavezujoča ponudba in lahko vsebuje napake. Brez jamstva za vse podatke. Obiščite tudi našo spletno stran.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, številka stroja/vozila: 2451508, moč: 48 kW (65,26 KM), nosilnost: 400 kg, dvižna višina: 15.030 mm, dolžina platforme: 2.900 mm, širina platforme: 1.190 mm, skupna masa: 4.990 kg, transportna dolžina: 3.270 mm, transportna širina: 1.200 mm, transportna višina: 2.230 mm, vrsta goriva: električni, barva: rdeča, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, Tehnični podatki Letnik izdelave 2020 Motor Električen Delovna višina 17,03 m Višina platforme 15,03 m Dimenzije platforme (D x Š) 2,90 m x 1,19 m Razširitev platforme 1,00 m Dvižna zmogljivost 400 kg Skupne mere (D x Š x V) 3,27 m x 1,20 m x 3,06 m Kot krmiljenja 90° Obratni polmer 2,97 m Podpfxsyqzqwj Aa Dept Skupna teža 4.990 kg Maks. vzpenjalna sposobnost 25% Moč motorja 8 kW, 48 V Popolnoma delujoč, splošne sledi uporabe

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 875 h, Zglobna teleskopska delovna ploščad Genie Z30/20N * Višina ploščadi: 9 m * Delovna višina: 11 m * Stranski doseg: 6,5 m * Število delovnih ur: 875 (odčitano s števca) * Leto izdelave: 2011 * Pogon: 48 V elektromotor z integriranim polnilcem * Velikost pnevmatik: 22x7x17 (pnevmatike dotrajane) * Globina profila: 0 mm Psdpfx Aaoyq Alio Djpt * Pneumatike brez sledi (non marking) * Medosna razdalja: 1580 mm * Priključek koles: 4x2 * Skupne mere (D x Š x V): 5300 x 1200 x 2020 mm * Teža: 6599 kg * Nosilnost košare: 227 kg * Košara vrtljiva * Hidravlična roka košare 1250 mm (vrtljiva) * Mere košare (D x Š x V): 990 x 650 x 1100 mm * Upravljanje iz košare in s tal Dodatni podatki in slike na zahtevo. Ta opis ne predstavlja zavezujoče ponudbe in lahko vsebuje napake. Za točnost podatkov ne odgovarjamo. Obiščite tudi našo spletno stran.

Stanje: novo, Contraves ACB 11 S 30/0/IP AC Servo Motor, serial number as per photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, unused, 100% fully functional, scope of delivery as shown in photos Pjdpfx Aji D Hn Usa Djpt

Stanje: dober (rabljeno), Fan filter, fan assembly, air cooler, control cabinet fan, filter fan - Manufacturer: Siemens, Simatic S5 fan assembly from Demag D 100-275 NC injection moulding machine - Type: 6ES5 981-0 HA 11 - Voltage: 230/115 V - Dimensions: 490/175/H265 mm - Weight: 2.9 kg Psdpfx Aasn Hbb Aj Dept

Stanje: dober (rabljeno), Gear motor, electric motor Ppsdpfx Asb A Rm Nsa Det - Speed: 89 rpm - Power: 0.3 kW - Design: B14 flange, right angle - Shaft diameter: mm - Protection class: IP 65 - Weight: 10 kg

Stanje: skoraj kot novo (rabljeno), 300 linear meters of Nedcon pallet racking New stock, see images! A top racking system from the major manufacturer NEDCON—a subsidiary of Voestalpine AG headquartered in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Load capacity per beam/level: 3050 kg Negotiation price: €50,280 net ex warehouse Offer includes: + 108 preassembled frames, depth 110 cm, height 6.5 m + 642 beams, length 2.7 m, 3050 kg load capacity per level Pjdpfx Aaefi U Afs Djpt + 1,284 locking pins + 216 concrete anchors Load capacity signs, documentation, etc. are included as a matter of course. Further accessories available in the accessories catalogue. Frames: blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load: 12 tonnes, higher loads available on request. Beams: orange RAL 2008. Beam lengths available from stock: 1.85 m, 2.7 m, 3.3 m, 3.6 m. Goods in stock. Transport and assembly available on request. Other configurations available on request. Over 2,000 meters available. Inspection possible at any time by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Specifications, technical data, and prices are subject to change and errors excepted. Subject to prior sale! Please see our General Terms and Conditions. All prices excl. VAT, ex-warehouse.) Purchase / Sale We regularly search for and offer a wide range of items from various sectors. – Broom-clean clearances – Business liquidations – Fast – flexible – efficient! – We clear or dispose for insolvency administrators as well. Send us a brief description and we will get back to you promptly. To visit our page, please click on our logo!

Stanje: novo, Naprodaj električni motor priznanega podjetja ATB Motorentechnik GmbH, proizveden v Nemčiji. Model CD160M-4, v protieksplozijski izvedbi ATEX II 2G, prilagojen za delo s frekvenčnim pretvornikom. Tehnični podatki: • Moč: 11 kW • Tip: CD160M-4 • Napetost: 400 V Δ / 690 V Y • Tok: 21 A / 12,1 A • Frekvenca: 50 Hz • Obrati: 1460 min⁻¹ (4-polni) • Cos φ: 0,85 • Razred izolacije: F • Stopnja zaščite: IP55 • Masa: 168 kg • Leto izdelave: 2007 • ATEX: II 2G EEx de IIC T4 – motor za območja z nevarnostjo eksplozije plina • Gred: premer 42 mm, večzarezna. Pedpoxbd U Eefx Aa Djpt

Stanje: dober (rabljeno), Profesionalni trifazni električni motor priznane nemške družbe KAISER – Elektromotoren-Werke Kaiser. Masivna industrijska zasnova, namenjena neprekinjenemu delovanju v industrijskih strojih, črpalkah, ventilatorjih, obdelovalnih strojih, kompresorjih in tehnoloških pogonih. Motor ima prirubni nosilec in gred s premerom približno 28 mm z utorom za pero. Tehnični podatki: • Proizvajalec: Elektromotoren-Werke Kaiser • Tip: DN 112 S/2 • Moč: 4,0 kW • Napajanje: 380V • Tok: 9,0 A • Frekvenca: 50 Hz • Obrati: 2880 obr/min • Trifazni motor • Premer gredi: cca 28 mm • Prirubno pritrditev • Masivno industrijsko ohišje • Izdelano v Nemčiji Psdpjy Nm Tvsfx Aa Dept Uporaba: • črpalke, • ventilatorji, • industrijski stroji, • obdelovalni stroji, • kompresorji, • tehnološki pogoni, • proizvodne naprave. Stanje: Rabljeno blago. Kaže običajne znake uporabe in skladiščenja. Dejanski videz viden na fotografijah.

Stanje: rabljeno, prevoženi kilometri: 511.972 km, moč: 355 kW (482,67 KM), prva registracija: 01/2022, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, barva: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna dolžina: 6.160 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, Leto izdelave: 2022, Oprema: ABS, drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, parkirna klimatska naprava, parkirni grelec, = Dodatne možnosti in oprema = - Radio s CD predvajalnikom = Dodatne informacije = Splošne informacije Število vrat: 2 Registrska številka: 29-BSH-5 Tehnične informacije Število valjev: 6 Ppsdpey Uh I Sefx Aa Dot Prostornina motorja: 12.902 ccm Največja obremenitev sprednje osi: 8.000 kg Največja obremenitev zadnje osi: 11.500 kg Teže Lastna masa: 8.364 kg Nosilnost: 11.136 kg Največja dovoljena masa: 19.500 kg Največja vlečna zmogljivost: 50.000 kg Notranjost Število sedežev: 2

Stanje: skoraj kot novo (rabljeno), 50 running meters Nedcon pallet racking Brand new, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 7 m Depth: 110 cm, blue Ppsdpfxsfkgq Sj Aa Det Beam length: 2.7 m, orange Beam load capacity per level: 3,050 kg Negotiable price: €10,950,-- net ex stock Offer includes: + 19 pre-assembled frames, depth 110 cm, height 7 m + 144 beams, length 2.7 m, 3,050 kg load/level + 288 clip-on safety pins + 38 concrete anchors Load capacity signage and relevant documents are, of course, included. You will find additional accessories in our accessories catalogue. Frames: blue RAL 5019, bracing galvanized Heights from 2 m up to 7 m available from stock Bay load capacity: 12 tonnes; higher bay loads available upon request Beams: orange RAL 2008 Beam lengths in stock: 1.85 m, 2.7 m, 3.3 m, 3.6 m Goods are in stock. Transport and assembly available on request. Other configurations available on request. Over 2,000 meters in stock. Viewing possible at any time by appointment. Further information available on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, details, and prices as well as prior sale! See our General Terms & Conditions. All prices exclude VAT, ex stock.) Purchase / Sale We are constantly looking to buy and offer various items from different sectors: – Swept-clean company liquidations – Business closures – Quick – flexible – efficient! We also clear out or dispose of properties for insolvency administrators. Write to us with a few keywords, and we will respond promptly. To visit our website, please click on our logo!