Fliegl Vts S 400 Parab/Hydr. nakup rabljenega (92.611)

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) Gisdoi Ri Dajpfx Anfot 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: novo, številka stroja/vozila: 15431365fe5515297a6a9fb05, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Half-shell mudguards on 1st and 2nd axles with antispray mud flaps behind each axle, antispray mud flaps before and after 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points each 5 t located in the excavator arm recess on the side at the main frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, can be locked with a padlock (lock not included) 1 storage box recessed into the floor at the gooseneck, with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm 70 mm timber planks for extension to 3,000 mm Storage compartment for timber planks under the loading platform Lashing eyes (40 securing options) 1 pair lashing eyes on gooseneck, each 5 t 9 pairs lashing mushrooms integrated on top and side of outer frame, each 10 t 2 x on gooseneck to the front 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each 5 t (for tension belt attachment) 3 pairs of additional folding lashing eyes, each 10 t 1 x inside next to the main frame at the beginning of the low-bed 1 x on gooseneck (protruding) 1 x recessed behind the last axle Trailer towing device turntable Drawbar with tested 50 mm towing eye, towing eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum braked axles Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) front and rear Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, operated via sidelights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel chequer plate covering Followed by 70 mm softwood floor, wheel arch area with steel chequer plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber overlay Spring-assisted lifting Giodpfx Asi Ri A Sonfst Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for double-line licence plate holder Conspicuity marking with reflective strips according to ECE R 048, white at the side and red at the rear Warning panel according to ECE - 70 Coating Frame hot-dip galvanized incl. passivation, 15-year corrosion guarantee Drawbar galvanized or black, as per the manufacturer's choice Loading ramps hot-dip galvanized Attention! Archive pictures shown!

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Godpfxsi Ri Dls Anfjit Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, Leto izdelave: 2010, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Gijdpfx Aeyxq A Henfot Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: novo, številka stroja/vozila: ee3256d63dd23b3ad1bdf9ab0, lastna masa: 10.280 kg, največja dovoljena obremenitev: 13.720 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support legs 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Quarter shell fenders in front of the 1st axle Excavator arm trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated at 5 t each in the excavator arm trough, positioned laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear taper 1 storage box recessed into the gooseneck on the floor with lid, W=720 mm/ L=520 mm / D=170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 1600 mm, approx. 400 mm deep. Note! Main frame section 400 mm higher than wheel recess. 2nd pair of wheel recesses between the axles, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 600 mm, approx. 300 mm deep. Note! Main frame section 300 mm higher than wheel recess. Removable wheel recess covers from the main frame, with wooden inserts. Distance from main frame longitudinal member to outside member approx. 1280 mm (wheel recess area) Extensions extendable to 3,000 mm, foldable at the wheel recess extensions (extensions not in the rear taper nor at the bottom of the wheel recesses) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks centrally on load area or underneath depending on technical feasibility 70 mm timber planks for extension to 3,000 mm Low-bed lashing points Giodei Ri I Njpfx Anfot 1 pair of ring lashing points recessed in the gooseneck, each rated at 5 t 8 pairs of lashing mushrooms recessed in the top and side outer frame, each rated at 10 t 2 x at the front on the gooseneck 6 x in the low-bed – first lashing point 250 mm from the front, last maximum 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each rated at 5 t (can be converted to stake pockets) Drawbar Assembly for Turntable Trailer Drawbar with tested 50 mm towing eye, towing eye inclined at 8° Axles + Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension with lift & lower valve, separately operable at front and rear Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Trailer info center, displays vehicle data (e.g., axle load—not a calibrated scale) and odometer Axle load detection via EBS-Canbus signal, for display in the cab (truck must be pre-equipped, not installed in truck, not a calibrated scale) Vehicle Stability System Duomatic coupling at the front with connecting line to the truck tractor EBS, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 volts, multi-chamber LED lights with resistor, side marker yellow LED lights, LED license plate lights (Note: Certain towing vehicles may show diagnostic errors despite systems working correctly) 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED Additional LED w

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Gisdpfxsi Ri I Ee Anfjt Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Godei Ri Izjpfx Anfsit Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Gsdpoi Ri Ddsfx Anfoit 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Gedpfx Aok Eakvsnfeit Electrical specifications: - 230 V - 0.7 A - 50 Hertz - IP65

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Godpfxolatz Ds Anfoit Electrical data: - 230 V - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Stanje: novo, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, barva: srebrn, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva ploščad, listnate vzmeti, ABS (protiblokirni sistem), možnost razširitve na 3 m, pritrdilne zanke, nakladalne rampe v dveh delih, mehanske rampe, izvlečna vlečna gred, stranska aluminijasta zaščita, dvojne pnevmatike, EBS. Nadgradnja: dolžina nakladalne površine pribl. 8,5 m, možnost razširitve na 3,05 m. Predstavitveno vozilo! Parabolično vzmetenje z izravnavo osi zadaj, 3x 10 t SAF osi, možna dovoljena skupna masa 30 t, po dolžini nastavljiva vlečna gred. Novo vozilo iz zaloge z enodnevno registracijo na proizvajalca! PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane! Gedpfx Ansxbttqofjit

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država izvora: Turčija Cena: 8200 € Leasing rata: 158,26 € Teža koluta: 1250 kg Gisdpfx Anjwirp Ajfjt Maks. zunanji premer koluta: 1300 mm Min. notranji premer koluta: 450 - 550 mm Maks. širina koluta: 400 mm Min. širina koluta: 50 mm Min. širina koluta pri različici s pnevmatsko pritisno roko: 80 mm Motorni pogon Mehansko nastavljivo držalo koluta s 4 čeljustmi Regulacija hitrosti odvijanja ter časa pospeševanja in zaviranja Fotoelektrični bližinski senzor SICK za nadzor upogiba ALTERNATIVE (cene na zahtevo): Različica s pnevmatsko pritisno roko Različica brez pogona, z zavoro, z ali brez pnevmatske pritisne roke

Stanje: novo, Stanje novo Dobavni rok cca. 12 tednov od naročila Država porekla Turčija Cena 11.800 € Leasing obrok 226,56 € Teža koluta 2500 kg Največji zunanji premer koluta 1300 mm Najmanjši notranji premer koluta 450 - 550 mm Največja širina koluta 400 mm Najmanjša širina koluta 50 mm Najmanjša širina koluta pri različici s pnevmatsko pritrdilno roko 80 mm Godpfxowirp Ns Anfoit Motoriziran pogon Mehansko nastavljivo jedro z 4 čeljustmi Regulacija hitrosti odvitja ter časov pospeševanja in upočasnjevanja Fotoelektrični približevalni senzor SICK za kontrolo visečega materiala ALTERNATIVE (CENE NA POVPRAŠEVANJE): Različica s pnevmatsko pritrdilno roko Različica brez pogona, z zavoro, z ali brez pnevmatske pritrdilne roke

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 1500 T 2000-400 Vrtljiva miza (29.844 h) (S&P 3792) Leto izdelave: 2015 Obratovalne ure: 29.844 ur Polž: 40 mm Tlak vbrizgavanja: 2000 bar Volumen giba: 201 cm³ Zapiralna sila: 200 t Razmak med stebri: 1500 mm Gijdpfsy Rqhtsx Anfjt Min. višina orodja: 400 mm Maks. razmik plošč: 700 mm Dimenzije: 4700 x 2100 x 2600 mm Teža: 11.500 kg Priključek: 22 kW Premer mize: 1500 mm, vrtljiva miza z 2 postajama (180°), dvojen izvlek jedra, izpiha naprava, vmesnik za barvni dozirnik, ogrevanje orodja, nova cena cca 250.000 € itd. Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, vpenjalna sila: 400 kN, premer vijaka: 30 mm, injekcijska masa: 79 g, Hydraulic injection molding machine from 2018. The Arburg ALLROUNDER 270 S 400-100 offers a maximum clamping force of 400 kN and screw diameters of 15 mm, 20 mm, or 30 mm. The maximum injection pressure is 2,500 bar for the smaller screws, and the maximum shot weight is 79 g when equipped with the largest screw. If you are looking for high-quality injection molding machines, you should consider the Arburg ALLROUNDER 270 S 400-100, which we have for sale. Contact us for further details. • Tie bar spacing: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm Godpfx Aey Nkwlsnfjit • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic delivery volume: 1,000 l/min per circuit • Heating capacity per control loop: 3.6 kW / 230 V (protected by 16 A) • Drive motor voltage: 380-480 V (50-60 Hz)

Stanje: rabljeno, prevoženi kilometri: 613.000 km, moč: 368 kW (500,34 KM), prva registracija: 03/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 03/2027, zavore: retarder, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, SCANIA S 500 ? RETARDER ? TIPPER HYDRAULICS / WALKING FLOOR HYDRAULICS ? ALCOA ? 2 X DIESEL TANKS ? PARKING AIR CONDITIONING ? FULL FAIRING ? ACC ? ---- VEHICLE HISTORY ? VIDEO AVAILABLE UPON REQUEST ? GERMAN VEHICLE ? FROM FIRST OWNER Giodpfx Ajyzvz Tonfot VEHICLE EQUIPMENT ? AUTOMATIC TRANSMISSION ? RETARDER ? CRUISE CONTROL ? ADAPTIVE CRUISE CONTROL (ACC) ? LANE KEEPING ASSIST ? ACTIVE BRAKING SYSTEM ? ALCOA ALUMINIUM WHEELS ? HILL START ASSIST ? PARKING AIR CONDITIONING ? AUXILIARY HEATER ? REVERSING CAMERA ? NAVIGATION SYSTEM ? ON-BOARD COMPUTER ? LEATHER SEATS ? ALL-LEATHER INTERIOR ? COMFORT SEATS ? SEAT HEATING ? SEAT VENTILATION ? MULTIFUNCTION STEERING WHEEL ? RADIO EQUIPMENT ? REFRIGERATOR (1X) ? ADDITIONAL SHELVES ? DIFFERENTIAL LOCK ? PTO (POWER TAKE-OFF) ? TIPPER HYDRAULICS ? WALKING FLOOR HYDRAULICS ? FULL AIR SUSPENSION ? FULL FAIRING ? 2X FUEL TANKS + 1X HYDRAULIC TANK ? ADDITIONAL LIGHTING FURTHER DETAILS ? MILEAGE: 613,000 KM ? WHEELBASE: 3.85 M ? FRONT TYRE SIZE: 385/65 R22.5 ? REAR TYRE SIZE: 315/70 R22.5 ? WELL-MAINTAINED VEHICLE CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR IMMEDIATE OPERATION ---- EXPORT / NOTE EXPORT SALE ONLY WITH DEPOSIT (MIN. €500 – €2,000) FOR SALES TO EU & NON-EU COUNTRIES, A DEPOSIT OF AT LEAST €500 / €1,000 IS REQUIRED. EXPORT CLEARANCE EXW POSSIBLE IN 10 MIN. (APPROVED EXPORTER). 5, 15, 30 DAY PLATES AS WELL AS 15 DAY AUSTRIAN PLATES AVAILABLE. VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGE, ERRORS AND PRIOR SALE.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, barva: siv, Leto izdelave: 1988, Aeroplex fluidizirano ležišče protitočni mlin 400 AFG Naprava je popolnoma funkcionalna in si jo je mogoče ogledati na kraju samem. Poskusno mletje je mogoče izvesti vnaprej, odvisno od materiala. Leta 2005 je bila naprava posodobljena; takrat je bila nadgrajena na tehtni celici. Električni nadzor: Simatic S7-300 Naprava je sestavljena iz naslednjih enot: 1. Mlin. 2. Enota za polnjenje surovin. 3. Zračni filter. Giedex T Ar Njpfx Anfot 4. Električna stikalna naprava.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, stružna dolžina: 1.585 mm, premer struženja: 760 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 630 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.585 mm, prehod palice: 80 mm, Max. Drehdurchmesser: 760 mm X-Achse: 630 mm Gjdjvgcpvspfx Anfjit Y-Achse: 230 mm Z-Achse: 1.585 mm B-Achse: 225° Spindelbohrung: 80 mm Drehzahlbereich: 6.000 U/min Drehzahlbereich B-Achse: 12.000 U/min B-Achsen-Leistung: 19 kW Länge: 7.000 mm Breite: 2.700 mm Höhe: 2.800 mm Gewicht: 14.500 kg

Stanje: rabljeno, Od € 70,00 zdaj za € 70,00. Zdaj z 10 % popustom. Gisdpfxey R Stks Anfot 1-delna polica 1000 x 400 x 1600 mm – skladiščna polica s 5 po višini nastavljivimi nivoji. Ta enodelna polica je praktična in vsestranska rešitev za shranjevanje blaga v skladiščih, delavnicah, pisarnah in drugih skladiščnih prostorih. Zaradi svoje kompaktne velikosti in

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 20.652 h, skupna višina: 2.380 mm, skupna širina: 1.200 mm, skupna masa: 13.000 kg, največja dolžina izdelka: 6.800 mm, Complete cut-off grinding plant from 2014. This HARALD BAUGMARTEN TM 400 S offers a pressing force of 3500 kN and a cutting speed of approx. 30 mm/s at 500 kN. It features a robust hydraulic system with a total drive power of 30 kW and a machine weight of around 13,000 kg. If you are seeking a high-quality cut-off grinding system, you should consider the HARALD BAUGMARTEN TM 400 S, which we are offering for sale. Contact us for further details. • Press (Holding) • Force: 3500 kN • Stroke: 50 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 3500 kN: approx. 4 mm/s • Return speed: 60 mm/s • Press (Cutting) • Force: 2500 kN • Stroke: 100 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 2500 kN: approx. 5 mm/s • Damping stroke: 20 mm • Drive and Power • Hydraulic pump output: 2 × 15 kW • Total hydraulic drive power: 30 kW • Cooling unit output: 3 kW • Hydraulic power unit output: 3 kW • Pipe connections (Machine to hydraulic unit) • 2 × Ø38 × 4 mm • 2 × Ø30 × 4 mm Gisdpfjyzp Iasx Anfjt • 1 × Ø20 × 3 mm • Mechanical adjustment tolerance: ±5 mm • Operating hours • Hydraulic unit 1: 20,652.8 h • Hydraulic unit 2: 20,641.8 h • Main components of the installation (core machine) • TM 400 S cut-off grinding machine (manufacturer: Sema Systemtechnik) • Four-column press (manufacturer: Winter Pressen) • Hydraulic unit with hydraulic pumps • Control cabinet and operator panel Additional equipment • Automatic bar loader with bundle loading system • Bar breaking unit • Bar rotation drive / measuring station • Weighing station with cut-off sorting • Extraction and filtration system • Acoustic enclosure (HüWa Schallschutz und Anlagenbau) and safety fence

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), širina skobljanja: 400 mm, skupna masa: 1.800 kg, Kalibrirni rezkar / skobeljni stroj za parket Proizvajalec: Ledinek Tip: Rotoles 400 D-S Leto izdelave: 2014 Stroj izhaja iz parketarske manufakture. Delovna širina: 400 mm Delovna višina: 2–150 mm Minimalna dolžina kosa: cca 150 mm Moč debelinskega rotorja: 22 kW Hitrost motorja: 2940 obr/min Podajalna hitrost brezstopenjsko nastavljiva, cca 10–45 m/min, moč motorja cca 3 kW Število obojestranskih nožev: 48 kosov Gijdpfx Aney H Uptsfet Maksimalno odvzemanje materiala: cca 8 mm Skupna priključna moč: cca 26 kW Električna napetost: 3x 400 V, 50 Hz Stisnjen zrak: 6 bar Dimenzije cca: 2000 x 1300 x 2000 mm (DxŠxV) Teža cca: 1800 kg

Stanje: dober (rabljeno), HAUSER S 35-400 je CNC koordinatni brusilni stroj za preciznost, visoko natančnost in zanesljivost. Kapacitete: miza 600×380 mm, X500 Y300, vertikalni voziček 450 mm, razdalja brusilni motor–miza 485 mm, maks. Ø 230 mm (360 s ploščo), izmet 340 mm, konus do 16°. Tehnika: hod brusilnega vretena 1–110 mm brezstopenjsko, podajanje 1–12 m/min, planetno gibanje C 5–250 obr/min, 3×380 V 50 Hz, 10 KM, teža ≈4000 kg, dimenzije 2700×1700×2850 mm. Oprema: hladilno sredstvo, papirni filter, svetilka, MSS, odsesavanje oljne megle, HF-nastavljalnik za CBN, menjavalec orodja 12 EROWA. Primeren za ozke tolerance v avtomobilski, urarski, orodjarni, letalski in medicinski industriji. Gijdpfxsyxn Nds Anfot

Stanje: rabljeno, Leto izdelave: 1995, Material width 400 mm Gisdpfxevuunge Anfot Coil weight 2.0 t Coil inner diameter 480 - 520 mm Coil outer diameter 1500 mm with hydraulic auxiliary drive with spring-actuated disc brake (holding brake), electro-hydraulic release, hydraulic central expansion, pneumatic pressure roller, loop control via contact plate Minimum material width 20 mm

Stanje: rabljeno, Ponudba palet, ki obsega 70 kosov rabljenih zložljivih posod iz plastike s standardnimi merami 600x400 mm po Euronormu in tako primernih za standardizirane logistične uporabe, kot so palete in regali. Posoda s prostornino 30 litrov nudi dovolj prostora za shranjevanje in transport Giedpfxox Ahrqo Anfot

Stanje: rabljeno, Paketna ponudba sestavljena iz 28 euro-normiranih zabojnikov za zlaganje 600 x 400 mm. Vsestranska in trajnostna rešitev za skladiščenje, sortiranje in transport blaga v profesionalnih okoljih. Zaradi standardnih dimenzij Euronorm se ta zabojnik za zlaganje brezhibno vključi v obstoječe logistične sisteme, rolkontejerje, police in Gedpfxoyccx Tj Anfeit