Hydr. kabelski vitel el. ventilski ročaj. Radio

Holzhäuer HAW1700-EHV-Funk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Kwodjdf Ufpopfx Abbst Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Article number: HAW1700-EV-RC

Stanje: rabljeno, Roller diameter / mm Throat depth / mm Kodpouddmrsfx Abbjwt Workpiece height / mm Table dimensions: 615x615 mm

Stanje: novo, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard machinery, horticulture, and many other applications. With the hydraulic add-on winch, you can simplify a wide range of tasks. - Pull and position firewood to the log splitter - Pull logs onto trailers - Extract rootstocks and trees - Usable as an auxiliary winch on forwarding cranes and compact excavators - Winch for small tractors and narrow-track tractors Features a robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, providing flexible installation (threads are cut and painted; for corrosion protection, recutting with a tap is recommended before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum ensures longevity of the steel cable. We fit hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous duty: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Kedpfxsdf Ua Rj Abbswt Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Article number: HAW1700 NOTE: Image 1 shows unit with manual valve; images 2, 3, and 4 are installation examples!

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking tasks. The integrated fiber laser allows you to mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (three-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction system (with activated carbon filter) • Pilot laser (simple preview and contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V Kwedpfsu Smd Eex Abbst • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2024, Motor 7.5 kW, 50 Hz, 380 V, 3-phase Splitting force: 20 tonnes Automatic saw: yes Maximum log diameter: 48 cm Maximum log length: 61 cm Feed length: 1.8 m Chainsaw / splitter drive: hydraulic, max. 4800 rpm Saw and feed control: hydraulic Conveyor belt with winch: 3.2 m length / 250 mm width Conveyor belt tilt angle: ±15° (manually adjustable) Conveyor belt speed: 0.8 m/s Chainsaw: 22" Cylinder diameter: 4" Conveyor belt length: 3.2 m Cycle time: 6 seconds 12" trailer wheel 6-way splitting wedge Hydraulic oil capacity: 32 L Weight: 737 kg Kedsv Dvfrjpfx Abbswt The machine is mounted on a chassis with ball hitch. The log saw-splitter is equipped with a 3.2 m long conveyor belt, which can transport the processed wood directly to a trailer. The maximum height of wood loading by conveyor belt is 2 m. The machine's capacity is approx. 5 – 8 cubic metres of wood per hour, depending on wood type. Various optional accessories are available for the machine, such as a hydraulic log feed and additional wedges.

Stanje: novo, Hydraulic Winch for Log Splitters, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture and many other applications. This hydraulic attachment winch can make a wide range of tasks easier for you. - Pulling and positioning firewood for the log splitter - Pulling logs onto trailers - Extracting rootstocks and trees - Use as an auxiliary winch for forwarding cranes and small excavators - Winch for small tractors and narrow-track tractors Rugged steel construction with triple-sided mounting ability (left, right, rear) using 12 threaded holes, providing numerous installation options (threads are pre-cut and painted. They require re-tapping with a tap before use to remove the corrosion protection coating). Supplied with a 20 m long, 6 mm thick steel cable. Large drum for extended cable service life. We fit hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on your speed and pulling force requirements. Max. working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Max. pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pivot mount: 570 mm Width front: 120 mm Width rear: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Winch available for bolting or welding installation. This version is equipped with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV Kwsdpfxjdf Ud Se Abbjt NOTE: Images 2, 3 and 4 are example installation illustrations!

Stanje: novo, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 Kwsdpfxjpk Iv Uo Abbst The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 to 890 mm Underside reinforced with ribbing. Including floor bearing Optional accessories available! Surface flatness: 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Stanje: novo, Leto izdelave: 2026, Yanigav Kreissäge SC600E / SC600M • Drive: Electric single-phase motor 3.1 kW / combustion engine • Saw blade diameter: 60 cm / 60 cm Ksdpfx Abjr D Nkpobowt • Saw blade bore: 30 mm • Tooth depth: 28 cm / 28 cm • Rotation speed: 1,450 rpm • Weight: 90 kg / 100 kg Price: €1,395 / €1,615

Stanje: novo, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, agricultural tractors, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can greatly facilitate many tasks: - Pulling and positioning firewood to the log splitter - Loading logs onto trailers - Extracting root stocks and trees - As an auxiliary winch for forestry cranes and compact excavators - As a winch for small tractors and narrow-gauge tractors Featuring a robust steel construction with three-sided mounting possibilities (left, right, rear) and 12 threaded holes, offering versatile mounting options for the winch (threads are pre-cut and painted. They should be retapped prior to use for corrosion protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We fit hydraulic motors ranging from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow rate Colour: red Dimensions: Kwsdpfxsdf Ufde Abbst Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version comes with an electric hydraulic valve and hoses for the motor. Article number: HAW1700-EV NOTE: Images 2, 3, and 4 are mounting examples!

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Laser for Product Marking – The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide variety of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is essential in many industries. The powerful laser software enables you to create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. Additionally, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transferring them into predefined fields. A handheld scanner can also be used. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options—such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc.—are available upon request. Made in Germany Fiber laser: 30W, 20W or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150 x 150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: exhaust system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Pilot laser (simple preview, contour preview) Kwedpfx Abounh H Sebet • Focus finder (user-friendly focus adjustment) • Status signal light • Max. workpiece height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard mount • Aluminum profile frame • Air-cooled • Door width: approx. 700 mm / pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg