Hidravlična Vrtalna Naprava nakup rabljenega (8.912)

Stanje: pripravljen za uporabo (rabljen), Engine: CAT 3054 DI-T (EPA compliant), Power/Speed: 78.5 kW (107 hp) at 2,300 rpm, Max. Power: 80.5 kW (110 hp), Diesel Tank Capacity: 160 l. Hydraulic system: Hydraulic pumps: 1st circuit: 92 l/min, 2nd circuit: 73.6 l/min, 3rd circuit: 18.4 l/min, 4th circuit: 8 l/min, System pressure: 250 bar, Hydraulic tank capacity: 350 l. Undercarriage: Type: B1, Tractive force: 75 kN, Travel speed: 2.2 km/h, Ground pressure: 5.3 N/cm², Overall width: 2,200 mm, Track length: 1,900 mm, Ground clearance: 390 mm, Oscillation: +18°/-8°. Drilling equipment: Permissible torque: 20 kNm, Total length: 5,765 mm, Feed stroke: 4,300 mm, Max. rod length: 4,000 mm, Feed force: 40 kN, Pullback force: 60 kN, Feed rate: 9 m/min, Pullback rate: 9 m/min, Fast feed: 47 m/min, Fast pullback: 47 m/min. Transport dimensions (L/W/H): 6,470 mm / 2,200 mm / 2,560 mm, Weight: 8,500 kg. Documentation available. Djdpjtpp Ifefx Aplekl

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), With articulated carrier DC26, power output: 108 kW, maximum travel speed: 16 km/h, tire size: 14.00 R24 A, 2 x drill booms BUT 35, Deutz BF4M 1013C diesel generator set, BMH 6414 drill carriages, maximum drill rod length: 4,321 mm, maximum drilling depth: 4,020 mm, HL 210 loading platform, CE compliant, air/water flushing, heat exchanger and Swellex high-pressure pump, supplied without drifters (drill hammers). Djdpfxsl Tn Eps Aplskl

Stanje: rabljeno, številka stroja/vozila: 006157, Max. panel width: 1000 mm Dedpfxey Nkyae Aplskl Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Positioning via NC control: yes Lateral horizontal groups: yes

Stanje: rabljeno, številka stroja/vozila: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm Number of units: 1 Positioning via NC control: yes Dksdpoy Nkmmefx Aplol Lateral horizontal groups: yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Prehodna vrtalna masina Vitap Sigma 2TAS Dsdpfsy Idd Njx Aplokl 4 navpične vrtalne skupine, vsaka z dvema glavama 2 stranska čelna vretena Razdalja vreten: 32mm Maksimalna dolžina obdelovanca: 2500mm, minimalna: 240mm Globina vrtanja do 70mm Pnevmatsko vpenjanje materiala Leto proizvodnje: 2006 CE znak Teža stroja: 1600kg Dimenzije: 390x180x145cm (V)

Stanje: rabljeno, Namizni vrtalni stroj, namizni vrtalni stroj GILLARDON tip GT 16 Tovarna št.: Leto izdelave cca 1985 Vrtalna zmogljivost: 16 mm Dkjdpfx Apoy N Duwolel Vpenjanje vretena: MK 2 Število vrtljajev vretena: 300 do 3000 U/min Iztek: 250 mm Hod pinale: 140 mm Velikost mize: 400 x 400 mm Višina mize: 850 mm Razdalja vreteno–mizna plošča: največ 680 mm Premer stebra: 105 mm Moč motorja: 0,75 kW Omrežni priključek: 380 V, 50 Hz - Število vrtljajev vretena nastavljivo preko variatorja in dveh stopenj klinastega jermena - Nastavitev višine vrtalne glave z ročico cca 430 mm - Osvetljevalna naprava - Podometni omarica z vrati - Hitrovpenjalna vpenjalna glava 1 do 16 mm Potrebni prostor D x Š x V: 900 x 550 x 1650/2080 mm Teža: 250 kg Zelo dobro ohranjeno stanje

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 9.462 h, Horizontalna vrtalno-izpiralna naprava, Tracto Technik, Grundodrill 18 ACS * Grundodrill * Tip 18 ACS * Letnik 2013 * 9462 ur, prebranih po števcu * Pogon prek 4-valjnega dizelskega motorja Cummins z močjo 123 kW / 167 KM * 2 pogonski stopnji * Enokabina z 1 sedežem * Transportne mere (D x Š x V): 6450 x 2350 x 2650 mm * Teža: 15.110 kg * Gosenice z gumijastimi verigami 34–37 mm * Podvozje (D x Š): 2650 x 460 mm * Magazin za drogove (50 vrtalnih drogov v magazinu, premer 60 mm) * 1 x vrtalna glava – glejte slike * Daljinsko upravljanje, klimatska naprava, locirni sistem Ta opis ni zavezujoča ponudba in lahko vsebuje napake. Za informacije ni zagotovila. Djdjyq Aqlepfx Aplskl Obiščite tudi našo spletno stran.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 70218, Equipment / further information: Various tools Other MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST. Dedpfx Apspithajljkl

Stanje: rabljeno, prevoženi kilometri: 1 km, moč: 242 kW (329,03 KM), konfiguracija osi: 4x4, vrsta prenosa: samodejen, Leto izdelave: 2012, Gross vehicle weight (GVW): 24,000 kg For further information, please contact Emal Jaweed. Atlas Copco SmartRoc C50-10SF, Year of construction: 2012, Operating hours: 14,261, Power (kW / hp): 242 / 329, Weight: 30,000 kg, Borehole diameter: 90–140 mm, Maximum drilling depth: 36 m, Air volume (FAD) at 12 bar: 223 l/s (approx. 472 cfm), Drilling method: COPROD technology combines top hammer drilling, Drill meter-controlled automation system, GPS/Hole Navigation System (HNS) for guided drilling, Dust collector, Automatic rod changer, Good condition, Air conditioning, Auxiliary heater, Central lubrication, Radio, Video available Miscellaneous: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing options available. * We are specialists in worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * For vehicle and used machinery sales, only the general terms and conditions (GTC) of Jaweed GmbH apply. * Further information and our full terms and conditions are available on our website. Dksdpoy Ivypsfx Apljl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, ODLIČNO STANJE Dodpfx Aey D S I Ieplekl

Stanje: rabljeno, prevoženi kilometri: 1 km, moč: 187 kW (254,25 KM), konfiguracija osi: 4x4, vrsta prenosa: samodejen, Leto izdelave: 2013, Gross vehicle weight: 44,400 kg Contact Emal Jaweed for further information. Drilling rig, ABI / Delmag, type: RH 12, year of manufacture: 2013, operating hours: 12,035, kW / HP: 187 / 254, transport length: 11,030 mm, transport width: 2,550 mm, operating weight: 43,200 - 44,400 kg, transport weight: 29,850 - 42,400 kg, work pressure: 33 MPa, tensile force: 160 kN, track width: 2,250 - 3,700 mm, radio, automatic climate control, seat heating, central lubrication system, Kelly rod: EMDE K298/3-12SD, year of manufacture: 2020. Other information: * We are offering over 200 machines for sale. * Our location is 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for printing & typing errors. * Subject to errors and prior sale. * Trade-in possible! * For vehicle/machinery purchases, only the terms and conditions (AGB) of Jaweed GmbH apply. Dkedpfx Asy Iadrjplol * Further information and our general terms and conditions can be found on our website. All goods are sold based on our terms and conditions (see: ... / AGB).

Stanje: dober (rabljeno), Leto izdelave: 2018, Burning-Drilling Machine Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic tool turret Tool holders: 14 Dodpfx Asvzrczsplskl Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring/marking: 5 to 40 mm Sheet dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitation) Minimum finished part dimensions: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero position transverse conveyor Number of carriages: 2 clamps NC feed carriage, side positioned 4 clamping jaws (2+2) 3 short stroke transverse conveyors Working height: 1,000 mm Outfeed side: Discharge roller conveyor with lowerable unloading table and chute Material collection container for unloading small parts. Filter unit incl. piping High performance for use with carbide tools. Suitable for drilling, thread cutting, marking, milling, plasma cutting of flat steel and plates. Software options for milling and marking LANTEK license ä5526 Availability: Immediately!

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, KALTENBACH Sawing and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine type: Automatic sawing and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling unit: KALTENBACH APS 1003 Year of manufacture: 1999 Condition: Used, operational Location: Germany Availability: Dismantling from mid/end of March 2026 Inspection: The machine is in operation and can be viewed under power Sale: Without warranty or guarantee Machine Description: For sale is a complete Kaltenbach sawing and drilling line for processing heavy steel profiles. The system consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The plant is currently in operation and has been reliably used in steel construction up to its last use. It is ideally suited for efficient processing of beams and profiles in both serial and project production. Typical Applications: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Serial and single-part production Technical Data: Dkjdpfxeyak Ans Aplsl Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre: swivel on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing operation Drilling unit APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drilling portal - Suitable for web and flange processing Roller Conveyor & Transport Systems: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age- and usage-related signs of wear - Sale as is - No warranty or guarantee Scope of Supply: - Bandsaw KBS 851 DGNC - Drilling unit APS 1003 - Infeed and outfeed roller conveyors - Infeed and outfeed cross transfer conveyors - Control cabinet / operating unit - Existing protective and safety devices - Documentation as available Dismantling & Loading: - Dismantling by the buyer - Dismantling possible from end of March 2026 - On-site available: * Forklift truck * 2 overhead gantry cranes, each with 5 t lifting capacity - Good access and loading conditions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000007687, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 60 mm, skupna širina: 4.400 mm, skupna dolžina: 7.290 mm, moč: 20 kW (27,19 KM), največja hitrost vrtenja: 18.000 obr/min, Popolnoma delujoč. Še vedno v uporabi. Dkodpfex I A A Rex Aplel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: 290/02, Funkcionalnost: popolnoma funkcionalen, Ulrich Schöwerling Delta Z50 de luxe – Hidravlična balirka / stiskalnica Delta Z50 de luxe, proizvajalca Ulrich Schöwerling Maschinenbau, je robustna vertikalna hidravlična balirka in stiskalnica, zasnovana za učinkovito stiskanje različnih industrijskih in odpadnih materialov. Zaradi masivne konstrukcije, zmogljive hidravlike in enostavnega upravljanja je naprava idealna za skladišča, proizvodne obrate ter reciklažne centre. Stroj deluje preko hidravlične enote z elektromotornim pogonom. Stiskalna plošča se premika navpično od zgoraj navzdol, kar zagotavlja učinkovito stiskanje. Konstrukcija omogoča tudi vezavo bal, kar olajša rokovanje in transport končnih bal. ⚙️ TEHNIČNI PODATKI • Proizvajalec: Ulrich Schöwerling Maschinenbau (Nemčija) • Model: Delta Z50 de luxe • Št. stroja: 290/02 • Tip stroja: Vertikalna hidravlična balirka / stiskalnica Dksdpsyghhhjfx Aplsl • Priključna napetost: 400 V • Frekvenca: 50 Hz • Poraba toka: 16 A • Moč motorja: 8 kW • Teža stroja: pribl. 850 kg • Certifikat: CE skladnost Tipične uporabe: papir, karton, plastična folija, tekstil in drugi stisljivi industrijski materiali

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 95 m/min, višina plošče: 60 mm, dolžina plošče: 900 mm, širina plošče: 3.000 mm, proizvodna zmogljivost: 1.500 enota/h, TEHNIČNE PODROBNOSTI Minimalna širina plošče: 250 mm Maksimalna širina plošče: 3.000 mm Minimalna dolžina plošče: 100 mm Maksimalna dolžina plošče: 900 mm Minimalna debelina plošče: 12 mm Maksimalna debelina plošče: 60 mm Največja teža na ploščo: 50 kg Delovna višina: 1.060 mm Hitrost transporterja plošč z inverterjem: 20 - 95 m/min Hitrost pri ploščah nad 50 kg: 50 m/min PODROBNOSTI STROJA Model krmiljenja: TPA - Albatros - CNC 2000 OPREMA EASYTOOL programska oprema 5 razdeljenih spodnjih vertikalnih vrtalnih glav, avtomatsko prilagodljive z NC krmiljenjem, vsaka s 26 neodvisnimi vreteni 2 horizontalni vrtalni glavi z razdeljenimi glavami, 28 + 28 vretenc (na vsaki strani), neodvisno razporejene na dveh nivojih Dkedpfxoyzn Sds Aplsl Zunanja referenca: MMA004.003

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 50 kg, hitrost pomika os X: 95 m/min, višina plošče: 60 mm, dolžina plošče: 900 mm, širina plošče: 3.000 mm, DÉTAILS TECHNIQUES Largeur de panneau min. : 250 mm Largeur de panneau max. : 3 000 mm Longueur de panneau min. : 100 mm Longueur de panneau max. : 900 mm Épaisseur de panneau min. : 12 mm Épaisseur de panneau max. : 60 mm Poids maximal par panneau : 50 kg Hauteur de travail : 1 060 mm Vitesse du convoyeur à panneaux avec variateur : 20 - 95 m/min Vitesse pour panneaux de plus de 50 kg : 50 m/min Dedjyzn D Tepfx Aplskl DÉTAILS DE LA MACHINE Modèle de commande : TPA - Albatros - CNC 2000 ÉQUIPEMENT Logiciel EASYTOOL 5 têtes de perçage verticales inférieures divisées, automatiquement flexibles avec commande numérique, chacune avec 26 broches indépendantes 3 têtes de perçage verticales supérieures divisées, automatiquement flexibles avec commande numérique, chacune avec 26 broches indépendantes 2 têtes de perçage horizontales à têtes divisées, 28 + 28 broches (par côté), disposées indépendamment sur deux niveaux Référence externe : MMA004

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Podroben opis sledi Dedpfx Apoy D N Rgoljkl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 9.413 h, številka stroja/vozila: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders Dodpfov Nhyfox Aplokl - Machine weight: 17.5 t - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Stanje: zelo dobro (rabljeno), Nudim profesionalno hidravlično reševalno napravo priznane znamke LUKAS, model LSP 44 B. Oprema, uporabljena pri reševanju (npr. gasilci), se odlikuje po zelo visoki kakovosti izdelave in zanesljivosti. Tehnično stanje: Naprava je delujoča, preizkušena in pripravljena za delo. Ima običajne znake uporabe, vidne na fotografijah. Dkodjyxrbdepfx Aplsl Tehnični podatki: Proizvajalec LUKAS / FAG Kugelfischer Model LSP 44 B Tip DSH-20-2 Napajanje 230 / 240 V Motor Leroy Somer približno 1,1 kW Država izvora Nemčija V kompletu: Hidravlični agregat Hidravlične cevi Boben za cevi Delovni element kot na fotografijah Uporaba: Tehnično reševanje Gasilske enote Reševalne službe Hidravlična dela

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Norton Bohranlage ROBO 350 ELECTRIC — Letnik izdelave: 2022 Rabljeno, iz profesionalnega najemnega parka Kurt König Baumaschinen GmbH, Einbeck. Stanje & Informacije: - Stanje: Rabljeno iz najema, redno vzdrževano - Funkcija: Popolnoma delujoče - Fotografije izdelka sledijo — ob interesu nas kontaktirajte za aktualne slike - Ogled možen v 37574 Einbeck po dogovoru Dedpfxsy A E Tne Aplskl Cena: 2.200 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Cedima Bohranlage P-3000 — Letnik 2024 Rabljeno iz profesionalnega najemnega parka Kurt König Baumaschinen GmbH, Einbeck. Stanje & informacije: - Stanje: Rabljeno iz najema, redno vzdrževano - Funkcionalnost: Popolnoma delujoče - Fotografije izdelka sledijo — za aktualne fotografije nas kontaktirajte - Ogled možen na lokaciji 37574 Einbeck po dogovoru Dkjdpfx Apjy A E Npolel Cena: 3.450 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalna teža: 7.000 kg, Leto izdelave: 2008, številka stroja/vozila: CRG- 442812008-l, v odličnem stanju Dkjdpfx Apsylml Njlsl

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, nosilec vretena: MK 4, globina vrtanja: 240 mm, skupna širina: 480 mm, skupna dolžina: 550 mm, zmogljivost vrtanja: 45 mm, največja hitrost vretena: 1.270 obr/min, hitrost vretena (min.): 68 obr/min, pomik vretena: 240 mm, SPECIFIKACIJE Znamka: Erlo Dedpfx Aex Dcfhsplekl Tip: TCA-45 Kapaciteta: 45 mm ø Dolžina mize: 550 mm Širina mize: 480 mm Vpenjanje vretena: MK4 Število obratov: 68 - 1.270 RPM Izvit: 360 mm Hod: 240 mm Miza ročno nastavljiva po višini Avtomatsko podajanje Menjava prestav z zobniki Dimenzije stroja: 1.000 x 700 x 2.400 mm

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Ground Improvement Device | Drilling Rig | 5,834 operating hours Dkodpsx Uyzqofx Aplol 📍Location: Germany 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220,000 or Make an Offer. Payment on delivery available for a small additional fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 minor issues ℹ️ 0 remarks ⚠️ 📌 Inspector’s note: Machine for concrete pile drilling, soil improvement, and dynamic compaction (vibro compaction). Carrier unit: Sennebogen SR25BT (year 2008) with Delmag RH18 leader attachment (year 2009). Leader traverse (stroke): 12.50m, total height: 19.91m. Working radius: 3.165 - 4.00m. Equipped with a crowd winch, freewheeling feed winch, auxiliary winch, rear platform. Rotary table SHT25. PLEASE NOTE: KDK rotary drilling head BT180-2 NOT INCLUDED, THIS IS SOLELY A GROUND IMPROVEMENT UNIT. Drill gearbox: MBDA 3500 ABI. Includes single-flight auger. NO Kelly bar included. Mast support cylinder, auto-alignment system. Hydraulic telescopic undercarriage, adjustable width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drilling accessories are available separately. Also available: a mobile mixing plant by MAT, comprising a mixing tank (throughput 20m³/h), screw conveyor, agitated storage tank (capacity 4,000l), and plunger pump with remote control. The overall condition of the machine is in line with the indicated service hours. At the time of inspection in 2023, the machine operated without any anomalies. As of October 2024, signs of storage-related damage were found on valves, control system, and hydraulic hoses. Simultaneous use of both attachments is not possible. The machine displays wear on pins and bushings, as well as general signs of use (dents, abrasions, etc.) consistent with age, mileage, and application. The machine was not load-tested. Machine was used with 55 and 80 paddles. After service and maintenance work for storage-related damages, the unit will be ready for operation. 📄 Want access to the full inspection, extra photos, or a video? Tip: The keyword "33244 Equippo" is commonly used to find more details online. 💡 Why choose this machine and our service? ✔ Thorough professional inspection ✔ Delivery directly to your jobsite ✔ Money-back guarantee ✔ Secure, flexible payment options 🔄 Considering other equipment? We offer helpful tools and resources for equipment owners and operators – all conveniently available on our platform.