Homag Enota Za Brušenje S Trakom nakup rabljenega (123.707)

Stanje: rabljeno, Aggregate module, finishing unit, sanding unit, sanding station, belt sanding machine, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sanding machine - Origin: from a Homag edge banding machine - Swiveling - Height adjustable - Max. sanding belt width: 80 mm - Oscillating - Sanding shoe: with air cushion - Drive: 1.1/1.4 kW Prodpfjb Uhvlox Amfoa - Speed: 1425/2850 rpm - Sanding shoe dimensions: L/W mm - Quantity: 1 piece available - Dimensions: 1000/1200/H1000 mm - Weight: 292 kg/piece

Stanje: novo, Leto izdelave: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding off Powerful motors with vibration-free operation to achieve optimal grinding results Working height adjustable via continuously tilting sanding unit Workpiece support adjustable in angle Continuous flat grinding surface allows processing of long workpieces Each with a dust extraction port at the spark box and at the rear belt roller Protective screen can be folded away Sandpaper belt change in seconds thanks to quick-release system Simple belt tracking adjustment via set screw Motor with brake and safety switch Predpfx Ajhk Df Demfea Dimensions and Weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Extraction Nominal extraction port diameter (external) 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Noise Emission Sound pressure level at workplace Lp (idle without extraction) 80 dB(A) Sanding Unit Max. sanding width 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed 30 m/s Contact wheel diameter 200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, I am selling a COSTA K CCC 1350 wide belt sander, year of manufacture 2004. Configuration: - 55 kW steel calibration roller - 45 kW hard rubber sanding roller - 37 kW soft rubber sanding roller - Cleaning unit: combination brush + blower at the rear - Working width: 1350 mm Prodpfx Amot Rn E Tofja - Pressure steel guides for short components - Compressed air cleaning for all units 3 motors: 55 + 45 + 37 kW Including complete documentation. Condition: very good! Available immediately.

Stanje: rabljeno, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic chuck: 115 x 115 mm Clamping range: 110 x 75 mm Construction height of magnetic plate: 119 mm Workpiece dimensions (L x W x H): max. 60 x 100 x 50 mm Power consumption: 1 ampere Operating voltage: 24 volts, DC (V/DC) - Mechanically switchable permanent magnet Dimensions (L x W x H): 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for use in cutting tool and die making for tapered, back-ground cutting plates or mold inserts. Psdpfxsdz Sqxs Amfora

Stanje: novo, Tip RP630 Psdpfofhnx Nex Amfsra Delovna širina 630 mm Minimalna delovna dolžina 500 mm Delovna debelina 3–110 mm Hitrost podajanja 6–30 m/min Skupna moč motorjev 9,25 kW Moč agregatnega motorja 7,5 kW Motor podajalnega mehanizma 1,5 kW Dvižni motor 0,25 kW Premer valja 190 mm Dimenzije brusnega traku 650 x 1920 mm Obratovalni zračni tlak 0,6 MPa Pretok odsesovalne naprave 4000 m³/h Transportne mere 1200 x 1750 x 2400 mm Teža 1100 kg

Stanje: novo, ATEX version Gear-driven radial fan Podpsh Ucqtjfx Amfora Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level 78 dBA Foldable side and rear walls (rear wall with extraction function) Working area: 2500 x 800 mm Working height: 930 mm Incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow: 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter: 320 mm Filter cartridge length: 600 mm Total filter surface: 34.8 m² Noise level: 78 dBA Compressed air: 5–7 bar Note on used machinery: • Specifications subject to change and prior sale. • All prices are ex works, loaded free of charge at site. • The machines have been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Naprodaj profesionalni sistem za spenjanje tovora na paletah priznane nemške znamke ErgoPack. Model 725E je popolnoma električna naprava, ki omogoča varno in hitro spenjanje palet brez potrebe po sklanjanju – idealno za skladišča, logistiko in proizvodnjo. GLAVNE PREDNOSTI: - avtomatsko vodenje traku okoli palete - elektronsko upravljanje 24V - načini delovanja: AUTO, MAN, SOFT - nastavitev napetosti traku - maksimalna napetost traku do 2500N - ergonomično upravljanje brez napora za operaterja - mobilna zasnova na kolesih Predpfx Amjyw Iagefja - švicarska kakovost izdelave (Swiss Made komponente) TEHNIČNI PODATKI: - Proizvajalec: ErgoPack Deutschland GmbH - Model: 725E - Napajanje: 24V DC - Maks. napetost traku: 2500N - Stanje: rabljeno, dobro ohranjeno - Priložen polnilec STANJE: - Naprava je popolnoma kompletna. - Vidne so običajne sledi uporabe zaradi dela. - Kontrolna plošča deluje, stroj je pripravljen za uporabo. UPORABA: - skladišča - logistični centri - proizvodnja - transport in pakiranje palet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, 1,0 rabljena brizgalna naprava z robotom Proizvajalec: ENGEL Tip: VICTORY 330/80 TECH Letnik: 2012 Zaključna sila: 80 ton Pjdoztp Ihjpfx Amfsra Razdalja med stebri: BREZ STEBROV Premer vijačnega valja: 35 mm Maksimalna prostornina vbrizga: 110 cm³ Teža brizganega dela: 100 g/ciklus Krmilnik: CC200 Oprema: - Robot, proizvajalec: SEPRO, tip: AXESS - 2 x jedrna vleka - Izpihovni ventil - Transportni trak - Varnostna ograja

Stanje: dober (rabljeno), ErgoPack 712E stroj za povezovanje palet Naprava za povezovanje tovora s PP in PET trakovi Izdelano leta 2016 Zelo dobro ohranjeno Model 712E s toplotnim varilcem in »repkem«, ki prehaja skozi paleto in dovaja trak operaterju brez potrebe po sklanjanju. Psdpfx Amozt H Skofsra Opis proizvajalca: ErgoPack 712 E se uporablja za povezovanje skoraj vseh vrst tovora s PP (polipropilenski) ali PET (poliesterski) trakom. Naprava je popolnoma avtomatska (napenjanje, varjenje in rezanje traku). Odlikuje jo visoka učinkovitost in enostavna uporaba, kar zagotavlja odlične rezultate z minimalnim fizičnim naporom. Naprava se upravlja preko nadzorne plošče. Priložena je dokumentacija, polnilec in set orodja.

Stanje: rabljeno, Leto izdelave: 1998, Tehnični podatki: - Proizvajalec: Ernst - Tip: BM 2 - 1300 - Letnik: 1998 - Največja širina krtače: 1.300 mm - Največji premer krtače: 400 mm - Največja delovna višina: 100 mm - Motorji krtače: 2 × 5,5 kW - Vakuumski motor – nazivna moč 7,5 kW - Vakuumski motor – hitrost vrtenja 2.800 vrt/min - Motor za nastavljanje višine – nazivna moč: 0,45 kW - Motor za nastavljanje višine – hitrost vrtenja 1.410 vrt/min - Hitrost vrtenja krtače 30–350 vrt/min - Hitrost podajanja 3–15 m/min - Teža: 1900 kg 2.5 ELEKTRIČNI PRIKLJUČEK - Delovna napetost 400 V - Frekvenca 50 Hz - Varovalka (zagotovi stranka) 63 A - Polni obremenitveni tok: 47 A - Presek napajalnega kabla mora biti najmanj AWG 2 (25 mm2). 2.6 PNEVMATIČNI PRIKLJUČEK - Delovni tlak 6–8 bar - Mejni tlak 8 bar 2.7 PRIKLJUČEK ZA ODVOD - Velikost priključka 4 x Ø = 140 mm - Potrebna količina zraka 1.108 m3/h na priključek - Najmanjša hitrost zraka na priključku na stroju 20 m/s Prjdpfezubpaox Amfoa - Podtlak na priključku za odvod 1.180 Pa Za napravo za pihanje: - Velikost priključka 3 × Ø = 80 mm - Potrebna količina zraka 390 m3/h na priključek - Najmanjša hitrost zraka na priključku na stroju 20 m/s - Podtlak na priključku za odvod 950 Pa - Vakuumski izhod 1 × Ø = 200 mm, 300 m3/h

Stanje: rabljeno, Leto izdelave: 2001, This machine will be equipped with a new Siemens PLC and touch panel. Technical data: Podpfxsxtakme Amfjra - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of construction: 2001, retrofit in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum conveyor belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 units, 2.2 kW each, with thermal contact - Feed motor: 1 unit, 1.5 kW, with thermal contact - Vacuum motor: 1 unit, 5.5 kW - Roller height adjustment axis: 1 unit, 0.18 kW - Feed rate: 2–10 m/min, frequency-controlled - Brush rotation speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400V, 50Hz - Electrical connected load: 15 kW - Fuse: 63A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (provided by customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight (including control cabinet): 2,220 kg - Colour: RAL 7035 light grey/black - Operator side: left/right - Brush change side: right - Ex version: No - Location: in stock Blomberg

Stanje: zelo dobro (rabljeno), Pot hinge boring machine with pressing device Pneumatic clamps Prsdpfx Amet Tbutsfsa Foot pedal, stop rail, and stand Some drill bits included

Stanje: pripravljen za uporabo (rabljen), Max. operating temperature: 1120°C, heated length: 1000 mm, cooling length: 1850 mm, channel height: 40 mm, conveyor belt width: 110 mm, throughput speed: 100–1000 mm/min, split gas consumption: 1.5–2.5 Nm³/h, control panel: Siemens SIMATIC HMI, length: 5000 mm, width: 650 mm, height: 1350 mm, with integrated ammonia cracker GSP 25 FA, integrated gassing panel, protective gas supplied from ammonia cracker (ammonia supply by customer) + N2 purge gas as required, MSR unit with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection possible. Prjdoq Ttz Eopfx Amfea

Stanje: novo, Pekač s ognjeodporno šamotno ploščo Transportni trak s trakovi iz ognjevzdržnega kamna Samomazalni ležaji za poenostavljeno vzdrževanje Sprednja stran, stranice, zgornji del in notranjost iz nerjavečega jekla Funkcija Eco za preklop pečice v stanje pripravljenosti med delovnimi premori za varčevanje z energijo Digitalno upravljanje časa peke in hitrosti transportnega traku Širina transportnega traku: 800 mm Električna moč: 17-34 kW Zunanje dimenzije: 95 x 145 x 110 cm Prsdpfxour Tigo Amfja Najvišja delovna temperatura: do 450°C

Stanje: dober (rabljeno), Proizvajalec: MOSCA, Tip: RO-M-P2, Leto izdelave: 1997, Serijska št.: 46957 Pedpfx Amey Ez Tiefora

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable rubberized conveyor belt Infinitely variable feed rate Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for sensitive materials. Unit for saw-cut effect available as an option Motorized height adjustment of the units Prsdpfx Ameff Hdgefea Units can be switched on individually Infinitely adjustable feed rate Dimensions and Weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Connection for dust extraction Extraction connection diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Speed 1500 min⁻¹ Electrical Data Drive motor power 2 x 3.0 kW Feed motor power 0.22 kW Total power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise Emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding Unit Max. sanding width 300 mm Feed Unit Feed speed 1 – 13 m/min Workpiece Max. height 300 mm Max. weight 100 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, CORMAK BA158 je polavtomatski stroj za vezanje, namenjen hitremu in ponavljajočemu se varovanju kartonov, paketov, škatel, svežnjev in skupinskih embalaž s polipropilensko trakmo PP. Naprava zmanjšuje število ročnih opravil in izboljšuje pripravo izdelkov za pošiljanje ali skladiščenje. Po tem, ko operater ročno namesti trak okoli izdelka, naprava izvede preostale korake cikla vezanja. Vgrajeni napenjalnik skrbi za napetost traku, mehanizem za varjenje pa izvede termično povezavo in odreže odvečni material. Postopek ne zahteva uporabe dodatnih kovinskih ali plastičnih zaponk. Prednosti uporabe stroja za vezanje BA158: * hitrejša priprava kartonov, paketov in skupinskih embalaž za transport, * zmanjšanje ročnega dela zahvaljujoč avtomatskemu napenjanju, varjenju in odrezu traku, * ni potrebe po uporabi dodatnih zaponk, * ponavljajoče se in enakomerno vezanje embalaž, * možnost prilagoditve napetosti traku glede na vrsto izdelka, ki se varuje, * enostavno vezanje izdelkov različnih dimenzij, * prihranek prostora na delovnem mestu zahvaljujoč kompaktni konstrukciji, * enostavno priključitev naprave na standardno vtičnico 230 V. Uporaba: Polavtomatski stroj za vezanje s trakom CORMAK BA158 je primeren za varovanje: * pošiljkih v kartonih, * kurirskih paketov, * škatel in skupinskih embalaž, * svežnjev tiskovin, katalogov in grafičnih materialov, * delov in komponent, * lesnih in mizarjskih elementov, * izdelkov, ki jih prodajajo spletne trgovine, * izdelkov, ki se pripravljajo za transport ali skladiščenje. Naprava se lahko uporablja v skladiščih, proizvodnih obratih, veletrgovinah, e-trgovinah in oddelkih za pakiranje in pošiljanje. Električni stroji za vezanje te vrste izboljšajo izvajanje ponavljajočih se operacij, povezanih s pripravo izdelkov za transport in skladiščenje. Polavtomatski cikel vezanja: Po tem, ko operater namesti trak okoli izdelka, postavi njegov konec v mehanizem stroja za vezanje. Naprava samodejno izvede napetje, termično varjenje in odrez traku. Maksimalna sila vezanja je 400 N. Ponavljajoči se način delovanja pomaga ohranjati enotno kakovost varovanja posameznih izdelkov. Odprt delovni prostor: Konstrukcija brez zaprtega okvirja olajša postavitev izdelkov različnih dimenzij in oblik na delovno površino. Rešitev je primerna pri vezanju embalaž in paketov različnih velikosti. Odprta konstrukcija tudi olajša obračanje in premikanje izdelka med izvajanjem več obročev na različnih mestih. PP trak širine 5–15,5 mm: Stroj za vezanje obdeluje polipropilenski trak PP širine od 5 do 15,5 mm. Ta razpon omogoča izbiro traku, primernega za vrsto embalaže in zahteve postopka pakiranja. Naprava deluje z zvitki traku z notranjim premerom 200 mm, zunanjim premerom do 450 mm in širino 200 mm. Model: CORMAK BA158 Vrsta naprave: polavtomatski stroj za vezanje Vrsta traku: PP Širina traku: 5–15,5 mm Maksimalna sila vezanja: 400 N Način povezave traku: termično varjenje Notranji premer zvitka: 200 mm Zunanji premer zvitka: do 450 mm Širina zvitka: 200 mm Višina delovne površine: 765 mm Napajanje: 230 V Moč: 0,3 kW Psdpfx Amjzq Adqjfera Dimenzije: 855 × 540 × 765 mm Masa naprave: 50 kg

Stanje: rabljeno, Rabljeni stroj Rabljeni stroj za vrtanje okovja Hettich Blue Max Moč motorja: 0,8 kW Hitrost motorja: 2800 obr/min 4 vrtalne vretena z vzdolžnimi prisloni en nožni pedal Stisna matrica manjka!! Prodpew I Um Tofx Amfoa Razpoložljivost: po dogovoru Lokacija: Solingen

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenarska rezkalnica s štirimi glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Moč motorjev: Leva stran: motor za rezkanje 1 = 7,5 kW motor za rezkanje 2 = 5,5 kW Podpsx Hwmbsfx Amfjra motor za rezkanje 3 = 3 kW (pri 1440 vrt/min) ali 5 kW (pri 2880 vrt/min) motor za brušenje 4 = 3 kW Desna stran: motor za rezkanje 1 = 7,5 kW motor za rezkanje 2 = 5,5 kW motor za rezkanje 3 = 3 kW (pri 1440 vrt/min) ali 5 kW (pri 2880 vrt/min) motor za brušenje 4 = 3 kW Hidravlične enote: 4,8 + 4 kW Skupna moč brez hidravličnih enot: 38 ali 42 kW Skupna moč z hidravličnimi enotami: 46,8 ali 50,8 kW Dimenzije: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton.

Stanje: rabljeno, Stranski spenjalnik za škatle s pištolami in uvodnim trakom Prsdperwrlaofx Amfsa

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, -WAG 917- Ponujamo rabljeno strojno napravo za peskanje s tekočim abrazivom proizvajalca Wheelabrator, tipa T85. Naprava je rabljena, vendar je v celoti funkcionalna. Prodpfx Aezktvqemfea Proizvajalec: Wheelabrator Tip: T85 Številka naprave: 6610246 Skupna širina: približno 2300 mm Širina transportnega traku: približno 750 mm Skupna višina: približno 3250 mm Skupna globina: približno 2100 mm Leto proizvodnje: 1996 Naprava je razstavljena in je ni mogoče preizkusiti na licu mesta pod napetostjo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 81 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: CE označba, Na voljo za prodajo je brusilni stroj z dolgo brusilno trakovo NS LMD2500 2Z, letnik 2022, v stanju kot nov. Stroj ima le 81 delovnih ur. Predpfx Amoy Httqsfoa Podrobnosti o stroju Proizvajalec: NS Model: LMD2500 2Z Tip stroja: Brusilni stroj z dolgo brusilno trakovo Leto izdelave: 2022 Delovne ure: 81 Stanje: Kot novo Stroj je popolnoma delujoč in na ogled po predhodnem dogovoru. Za dodatna vprašanja ali več informacij nas kontaktirajte preko sporočila.

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Weight: 7.5 kg Number of strokes: 2000 strokes/min Torque: 15 kp Dimensions (L x W x H): 170 x 160 x 130 mm Prodpfxju Nkk Ro Amfoa PNEUMATIC CLAMPING UNIT - Application: Operation of vise clamping - Consists of pneumatic motor, impulse mechanism, and control mechanism. - Compressed air required - Average operating pressure: 0.4–0.6 MPa - Air consumption: 1.1 m³/min at 0.5 MPa - Vise clamping force: 80 kN Accessories: - Operating manual - 13 units available As per illustration.

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Grinding wheel dimensions: Dm. 200x78x78 mm Speed: 2,800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Motor power: 3.6 kW Pedpfx Amsyv Iqvjfsra Length: 1,020 mm Width: 820 mm Height: 2,170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model, but features an extended, quadruple-mounted column with an additional robust column support. Thanks to its rigidity and geometric stability, this surface grinder is ideal for machining precision components of considerable height, whether single pieces or serial production parts from toolmaking, molds, dies, gears, and more. The vertical spindle nuts and the alignment pins of the axes on this fixed-table grinder also ensure consistently optimal working conditions. Cast iron bed for lasting geometric stability. Cast iron column, protected by bellows and mounted in four adjustable precision bearings, generously sized for this type of fixed-table grinder. Three-phase motor with double-jacket air cooling prevents overheating during continuous operation and keeps the temperature of the motor shaft and bearings consistent. The hardened, ground, and dynamically balanced shaft, mounted in precision ball bearings, is generously sized for this grinder type with a fixed table and self-adjusting via spring-preloaded tension to absorb thermal expansion. The vertical spindle is mounted in opposing, adjustable ball bearings, ensuring free movement in the grinding area and preventing dust accumulation. Metal bellows offer optimal protection for the vertical spindle. Opposing bronze nuts compensate for long-term wear of the vertical spindle on this fixed-table grinder. Alignment pins align the grinder motor on the axis, ensuring parallel surfaces over the long term. The grinder handwheel is triple-supported and connected to the spindle via two helical gears. It features a graduated dial, supported by an axial bearing, enabling material removal of 0.01 - 0.02 - 0.03 mm per pass. Rapid traverse per handwheel revolution is 2 mm. A dial with lever provides programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per impulse, simplifying operation by eliminating continuous step control. A slot allows optimal use of the grinding wheel’s working height and clamping of non-magnetic parts and accessories, such as magnetic chucks, self-centering chucks, and angle plates. Low-voltage controls, safety devices, indicator lights, and all necessary equipment ensure compliance with safety and regulatory standards for this class of fixed-table grinding machine. Handles, design, and dimensions of the fixed table grinder meet current ergonomic standards...

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 16 letvica, skupna širina: 387 mm, skupna dolžina: 565 mm, skupna višina: 1.007 mm, skupna masa: 75 kg, pritisk: 16 letvica, obratovalni tlak: 8 letvica, raven hrupa: 120 dB, dolžina paketa cevi: 7.000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing unit) for fine cleaning using micro-particles as well as aggressive blasting on demanding surfaces. The patented IS 10 dry ice mill allows you, when necessary, to crush 3 mm dry ice pellets into 1.5 mm micro-pellets, making it possible to clean sensitive surfaces such as polished components, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any compressed air loss. The operating pressure ranges from 1–16 bar. The compressed air supply hose is 10m long. The integrated flow system prevents freezing and subsequent clogging at the outlet of the hopper. The design of the tube and hose system prevents pellet breakage. The blasting gun is ergonomically shaped, robust, safe, and easy to operate. Optionally, the blasting gun can be supplied with an LED lamp. The stainless steel frame and machine housing guarantee a long service life. Even under the most demanding operating conditions, the machine requires only minimal maintenance costs. The stainless steel feed hopper has a capacity of 13 kg. The dry ice consumption ranges from 10–100 kg/h. Included accessories: Prjdpfx Amjwum Svefsa - RN-10-08 round jet nozzle - Flex Case II Plus nozzle case (14 pieces) - External module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Belt-mounted compressed air regulator - 10m breathing air supply hose - Breathing air conditioning unit - Ice scoop