Klimatska testna komora s simulacijo sonca

Atlas / Weiss SolarClimatic SC-340

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Hsdow R Rt Iopfx Afwoff Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Type: TS -70/1000-10 Hfedpfx Asxdi Ezefwsf For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical data: Test chamber capacity: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Internal chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion testing: Salt spray test: ambient temperature up to +50°C Condensation water test: ambient temperature up to +45°C Humidifier: +75°C Temperature stability Temporal temperature deviation: ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Hjdpfxjw Hz Tro Afweff Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: novo, Dematic Conveyor Rollers 3000/2500/2000/1500/1000-600-540 RA1938 Gravity Conveyor – Non-powered Roller Conveyors Nominal/Outer Width (NB): 600 mm Available Conveyor Lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further Information Manufacturer: Dematic Type: Roller Conveyor Year of Manufacture: unknown Condition: good (used) Roller Width (RB): 540 mm Roller Pitch: 62.5-125 mm, variable Drive Types: none or head and centre drive Conveyable Goods Weight: up to 30 kg Optional accessories available, e.g.: - Motors with or without frequency inverter by SEW Eurodrive / Movimot - Supports - Side guides Price: Net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For tailored, professional advice, simply get in touch with us. Hodpfx Afok Abmbowoff Contact us by telephone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C Hfjdpfovx S Hhjx Afwof - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SB11/300/40, For sale is a Weiss climate test chamber. Model: SB11/300/40 Temperature operation: -40 to +180 °C Climate operation: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature stability: - In climate mode: ±0.1 to ±0.5 K temporal temperature constancy - In heating/cooling mode (without climate): ±0.2 to ±0.5 K temporal temperature constancy Humidity stability: - Across the entire working range: ±2 to ±3 % r.h. Condenser: air-cooled Temperature change rate: - Cooling: approx. 3.1 K/min - Heating: approx. 3 K/min Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg Hedpjw Dygfjfx Afwsff Connected load: 4.8 kVA Electrical connection: CEE plug 16 A Supply voltage: 400 V / 3Ph + N + PE / 50 Hz (+6% / -10%) Refrigerant: R404A Design: mobile Type: SB11/300/40

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary Hfjdpfjxr A R Tex Afwof 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weather effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details - UV Spectrum: approx. 290–450 nm (UVA/UVB) Hfodpfx Ajxdl Ixjfwjf - Lamp Type: Fluorescent UV lamps - Temperature Range (UV phase): approx. +20 to +80 °C - Climate cycling: Alternates between UV exposure, condensation, and spray phases - Humidity range: approx. 10% ... 95% r.h. (relative humidity) at temperatures above approx. +10 °C - Temperature change rate: approx. 3 K/min - Test chamber dimensions (HxWxD): 750 x 650 x 400 mm - External dimensions (HxWxD): 1800 x 920 x 1345 mm - Voltage: 3/N/PE AC 400V +10% 50Hz - Rated power: 9.0 kW Rated current: 15.0 A - Refrigerant: R 404A Important information for your peace of mind as a buyer: The following procedures are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to change, errors and omissions excepted.) We are happy to answer further questions for you by phone.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 58226018400020, Weiss Temperature Chamber Hfedpfxev T Tncj Afwsf Model: WT11-270/70/10 Serial No.: 58226018400020 Controller: Simcon/32-NET Version: 00.1902 Ports: Left side (2x) NW 50 mm, Right side (3x) NW 125 mm Temperature Range: -70°C to +180°C Test Chamber Volume: 270 liters Door with window, internal lighting Temperature chamber – water cooled Compressed Air Dryer Type: ZANDER Temperature Change Rate – Cooling: 10 K/min Temperature Change Rate – Heating: 10.0 K/min Temporal Temperature Deviation ±0.1 to ±0.5 K Spatial Temperature Uniformity ±0.5 to ±2.0 K Internal Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Overall Dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated Power: 14 kW Rated Current: 26 A Refrigerants: R-404A / R-23

Leto izdelave: 2016, obratovalne ure: 14.242 h, stanje: zelo dobro (rabljeno), Vötsch temperaturna testna komora, vodno hlajena Tukaj vam ponujamo Vötsch temperaturno testno komoro. Vötsch 7060-5 vodno hlajena komora Dimenzije testne komore: višina: 950 mm, širina: 800 mm, globina: 800 mm Zunanje dimenzije: višina: 1995 mm, širina: 1090 mm, globina: 1960 mm Kapaciteta testne komore: približno 600 litrov Letnik izdelave: 2016 Delovni čas: 14.242 ur Hodpfst Txqrox Afwsff Priključne odprtine: R1: NW 125 mm L1: NW 50 mm Podatki za temperaturne teste: Temperaturno območje: -72°C do +180°C Temperaturno odstopanje v času v središču uporabnega prostora: ± 0,1 do ± 0,5 K Prostorsko temperaturno odstopanje: ± 0,5 do ± 2,0 K Hitrost spremembe temperature: Segrevanje: 6,0 K/min Hlajenje: 6,0 K/min Kompenzacija toplote pri 20°C: maks. 5000 W Kompenzacija toplote pri -20°C: maks. 5000 W Električni priklop: Nazivna napetost: 3/NPE AC 400V ±10% 50Hz Nazivna moč: 13,0 kW Nazivni tok: 23,0 A Hladilno sredstvo: R-404A in R-23 Teža (približno): 650 kg Za vašo varnost kot kupca upoštevajte naslednje: 1. Komora deluje brezhibno. 2. Nobene komponente ni potrebno zamenjati. 3. Hladilno sredstvo je napolnjeno skladno z zakonodajo. Stanje: rabljeno (odlično) (Spremembe in napake v tehničnih podatkih in specifikacijah so pridržane!)