Fliegl Tiefladeanhänger Dts 300 Mit Radmulden nakup rabljenega (22.475)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.900 kg, največja dovoljena obremenitev: 22.100 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prilagojena rešitev za prevoz Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno po želji stranke. #Šasi, prikolica z nizko nosilnostjo Jeklena, varjena konstrukcija Vrtljiv osni vozlič z močnim krogličnim ležajem Zadnja opora, zložljiva Podložne klinice z držalom Bočna zaščita pred trčenjem, aluminijasta Ščitniki proti brizganju zadaj, prek celotne širine Hedpozl Uv Ujfx Aafonp Delne školjke blata pred 1. osjo Razširitve, izvlečne do 3000 mm Predal za lesene deske, na sredini nosilne površine Lesene deske 70 mm za razširitev do 3000 mm 1. par niš za kolesa, potopljenih v nižji del med osmi, nagnjenih za lažji vstop, dolžina spodaj približno 1600 mm, približno 400 mm globoko. Opozorilo! Okvir v območju glavnega nosilca je 400 mm višji od niše za kolesa. 2. par niš za kolesa med osmi, potopljenih v nižji del, nagnjenih za lažji vstop, dolžina spodaj približno 600 mm, približno 300 mm globoko. Opozorilo! Okvir v območju glavnega nosilca je 300 mm višji od niše za kolesa. Razdalja od glavnega okvirja, nosilec do nosilca zunaj, približno 1280 mm (območje niš za kolesa) Pokrov niš za kolesa z jeklenimi vstavki, odstranljiv #Oči za pritrditev, prikolica z nizko nosilnostjo 1 par odprtin za pritrditev na vzdolžnem nosilcu spredaj, potopljenih v dvignjeni del, vsaka do 10 ton. 4 pare lukenj za pritrditev na zunanjem okvirju dvignjenega dela, vsaka do 5 ton 7 parov pritrdilnih elementov zgoraj in na boku, potopljenih v zunanjem okvirju, vsak do 10 ton 1 x spredaj na dvignjenem delu 6 x v nizkem delu Prva pritrdilna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med pritrdilnimi točkami ni večja od 1100 mm Par žepev za podložne klinice, potopljenih v zunanjem okvirju, notranje dimenzije 70 x 40 mm (lahko predelani v 5-tonske obročne pritrdilne točke) Dodatne pritrdilne točke za plošče, vsaka do 10 ton 1 x na dvignjenem delu 1 x v zadnji nagnjenosti, skrajno zadaj, zunaj #Naprava za priklop, prikolica z vrtljivim osnim vozličem Prijemna vilica z odobreno 40 mm prijemno glavo #Osi + vzmetenje SAF osi s kolutno zavoro "Osi/podvozje lasersko izmerjeno" – zmanjšuje obrabo pnevmatik in porabo goriva Zračno vzmetenje z ventilom za dvigovanje in spuščanje #Kolesa in pnevmatike 235 / 75 R 17,5", jeklena platišča v dvojni izvedbi, tovarniška srebrna barva #Zavorna naprava Dvovojna zavorna naprava na stisnjen zrak Zavora za parkiranje s pomnilnikom vzmetne sile Sistem stabilnosti vozila med vožnjo Detekcija obremenitve osi preko signala EBS-Canbus 2 varnostno povezani priključki spredaj, s povezovalnimi cevmi do vlečne enote Parkirne vtičnice za ABS/EBS in zračni priključek na prijemni vilici oziroma vlečni palici 24 voltov EBS, elektronski zavorni sistem z vtičnico EBS spredaj Modul za informacije o prikolici, za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena razdalja in diagnostična/sistemska sporočila #Elektrika 24 voltov, večprostorne luči LED, stranska rumena LED osvetlitev, osvetlitev registrske tablice LED 2 beli pozicijski luči spredaj, LED 2 belo/rdeči luči za ohranjanje voznega pasu zadaj, LED Parkirne vtičnice za elektriko na prijemni vilici oziroma vlečni palici Opozorilni znaki, osvetljeni z LED in izvlečni do 3000 mm #Talna površina Dvignjeni del spredaj s prevleko iz jekla/profilirane pločevine Predal potopljen v nagibni površini proti dvignjenemu delu Nato s približno 70 mm mehke lesene talne obloge, v območju blatnikov jeklena/profilirana pločevina

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 8.400 kg, največja dovoljena obremenitev: 15.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na svoje zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se prilagodita posameznim željam stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Vrtljiva pesta z robustnim kroglastim ležajem Zložljiva zadnja podpora 2 zagozdi za kolesa + nosilec Stranska zaščita iz aluminija Zadnje blatne zavese po celotni širini Četrtinski blatniki pred 1. osjo 1. par vdolbin za kolesa po nižji površini v poglobljenem delu, nagib za vstop, dolžina dna ca. 1600 mm, ca. 400 mm globoko. Opomba! Okvir na osrednjem nosilcu je 400 mm višji kot vdolbina za kolo. 2. par vdolbin za kolesa med osmi v poglobljenem delu, nagib za vstop, dolžina dna ca. 600 mm, ca. 300 mm globoko. Opomba! Okvir na osrednjem nosilcu je 300 mm višji kot vdolbina za kolo. Razširitev izvlečna do 3000 mm (ne vključuje zadnjega nagiba) 70 mm lesene deske za razširitev na 3000 mm Hodpfx Aasi Ri Rvofjnp Pritrdilne točke za nizkopodnega priklopnika 1 par izrezov za pritrditev v vzdolžnem nosilcu spredaj v poglobljenem delu, vsaka 10 t. 4 para pritrdilnih lukenj v zunanjem okviru, vsaka 5 t. 7 parov pritrdilnih gobic zgoraj in ob strani v zunanjem okviru, vsaka 10 t 1x spredaj v poglobljenem delu 6x v poglobljenem delu prva pritrdilna točka 250 mm od spredaj in zadnja maks. 250 mm od zadaj, razmak pritrdilnih točk ne večji kot 1100 mm Vleka priklopnika na vrtljivem podvozju Vlečna kljuka s certificiranim 40 mm vlečnim obročem Osovine in vzmetenje SAF bobnaste zavore Osovine/podvozje lasersko izmerjeni za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z brezvzdrževanjem jekleno-gumijastim ležajem Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca Jeklena platišča v dvojni izvedbi, barvano v srebrno (tovarniško) Zavorni sistem 2-cestni zračni zavorni sistem Vzmeteni parkirni zavorni cilinder 2 varno zamenljiva spojna priključka spredaj, z veznimi cevmi do vlečnega vozila, ABS ter ALB, z ABS priključkom spredaj ter povezovalnim kablom. Pozor: priklopno vozilo sme vleči samo vlečno vozilo, ki omogoča delovanje sistema ABS! Elektrika 24 voltov, večkomorni žarometi, stranska rumena LED osvetlitev, 2 sprednji beli pozicijski luči 2 beli/rdeči luči za označevanje sledi zadaj 2 x 7-polna varno zamenljiva vtiča spredaj z veznim kablom, 1 LED rotacijska luč z nosilcem, upravljana preko pozicijske luči (luč odstranljiva) 2 para opozorilnih tabel, dvojno LED osvetljenih, izvlečenih do 3000mm Pod Sprednji poglobljen del s premazom iz jekla/rebraste pločevine Shranjevalni zaboj v nagibu proti poglobljenemu delu, nato s 70 mm mehkolesom, na območju kolesnih vdolbin jeklen/rebrast premaz Zadnji nagib s 70 mm mehkolesom Nizkopodno nakladalno površino vklj. z zadnjim nagibom 6500 mm Ramps Jeklene rampe, dolžine 2800 mm, širine 750 mm, stransko premične z leseno oblogo z dvižno pomočjo s vzmetjo Navodila za uporabo Pri osni obremenitvi 10.000 kg je potrebno posebno dovoljenje, možno le za nedeljeno blago! Navedena skupna masa je tehnično možna, glede na vrsto tovora pa skupna masa morda ne bo dosežena v skladu z dovoljenimi osnimi, podpornimi in priklopnimi obremenitvami. (Slabe vozne in sledilne lastnosti zaradi nepravilne razporeditve tovora možno!) Država registracije/tablice Država registracije: Nemčija z Dekra pregledom in poročilom (po §13 EG - FGV)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33001012559, lastna masa: 6.250 kg, največja dovoljena obremenitev: 17.750 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.620 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.890 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: črn, Chassis Low-bed Trailer: Steel welded construction, turntable with robust ball-bearing slewing ring, foldable rear support, 2 wheel chocks with holder, aluminum side underrun protection, splash guards at the rear across the full width (not compatible with forklift mounting), half-shell mudguards, 1st axle with anti-spray splash guards, anti-spray splash guards behind 2nd and 3rd axles, 1 plastic toolbox with shelving, W=620/H=360/D=440 mm, lockable with padlock, width extensions retractable to 3,000 mm, storage compartment for timber planks in the middle of the load bed, 70 mm timber planks for extension to 3,000 mm, lashing eyes for low-loader, 1 pair of lashing cutouts in the longitudinal beam at the front on the gooseneck recessed (each 10 t.), 4 pairs of lashing holes in the outer frame (each 5 t. load securing strap hooks), 7 pairs of lashing mushrooms, recessed at the top and sides of the outer frame (each 10 t.), 1x front on gooseneck, 6x in well-bed, first lashing eye 250 mm from the front and last a max. of 250 mm from the rear, spacing of the lashing eyes no greater than 1100 mm, 5 pairs of ring lashing eyes recessed in the outer frame (each 5 t., convertible to stake pockets), 2 pairs of additional folding lashing eyes (each 10 t.), 1x on gooseneck (protruding), 1x recessed in the floor behind the last axle, 1 pair of screw-in lashing eyes (each 6.7 t., JDT), with large flange plate incl. thread as counter-holder, at the front on gooseneck. Towing attachment for turntable trailer: drawbar with certified 40 mm towing eye, parking sockets for electrics/ABS and air connections on the drawbar. Axles & Suspension: SAF drum brake axles, 'axle/chassis laser alignment' for reduction of tire wear and fuel consumption, air suspension with raising & lowering valve, controllable separately for front and rear. Wheels and Tires: 235/75 R17.5" Fulda, rims: 6 x steel rims mounted inside in twin arrangement; 6 x polished aluminum rims mounted outside. Brake system: 2-line compressed air brake system, spring-loaded parking brake, trailer info center to display vehicle data such as axle load (not certified scales) and odometer, vehicle driving stability system, axle load detection via EBS CAN bus signal for display on truck cab screen (truck must be suitably pre-equipped), 2 fail-safe coupling heads at front with connecting lines to tractor unit, EBS, electronic braking system with EBS plug at front including connection cable. Electrics: 24 Volt, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED, make: Aspöck EcoLED 2 with dynamic indicator premium LED side marker lights, 2 front white position lights in LED, 2 rear white/red lane control lights in LED, 2 x 7-pin fail-safe plugs at the front with connection cable, additional LED work light at rear, 1 LED rotating beacon with bracket, switched via parking light, 2 pairs of LED-illuminated warning signs, extendable to 3,000 mm. Hjdpfxezaznzj Aafonp Floor: front gooseneck section with steel/chequer plate covering, tool box recessed in the ramped transition to gooseneck, then with 70 mm Siberian larch wood flooring, wheel arch area with steel/chequer plate surface, rear ramp with 70 mm larch wood flooring, low-bed area including rear ramp 6,500 mm, drive-on ramps: steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, additional ramp securing bracket, foldable underneath (for lateral anti-slip - not in combination with hydraulic lateral ramp shift), with wood overlay, spring

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 15.600 kg, največja dovoljena obremenitev: 8.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Dodatne informacije Podvozje Jeklena varjena konstrukcija 1. par kolesnih ugreznin je v območju voznega hodnika vgrajen v jekleno platformo, z naklonom za vstop, dolžina spodaj približno 1400 mm, globina približno 400 mm. Okvir je v območju glavnega nosilca 400 mm višji od ugreznine za kolesa. Če naj se prevažajo stroji, pri katerih je treba preveriti skupno višino, prosimo za tehnični podatkovni list tipov strojev z natančnimi podatki (če je skupna višina presežena -> tveganje stranke, potrebno dovoljenje), (odvisno od oddaljenosti tal pod stroji so na strani stranke potrebni vložki v kolesne ugreznine). Vlečna plošča s trdnim ležajem s kroglami, zaboj vgrajen v prednji del vlečne plošče Zadnje opore zložljive 2 podložni zagozdi z nosilci Bočna zaščita iz aluminija Zadnja zaščita proti škropljenju po celotni širini Razširitve izvlečne na 3000 mm (ne v zadnjem poševnem delu) (Širina osi gradbenih strojev oz. vozil, ki se prevažajo, ne sme presegati zunanje širine okvirja 2.550 mm) Shranjevalni prostor za lesene deske na sredini nakladalne površine Lesene deske 70 mm za razširitev na 3000 mm Vezalne točke nizkoploščadnega priklopnika 110 3 para vezalnih točk po 10 t spredaj integriranih v podlago vklj. 6 parov vezalnih gobic vgrajenih zgoraj in ob strani v zunanjem okvirju po 10 t 1 x v območju vratu ostali razporejeni vmes, razdalja ne večja od 1200 mm 1 x zadnji poševni del 5 parov žepov za kole v zunanjem okvirju, notranje mere 70 x 40 mm, (možnost predelave v 5 t. obročne vezalne točke, niso del dobave) Hnjdpfji Ri Rysx Aafsp Vlečni sklop prikolice z vlečno ploščo Vlečna roka s preizkušenim vlečnim obročem 40 mm Preme in vzmetenje SAF bobnaste zavore Premi/podvozje lasersko izmerjeno, zmanjša obrabo pnevmatik in porabo goriva Parabolično vzmetenje z vzdrževanjem prostim jekleno-gumijastim ležajem Zavorni sistem Dvocevni zračno-tlačni zavorni sistem Barvno označene cevi za lažje servisiranje. Vzmetna parkirna zavora 2 priključni glavi spredaj, s povezovalnimi cevmi do vlečnega vozila, ABS in ALB, s priključkom ABS spredaj, s povezovalnim kablom, Pozor: Prikolico lahko vlečejo le vozila, ki zagotavljajo delovanje ABS! Kolesa & pnevmatike 235/75R17,5 po izbiri proizvajalca Jeklena platišča v dvojni postavitvi, tovarniško srebrna Elektrika 24 voltov, večkomorni žarometi, bočna rumena LED razsvetljava 2 bela pozicijska žarometa spredaj 2 belo/rdeča žarometa za ohranitev smeri zadaj 2 x 7-polni priključni vtič spredaj, s povezovalnim kablom, 1 LED rotacijska luč z nosilcem, stikalo prek pozicijske razsvetljave (luč snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljene in izvlečne do 3000 mm Tla Sprednji del jeklena tla, vklj. nato tla iz mehkega lesa 70 mm, v območju kolesnih ohišij jeklena/rebrasta pločevina Zadnji poševni del s 70 mm mehkolesnim dnom Nizka nakladalna površina z zadnjim poševnim delom 8.200 mm Nakladalne rampe Jeklene rampe 2.800 mm dolge, 750 mm široke, bočno pomične s premazom iz lesa s pomočjo za dvig s vzmetjo Navodila za uporabo Pri obremenitvi osi 10.000 kg je potrebno posebno dovoljenje, dovoljeno le za nedeljivo blago! Navedena skupna masa je tehnično možna, odvisno od tovora skupna masa ob upoštevanju dovoljene osi/teže podpore in teže priklopnika morda ne bo dosežena. Država registracije/tablice Država registracije: Nemčija vklj. s preizkusom in poročilom Dekra (v skladu s §13 EG - FGV) 24/7 servisna telefonska številka pripravljeno za dvovrstno nosilko registrske tablice Označevanje obrisa z reflektirnimi trakovi v skladu z ECE

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! Hjdpjzl Txnefx Aafjnp More details: !

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.740 kg, največja dovoljena obremenitev: 14.260 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 9.430 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: originalen, Prilagojena rešitev za transport Konfigurirajte svoje vozilo Fliegl po vaših zahtevah. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvajata individualno, po željah stranke. #Šasi, prikolica z nizko nosilnostjo Jeklena varjena konstrukcija Vrtljiva plošča z robustnim krogličnim ležajem, integriran predal v vrtljivi plošči Zložljivo zadnje podlago Klini za podpiranje z nosilcem Stranski zaščitni elementi iz aluminija Ščitniki proti brizganju zadaj, po celotni širini Polovične blagovne pločevine za prvo os z zaščitnimi ploščicami proti brizganju, zaščitne ploščice proti brizganju za drugo os Nosilec za rezervno kolo za 1 rezervno kolo, z kompletom za pritrditev kolesa Rezervno kolo, proizvajalec enak osnovni pnevmatiki, jekleno platišče Plastična orodjarna škatla, z vložkom, š=620/v=360/g=440 mm, zaklenljiva z obeskom (običajna ključavnica ni vključena). Ojačitve za pritrditev tovora na prikolici z nizko nosilnostjo 3 pari pritrdilnih točk, vsaka s kapaciteto 10 ton, integrirane v pod, spredaj 5 parov pritrdilnih elementov zgoraj in na straneh, integriranih v zunanji okvir, vsak s kapaciteto 10 ton 1 pritrdilna točka na zadnjem delu, razporeditev ostalih na enakomerni razdalji, največ 1200 mm Prsteni za pritrditev tovora, integrirani v zunanji okvir, vsak s kapaciteto 5 ton (namesto nosilcev) #Naprava za priklop, vrtljiva plošča prikolice Povezovalna vilica z odobreno in nagnjeno 40 mm priklopno glavo, z 8° nagnjeno priklopno glavo Hedpfx Aozl R S Seafsnp #Osi + vzmetenje SAF osi z bobnovimi zavorami „Laserjev meritev osi/podvozja“ – zmanjšanje obrabe pnevmatik in porabe goriva Parabolična vzmetenje z vzdrževalno brezplačnim jekleno-gumijastim ležajem #Kolesa in pnevmatike 235 / 75 R 17,5" Jeklena platišča v dvojni konfiguraciji, barva srebrna #Zavorni sistem Zavora na stisnjen zrak z dvema cevoma Parkirna zavora s pomnilnikom vzmeti 2 varno priključni spojni elementi spredaj, s povezovalnimi cevmi do vlečnega vozila ABS in ALB, z ABS priključkom spredaj, s povezovalnim kablom Opozorilo: Prikolico lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! #Elektrika 24 voltov, večkomorne luči, stranska rumena LED osvetlitev 2 bele/rdeče luči za označevanje stranske silhuete zadaj 2 bele pozicijske luči spredaj 2 x 7-polni varno priključni vtiči spredaj, s povezovalnim kablom #Pod Sprednji del: jeklena pločevina, nato 70 mm debela mehka lesena pločevina, na območju blatnikov jeklena/profilirana pločevina Zadnji nagnjeni del s 70 mm debelo mehko leseno pločevino Površina prikolice z nizko nosilnostjo, vključno z zadnjim nagnjenim delom: 7200 mm #Rampe za natovarjanje Jeklene rampe, dolge 2800 mm, široke 750 mm, stransko pomične Dodatno varovanje rampe, zložljivo navzdol (preprečuje stransko drsenje rampe, ne v povezavi s stranskim hidravličnim premikanjem rampe) Prevlečene z lesom Podprte s vzmetenim dvižnikom #Navodila za uporabo Za 10.000 kg obremenitve osi je potrebno posebno dovoljenje. Dovoljenje je treba zaprositi v vsaki zvezni državi posebej, odobritev za 20 ton bruto teže pa zakonodajalec ne bo nujno odobril. Tveganje nosi stranka. Navedena skupna masa je tehnično možna, vendar se lahko, odvisno od tovora, dejanska skupna masa ne doseže, če upoštevate dovoljeno obremenitev osi/podpore in sedla. #Odobritev / tablice Država odobritve: Nemčija Preizkusna odobritev po EG 2007/46 24-urna servisna služba pripravljeno za držalo za registrske tablice, dvovrstično Označevanje konture z refleksijskim trakom po ECE R 048, stransko belo in zad

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Hnodpoi Ri Ddofx Aafsp Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Hsdpfx Aoi Ri Dloafsnp Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 11.070 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Šasija Jeklena varjena konstrukcija Hjdpfx Aji Riwfjafsnp Vrtljiva plošča z močnim krogličnim obročem Zložljivo zadnje podporno stojalo 2 zagozdi za kolesa z nosilcem Stranska zaščita proti spodrsljaju iz aluminija Zadnje blatnike čez celotno širino Polovični blatnik na 1. osi z antisperjnimi zavesicami, antisperjne zavesice za drugo in tretjo os 1 plastična orodjarna škatla, z vložno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm (ne v zadnji poševnini) Sredinsko skladišče za lesene deske na tovorni površini Lesene deske 70 mm za razširitev na 3.000 mm Pritrdilne zanke za nizkopodni priklopnik 1 par vdelanih pritrdilnih zank spredaj na vratih, po 5 ton 7 parov vdelanih pritrdilnih gobic zgoraj in ob strani v zunanji okvir, po 10 ton 1 x spredaj pri vratih 6 x v nizkem dnu prva pritrdilna zanka 250 mm od spredaj, zadnja max. 250 mm od zadaj, razmak ne več kot 1100 mm 5 parov žepov za kol znotraj zunanjega okvirja, notranje mere 70 x 40 mm, lahko se predelajo v 5 t. okrogle pritrdilne zanke (niso vključene v obseg dobave) 2 dodatna para zložljivih pritrdilnih zank, po 10 ton 1 x spredaj na vratih (izstopa) 1 x za zadnjo osjo, vgrajena v tla Priključna oprema za priklopnik z vrtljivo ploščo Vlečna roka s preizkušenim 40 mm vlečnim obročem Osi in vzmetenje SAF bobnaste zavore Meritev osi/podvozja z laserjem za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z vzdrževanjem prostim jeklo-gumijastim ležiščem in mehanskim uravnavanjem osne obremenitve (nihanje) Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca z oznako M&S Jeklena platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvovodni zračno zaviralni sistem Vzmetni zavorni zasilni sistem 2 varno izmenljivi priklopni glavi spredaj z povezovalnimi cevmi do vlečnega vozila ABS in ALB, z ABS vtičem spredaj in povezovalnim kablom Znamka: Wabco ali Knorr Pozor: Priklopno vozilo lahko vlečejo samo vozila, ki zagotavljajo delovanje ABS! Elektrika 24V, večkomorni žarometi, bočna rumena LED osvetlitev 2 bela pozicijska svetilnika spredaj 2 bela/rdeča stranska označevalnika zadaj 2 x 7-polni varno izmenljivi vtični konektor spredaj, z povezovalnim kablom 1 LED rotacijska luč z nosilcem, vklop preko pozicijskih luči (luč snemljiva) 2 para opozorilnih tabel, dvojnih, LED osvetljenih, izvlečnih do 3.000 mm Tla Spredaj z jeklenim/reliefnim pločevinastim premazom Shranjevalni zaboj v poševnini vdelan v tla Nato s 70 mm mehkim lesenim podom, na področju blatnikov jeklen/reliefni pločevinasti premaz Zadnja poševnina s 70 mm mehkim lesenim podom Nizka nakladalna površina skupaj z zadnjo poševnino: 6.500 mm Nakladalne rampe Jeklene rampe 2.800 mm dolge, 750 mm široke, bočno pomične Dodatno zložljivo zavarovanje ramp spodaj (za zaščito pred bočnim premikom ramp; ni v kombinaciji s hidravličnim bočnim premikom ramp) Obložene z lesom S pomočjo vzmetnega dvigalnika Navodila za uporabo Pri osni obremenitvi 10.000 kg je potrebna posebna dovolilnica, možno samo za nedeljive tovore! Navedena skupna masa je tehnično možna – glede na tovor skupna masa ob upoštevanju dovoljene osne, podporne in sedalne obremenitve morda ne bo dosežena. Država registracije/tablice Država registracije: Nemčija Preizkušeno in odobreno v skladu z EG 2007/46 24/7 servisna linija

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, skupna dolžina: 11.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta izvedeni individualno glede na želje stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Obračalna plošča z močnim krogelnim ležajem, skladiščna škatla vgrajena v prednjo konstrukcijo obračalne plošče Zadnja opora zložljiva 2 zagozdi z nosilcem Stranska zaščita iz aluminija Zadnji blatniki po celotni širini Razširitve izvlečne do 3.000 mm (ne v zadnjem poševnem delu) Skladiščni prostor za lesene deske na sredini tovorne površine Lesene deske 70 mm za razširitev na 3.000 mm Pritrdilni obroči za nizko prikolico Hjdpfsi Riy Ejx Aafonp 3 pari pritrdilnih točk, vsaka do 10 t, vgrajene spredaj v dno 6 parov pritrdilnih gobic vgrajenih zgoraj in ob straneh v zunanji okvir, vsaka do 10 t 1x v predelu vratu ostale razporejene vmes, razdalja največ 1.200 mm 1x v zadnjem poševnem delu 5 parov žepov za stebre v zunanjem okviru, notranje mere 70 x 40 mm (prilagodljivo za 5 t prstanaste pritrdilne obroče, ni vključen v obseg dobave) Vlečna naprava prikolice z obračalno ploščo Vlečna gred s certificirano 40 mm vlečno ušico Premi in vzmetenje SAF bobnaste zavore Premi/podvozje izmerjeno z laserjem – zmanjšana obraba pnevmatik in poraba goriva Parabolično vzmetenje z vzdrževanjem prostimi jeklenimi in gumijastimi ležaji ter mehanski izravnalec osi (gugalnica) Zavorni sistem Dvovodna pneumatska zavorna instalacija Barvno označene cevi za enostavno servisiranje Parkirna zavora z vzmetjo vključena 2 varni spojki spredaj, s povezovalnimi cevmi do vlečnega vozila, ABS in ALB, s sprednjim ABS vtičem in spojnim kablom Opozorilo: Priklopno vozilo sme vleči le vlečno vozilo, ki zagotavlja delovanje ABS! Kolesa in pnevmatike 235 / 75 R 17,5 po izbiri proizvajalca Jeklena platišča v dvojni postavitvi, tovarniško srebrna Elektrika 24 voltov, večkomorni žarometi, stranske rumene LED luči 2 bela pozicijska žarometa spredaj 2 bela/rdeča markerja zadaj 2x 7-polni varni vtičnik spredaj, s povezovalnim kablom 1 LED rotacijska luč z nosilcem, upravljana preko parkirne osvetlitve (luč snemljiva) 2 para opozorilnih tabel, LED osvetljene in izvlečne do 3.000 mm Tla Sprednji del - jeklena tla, nato 70 mm mehka lesena tla, v območju koles jekleni/rečnati pločevinasti premaz Zadnji poševni del s 70 mm mehko leseno površino Nizkoprethodna površina skupaj z zadnjim poševnim delom dolžine 8.200 mm Vozne rampe Jeklene rampe dolge 2.800 mm, široke 750 mm, bočno pomične premazane z lesom vključeno podprte s pomočjo vzmeti Navodila za uporabo Pri 10.000 kg osni obremenitvi je potrebna izjemna odobritev, možno le za nerazdeljivo tovor!!! Navedena skupna teža je tehnično možna; odvisno od tovora skupna teža v skladu z dovoljenimi osnimi/torznimi/dvokolesnimi obremenitvami morda ne bo dosegljiva. Država registracije/tablice Država registracije: Nemčija z Dekra pregledom in poročilom (po §13 EG - FGV) 24/7 servisna linija pripravljeno za dvovrstni nosilec tablice Označitev oblike s reflektivnimi trakovi po ECE R 048, stransko belo in zadaj rdeče Barvanje Okvir DB 7350 novosiva 10 let garancije proti rjavenju Vlečna gred pocinkana ali črna, po izbiri proizvajalca Vozne rampe vroče pocinkane Pozor: Arhivske slike! Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta izvedeni individualno glede na želje stranke.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Hnedsi Ri Hropfx Aafop Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 Hsdpfx Aaei Ri Hcsfjnp to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna širina: 25.500 mm, skupna višina: 35.000 mm, Leto izdelave: 2018, Oprema: ABS, = More options and equipment = - Rear air suspension - Front air suspension Hedpsy Svrgjfx Aafonp = Notes = For inquiries about the vehicle, Mr. Seidel (by phone) will be happy to assist you. Fliegl DTS 300 low-bed trailer BPW axles, drum brakes, spring-loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading dimensions: L 8,490 mm W 2,510 mm, tire tread: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg GVW: 24,000 kg Please contact Tobias Ebert for more information.

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (WxDxH): 1500 x 3000 x 2000 mm - External dimensions (WxDxH): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each Hnodpfx Aolkb Ezeafjp Another 100 programs can be stored/loaded via FTP or USB flash drive - 2 pcs. circulating air fans - Double door with safety door sensors - Overtemperature protection, Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motor-driven dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Loading tracks, recess for wheeled loading trolley - Documentation, CE declaration of conformity - Electrical circuit diagram with spare parts list Transportation, installation, and staff training can be offered upon request. This new unit is also available with exhaust air fan and other configurations! Delivery time approx. 10–12 weeks. Contact us! We offer new and used industrial furnaces, which we can also modify and retrofit according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber oven, heating oven, chamber recirculating oven, annealing oven, tempering oven.

Stanje: rabljeno, največja dovoljena obremenitev: 28.560 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 12.032 mm, širina tovornega prostora: 2.352 mm, višina nakladalnega prostora: 2.698 mm, prostornina tovornega prostora: 68 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, FLIEGL 3-axle fixed container chassis with 40 FT high-cube container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis unladen weight: 3,640 kg High-cube container unladen weight: 5,800 kg SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE with start-up aid with vehicle driving stability system Axle load detection Hnodpfjvzk Najx Aafep Tyres: 6 x 385/55 R 22.5 40 FT high-cube container, right side wall with multiple wing doors (can be opened), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 m³ 25 Euro pallets Accessible with pallet truck and forklift Condition: grade 1-A RENTING is the new BUYING – also available from us as a full-service rental.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.900 kg, največja dovoljena obremenitev: 16.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.625 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni individualnim željam kupca. Dodatne informacije Podvozje Jeklena varjena konstrukcija Vrtljiva plošča z močnim krogličnim ležajem Zadnja podpora zložljiva 2 zagozdi s pritrditvijo Zadnje blatne zavese po celotni širini Priprava za širitev na 3.000 mm (luknje v zunanjem okviru, ne v zadnji poševnini) Privezne ušesca za nizkoposteljni priklopnik 1 par priveznih izrezov spredaj na upognjenem vzdolžniku, vsak po 10 t 7 parov priveznih gumbov zgoraj in ob strani v zunanjem okviru, vsak po 10 t 1x spredaj na upognjeni 5x na nizkopostelji 1x na zadnji poševnini 12 parov priveznih lukenj v zunanjem okviru, vsaka po 5 t (za pritrdilne pasove) 5x upognjeni, 6x nizkopostelja in 1x zadnja poševnina Vlečni priklop za prikolico z vrtljivo ploščo Vlečna roka s preverjenim vlečnim obročem 40 mm Osovine in vzmetenje Bobnaste zavore, po izbiri proizvajalca Podvozje/osi lasersko izmerjene – zmanjšuje obrabo pnevmatik in porabo goriva Parabolično vzmetenje z brezvzdrževalnimi jekleno-gumijastimi ležaji in mehansko izravnavo osne obremenitve (gugalna izravnava) Kolesa in pnevmatike 235 / 75 R 17,5 Fulda Jekleni platišči v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvocevni zračni zavorni sistem Vzmetno parkirno zavoro 2 varno izmenljivi spojni glavi spredaj z povezovalnimi cevmi do vlečnega vozila, Povezovalne cevi podaljšane za cca. 60 cm Brez ABS, vendar z mehanskim ALB, največja dovoljena hitrost 60 km/h Elektrika 12 V, večkomorni žarometi, brez bočne rumene LED osvetlitve, bočna odbojna stekla 2 beli pozicijski luči spredaj 2 belo/rdeči luči za označevanje sledi zadaj 1x 7-polni 12V vtikač spredaj, s povezovalnim kablom, podaljšanim za cca. 60 cm 1 LED rotacijska luč z nosilcem, stikalo preko parkirne luči (svetilka snemljiva) 2 para osvetljenih in izvlečnih opozorilnih tabel do 3.000 mm Tla Sprednja upognjena površina prevlečena z jekleno/reliefno pločevino Shranjevalni predal v poševnini proti upognjeni površini Nato 70 mm mehka lesena tla, na področju kolesnih niš jeklena/reliefna pločevina Zadnja poševnina s 70 mm mehkim lesom Nizkoposteljna površina vključno z zadnjo poševnino 5.900 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, stransko pomične s lesenim vložkom s pomožnim vzmetnim dvigalom Obratovalna navodila Pri osni obremenitvi 10.000 kg je potrebna posebna dovoljenje, dovoljeni so le nedeljivi tovori! Naveden skupna masa je tehnično mogoča, odvisno od tovora se skupna masa ob upoštevanju dovoljene osne/podporne in sedalne obremenitve morda ne doseže. (Možno slabo vožnjo in sledenje zaradi nepravilne razporeditve tovora) Država registracije / tablice Država registracije: Nemčija Hodpsi Ri Agefx Aafenp z Dekra pregledom in poročilom za največ 60 km/h, vlečno vozilo LoF (za Švico največ 40 km/h) pripravljeno za dvovrstični nosilec tablic brez obrisnih/odsevnih trakov skladno z ECE R 048 Barva Okvir DB 7350 Novasiva 10 let garancije proti rjavenju Vlečna roka pocinkana ali črna, po izbiri proizvajalca Nakladalne rampe vroče cinkane Pozor: Arhivske slike! Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni individualnim željam kupca.

Stanje: rabljeno, lastna masa: 9.980 kg, največja dovoljena obremenitev: 30.020 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, dolžina tovornega prostora: 10.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 4-osno, SAF osi, vrtljiva plošča, zračno vzmetenje, ABS (protiblokirni sistem), možno razširitev na 3 m, pritrdilne ušice, dvodelne nakladalne rampe, hidravlične rampe, stranska aluminijasta zaščita proti vdoru, dvojne pnevmatike, kolesne vdolbine. Nadgradnja: 4-osna nizkopodna prikolica s kolesnimi vdolbinami, izrezom za bagerski izpust in hidravličnimi rampami. Skoraj novo! 4x 10 t SAF-os, bobnaste zavore, tehnična skupna masa 40000 kg, nakladalna dolžina zamika približno 2800 mm, nakladalna dolžina nizkopodne platforme približno 7400 mm, možnost razširitve na 3000 mm, 50 mm vlečna zanka, 1. par kolesnih vdolbin približno 1600 mm dolg, 2. par kolesnih vdolbin približno 600 mm dolg, dolžina ramp približno 3850 mm, rampe vroče cinkane, rampe hidravlično bočno pomične. Višina nakladanja v sprednjem kolesnem vdolbini približno 560 mm! Višina nakladanja v zadnjem kolesnem vdolbini približno 650 mm! Dodatki brez garancije, pridržujemo si pravico do sprememb, predhodne prodaje in napak! Hnedpfx Aozg Ev Ujafjp

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 16 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Control: Eurotherm Nanodac Hnjdpfjv Hg Eujx Aafep Controller/recorder with color touch display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in empty oven - Documentation, CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated, but only covered with stainless steel sheet. This allows unrestricted entry for all track gauges. Alternatively, the floor can be offered insulated (with entry rails to be specified by the customer). We offer new and used industrial furnaces, which we can also modify and customize to customer requirements. Oven, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, aging oven.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.950 kg, največja dovoljena obremenitev: 23.050 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 9.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje stranke. Šasija prikolice s centralno osjo, gradbena izvedba Varjena konstrukcija iz drobnozrnatega jekla Prednji oporni nogi na menjalniku Hidravlična zadnja podpora Zagozde za kolesa z nosilcem Hnsdpfx Aaszcv D Nsfep Stranska zaščita iz aluminija brez zaščite proti podvozu Zadnji blatniki čez celotno širino Blatniki pred vsako osjo in antispray-blatniki za vsako osjo Plastična orodjarna, z vmesno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm Sredinsko skladišče za lesene deske + lesene deske 70 mm za razširitev na 3.000 mm Privezne točke za nizkonosečo prikolico Vgrajeni obročasti d-vlečni nosilci v zunanjem okviru, vsak 5 t (možnost predelave v cevi za količke) Privezne gobice zgoraj in ob strani v zunanjem okviru, vsak 10 t Vleka centralnoose prikolice Vlečna roka s preizkušeno 50 mm vlečno zanko Osovine in vzmetenje Bobnaste zavore "Lasersko merjene osi/podvozje" - za zmanjšano obrabo pnevmatik in nižjo porabo goriva Zadnja os krmiljena, z avtomatsko blokado pri vzvratni vožnji prek vzvratnega svetila, dodatna blokada na vozilu prek ročnega gumba Zračno vzmetenje 1. os samodejno dvižna os, dodatno ročno spustljiva, upravljanje prek gumba na vozilu Dvig osi pod priporočeno vozno višino, zato ni jamstva za poškodbe pnevmatik Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Parkirno zavora z vzmetjo 2 nezamenljivi priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila EBS, Elektronski zavorni sistem z EBS priključkom spredaj, vključno s povezovalnim kablom Opozorilo: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS! Z dvigalno/spustnim ventilom Višina vozila v kombinaciji z dvižno osjo: ko je os dvignjena, se višina nakladalne oziroma skupne višine poveča za 50 mm Sistem za stabilnost vozila Trailer Infocenter za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena kilometrina in diagnostična/sporočilna sporočila sistema Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini voznika Kolesa in pnevmatike 235/75 R17,5, znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Električni sistem 24 voltov, večkomorni LED žarometi z uporom, stranske rumene LED luči, osvetlitev registrskih tablic v LED 2 bele pozicijske LED luči spredaj 2 bela/rdeča LED luči za ohranjanje pasu zadaj 2 x 7-polni izmenljivo varni vtiči spredaj s povezovalnim kablom Dodatni LED delovni reflektorji na zadku LED rotacijska luč z nosilcem Opozorilne table osvetljene z LED, izvlečne do 3.000 mm Tla potem 70 mm pod iz mehkega lesa, na območju blatnikov jeklena/rebrasta pločevina Zadnja zaokrožitev s 70 mm mehke lesene talne obloge Nizko nakladalna površina z zadnjo zaokrožitvijo 7.500 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno premične preoblečene z lesom Hidravlično prek stranskega izhoda pogonskega vozila z dušilko, upravljanje stransko na levi spredaj Hidravlično bočno premikanje nakladalnih ramp, možnost individualnega upravljanja Hidravlična povezava s SVK vtičem NW 10/3, vključno s povezovalno cevjo Rešitev za prevoz po meri

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.100 kg, največja dovoljena obremenitev: 34.900 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mounts: 1 x 20-foot container central (or swap body container 7.15 / 7.45 m), fixed at the front, container lock twistlocks in extended version 24 t 2-speed landing gear, single-sided operation with anti-spray mudflaps according to EC standards Stainless steel drip tray with 1 1/4" drain pipe + 1 1/4" shut-off valve, incl. drip plate, perforated tread plates approx. 400 mm wide, left & right between drip tray and main longitudinal beam 4 hose racks approx. 4,500 mm long (hose box) for hose tubes: 2 x DN 200 outside + 2 x DN 160 centred, rear hose box (stainless steel) 300 mm deep, splash water protected, lid (stainless steel) all-round rubber seal, drainage hole at lowest point, then without lid on hose tubes 1 stainless steel grounding lug at the rear right side of the frame, with international grounding sticker on the frame Access steps right rear on underrun guard, rear right outside on main beam with tread plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment: reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension Hnedpfx Asi Rixkeafop 1st axle automatic lift axle, incl. forced lowering and start assist, operated by 3x brake activation Braking System 2-line air brake system Colour-coded pneumatic lines for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: Trailer must only be towed by tractors that ensure ABS functionality! With lift & lower valve Vehicle stability control system Axle load recognition via EBS CAN-bus signal, for display in cab (truck must be pre-equipped), not calibrated as a weigh scale Wheels and Tyres 385/65 R22.5, manufacturer as per supplier’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red marker lights at rear 1 x 15-pin socket at front, without connection cable Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight within the permissible axle/support/kingpin loads may not be achievable (poor driving and trailing performance may result from incorrect load distribution) This vehicle may only be loaded with 20’ tank containers complying with ISO 668 and especially ISO 1496-3! Tank containers must have 'end-load-transfer areas' (end transverse beam load transfer areas)! Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate to ECE 70 Inspection according to ADR sec. 9.1.1.2, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3), with warning panel at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Conspicuity marking with reflective tape

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.070 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 990 mm, skupna dolžina: 13.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized individually to customer specifications. Chassis: Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot container flush with rear Center telescopic 1st stage, rear extension extended 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Center telescopic 2nd stage, rear extension extended 2nd stage: 1 x 45-foot with gooseneck tunnel and overhanging to the rear Center telescopic 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45-foot with long gooseneck tunnel and chamfered corners Center telescopic as interlocking central tube frame with bolt locking With rear height adjustment and foldable intermediate supports for containers without tunnels Container guide at the front, plug-in and detachable Plug adapter for front locking, for securing containers without tunnel from below, with holder for when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-sided operation Extendable underrun protection for 45-foot container Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser measured to reduce tire wear and fuel consumption Staggered axle spacing mm (intermodal operation) up to 44 t gross combination weight Air suspension 1st axle with automatic lift axle, including forced lowering and start-up aid, activated by braking 3 times (start-up aid functional up to 30% axle overload and a maximum speed of 25 km/h) Brake System 2-line compressed air brake system, color-coded pipeline layout for easy service. Spring-actuated parking brake Tele Control Axle relief for easy telescoping 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connecting cable Important: The trailer may only be towed by tractors that ensure effective ABS! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, display in the driver’s cab (truck must be pre-equipped accordingly, no truck installation; not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake light in LED, side yellow LED lighting (Note! With certain towing vehicles, malfunction indications may occur despite correct operation) 2 white position lamps at front 2 white/red lane marker lamps at rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Operating Notes When transporting 45-foot containers with a short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16,500 mm is exceeded! The underrun protection must be manually extended! An exemption approval according to § 70 StVZo is required! Country of Registration / Plates Germany Hsdji Ri R Sopfx Aafjnp Approval according to EC 2007/46 24/7 Service Hotline Tailored Transport Solution

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.800 kg, največja dovoljena obremenitev: 28.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, skupna višina: 2.645 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized to individual customer specifications. Chassis - Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, mounting positions for warning signs at the rear, outer frame with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, single-sided operation, ferry lugs marked in yellow (two at the rear as towing eyes), container locks: 4 pairs of container lock fittings recessed in the floor for either 2 x 20-foot or 1 x 40-foot containers, stake pockets recessed in the outer frame (internal dimension 80 x 80 mm), central stake pockets recessed in the floor (internal dimension 80 x 80 mm), plug-in stanchions B=80 / D=80 / L=1200 mm, hot-dip galvanized, lashing eyes recessed into the outer frame (each rated at 5 t), 2 toolboxes approx. W=1,230 / H=450 mm, fully enclosed, mounted across the full width in front of the axles, replacing side underrun protection, foremost container lock as removable pin, lashing/stanchion rails transversely recessed in the floor across the full width up to the outer frame, approx. 100 mm high, 20 mm round steel rails, top and bottom, spacing between upper and lower rail approx. 60 mm, bottom finished with angle plate, half open downwards. For lashing and inserting 80 x 80 mm stanchions, open compartment for warning boards (as technically feasible). Axles & Suspension SAF disc brake axles (axle/chassis laser-aligned) to reduce tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and traction aid, activated by 'braking 3 times', 2 ride heights adjustable via hand control: - 1 x for coupling height 1120 mm - 1 x for coupling height 1200 mm Brake System 2-line compressed air brake system, color-coded piping for easy service, spring brake parking brake, 2 non-interchangeable connectors at the front, EBS (Electronic Brake System) with EBS socket at the front, with lift & lower valve, vehicle stability control system. Wheels and Tyres 385/65 R 22.5", steel rims, factory silver finish Electrics 24 Volt, 4 x 3-chamber tail lights, side LED marker lights (yellow), 2 white LED front position lights, 2 rear LED lane-keeping lights (white/red), 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets, without supply cables Rotating beacon with holder, controlled via parking light (removable lamp) 2 pairs of double warning signs, LED-lit, extendable to 4,500 mm and removable with plug. Additional bracket at the rear Additional 7-pin socket (ISO 1724) on rear underrun protection Floor Hnedozb Iu Depfx Aafsp Phenolic plywood approx. 30 mm thick, cross joints with omega inserts, installed on longitudinal stringers, for high point load resistance (forklift axle load up to 7,100 kg max) Front Wall / Corner Posts 25 mm aluminium hollow section, 1,650 mm high, front corner posts in volume version steel Inside of front wall additionally lined with 1,250 mm high phenolic plywood "Crash-Blocker", inner lower section (approx. 140 mm high) with steel impact protection Storage compartment for 80 x 80 mm plug-in stanchions inside front wall Painting Frame: Hot-dip galvanized including passivation, or painted as per customer specification Landing gear feet: Black coated Front corner posts: Galvanized and painted to match front wall color Front wall:

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised transport solution Configure your Fliegl vehicle according to your specifications. The vehicle shown is an example. Production and equipment are tailored individually to customer requirements. Chassis – Semi-Trailer for Forwarding Companies High-tensile fine-grained steel welded construction in lightweight design, kingpin plate with replaceable 2'' kingpin, main frame reinforcement for 25 t capacity, centred over 3 m loading length when retracted. 13 pairs of welded lashing hooks on the cross members for securing straps 23 pairs of recessed lashing rings in the outer frame, each rated at 3.5 t Outer frame fitted with Load-Lock profile for strap attachment Note! Not usable with side boards! Hnsdsi Ri Szjpfx Aafop 24 t, two-speed landing gear, reinforced version for uncoupling under load, single-sided operation Wheel chocks with holders Aluminium side underrun protection Rear underrun guard Half-shell mudguards with anti-spray flaps according to EU regulations 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit 1 closed stanchion storage box, open at the top, fitted under the loading platform, doors on both sides, width=450 mm / height=400/420 mm / length=2460 mm 6 pairs of extendable stanchion sockets for 80x80 mm box-section stanchions, extendable from load width 2000 mm to 3100 mm 4 pairs of recessed stanchion sockets in the outer frame for 80x80 mm box-section stanchions 11 recessed stanchion sockets in the centre of the floor for 80x80 mm box-section stanchions, with reinforcement beams, installed between the outer stanchion sockets 5 x 3 pairs of stanchion sockets recessed into the outer longitudinal beams for 80x80 mm box-section stanchions, with reinforcement - for securing loads in the forward and rear direction during transport of reinforcing mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, with rope guide at the top for belt tensioning 12 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, each with welded lashing ring at the bottom on both sides Note: Stanchion sockets/plug-in stanchions are not designed for sole load securing of long parts, pipes, etc. without lashing 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) 6 construction steel winches with wire rope and reverse hooks, with rope guide through outer frame, 1 removable plug-on gearbox for steel winches supplied loose Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable at approx. every 500 mm Locking via pneumatic pin system + frame locking indicator on both sides, operated via hand button. Controls for brake/lock and suspension on front left (driver’s side) in front of the axles Storage compartment between the longitudinal beams when extended Axles & Suspension SAF disc brake axles, 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reverse light, additional locking on vehicle via hand button and manually via switch in towing vehicle (Pin 10), without truck installation required Axle spacing offset Air suspension First axle with automatic lift function, additionally electrically operable from the truck, with start assist Braking System Dual-circuit compressed air braking system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front EBS make at manufacturer’s choice, Electr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.680 kg, največja dovoljena obremenitev: 35.320 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 15.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is just an example. Production and equipment are customized to meet each customer’s needs. Chassis Lowbed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin 24 t, two-speed landing gear, single-sided operation, with straight base, without shift compensation Rear supports, foldable 2x wheel chocks with holders Aluminum side underrun protection Quarter-shell mudguards in front of and behind axle assembly With splash guards behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted transversely at the front of the gooseneck, with 2 storage trays Extendable widenings up to 3,000 mm (not on rear slope) (the track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden beams on the gooseneck, transverse at the front 70 mm wooden beams for extending to 3,000 mm Digger boom recess over the rear axles, extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low loader 3 pairs of lashing eyes rated at 10 t each in front on the gooseneck, 8 pairs at 10 t each in the lowbed, 3 pairs of lashing rails in the track area of the lowbed, 3 pairs of lashing eyes at 10 t each in the axle/rear area Axles and suspension SAF drum brake axles Axles/chassis laser-aligned: reduces tire wear and fuel consumption With steering axle Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system Two-line compressed air braking system, colored pipes for easier service Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer must only be towed by tractors that ensure ABS functionality! 2 foolproof coupling heads at the front, without connecting line With lift & lower valve, hold function in lower position + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be properly prepared, no truck installation, not a certified scale) Vehicle stability system Trailer Info Center, for displaying vehicle data such as axle loads (not a certified scale), mileage, and diagnostics/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front 1x additional LED work light at the rear 1x LED beacon with holder, controlled via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck with steel/chequer plate cover 70 mm softwood flooring in the track area, steel/chequer plate in wheel arch area, lowbed left and right in track area hydraulically liftable via truck PTO Rear slope with 70 mm softwood flooring Lowbed length approx. 6,300 mm Side boards 25 mm aluminum hollow section, 400 mm high, insertable at the front and sides of the gooseneck Loading ramps Steel ramps, 2,800 mm long, 750 mm wide Tailor-made transport solution Hnsdpfsi Ri Hgox Aafsp Configure your Fliegl vehicle to your requirements. The vehicle shown is for illustrative purposes. Production and equipment will be tailored individually according to customer specifications.

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Višina: 0,70 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje. Hjdpfxewgghne Aafonp