Hans Schoen Enostebrična Hidravlična Stiskalnica nakup rabljenega (6.150)

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Nwjdpfx Aeyupuljh Ueg Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Leto izdelave: 1977, stanje: pripravljen za uporabo (rabljen), Na voljo je hidravlična univerzalna stiskalnica. Tlačna sila: 75t, hod: 250mm, površina mize X/Y: pribl. 600mm/500mm, varnostna razdalja: 107mm, zavorna pot: 18mm. Oprema: ročno nastavljiva omejitev hoda (zgoraj/spodaj), integriran izmetalec z upravljanjem vlečne blazine, analogni prikaz tlaka do 400 barov. Varnostna oprema: SICK varnostna svetlobna zavesa za delovno območje. Skupna teža: pribl. 3500kg, skupne mere X/Y/Z: pribl. 1300mm/1800mm/2900mm. Ogled možen po dogovoru. Njdpfx Asy S A Nfoh Uewg

Stanje: dober (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 055-013-15, Ponudba 25274 Tehnični podatki: Nwsdpfxsy Ewx Us Ah Uog - Maks. stiskalna sila: 25 t - Maks. hod bata: 500 mm - Hitrost hoda: 200 mm/s - Povratni hod: 450 mm/s - Vgradna višina: 800 mm - Previs do sredine bata: 380 mm - Površina za vpenjanje bata: 440 x 360 mm - Vpenjalni zatič bata: 40 mm - Velikost mize: 630 x 500 mm - Vrtina mize / preboj: 180 mm - Vlečna blazina: 10 t - Elekt. nožno stikalo - 2-ročna upravljalna konzola - Pogon: 400 V / 12,5 kW - Potrebni prostor pribl.: Š 800 x V 2750 x G 1150 mm - Teža pribl.: 2400 kg

Stanje: rabljeno, Single-column hydraulic press SCHÖN Type FES / C 7 Machine No. 4281 Year of manufacture 1995 Pressing force: 7 tons Throat depth: 170 mm Throat depth at rotary indexing station: 60 mm Table size: 310 x 200 mm Rotary indexing table: Ø 400 mm, with 12 indexing stations Ram area: approx. Ø 100 mm Ram plate: 315 x 200 x 35 mm Ram stroke: 100 mm Installation height (rotary table to ram plate): max. 130 mm Table height above floor: 890 mm Njdpfx Aer I E Itoh Ujwg Ram rapid traverse speed downward: approx. 300 mm/sec. Ram rapid traverse speed upward: approx. 300 mm/sec. Ram working speed: approx. 30 mm/sec. Motor power: 1.5 kW Power supply: 380 Volt, 50 Hz Tank capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 stations - Mechanically adjustable fixed stop - Adjustable dwell time at BDC - Electric two-hand operation Space requirement (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition

Leto izdelave: 1991, stanje: pripravljen za uporabo (rabljen), Pritisk: 250kN, delovni tlak: 280bar, hod: 300mm, vgradna višina: 500mm, izrast: 250mm, količina olja: 280l, hitrost bata: 105mm/s, teža: cca 2550kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nwsdpfxeynlubs Ah Ujg

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table area: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Pin hole in ram: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Nedpfx Ahsu Nfmys Uewg Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-speed hydraulic press Robust welded frame construction. Mode selection via selector switch: inching, two-hand, foot or continuous operation with feed Press is equipped with a side-mounted piece counter EMERGENCY STOP switch With stroke limiter Press force adjustment possible With overload protection (pressure relief valve) With shock-absorbing system Light curtain SICK optical electronics prepared (can be reactivated as an option)

Leto izdelave: 1977, stanje: pripravljen za uporabo (rabljen), Na voljo je enostebrična stiskalnica. Tlačna sila: 30.000 kg, površina mize X/Y: pribl. 600mm/450mm, višina zaščitnega polja: 300mm, varnostna razdalja: 110mm, zaostala pot: 18mm. Varnostni sistem s svetlobnimi zavesami SICK, ročna nastavitev z ročnim kolesom, analogni prikaz tlaka, zunanji krmilni omarica, priprava za nožno stikalo. Teža: pribl. 3.200 kg, skupne mere X/Y/Z: 1400mm/1800mm/2400mm. Ogled možen po dogovoru. Njdsy Tatqepfx Ah Ujwg

Stanje: dober (rabljeno), Leto izdelave: 1982, Pritisna sila: maks. 200 kN Varnostna razdalja: 100 mm Dodatni pomik: maks. 10 mm Moč motorja: 3 kW vključno z dodatno opremo Na zahtevo lahko organiziramo transport in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Odkup in prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARSKIH STROJEV IN OSTALO. Potrebujete kakovosten, a ugoden stroj za svojo proizvodnjo? Ali pa ga želite prodati? Za dodatne informacije ali kontaktne možnosti nas kontaktirajte preko kontaktnega obrazca. Njdpoy H Ibvjfx Ah Uowg

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Pressure: 300 tons Distance between uprights: 1800 mm Nedogbvkvepfx Ah Uewg Side passages: Yes Installation height: 1000 mm Table: 1800 x 1000 mm Ram: 1800 x 1000 mm Stroke: 600 mm Weight: 43 tons Height: 4700 mm Siemens S7 control system Floor-level installation Sick light curtain Draw cushion: Stroke 200 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1979, številka stroja/vozila: 2386, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 25 t, hod: 100 mm, širina mize: 440 mm, dolžina mize: 320 mm, vgradna višina: 280 mm, hydraulically overhauled SCHOEN double-column press TES 25 Year of manufacture: 1979/2025 Pressing force: 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine will be fully overhauled: - new control system - new light barriers - hydraulics reconditioned Nwodpfxjvw Spmo Ah Usg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, moč: 37 kW (50,31 KM), stiskalna sila: 250 t, hod: 150 mm, širina mize: 900 mm, dolžina mize: 1.000 mm, skupna masa: 16.000 kg, Very nice and well-maintained hydraulic press. 250 tons pressing force. Nsdpfxjry Trpo Ah Uewg Approximate dimensions: H: 380 cm W: 200 cm L: 200 cm Weight: 16,000 kg. Can be loaded by crane upon collection and payment. Transport can be arranged. Sold on behalf of customer. Location: DK-7600 Struer. Please schedule an appointment for a viewing.

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Pressing force: 300 kN, motor power: 37 kW, with hydraulic feed and protective enclosure. Nedpelmmwrofx Ah Uewg

Stanje: rabljeno, Hidravlična dvostebrična stiskalnica Hans Schoen. Tip: UTE 50 Tlačna moč: 50 t Moč motorja: 5,2 kW Višina: 270 cm (s mizo), 195 cm (brez mize) Širina: 118 cm Globina: 95 cm Dvoji ročni upravljalnik Nwjdpfx Asv Spl Ush Uog Stroj je mogoče naložiti z viličarjem. Lokacija: 59939 Oslberg Prejmete račun z izkazanim DDV v višini 7%. #JHOB2

Stanje: potreben popravila (rabljeno), Leto izdelave: 1980, Funkcionalnost: omejena funkcionalnost, Prodaja se hidravlična stiskalnica Hans Schön z močjo 650 kN. Nazadnje je bila v uporabi pred približno 8 leti. Takrat je imela naprava težave s hidravlično cevjo (morda iztekanje hidravličnega olja ali netesno spojko). Težava ni bila odpravljena, saj stiskalnice niso več potrebovali. Sicer je stroj do takrat deloval brezhibno. Stiskalnica nima UVV pregleda! Nwodpjx Ehmyjfx Ah Uog

Stanje: potreben popravila (rabljeno), Leto izdelave: 1972, številka stroja/vozila: 611, Funkcionalnost: omejena funkcionalnost, stiskalna sila: 100 t, Prodaja se hidravlična stiskalnica Hans Schön s kapaciteto 100 ton. Zadnjič je bila v uporabi pred približno 7 leti. Takrat je imel stroj težave s hidravličnim ventilom. To ni bilo popravljeno, ker stiskalnice niso več potrebovali. Sicer je stroj do zadnje uporabe deloval brezhibno. Stiskalnica nima UVV certifikata! Nwedpfox Ehlcsx Ah Uog

Stanje: dober (rabljeno), Leto izdelave: 2000, širina mize: 1.000 mm, dolžina mize: 1.800 mm, širina plošče bata: 600 mm, skupna dolžina: 25.000 mm, skupna širina: 27.000 mm, skupna višina: 47.000 mm, skupna masa: 43.000 kg, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation Nwjdpfxjtiwgis Ah Ujg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on machine) 📦 Condition: Used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing operations • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – ample working space • Stroke: approx. 150 mm – efficient stroke length • Table surface: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (usually with PLC/Siemens control) possible • Safety and UVV-approval for hand insertion operations – increased workplace safety 💡 Thanks to its robust construction, this press is ideal for series production, drawing and forming processes, as well as machining and assembly tasks in metalworking shops. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable fixed stop • Pressure shut-off • Pressure switch Nedpfxsx Ry Nyo Ah Uowg • UVV-compliant safety features → Everything for efficient and safe shop floor operation Currently has valid UVV inspection. ⸻ 🛠️ Areas of Application This press offers a wide range of uses, for example: • Metal forming / drawing operations • Production of assembly and joining components • Testing and quality assurance processes • Mass production and small batch manufacturing ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – solid industrial construction

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: 1204197, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 125 t, hod: 120 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, premer luknje: 52 mm, nastavitev hidravličnega cilindra: 100 mm, Brez minimalne izklicne cene – zagotovljena prodaja najvišjemu ponudniku! Z oddajo ponudbe se zavezujete, da boste stroj prevzeli pravočasno med 23.06.2026 in 26.06.2026! TEHNIČNI PODATKI Tlačna sila: 1.250 kN Nedpfx Aey D Nnleh Uowg Območje vrtljajev: 30 - 250 min⁻¹ Hod batnice: 8 - 120 mm Nastavitev batnice: 0 - 100 mm Premer odprtine čepa: 52 mm Mere mize: 1.100 x 700 mm PODATKI O STROJU Proizvajalec krmiljenja: UNIDOR Pogonska moč: 35 kW Dimenzije in teža Dimenzije (D x Š x V): 6.000 x 2.400 x 3.300 mm Teža stroja: 12.000 kg OPREMA Odvijalec, premer cca 1.200 mm Delavniški predalnik s pritrdilnimi sredstvi Zunanja referenca: 68

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 8319 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €77,982 Leasing rate: €1,326.78 In stock: 1 Special price: €70,200 Press force: 200 tons Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 210 mm Distance between uprights: 2,550 mm Throat depth (side frame): 250 mm Installation height: 445 mm Drive system: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 7 mm/s Return speed Y-axis: 73 mm/s Back gauge travel X-axis: 620 mm (with optional R-axis) Back gauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Oil tank: 150 l Motor power: 15 kW Length: 3,750 mm Width: 1,390 mm Nwedpswiqp Iofx Ah Ueg Height: 2,500 mm Weight: 8,160 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphics display 10" - Intuitive touch screen operation (easy contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of the developed length for sheet cutting - Graphical product and tool library - Correction possibility - USB ports for backup and program transfer - PC software to create programs on PC and transfer via USB to the machine CNC-controlled back gauge with linear guides and ball screws CNC-CONTROLLED CROWNING SYSTEM IN TABLE Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model due to serial production of standardized models without compromising quality and accuracy OPTION: Crowning system motorized and adjustable via CNC control Including: CNC-controlled R-axis (adjustment range in X = 500 mm) Including: DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: rabljeno, Leto izdelave: 2023, Condition: Used Year of manufacture: 2023 Stock number: 7280 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €15,700 In stock: 1 Pressing force: 100 t Bending length: 1000 mm Stroke: 300 mm Motor power: 7.5 kW Length: 2110 mm Width: 1000 mm Height: 2275 mm Weight: 1900 kg Die: 1 Distance between table and tool holder: 680 mm Clear gap between uprights: 1020 mm Working speed: 5 mm/s Rapid traverse: 10 mm/s Max. bending capacity (mild steel): 6 mm Drop-through hole in table: 100 mm Nwedpfxjwiqm Hj Ah Ueg Hole spacing: 190 mm Ex-demo machine / as-new condition Net price (new price €19,550.00) Features: - 2 guide rails - Large ram plate and large support table with T-slots - Top and bottom tools for bending - Pressure gauge - Rapid traverse with automatic switch-over to working speed - Piston stop at any position - Two-hand operation AND foot pedal - Table height adjustable - Operating manual in German and English - Compliance with CE regulations BUYING USED MACHINES IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & functional videos of the actual condition • LIVE CHECK ON SITE Live test at our premises • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Stanje: rabljeno, Horizontalna hidravlična spona Nwedpfx Aey Ud Rpeh Ujg

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 7280 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €15,700 In stock: 1 Pressing force: 100 t Cylinder fixed or movable: fixed Bending length: 1020 mm Stroke: 300 mm Clearance between uprights: 1020 mm Distance between table and tool holder: 680 mm Rapid traverse: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Max. bending capacity (mild steel): 6 mm Table: 500x1020 mm Pass-through hole in table: 100 mm Hole spacing: 190 mm Length: 2110 mm Width: 1000 mm Height: 2275 mm Weight: 2082 kg Demo machine / as-new condition Net price (new price €19,550.00) - 2 guides - Large ram plate and large support table with T-slots - Upper and lower tools for bending included - Pressure gauge - Rapid advance with automatic changeover to working speed - Piston stop at any position Nedpfx Asynm Nmeh Uswg - Two-hand operation AND foot pedal - Height-adjustable table - Equipment according to CE regulations - Operating manual in GERMAN and ENGLISH PURCHASING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & functional videos of the actual condition • LIVE CHECK ON SITE Live test available at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day right of return Details:

Stanje: dober (rabljeno), Leto izdelave: 1970, Presskraft 80 t Durchgangsbreite 350 mm Hub 600 mm Tischabmessung (längs) 400 mm Platzbedarf ca. 1400 x 1050 x 2350 mm Nwedpfx Ajvwgqrsh Ueg Diese Presse befindet sich in sehr gutem Zustand und wurde nur wenig genutzt.

Stanje: rabljeno, Leto izdelave: 2003, Delovna višina 2300 mm, delovna širina 3500 mm, motor 1,5 kW. 3 tlačni cilindri od zgoraj, 2 s strani. Tlačna moč na valj: 3000 kg. Hod tlačnega valja do 200 mm. Hidravlika: 10–150 bar. Potrebni prostor: 3950 x 900 x 2550 mm. Teža: 670 kg. Skladišče: Nattheim. Nedpfx Aovvkmboh Uewg

Stanje: dober (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 646, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, stiskalna sila: 300 t, hod: 300 mm, širina mize: 380 mm, dolžina mize: 320 mm, višina mize: 300 mm, kapaciteta rezervoarja za olje: 200 l, skupna dolžina: 1.000 mm, skupna širina: 700 mm, skupna višina: 2.350 mm, skupna masa: 2.500 kg, Oprema: CE označba, dokumentacija / priročnik, I am selling a hydraulic PRESS MADOM - Type: OM300 - Year: 1993 - Serial No.: 646 - Power: 300 Ton - Weight: 2500 kg - Machine height: 2350mm - Machine width: 700 mm - Machine length: 1000 mm - Max. working height: 300 mm Nwsdpfx Ahsy Snnys Ueg - Max. working width: 380 mm - Max. working length: 320 mm - The hydraulic press is little used, in excellent condition and works flawlessly. The machine is connected to the electrical network and ready for testing.