Holzhäuer Maschinenbau Gmbh Hidravlični Kabelski Vitel Radio 1700 Kg Vleka nakup rabljenega (102.670)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Ledpfx Abjdf Ufps Hshk Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Article number: HAW1700-EV-RC

Stanje: novo, Hydraulic Winch HAW3000 with Electric Valve and Radio Remote Control for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. The hydraulic attachment winch HAW3000 makes many tasks much easier. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm steel cable. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm steel cable. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard configuration: 30 m of 8 mm steel cable ⦁ For use in viticulture, agriculture, forestry, and landscaping ⦁ In building construction, civil engineering, and road construction Ljdpfefn Tu Tox Ab Hehk ⦁ For pulling out root stumps and trees ⦁ As an attachment winch for forwarding cranes and excavators ⦁ As a winch for tractors, machinery, and grape harvesters Robust steel design with 3-way mounting options (left, right, rear) using M12 threaded holes. This offers multiple possibilities for attaching the winch. (Threads are cut and painted. For rust protection, threads must be recut before use.) Large lubricatable cable reel for long service life of the steel wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, temporarily up to 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Colour: red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Contact us – we’re happy to advise you.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03-2018, Prodamo odlično ohranjen in polno delujoč polavtomatski stroj za valoviti karton priznanega proizvajalca EMproject 89. Stroj je bil izdelan leta 2018 in je zasnovan za zanesljiv ter natančen dvobarvni tisk na kartonsko embalažo. Lsdpfszilvgsx Ab Hehk Stroj je trenutno priklopljen na električno omrežje in je v popolnosti delujoč. Idealen je za tisk logotipov, črtnih kod in grafik na selitvene, industrijske ali transportne škatle v enem prehodu. Glavne tehnične specifikacije: Proizvajalec: EMproject 89 (Srbija) Model: FLEXO PRINTER MS-1700/1400 Letnik izdelave: 03 / 2018 Število barv: 2 (dvobarvni tisk) Maksimalni format kartona: 1700 mm x 1400 mm Napetost: 220 V Stanje: Polno delujoč, vzdrževan, možen preizkus pred nakupom. Stroj se nahaja v Sloveniji (Celje). Kupec sam organizira demontažo in prevoz. Za resnega kupca ob ogledu stroja možnost dogovora o končni ceni. Na voljo imamo tudi preostalo opremo za proizvodnjo kartonaže (rotacijski izsekovalnik, zlagalno-lepilna linija).

Stanje: novo, Hydraulic Cable Winch HAW4000 without Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the hydraulic attachment winch HAW4000, you can simplify numerous tasks. Maximum cable capacity at 4,000 kg pulling force: 60 m using 10 mm wire rope. Maximum cable capacity at 3,000 kg pulling force: 90 m using 8 mm wire rope. Maximum cable capacity at 1,700 kg pulling force: 150 m using 6 mm wire rope. Maximum cable capacity at 3,500 kg pulling force: 150 m using 6 mm synthetic rope. Maximum cable capacity at 2,000 kg pulling force: 220 m using 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ For viticulture, agriculture, forestry, and horticulture ⦁ For construction, civil engineering, and road construction ⦁ For pulling out stumps and trees ⦁ As an auxiliary winch on skidding cranes and excavators ⦁ As a winch for tractors, agricultural machinery, and grape harvesters A robust steel construction with 3-way mounting options (left, right, rear) using M16 threaded holes, offering multiple possibilities for winch attachment. (Threads are cut and painted. For corrosion protection, they must be recut before use.) Large, greaseable cable roller for a long service life of the wire rope. ⦁ Maximum operating pressure: 210 bar peak ⦁ Oil flow up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4,000 kg ⦁ Cable speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Color: red The winch can be mounted in various positions. A hydraulic brake is available as an option. Depending on your required pulling speeds and forces, we can offer different options. Contact us – we are happy to advise you. Lhodpfofn Tvisx Ab Hok Dimensions: ⦁ Length: 850 mm ⦁ Length with cable inlet: 970 mm ⦁ Width front: 200 mm ⦁ Width rear: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: novo, Hydraulic Winch HAW1700 with Electric Valve incl. Manual Control and Wireless Remote Control for mounting on log splitters, cranes, mini excavators, tractors, forklifts, slope mowers, and telehandlers—in viticulture, horticulture, agriculture, construction, forestry, and many other applications. Equipped with an electric hydraulic valve and radio remote control. The HAW1700 hydraulic add-on winch makes many tasks easier. Maximum cable capacity: 30 m with 6 mm steel cable. Standard equipment: 20 m of 6 mm steel cable Lsdpfxofn Tvhe Ab Hjhk ⦁ Skidding firewood to the log splitter and positioning it ⦁ Pulling timber onto trailers ⦁ Extracting stumps and trees ⦁ As an auxiliary winch for forestry cranes and small excavators ⦁ Winch for small tractors and narrow-gauge tractors Robust steel construction with mounting possibilities on both sides (bottom, rear, top) with M12 threads. This provides flexible application options for the winch. Large, double-supported cable sheave for long service life of the steel cable. Standard pulling force is 1700 kg. The winch can be installed in various positions. Optional hydraulic brake available. Depending on the pulling speed and force you require, we can offer different configurations. Contact us—we are happy to advise you. ⦁ Maximum operating pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 cc ⦁ Torque at 225 bar: 870 Nm (peak) ⦁ Continuous torque: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Cable speed: 47 m/min at 60 L/min oil flow ⦁ Colour: red ⦁ Including hoses from valve to motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope guide: 570 mm ⦁ Width (front): 120 mm ⦁ Width (rear): 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Wireless remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature range: -35°C to +80°C ⦁ Protection class: IP65

Stanje: novo, Hydraulic Winch HAW4000 with Electric Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the HAW4000 hydraulic attachment winch, you can significantly ease a wide variety of tasks. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard configuration includes 50 m of 10 mm wire rope. ⦁ Suitable for viticulture, agriculture, forestry, and horticulture ⦁ For building construction, civil engineering, and road construction ⦁ For pulling out rootstocks and trees ⦁ As an attachment winch for timber cranes and excavators ⦁ As a winch for tractors, work machines, and grape harvesters Robust steel construction featuring mounting options on three sides (left, right, rear) with M16 threaded holes. This allows for a wide range of installation configurations. (Threads are machined and painted; for corrosion protection, threads must be re-cut before use.) Large, greaseable cable pulley ensures long service life for the wire rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow: up to 200 l/min, temporarily max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Colour: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on your required pulling speed and force, we can offer you different options. Please contact us for expert advice. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm ⦁ Width (front): 200 mm ⦁ Width (rear): 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Total width: 650 mm Ljdpsfn Tvkjfx Ab Hehk ⦁ Height: 420 mm

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit Lhedpfx Absyt Nm Ss Hok

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, vhodna napetost: 380 V, Oprema: dokumentacija / priročnik, Stroj za brušenje in ostrenje tračnih žag in žagatih listov iz CrV jekla. Lhedszv H Uwopfx Ab Hjk

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Lhodpfsyzxfnsx Ab Hjk Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 0705012, Load capacity 10,000 kg Lhjdpoiqhi Tefx Ab Hek Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar up to max. 80 bar Flow rate 19 liters/min up to max. 272 liters/min Hydraulic motor: Rexroth Hydraulic control block with mounting frame Documentation and inspection book available The winch was used on a test bench / test tower. Space requirements (L x W x H): 2,100 x 1,400 x 1,300 mm, complete with control block Weight approx. 1,500 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: RAS, model krmilnika: 4,0, delovna širina: 3.200 mm, nastavitev spodnjega nosilca: 650 mm, nastavitev pregibne grede: 150 mm, vgradna višina: 2.200 mm, globina grla: 1.000 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 25 mm, minimalni polmer upogibanja: 1 mm, obratovalna hitrost: 120 mm/s, hitrost vzvratne vožnje: 200 mm/s, število osi: 4, tip kronanja: CNC krmiljen, najv. debelina pločevine: 4 mm, najv. debelina jeklene pločevine: 3 mm, maks. debelina pločevine iz nerjavečega jekla: 2 mm, maks. debelina aluminijaste pločevine: 4 mm, hitrost zadnjega prislona os R: 200 mm/s, Razdalja pomika zadnjega prislona, os R: 150 mm, pomik zadnjega naslona os Z: 3.250 mm, skupna masa: 11.500 kg, skupna dolžina: 5.600 mm, skupna širina: 3.360 mm, skupna višina: 2.200 mm, vhodna napetost: 400 V, vhodni tok: 32 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, nujno zaustavitev, PRODAM CNC KRIVILNI STROJ RAS XLTBEND 71.30 UPDOWN Cena: 250.000 EUR neto – po dogovoru Na prodaj je vrhunski CNC krivilni stroj RAS XLTbend 71.30 UpDown priznanega nemškega proizvajalca RAS Reinhardt Maschinenbau GmbH. Stroj je namenjen profesionalni izdelavi delov iz jeklenih, nerjavečih in aluminijastih pločevin. Tehnologija UpDown omogoča krivljenje gor in dol brez obračanja obdelovanca, kar bistveno skrajša čas proizvodnje in poveča učinkovitost. TEHNIČNI PODATKI: • Delovna dolžina: 3200 mm • Največja debelina pločevine: - običajno jeklo: 3,0 mm - nerjavno jeklo: 2,0 mm - aluminij: 4,0 mm • Višina odprtine preme: 150–650 mm • Avtomatska CNC nastavitev parametrov krivljenja • Servopogoni delovnih osi • Tehnologija Beam-in-Beam za zelo visoko natančnost krivljenja • CNC upravljanje z 3D vizualizacijo OPREMA: • CNC upravljanje XLTbend • Dva 24" zaslona na dotik • Uvoz STEP, DXF, GEO datotek • Avtomatsko generiranje programov krivljenja • 3D simulacija procesa krivljenja • „T” pozicijska miza • Pozicionirni sistem s priseski • Avtomatsko zaporedje krivljenja • Klimatizirana krmilna omara • Varnostni in diagnostični sistem PREDNOSTI: • Zelo visoka proizvodna učinkovitost • Minimalna potreba po vmešavanju operaterja • Možnost izdelave zahtevnih kosov brez prelaganja pločevine • Idealno za izdelavo ohišij, kaset, krmilnih omar, prezračevalnih elementov in konstrukcijskih delov iz pločevine Stanje: zelo dobro Lokacija: Skarżysko-Kamienna, Poljska Cena: Lodpfxozfvkgo Ab Hshk 250.000 EUR neto – po dogovoru Kontakt: Kamil Wiatrak

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Na prodaj je izjemno učinkovit, popolnoma usklajen kombinirani reciklirni sistem vodilnega nemškega proizvajalca WEIMA, ki ga sestavljajo enovaljni drobilnik WL 600 in hidravlična briketirna stiskalnica C 170. Obe napravi sta izdelani v Nemčiji in sta delovali izjemno zanesljivo. To napravo smo uporabljali le kratek čas, ker načrtovani projekt, pri katerem smo želeli uporabiti odmrlo lesno biomaso iz naravnega gozda, ni uspel. To pa ni imelo nič skupnega s funkcionalnostjo naprave. Napravo bomo poslali nazaj v Nemčijo, ker v Čilu zanjo ni trga. Lhodpfjzgq Trjx Ab Hek Danes bomo dodali še več slik zapakirane naprave, ki bo naslednji teden odposlana.

Stanje: rabljeno, Leto izdelave: 2006, Stiskalni stroj Proizvajalec: Schuler Pressen GmbH & Co. KG, Göppingen, Nemčija Tip: SAL 250-1.9 Mark II Serijska številka: A/260156 (št. stroja 2006-260156) Leto izdelave: 2006 Stiskalna sila: 2.500 kN (250 ton) Število hodov: 80–400 hodov/min Pogon: 51 kW pri 2.000 min⁻¹ Hod batnice: 30 mm Nastavitev batnice: 100 mm Dvig batnice: 75 mm Vgradna višina (od mizne plošče do batnice, spodnji položaj batnice, zgornja nastavitev): 550 mm Dimenzije mizne plošče: 1.950 x 1.060 mm (po skici) Površina batnice: 1.950 x 800 mm (po skici) Stisnjen zrak: 5,5 bar Lodpfx Abozil S Ie Hjhk Skupna masa (brez podajalnika): 48.000 kg Krmilni sistem: SYS PACO 8000 Zvočno izolacijsko ohišje (oranžno) Enota za podajanje traku Proizvajalec: Kohler Maschinenbau GmbH, Friesenheim, Nemčija Tip: KRS 18.260/19-2000.2H-BF1 Serijska številka: 40 871 Leto izdelave: 2006 Priključna moč: 15,5 kW Napajalna napetost: 400 V, 50 Hz Razvijalec Proizvajalec: Kohler Maschinenbau GmbH, Friesenheim, Nemčija Model: 18 260-1000.2 Serijska številka: 40 466 Leto izdelave: 1984 Priključna moč: 8 kW Napajalna napetost: 380 V, 50 Hz

Leto izdelave: 2024, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 1.850 mm, nosilnost: 2.000 kg, Hydraulic winch Technical condition: New Lodpfxsv N Rzxs Ab Hohk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 28 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2380029, skupna višina: 2.600 mm, skupna širina: 1.500 mm, skupna dolžina: 3.410 mm, skupna masa: 4.200 kg, premer rotorja: 330 mm, vrsta vhodnega toka: Klimatska naprava, dolžina rotorja: 800 mm, moč: 30 kW (40,79 KM), Function: The input material is drawn in by two slow-running, counter-rotating shafts (resulting in low dust and noise emissions), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. Should the machine become overloaded or foreign objects enter the cutting mechanism, the control system reverses operation. The precise cutting gap of the cutter discs ensures energy-efficient shredding of the material. The mounted clearing comb prevents wrapping and uplift of the material being shredded. The width of the blades and the number of cutting edges determine the output size of the shredded material. Applications: Lhsdpfxoyw N Aco Ab Hek This robust and heavy-duty machine, designed for maximum durability, enables the cost-effective shredding of not only special waste, metal chips, electronic scrap, and steel drums, but also various containers filled with liquids. All types of industrial waste, steel and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal chips Food, kitchen waste, biogenic waste, wood Glass, plastics, various liquid-filled containers, etc.

Stanje: rabljeno, Machine designation: Dissolver Manufacturer: Schneider Maschinenbau GmbH Model: SHDC15 KWFU Ex Year of manufacture: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Drive motor: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters, 900-liter vessel Product-contacting parts: Stainless steel Features: Hydraulically extendable Dimensions: Machine height approx. 3100 mm (top section extended); length with vessel approx. 2200 mm; width with collet approx. 1800 mm (collet open) Weight (without vessel): approx. 1600 kg Foundation load: approx. 6000 kg/m³ Net weight: 1600 kg Technical documentation: Yes, in PDF Accessories: Stainless steel mixing vessel, dissolver disc (diameter 450 mm), frequency converter Condition: Used Lodpfjrmmk Usx Ab Hshk Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PA12704, 110610702, PA12707, mobilnost: mobilen, Badeer Fish Sorting Machine - complete documentation available in Polish and English. The on-board computer operates on the MES – B’Logic software. It includes two modules: B’Logic Grading and the B’Logic label design program. The set includes: - CAB label printer, - Feed hopper, - Accelerating conveyor, - Weighing machine, - Sorting conveyor, - PC computer The computer located at the machine next to the label printer is a touchscreen unit, while the main computer for setting product specifications (for the product currently being processed) does not need to be placed at the machine. Specifications: - 100–120 fish per minute, - Maximum fish size: Length – 350 mm, Width: 220 mm - User-adjustable operating speed (as shown in the video), - Airborne noise: < 70 dB Machine dimensions: Sorting section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Drive: Worm gear motor Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Lhodey Hiyaepfx Ab Hek Belt width: 45.6 cm Motor: Drum motor Power consumption: 0.37 kW Dynamic scale: Belt width: 250/350 mm Product weight: up to 1 kg (calibration possible) Motor power: 0.18 kW Speed: 0.25 m/s – 2.0 m/s

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: E1053A0497, skupna masa: 850 kg, Na prodaj je TRUMPF TruDisk 4002 (4C) disk laserski sistem / laserski vir, vključno z ločeno hladilno enoto KLH RW 20/0 SK. Tehnični podatki laserja: * Proizvajalec: TRUMPF Laser GmbH + Co. KG * Tip: TruDisk 4002 (4C) * Letnik izdelave: 01/2011 * Laserska moč: 4.000 W * Številka opreme: E1053A0497 * Napetost: 380 V (-10 %) do 460 V (+10 %), 3 AC + PE Lhodpfxjzvqfye Ab Hok * Frekvenca: 50–60 Hz * Priključna moč: 23 kW / 25 kVA * Nazivni tok: 34 A pri 400 V * Stopnja zaščite: IP54 * Teža: pribl. 850 kg Hladilna enota: * Proizvajalec: KLH Kältetechnik GmbH * Tip: RW 20/0 SK * Letnik izdelave: 2017 * Številka dela: E123223000AA * Serijska številka: 17KLH00670 * Napetost: 400/460 V * Frekvenca: 50/60 Hz * Hladilno sredstvo: R134a * Količina hladilnega sredstva: 3,7 kg TruDisk 4002 se prodaja skupaj s prikazano hladilno enoto KLH. Ogled je možen po dogovoru. Dodatne tehnične informacije in slike so na voljo na zahtevo.

Stanje: novo, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, agricultural tractors, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can greatly facilitate many tasks: - Pulling and positioning firewood to the log splitter - Loading logs onto trailers - Extracting root stocks and trees - As an auxiliary winch for forestry cranes and compact excavators - As a winch for small tractors and narrow-gauge tractors Featuring a robust steel construction with three-sided mounting possibilities (left, right, rear) and 12 threaded holes, offering versatile mounting options for the winch (threads are pre-cut and painted. They should be retapped prior to use for corrosion protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We fit hydraulic motors ranging from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow rate Colour: red Lhsdpfxjdf Ufdo Ab Hsk Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version comes with an electric hydraulic valve and hoses for the motor. Article number: HAW1700-EV NOTE: Images 2, 3, and 4 are mounting examples!

Stanje: novo, Hydraulic Winch for Log Splitters, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture and many other applications. This hydraulic attachment winch can make a wide range of tasks easier for you. - Pulling and positioning firewood for the log splitter - Pulling logs onto trailers - Extracting rootstocks and trees - Use as an auxiliary winch for forwarding cranes and small excavators - Winch for small tractors and narrow-track tractors Rugged steel construction with triple-sided mounting ability (left, right, rear) using 12 threaded holes, providing numerous installation options (threads are pre-cut and painted. They require re-tapping with a tap before use to remove the corrosion protection coating). Supplied with a 20 m long, 6 mm thick steel cable. Large drum for extended cable service life. We fit hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on your speed and pulling force requirements. Max. working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Max. pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pivot mount: 570 mm Width front: 120 mm Width rear: 180 mm Lededf Ud Sopfx Ab Hshk Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Winch available for bolting or welding installation. This version is equipped with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Images 2, 3 and 4 are example installation illustrations!

Leto izdelave: 1995, stanje: dober (rabljeno), Zanesljiva naprava za zapiranje pladnjev podjetja Dyno Industrier, izdelana na Norveškem. Primerna za meso, ribe, perutnino, pripravljene obroke, sir in druge živilske izdelke, ki zahtevajo vakuumsko pakiranje ali pakiranje v modificirani atmosferi (MAP). Tehnične specifikacije: Model: DYNO 320VG / 321VG Možnost vakuumskega pakiranja + MAP (plinjenje) Popolnoma delujoča in trenutno v proizvodnji Polavtomatsko delovanje Nameščen kalup za 4 pladnje Priložen sistem za navijanje folije Priložen originalni priročnik za uporabo Krmilna plošča Pilz Dobro vzdrževana in pripravljena za takojšnjo uporabo Idealna za: Proizvajalce mesnih izdelkov Podjetja, ki predelujejo morske sadeže Proizvajalce delikates Proizvajalce pripravljenih obrokov Mala in srednje velika podjetja za proizvodnjo živil Lhedpfx Aozkwd Sjb Hjk Stroj si lahko ogledate v delovanju in ga demonstriramo resnim kupcem. Na voljo je več kalupov.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10044/0218, !!! Podrobne fotografije in specifikacije stroja TLI 10 najdete v datoteki PDF, ki je priložena. !!! !!! TLI 10 je namenjen obdelavi notranjih in stranskih površin prstanov. !!! Za obdelavo zunanjih površin je potrebno kupiti stojalo TL0 10, ki ga ne ponujamo. Lhodpfx Abey S Sz Rj Hek Stroji so posebej zasnovani za obdelavo zaročnih prstanov in zapestnic. Ločitev obdelave notranjih (TLI 10) in zunanjih površin (TL0 10) na dva stroja zagotavlja visoko produktivnost. Vse potrebne strojne operacije (ravna obdelava, obdelava robov, stranska obdelava in faziranje) je mogoče izvajati zaporedno, brez potrebe po prilagoditvah ali predelavah strojev. Tehnični parametri: TLI 10 Parameter Vrednost Pogonska moč 0,55 kW z električno zavoro Napetost 380 V / 50 Hz Regulacija hitrosti potenciometer Območje hitrosti 0–1400 vrt/min Dimenzije 100 × 70 × 130 cm Masa 170–190 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and has a tool magazine. CRT display, classic keyboard with physical buttons 3. Electrical Specifications (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not readable, but standard Fanuc is 110/220 V → transformer) Lsdew Uab Aepfx Ab Hohk Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine Construction Vertical CNC machining centre (milling machine) with a closed enclosure. Worktable with a hole grid for fixing components. Carousel tool magazine (visible in the photo) – typically 12, 20, or 24 tools (depending on the version). Automatic Tool Changer (ATC). Z axis operates vertically (visible guideway assembly and bellows type way covers). 5. Typical Technical Data (for Chiron FZ 12/15 machines from this period) (values may vary depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500–700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load capacity: 200–300 kg Spindle speed: 20–6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5–15 kW (depending on version) Tool magazine: 12–24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Applications Metal machining (steel, aluminium, cast iron, light alloys). 📌 General Data: • Manufacturer: CHIRON, Germany • Type: CNC machining centre • Control: visible in photo (Fanuc Series 0-M) • Automatic tool changer • Robust worktable with clamping options • Stable, industrial design 📌 Condition: • Used machine, in good condition • Regularly serviced • Normal signs of use visible • Fully functional 📌 Applications: • Precision milling • Machining metal components • Single-part and series production

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Analytik Jena GmbH+Co. KG visokoločljiv spektrometer z neprekinjenim virom za atomsko absorpcijsko spektroskopijo s PC, AAS ContrAA 700 Model: AASContrAA700 Stanje: Rabljeno Tehnični podatki: 230V AC 50/60Hz 2100VA Splošno: Optični sistem Refleksijska optika z zaščitnim nanosom in optični sistem z neprosojno kapsulacijo Echelle - rešetkasti dvomonokromator z goriščno razdaljo F=380 mm in nastavljivo vmesno režo; predmonokromator s kremenovim prizmom. Izbira valovne dolžine prek zrcalno vstavljenega neonskega dodatnega oddajnika. Območje valovnih dolžin: 185-900 nm Spektralna pasovna širina: 2 pm pri 200 nm Lodpfx Abjzh Iqwj Hohk Dodatna oprema: Dokumentacija/priročnik PC (Windows 7), monitor, miška, tipkovnica, povezovalni kabli 5x IC standardna cev 407-A81.011 3x grafitni pipetni vložki 407-A81.020 Set varovalk contrAA Mast za tesnilne obročke 2x nastavek 702-A81.233 1x nastavek 702-A81.234 1x zbirna posoda 407-110.499 4x transportni ročaji

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 0-240-14-3077, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), vhodna napetost: 400 V, vhodni tok: 52 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, največja višina reza: 125 mm, največja širina rezanja: 4.300 mm, premer žaginega lista: 450 mm, vrsta nastavitve višine: električni, izvrtina žagine plošče: 60 mm, vrsta aktuacije: električni, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 3.800 obr/min, skupna dolžina: 10.216 mm, skupna širina: 7.470 mm, skupna višina: 2.200 mm, skupna masa: 15.000 kg, višina mize: 1.020 mm, Oprema: CE označba, dozator, zaščitni pokrov žaginega lista, Naprodaj je profesionalna, industrijska razrezovalna žaga za plošče priznane blagovne znamke HOLZMA iz visokozmogljive serije 510. Naprava je izdelana v Nemčiji ("Made in Germany") in je posebej zasnovana za breziztržajno in natančno razrezovanje velikih količin plošč v industrijski večizmenski proizvodnji. Kot izvedba HPL ima ta sistem popolnoma avtomatsko dovajanje materiala z zadnje strani preko robustne dvižne mize, kar omogoča minimalne ciklusne čase in maksimalno ergonomijo za upravljavca. Tehnični podatki po specifikaciji (HPL 510/43/22/L/D/X) Proizvajalec: HOLZMA Maschinenbau GmbH Natančna oznaka modela: HPL 510 / 43 / 22 / L / D / X Lsdpfxszilz No Ab Hshk Dolžina reza (koda 43): maks. 4.300 mm Širina dvižne mize (koda 22): maks. 2.200 mm Izteg lista žage: 125 mm Premer glavnega lista žage: maks. 450 mm Delovna višina (višina mize): ca. 1.020 mm (nastavljivo prek nivelirnih nog) Skupna višina: ca. 2.100 – 2.200 mm (odvisno od zasnove terminala) Krmiljenje in oprema prijemalnih klešč Krmiljenje stroja: Opremljeno z zanesljivim, IPC-podprtim visokozmogljivim krmiljenjem HOLZMA CADmatic 4. Sistem omogoča intuitivno vodenje operaterja prek grafičnih zaslonov, prikaz napak v jasnem besedilu in optimizirano vizualizacijo poteka rezanja. Materialne klešče: Programno vodeni pomičnik je serijsko opremljen z 9 robustnimi, dvoprstimi HOLZMA vpenjalnimi kleščami za nežno in visoko natančno fiksiranje paketov plošč. Električne priključne vrednosti in energija Obratovalna napetost: 400 V (trofazni izmenični tok) Tip omrežja: 3~ + N Frekvenca: 50 Hz Nazivni tok: 52 A Potrebna zaščita: 63 A počasna Krmilna napetost: 24 V Oprema in funkcije Avtomatsko uravnavanje višine reza: Nosilec žage samodejno prilagaja izteg glavnega motorja žage (13,5 kW) in predrezalnega agregata (2,2 kW) glede na izmerjeno višino paketa. Pametni pritisni nosilec (pnevmatski): Nastavljiva odprtina za bistveno zmanjšanje mrtvih časov med rezi. Pogonska težka dvižna miza ("L"): Masiven 4-stebrični podajalni sistem zadaj, zasnovan za nemoteno rokovanje s težkimi skladi plošč. Opremski paketi ("D" & "X"): Razširjena oprema stroja za optimiziran pretok materiala, natančen prijem paketov in visoko zmogljive rezalne cikluse. Pomembna logistična in prodajna obvestila Stanje in pakiranje: Stroj je strokovno demontiran in popolnoma pripravljen za nakladanje (pakirano). Vsi občutljivi deli osi, linearna vodila in krmilne komponente so v skladu z zahtevami proizvajalca strokovno zavarovani za transport. Stroški: Stroški nakladanja in prevoza niso vključeni v ceno in jih v celoti krije kupec. Priporočila za lokalne žerjave in transportne storitve so na voljo pri nas. Po potrebi pomagamo pri prevzemu stroja v okviru naših zmožnosti.