Ge Plinska Turbina nakup rabljenega (9.221)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Budapest
342 km
Plinska turbina
GELM6000
Pokliči
Leto izdelave: 2007, obratovalne ure: 25.300 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 192-237, Plinska turbina LM 6000 je dvovrtinčna aeroderivativna turbina, ki je z generatorjem povezana preko redukcijskega gonila. Nazična moč pri ISA pogojih je 45 MW. Plinska turbina je obratovala izključno na zemeljski plin. Turbina je imela zgolj 25.300 obratovalnih ur, ko je bila poslana na tovarniški pregled in predelavo v GE tovarno.
Iijdpfx Aaey Dq Duo Uea
Pregled turbine in konverzija PD-PF sta bila izvedena leta 2025. Plinska turbina je opremljena s SPRINT sistemom, za višjo moč pri višjih zunanjih temperaturah. Po PF predelavi emisijske vrednosti turbine ustrezajo standardom GE.
Ta komplet ne vključuje hidravličnega zaganjača, sistema mazalnega olja, protihrupnega ohišja, sesalnega zračnega sistema, ter zaščitnega in krmilnega sistema!
Mali oglas
La Muela
1.382 km
Plinska turbina na zemeljski plin
SolarTaurus 65
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 6.300 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, gorivo: gospodinjski plin H, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Turbina de gas Solar Taurus 65 Solonox (6,3 MWe), lista para entregar.
Descripción del paquete: Taurus 65 8401S (6,3 MWe ISO), generador Solar RGB & Leroy Somer 6,3 kV
Año de fabricación: Paquete 2011; la turbina de gas y la caja de engranajes fueron sustituidas por unidades nuevas en 2022
Arranques: 14 arranques de motor / 399 arranques de paquete
Horas de funcionamiento (turbina de gas y caja de engranajes): 2.423 horas
Ubicación: España – la unidad se encuentra almacenada en nuestras instalaciones cubiertas y climatizadas. El grupo electrógeno está disponible actualmente en nuestro almacén en Zaragoza, España. No dude en visitarnos en cualquier momento.
Alcance del suministro:
Paquete principal en contenedor, incluyendo:
- Turbina de gas generadora SOLONOX Taurus 65 (T65) – 2.423 horas de funcionamiento
- Alternador de 6.300 V
- Cuadros de control
- Módulo de detección de incendios
- Tren de gas
- Filtro de entrada de aire
- Conducto de salida de aire
- Enfriador de aceite
- Compresor de gas
- 2 depósitos de almacenamiento de gas
- Enfriador para compresor de gas
Isdpfxoytpbie Aa Uoia
Sistema de control:
- Sistema de control TTS4 integrado en bancada (basado en Siemens S7)
Documentos disponibles:
- Informe oficial de inspección boroscópica realizado por Solar tras la parada
- Informe de mantenimiento del alternador
- Certificado oficial de Solar confirmando la sustitución de turbina de gas y caja de engranajes por unidades nuevas en 2022
- Hoja técnica oficial del paquete completo
Información adicional:
- Última generación de energía: finales de 2023
- Preservación: unidad almacenada en edificio cubierto y climatizado
- Plazo de entrega: inmediato
Mali oglas
Essen
835 km
Priklopnik z delovno ploščadjo
ES-GETandemanhänger - Bordwände, CV
Pokliči
Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website.
Excerpt from equipment specification. Full equipment details available upon request.
Chassis:
* Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity
* Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame
Underride guard:
* According to EC regulations
Front landing gear:
* Single-sided operated landing legs
Rear support:
* Two adjustable drop legs
Axles:
* 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function
Tyres:
* 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset
Iiodjy Auhbopfx Aa Usa
Splash protection:
* PVC spray guards in front of and behind axles, EC compliant
Load securing:
* On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame)
* 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t
* Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed
Brake system:
* Compressed air brake system according to EC regulations with EBS
* Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads
* Spring-loaded parking brake acting on one axle
Floor:
* Approx. 28 mm Z-hardwood floor recessed into the outer frame
Front wall:
* Made from 25 mm removable front board
Lighting system:
* Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs
Accessories:
* 2 wheel chocks with holders
* Removable warning beacon at the rear
* Additional 40 mm coupling device supplied (max. GVW 13,500 kg)
* Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm
* Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053
* 4 rows of crosswise stake pockets evenly distributed across the loading platform
* 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452
* 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles
* 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall
Paintwork:
* Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards
* Structure parts cleaned, primed and hot-dip galvanized
* Chassis: Hot-dip galvanized & RAL 3002 carmine red
* Side walls: RAL 3002 carmine

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs-Sattelanhänger, Bordwände
Pokliči
Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Complete equipment details on request.
Chassis:
* Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads.
Coupling Device:
* Fifth wheel plate with 2-inch kingpin.
Underrun Protection:
* In accordance with EC regulations, bolted design.
Side Protection:
* In accordance with EC regulations.
Landing Legs:
* 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction).
Axles:
* 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm).
* Air suspension control via manual regulator with stop function.
Steering:
* Last axle steered automatically by rod linkage.
Axle Lift:
* First axle liftable, with fully automatic, load-dependent lift control.
Brake System:
* Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck.
* Manufacturer: Wabco.
Tyres:
* 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer).
Mudguards:
* In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly.
Load Securing:
* 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each).
* 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each).
* On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame).
Stanchion Pockets:
* 10 pairs of stanchion sockets on the outer frame, evenly distributed.
* 4 rows of stanchion sockets across the loading area.
* Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm.
* Rack inside front wall for 20 plug-in stanchions.
Front Wall:
* Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high).
Floor:
* Approx. 28 mm Z-hardwood floor fitted into the outer frame.
Sideboards:
* 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions.
* Sideboard and stanchion magazine: under the chassis.
* Insertion rails for sideboards and stanchions on left and right.
Lighting System:
* In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights.
* 1 x 15-pin and 2 x 7-pin socket connectors on front cross member.
Iiedpfx Aajy Auhze Uja
Equipment:
* Wheel chocks with double holder.
* Warning signs according to ECE 70.
* Work spotlight on lamp bracket (actuated via reverse gear).
* Bracket for beacon at rear, including beacon.
* 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm.
Paintwork:
* Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour.
* Chassis: hot-dip galvanized + RAL colour of your choice.
* Front wall: RAL colour of your choice.
* Sideboards: anod
Mali oglas
Essen
835 km
Priklopnik z delovno ploščadjo
ES-GETandemanhänger - Rungen - CV
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.180 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and soon-available stock on our website.
Excerpt from the features list. Full specification available on request.
Chassis:
* Welded steel construction with welded longitudinal beams and perforated Z-cross members, closely spaced cross members for high floor load capacity
* Ramp compartment: between the longitudinal beams, behind the axle assembly underneath the loading floor, two insertion pockets for one each loading ramp, with locking plate in the rear headframe
Underrun Protection:
* According to EU regulations
Landing Gear:
* Front: landing legs with one-sided operation
* Rear: two adjustable drop supports
Axles:
* 2 x 10 t air suspension axle assembly, manufacturer SAF, drum brakes approx. 300 x 200 mm, center-aligned for twin tires, ABS, total air suspension stroke approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), operated via hand lever with detent function
Tires:
* 8-fold, 235/75 R17.5 – our choice of brand. Mounted on 6.75x17.5 wheels with offset
Spray Protection:
* PVC, in front of and behind the axles, according to EU regulations
Load Securing:
* On outer frame, approx. every 150 mm, a hole for lashing straps, tensile strength approx. 2.5 t
Iodpfxoy Auf To Aa Usia
* 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t
* Stake pockets for slip-in stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed
Brake System:
* Compressed air brake system as per EU standards with EBS
* Two spirals as connection to the towing vehicle with red/yellow coupling heads
* Spring-loaded parking brake acting on one axle
Floor:
* Approx. 28 mm Z-hardwood floor sunk into the outer frame
Lighting System:
* Lighting system as per EU standards, 24 volts, multi-chamber tail lights, license plate lights, side marker and track marker lights at the rear, connection plate on the left drawbar, incl. interconnection cable with 15-pin and 2 x 7-pin connectors
Accessories:
* 2 wheel chocks with holder
* Removable flashing beacon at the rear
* 40 mm towing device supplied (max. gross weight 13,500 kg)
* Rear extension approx. 800 mm including underrun protection, extendable loading platform with load capacity approx. 2 t, locking positions every 200 mm
* Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm as per DIN 74053
* 4 rows of crosswise stake pockets across the load floor, evenly distributed
* 12 galvanized steel stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1 x 20’ container
* Container locks for 1 x 20’ container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452
* 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles
Paintwork:
* Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technical standards
* Superstructure parts cleaned, primed, and hot-dip galvanized
* Chassis: hot-dip galvanized + RAL 9011 graphite black
* Outer frame: hot-dip galvanized + RAL 9010 pure white
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Add-on parts: galvanized / KTL black
Mali oglas
Bovenden
710 km
Polpriklopnik z nizko nakladalno ploščadjo
ES-GE2 STL-38-1N-R, hydr. Rampen, Verbr. auf 3m,
Pokliči
Stanje: rabljeno, lastna masa: 9.140 kg, največja dovoljena obremenitev: 28.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2007, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 2 osi, zračno vzmetenje, zadnja os vodilna, ABS (protiblokirni sistem), razširljiv do 3 m, pritrdilna ušesa, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, podpore, dvojna montaža pnevmatik. Nadgradnja: 2-osna nizkopodna polprikolica s hidravličnimi rampami. Vse informacije brez garancije, ker je polprikolica v tranzitu! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane!
Iodoyzgndopfx Aa Ueia
Mali oglas
't Harde
960 km
Nizki nakladalnik
Es-geS3D H3-01
Pokliči
Stanje: rabljeno, številka stroja/vozila: W09BLH3556EE32123, Leto izdelave: 2006, Contact Theo Lelie for further information.
Iisdpjy Dgkqsfx Aa Usa
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs-Ballastauflieger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Excerpt from specifications. Complete specification available upon request.
Chassis:
* Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads
* Outer frame as UNP profile
* Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide
Coupling Device:
* 2-inch kingpin (also suitable for 3.5-inch reception)
Underride Guard:
Iiedpjyz E T Sofx Aa Usa
* In accordance with EC regulations, bolted design
Side Impact Protection:
* In accordance with EC regulations
Landing Legs:
* 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot
Axles:
* 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function
* Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket
* Smartboard/TIM/Infocenter, no TPMS display
Lift Axle:
* First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery
Brake System:
* Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand
Tyres:
* 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm
* Basic version tyre pressure monitoring, connected to the EBS CAN bus system
* Tyre pressure display in the cab (pre-installed by tractor manufacturer)
Mudguards:
* In accordance with EC, PVC mudguards (semi-shell) over all axles
* Mud flaps with anti-spray
Load Securing:
* 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t)
* 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t)
Stake Sockets/Posts:
* 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm
* 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom
Front Wall:
* Bolted front wall, approx. 1,200 mm high, panelled with sheet metal
Stake Magazine:
* Magazine for removable posts inside front wall
Floor:
* Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles
Lighting System:
* EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights
* 1x15-pin and 2x7-pin sockets on the front cross-member
Equipment:
* Warning panel according to ECE 70
* 2 LED work lights on lamp bracket (switched via reverse gear)
* Bracket for revolving beacon at rear (including beacon)
* 1 rear access ladder, foldable and extendable (without platform)
* 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall
* Smartboard with axle load display
* 2 LED work lights above the front wall, switchable via chassis frame switch
* 2 LED work lights at the height of the support legs (switched via revers
Mali oglas
Balaguer
1.234 km
Električni servo motor
GE FANUCA06B-0854-B190
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A06B-0854-B190, Servo Motor
Iiedpfxer Nbkps Aa Uoa
Brand: GE Fanuc
Model: 6
Motor specification: A06B-0854-B190
Specifications:
Power: 7.5 kW
Frequency: 50/60 Hz
Current: 44 A
Voltage: 135-222V AC
Speed: 1500-8000 RPM
Mali oglas
Győr
265 km
Indukcijski motor
GECustom 8000
Pokliči
Stanje: zelo dobro (rabljeno), Nazivna moč: 400 KM
Obrati: 1475 min⁻¹
Napetost: 380 V, 3-fazni, frekvenca 50 Hz, koda A
Tok: 542 A
Velikost okvirja: 8188DZ, tip K
Ijdon Uwpfopfx Aa Usia
Moč: 460 KM, časovna ocena: neprekinjeno
temperaturni dvig: 90 °C (merjeno z upornostjo)
Ležaj na pogonski strani: AFBMA 80BC03
Ležaj na čelni strani: AFBMA 80BC03
Mazanje: mast
GE specifikacija: D6A2C5
Stroj je v dobrem delovnem stanju. Prosimo, da si ogledate tudi ostale naše oglase.
Mali oglas
't Harde
960 km
Nizki nakladalnik
Es-ge6.SOU-4H-1N
Pokliči
Stanje: rabljeno, Leto izdelave: 2007, Contact Theo Lelie for further information.
Iiodpfjyrtm Hex Aa Uea
Mali oglas
Budapest
343 km
Sistem za razširjanje celic
GE HealthcareXuri W5
Pokliči
Leto izdelave: 2015, stanje: dober (rabljeno), GE Healthcare Xuri Cell Expansion System W5 mit Perfusionsmodul und CO2-Mischer
Guter funktionsfähiger Zustand. Bitte sehen Sie sich auch unsere anderen Angebote an.
Ijdon I Uqrspfx Aa Ujia
Mali oglas
Duxford
1.264 km
GE Healthcare BPG 200/270 Axichrom kolona
GE HealthcareBPG 200/270
Pokliči
Stanje: rabljeno, Ta oglas je za GE Healthcare BPG 200/270 Axichrom kolono.
Enota je v popolnoma delujočem stanju in pripravljena za takojšnjo uporabo.
Isdpfxsyrrvgj Aa Ujia
GE Healthcare Axichrom BPG 200/270 je visokozmogljiva kromatografska kolona, namenjena preparativnemu in procesnemu čiščenju. Pogosto se uporablja v biofarmacevtski proizvodnji, ločevanju proteinov in raziskovalnih aplikacijah. Kolona zagotavlja stabilno polnjenje, učinkovito porazdelitev pretoka in dosledno ločevalno zmogljivost za laboratorijske in industrijske postopke.
Mali oglas
Duxford
1.264 km
GE Healthcare BPG 300/750 Axichrom kolona
GE HealthcareBPG 300/750
Pokliči
Stanje: rabljeno, Ta oglas je za GE Healthcare BPG300/750 Axichrom kolono. Enota je v popolnoma delujočem stanju in pripravljena na takojšnjo uporabo. GE Healthcare Axichrom BPG 300/750 je visokozmogljiva kromatografska kolona, zasnovana za preparativno in procesno čiščenje. Široko se uporablja v biofarmacevtski proizvodnji, ločevanju proteinov in raziskovalnih aplikacijah. Kolona omogoča stabilno polnjenje, učinkovito porazdelitev toka in dosledno separacijsko zmogljivost za laboratorijske in industrijske procese.
Isdpfx Ajyrru Nsa Ujia
Mali oglas
Duxford
1.264 km
GE Healthcare BPG 200/950 Axichrom kolona
GE HealthcareBPG 200/950
Pokliči
Stanje: rabljeno, Ta oglas je za kromatografski stolpec GE Healthcare BPG 200/950 Axichrom.
Enota je popolnoma delujoča in pripravljena za takojšnjo uporabo.
Iisdeyrrpgjpfx Aa Uea
GE Healthcare Axichrom BPG 200/950 je visokozmogljiv kromatografski stolpec, zasnovan za preparativno in procesno čiščenje. Široko se uporablja v biofarmacevtski proizvodnji, pri ločevanju beljakovin in v raziskovalnih aplikacijah. Stolpec zagotavlja stabilno polnjenje, učinkovito porazdelitev pretoka in dosledno separacijsko zmogljivost za laboratorijske in industrijske postopke.
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE5-Achs-Ballastauflieger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website.
Excerpt from the equipment features. Full equipment details available upon request.
Chassis:
* Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity
* Outer frame: UNP steel
Towing device:
* 2-inch king pin
Underrun protection:
* In accordance with EC regulations, bolted design
Side impact protection:
* In accordance with EC regulations
Landing legs:
* Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t
Axles:
* 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm
* ABS
* Centrally located 10-hole wheel connection with offset ET 0
* Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function
Steering:
* 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage
* Centralized lubrication points positioned externally
Axle lift:
* First and second axles can be raised automatically, with additional deactivation on the chassis
Brake system:
* Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand
* Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit
* Aluminium air reservoirs
Tyres:
* 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice
TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit
Mudguards:
* In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard
* Rear mudguards with spray flaps
Load securing:
* 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t)
* 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t)
* 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t)
Stake pockets:
* 10 pairs of stake pockets recessed into the outer frame
* 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame)
Insertable stakes:
* 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length
Stake magazine:
* One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall
Front wall:
* Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height
Floor:
* Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted
Lighting system:
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights white at the front
* LED outline lights rear
* Number plate lights 1x15 and 2x7-pin connector at the front panel
Equipment:
* Two wheel chocks with holder
* Warning panel as per ECE 70
* Work spotlight on light carrier (activated by reverse gear)
* Holder for rotating beacon at the rear (including beacon)
* Fixed access ladder on both left and right, including plug-in step
* Smart Board
* Sticker: "Vehicle swings out" and load center of gravity indication
Paintwork:
* Chassis and front wall blast-cleaned and high-quality top-coated
Iijdjwx Dcaspfx Aa Uea
* Chas
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE4-Achs-Ballastauflieger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Extract from the equipment features – full specifications available upon request.
Chassis:
- Chassis frame construction made of welded longitudinal beams and pass-through cross members
- Rear under-run bar approx. 700 mm wide
- Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams
- Cross member spacing max. 400 mm (for longitudinally laid floor)
- King pin 3.5 inch according to SAE standard, replaceable
- Outer frame as UNP 200, open to the outside
Landing Gear:
- 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot
Axles:
- 4 x 10 t SAF axles with large drum brake
- 22.5 single tires
- Axle distances approx. 1,700/1,810/1,810 mm
- Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco
- Holder for lifting and lowering device, bolted version
Brake:
- Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle)
- Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm
- Tire pressure monitoring basic version, connected to the EBS CAN bus system
- With dual release valve for brake and spring actuator
- Test nipple for brake cylinder pressure at right front brake cylinder
- 1 red and 1 yellow coupling head each
- Lifting/lowering device mounted in driving direction rear left
- EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside!
Tires:
- 8 x 445/65 R 22.5 premium brand tires of our choice
- Central centering
Lubrication:
- Grease nipple strips at the bogies and at the steering front. No central lubrication
Superstructure:
- Without body certificate according to DIN EN 12642 XL
- 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket
- Front wall for platform, reinforced version
- Side contour marking yellow, rear yellow
- Front wall approx. 800 mm high, with sheet metal cladding, bolted version
Lighting:
- 2x LED work lights, mounted in lamp panel, switched via reverse gear
- 2x LED work lights, switched via reverse gear, 1 each side near landing gear
- 2x LED reversing lights, 1 per side in front of the 1st axle
- Lighting/wiring system brand of our choice
- Number plate lighting
- The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light)
- Position marker lights at the front, lower, white, 1 per side left and right (LED)
- 24V lighting system with large multifunction rear lamp
- Side marker lights (LED) flashing
- 1x 15-pin and 2x 7-pin sockets in multifunction box at the front
- EBS socket output
- 1 pair lane keeping lights (LED)
Iodpfewx Dctjx Aa Usia
Floor:
- Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles
Paint/Coating (no metallic shades):
- Chassis painted in RAL color of choice
- Front wall (steel construction) in RAL color of choice
- Axle hubs matching chassis color
- Axles and landing gear black
- Wheels in aluminum/silver similar to RAL 9006
- Wheel nuts untreated
- Under-run protection painted RAL 9010 pure white (aluminum)
Accessories:
- Lifting device for 1st axle
- 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each
- 12 RUD-SLP lashing points per side with
Mali oglas
Langenfeld (Rheinland)
808 km
EKG v mirovanju
GE cam connect 14incl. CardioSoft V7 many in stock
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a nearly new resting ECG unit "GE CAM Connect 14".
Item for sale:
1 x GE CAM Connect 14 with the following features:
- Mobile, deployable resting ECG
- 12 or 15 leads
- Easy integration into MUSE and PACS systems
- With automatic arrhythmia detection
- DICOM-compatible
Condition:
This offer is for a used device, which may show signs of wear (minor scratches or yellowing).
The device has been functionally tested.
Packaging and shipping:
You are welcome to inspect the device during our business hours. Please schedule an appointment for this!
Sea-worthy packaging and worldwide shipping available on request!
For further information, please feel free to contact us directly.
Iodpfx Aewr Anbsa Ujia
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs-Ballastauflieger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 39.850 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website.
Excerpt from the equipment features. Full equipment specification available upon request.
Chassis:
* Welded construction made from high-quality steel profiles with punched crossmembers
* Designed for high point loads. Outer frame as UNP profile
* Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide
* Mounting interface for customer-side installation of a support device at the front, approx. 90 x 90 x 4 mm
Coupling device:
* 2-inch king pin (also suitable for 3.5)
Underrun protection:
* According to EC regulations, bolted version
Side impact protection:
* According to EC regulations
Landing gear:
* 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) with S-foot
Axles:
* 3 x 9 t air suspension axle units, brand of our choice, with disc brakes approx. 430 x 45 mm
* ABS
* Wheel connection, center guided, 10-hole with offset 120
* Total lift of air suspension approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, control via rotary slide valve with detent feature, with RTR function
* Switch for second ride height (+ approx. 50 mm) mounted at the lifting/lowering unit bracket
* Smartboard/TIM/Infocenter, no TPMS display
Lift axle:
* First axle liftable, with fully automatic, load-dependent lift control, start-up aid via button in driver’s cab (15-pin socket PIN12). Button in driver’s cab not included in delivery
Brake system:
* Manufacturer of our choice
* Two-line compressed air braking system according to EC with EBS and RSS, automatic load-dependent control
* Spring actuators as parking brake
* Mismating-proof coupling heads permanently mounted to the front crossmember, without connecting line to truck
Tyres:
* 6 pieces, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), offset 120
* Basic version tyre pressure monitoring, connected to EBS CAN-bus
* Tyre pressure indicator in driver’s cab (pre-installed by chassis manufacturer)
Mudguards:
* According to EC, PVC mudguards (half-shell) over all axles
* Anti-spray mud flaps
Load securing:
* 8 pairs of hook plates welded into outer frame (tensile strength approx. 3 t)
* 6 pairs of lashing rings mounted on side of outer frame, evenly distributed (tensile strength approx. 10 t)
* 13 pairs of lashing points (hoops) in outer frame (tested lashing capacity approx. 2.5 t per point)
Stake pockets/Posts:
* 5 pairs of stake pockets recessed in outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm
* 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with lower stop
Front wall:
* Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal
Stake magazine:
* Magazine for plug-in stakes inside front wall
Floor:
* Approx. 28 mm hardwood floor recessed into outer frame, with galvanized omega steel profiles
Lighting system:
* According to EC, 24 volts with multi-chamber lights
* LED side marker lights
* White LED position lights at front
* LED outline marker lights at rear
* License plate lights
* 1 × 15-pin and 2 × 7-pin sockets on front crossmember
Equipment:
* Two wheel chocks with holders
* Warning plate according to ECE 70
* 2 LED work lights on lamp carrier (switched via reverse gear)
* Bracket for rotating beacon at rear (including rotating beacon)
Iedswx Dbpepfx Aa Ujia
* 1 foldable an
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Pokliči
Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website.
Extract from the equipment. Complete equipment list available on request.
Chassis:
* Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads
* Underrun beam approx. 700 mm wide
* Outer frame as UNP profile
* Fifth wheel plate approx. 8 mm
* Neck height at the front approx. 130 mm
Coupling Equipment
* 2-inch king pin
Underrun Protection
* Bolted version according to EC regulations
Side Impact Protection
* According to EC regulations, made from anodised aluminium profiles
Landing Legs
* 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR)
Axles
* 3 x 9 t air suspension axles with disc brakes, 22.5"
* Total lift approx. 180 mm
* Lifting and lowering device via rotary valve
Brake System
* Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control
Iodpfsw U H Sbjx Aa Usia
* Spring-actuated cylinders as parking brake
* Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit
Tyres
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion
* Tyre pressure monitoring (TPMS) via EBS CAN-bus system
Mudguards
* According to EC regulations
Spare Wheel Carrier
None
Load Securing
* 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t
* In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps
Front Wall
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles
Lighting System
* According to EC regulations, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights white front
* LED outline lights rear
* Licence plate lights
* Lane marker lights, LED
* 1x15- and 2x7-pin plug sockets at the front cross member
Equipment
* 2 wheel chocks with holders
* ECE 70 warning signs
* Bracket for rotating beacon, incl. rotating beacon
* 2 rear rubber buffer stops
* Access ladder rear right, foldable and extendable (without platform)
* 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles
Paintwork
* Front wall: single-colour RAL as per request
* Chassis: hot-dip galvanised
* Outer frame: hot-dip galvanised + single-colour RAL as per request
* Centre stanchions: single-colour RAL as per request
* Side underrun protection: aluminium, anodised
* Underrun protection: white (RAL 9016 traffic white)
* Attachments: galvanised/KTL black
* Rims: silver
Contour Marking
* Complete, yellow
Including Special Accessories
* First axle liftable, with fully automatic, load-dependent lifting control
* 10 pairs of stanchion pockets in the outer frame, evenly distributed
* 4 rows of stanchion pockets transverse to the loading area
* 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm
* Internal magazine for 20 plug-in stanchions on the front wall
* 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable
* Removable Kinnegrip stanchions
* Sideboard and stanchion magazine: insertion
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs Megatrailer, hydr. Heckabsenkung
Pokliči
Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Partial list of equipment. Full equipment list available on request.
Chassis:
* Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame
* Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm
* Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports
* Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control
* Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck)
Coupling Device:
* 2-inch king pin, replaceable from below
Underride Protection:
* Fixed installation as per EU regulations
Landing Legs:
* 2 x 12 t support legs with 2-speed gear
Axles:
* 3 x 9 t air-suspended axle units
* SAF brand with disc brakes approx. 370 x 45 mm
* ABS
* 10-hole centrally located wheel bolt circle, ET120
* Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm
* Air suspension control via hand lever with stop function
Lifting Axle:
* 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket
Tyres:
* 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120
Mudguards:
* As per EU standards, 1/4 PVC mudguards
* 1st axle front and rear; 2nd and 3rd axles rear
Brake System:
* Wabco brand
* Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control
* Spring-actuated parking brake active on 2 axles
* Reversed coupling heads solidly mounted on front crossmember, no connection line to truck
Lighting Equipment:
* As per EU standards, 24 Volt
* Multi-chamber tail lights
* Number plate lights
* LED side marker lights
* White LED position lights at the front and LED lane marker lights at the rear
* 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck
Load Securing:
Iiedpjwt Iylefx Aa Usa
* 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t
* 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t
* 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t
* On the outer frame, holes for lashing straps every approx. 500 mm
Stake Pockets:
* 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm
Stake Pocket Sockets:
* 8 per side recessed into the outer frame
* 4 rows of sockets transversely across the loading area
Floor:
* Approx. 28 mm Z-hardwood floor, recessed in outer frame
Front Wall:
* Solid front wall
* Storage for 16 plug-in stakes approx. 100/40
* Front wall bolted to head frame
Equipment:
* 2 wheel chocks with holders
* 2x PVC toolbox, approx. 600/400/500 mm
* Rear rotating beacon holder incl. beacon
* 2 LED reversing lights (at rear)
* 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs Sattelanhänger - Rungen + CV
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website.
Excerpt from the equipment list. Full specifications available on request.
Chassis:
* Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads
Coupling System:
* 2-inch kingpin
Underrun Protection:
* Bolted design, compliant with EC regulations
Side Guard:
* EC compliant
Landing Legs:
* 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right
Axles:
* 3 x 9 t air suspension axle units
* Disc brakes
* Make: Gigant
Brake System:
* Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution
* Spring brake cylinders as parking brake
* Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit
* Make: Wabco
Tyres:
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120
Mudguards:
* EC compliant, PVC mudguards in front of and behind the axle assembly
Spare Wheel Holder:
* 1 double basket with mounting kit for a spare wheel with ET 120
Load Securing:
* 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t
* 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t
* Outer frame drilled approx. every 500 mm for lashing straps
Front Wall:
* Reinforced steel construction, fixed
* Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high)
Floor:
* Approx. 28 mm Z-hardwood floor set into outer frame
Lighting System:
* EC compliant, 24 volt, with multi-chamber tail lights
* LED side marker lights
* LED front position lights (white)
* LED rear outline lights
* Number plate lights
* 1x 15-pin and 2x 7-pin sockets on front beam
Painting:
* Chassis and front wall cleaned by sandblasting, primed, and painted in solid color
* Chassis: RAL 3002 carmine red
* SSV: aluminum anodized
* Underrun protection: white RAL 9010
* Attachments: galvanized/KTL black
* Rims: silver
Incl. special equipment:
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading platform
* 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm
* Interior of the front wall with magazine for 20 plug-in stakes
Isdpfx Ajwyhy Eoa Usia
* Container locks for 1 x 40' and 2 x 20' containers, flush with rear
* Container locks for 1 x 20' container centered
* Work lamp on lamp bracket (activated via reverse gear)
* 2 PVC toolboxes, approx. 660 x 400 x 500 mm
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs Sattelanhänger - Rungen + CV
Pokliči
Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website.
Extract from the specification. Full equipment list available on request.
Chassis:
* Welded construction using high-quality steel profiles with through cross members, designed for high point loads
* Underrun nose width approx. 700 mm
* Outer frame as UNP profile
* Scuff plate approx. 8mm
* Neck height at the front approx. 130 mm
Towing Equipment
* 2-inch kingpin
Underrun Protection
* Bolted version, compliant with EC regulations
Side Impact Protection
* According to EC, made from anodized aluminium profiles
Landing Legs
* 2 x 12 t landing legs with compensating foot and single-sided operation on front right
Axles
* 3 x 9 t air suspension axle units
* 22.5" disc brakes
* Total stroke approx. 180 mm
* Lifting and lowering device operated by rotary slide valve
Braking System
* Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control
* Spring-loaded cylinders as parking brake
* Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck
Tyres
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120
* Brand of our choice
* Tyre pressure monitoring (TPMS) via EBS CAN bus system
Mudguards
* According to EC
Spare Wheel Carrier
* Not included
Load Securing
* 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t
* 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t
* Holes for lashing straps in the outer frame at approx. 400-600 mm intervals
Front Wall
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm
Floor
* Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles
Lighting System
* According to EC, 24 volt, with multi-chamber lights
* LED side marker lights
* LED position lights, white, front
* LED outline marker lights, rear
* License plate lights
* Lane marker lights, LED
* 1x15- and 2x7-pin socket connectors on the front crossmember
Equipment
* 2 wheel chocks with holder
* ECE 70 warning plates
* Holder for rotating beacon including rotating beacon
* 2 rubber buffer stops at rear
* Foldable and extendable access ladder at the rear right (without platform)
* 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles
Paintwork
* Front wall: single RAL color of your choice
* Chassis: hot-dip galvanized
* Outer frame: hot-dip galvanized + single RAL color of your choice
* Side protection: aluminium anodized
* Underrun protection: white (RAL 9016 traffic white)
Iisdpsugqvfjfx Aa Uea
* Attachments: galvanized/KTL black
* Wheel rims: silver
* Contour marking: complete yellow
Including special equipment
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stanchion pockets in outer frame, evenly distributed
* 4 rows of stanchion pockets transversely to loading area
* 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm
* Magazine for 20 plug-in stanchions on inside of front wall
* Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear
* Container locks for 1 x 20’ container centered
* Work light at lamp bracket (activated in reverse gear)
* 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac
Mali oglas
Vääna
1.600 km
3D tiskalnik za kovine
GE AdditiveArcam EBM Q20plus
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, skupna dolžina: 2.400 mm, skupna višina: 2.945 mm, skupna širina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 2.900 kg, vhodna napetost: 400 V, laserska moč: 3.000 W, Eden najboljših modelov 3D tiskalnikov za kovine na trgu. Visoka tehnologija, zelo natančen in hiter, omogoča tiskanje iz nerjavnega jekla in titana. Namenjen je letalski industriji, a je uporaben tudi za druge sektorje.
Tip stroja: 3D tiskalnik
Proizvajalec: GE Additive
Model: Arcam EBM Q20plus
Leto izdelave: 2018
Stanje: rabljeno
Funkcionalnost: popolnoma delujoče
Iisdpfx Aaovmpq To Uoa
Cena: 59.000 € (naloženo na tovornjak). Najugodnejša cena za tiskalnik takega razreda!
Zapakiran v originalne zabojnike proizvajalca, pripravljen za odpošiljanje.
Podatki proizvajalca:
Maks. velikost gradnje: 350 x 380 mm (Ø x V)
Maks. moč žarka: 3 kW
Tip katode: enokristalna
Min. premer žarka: 140 μm
Maks. hitrost pomika elektronskega žarka: 8.000 m/s
Aktivno hlajenje: vodno hlajeni toplotni izmenjevalnik
Minimalni tlak v komori: 5 x 10⁻⁴ mbar
Tipična atmosfera v komori: 4 x 10⁻³ mbar (delni tlak He)
Poraba He med gradnjo: 4 l/h
Poraba He pri zračenju: 100-150 l/gradnjo
Napajanje: 3 x 400 V, 32 A, 7 kW
Dimenzije (Š x G x V): cca 2.400 x 1.300 x 2.945 mm
Teža: 2.900 kg
CAD vmesnik: standardno STL
Materiali:
- Arcam EBM Ti6Al4V Grade 5, P-Mtrl
- Arcam EBM Ti6Al4V Grade 23, P-Mtrl
Mali oglas
Duxford
1.264 km
Kromatografski stolpec GE Healthcare Cytiva Axicrom 140/500
GE HealthcareAxicrom 140/500
Pokliči
Stanje: rabljeno, Ta ponudba je za GE Healthcare (zdaj Cytiva) GE Axicrom 140/500.
Enota je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo.
AxiChrom je družina velikih, nizkotlačnih kromatografskih kolon, ki jih proizvaja GE Healthcare.
Oznaka '140/500' se nanaša na kolono z notranjim premerom (ID) 140 mm in višino ležišča do 500 mm (t.i. različica 'long-tube').
Tipične uporabe:
Razvoj procesov, poskusi povečave ter mala/polna proizvodnja biomolekul (npr. proteinov, protiteles) v biofarmacevtski ali biotehnološki industriji.
Iedoxhdw Tjpfx Aa Ujia
Kot del čistilnih postopkov, kjer so potrebne velike količine in visok pretok, vendar še vedno pod nizkim tlakom (t.j. ne visokotlačna tekočinska kromatografija).
Olajšamo vam iskanje: "ge plinska turbina"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec















































































































































































































