Evv Sv-63P nakup rabljenega (846)

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Lsdeyqr Sxspfx Ahusac

Stanje: dober (rabljeno), Na voljo 10 rabljenih zabojnikov. Trenutno je na voljo 760 novih zabojnikov. Lsdpfx Aeq Ih H Ejhuoac

Stanje: zelo dobro (rabljeno), Ponujam vakuumsko črpalko priznane blagovne znamke BUSCH, model SV 1025 B. Naprava je brezhibna – preizkušena in pripravljena za uporabo. Tehnični podatki: • Model: SV 1025 B • Proizvajalec: BUSCH • Država izdelave: Švica • Končni tlak: 120 mbar • Tip: vakuumska črpalka za zrak in pline Uporaba: • vakuumske instalacije • vakuumsko pakiranje • industrija Ljdpoyxgc Ajfx Ahuoac • proizvodni stroji Stanje: Predmet je bil uporabljen, kaže običajne znake rabe in je v dobrem tehničnem stanju. Popolnoma delujoč. V kompletu: • črpalka BUSCH SV 1025 B • vidna inštalacija/priključek

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, SINGLE-SHAFT TRACKED MULTIBLADE SAW TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Equipped with new guides and a new chain. The upgrade was quite costly—totaling PLN 36,000. TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Installed blade: 400 mm - Max. blade diameter: 450 mm - Blade bore diameter: 80 mm - Max. cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top section features: - Kickback pawls - Sliding shaft - Kickback devices - Smooth sliding roller - Pressure unit - Shaft with bushing and nut - Pressure unit - 2 sliding/pressure shafts Bottom section features: - Roller in front of the table - Guide - Pawls - Track - Central lubrication for track - Electrically adjustable saw shaft height - Electrically adjustable body height: 0.75 kW - Stepless feed speed adjustment (equipped with new 2.2 kW inverter) - Extraction connector diameter: 280 mm - Main motor: 75 kW - Overall dimensions (LxWxH): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Pre-owned multiblade saw - Upper control panel - DTR (technical documentation) included - Excellent condition Lajdpfx Asy Nxdyohujc Warranty on equipment can be provided.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.750 mm, skupna širina: 2.600 mm, skupna višina: 2.150 mm, skupna masa: 1.280 kg, kapaciteta rezervoarja: 2.800 l, The Dorit VV-6-1401 vacuum tumbler is engineered to enhance the quality of meat products by streamlining the marination and tenderising process. Constructed from stainless steel, it ensures durability and hygiene, while allowing for easy front loading and unloading. Its automatic discharge system enables smooth transfer from front to rear, optimising production efficiency. The machine features advanced functions such as a programmable timer for process control and settings for speed, program selection, and vacuum level. Integrated gauges monitor the vacuum and operational status, providing consistently reliable results. This tumbler is ideal for meat marination operations, enabling uniform absorption of curing salts and marinades, while increasing production capacity thanks to a range of programmable options. Lsdpfx Ahju E Ip Aouoac Dorit Vacuum Tumbler for Meat Stainless steel construction Front loading and unloading Automatic discharge from front to rear Programmable interval timer for total time, massage, and rest interval control Adjustment switch for speed, program, and vacuum settings Gauges for vacuum and operating status Voltage: 400 V, 3-phase Frequency: 50 Hz Drum volume: 2800 L / Max. capacity: 1400 Kg Dimensions (D x W x H): 1750 x 2600 x 2150 mm Net weight: 1280 Kg.

Stanje: rabljeno, lastna masa: 7.500 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, dolžina tovornega prostora: 11.600 mm, višina nakladalnega prostora: 275 mm, skupna dolžina: 2.600 mm, skupna širina: 4.000 mm, skupna višina: 12.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, Oprema: ABS, Kögel SKVT 24 refrigerated double-deck semi-trailer | SAF axles with disc brakes | Carrier 1200 | 385/65R22.5 tyres | Toolbox | Temperature data recorder | Electric and diesel deep-freeze unit | Good condition, double-decker | Subject to errors and prior sale Lsdpfxowcf Ifj Ahueac

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 155 kg, volumenski pretok: 200 m³/h, končni tlak: 0 letvica, vrsta hlajenja: zrak, trajanje garancije: 6 meseci, Tovarniško obnovljena enostopenjska vakuumska črpalka SV200 s polno šestmesečno garancijo (ob pravilnem delovanju). Na voljo so 3 črpalke, pripravljene za prodajo. Na slikah je ena izmed črpalk, ostale so enakega videza. Na zahtevo pošljemo tudi merilno poročilo o delovanju črpalke. Priložena so navodila za uporabo, kjer lahko preverite vse potrebne informacije. Lasdpszfh Dxjfx Ahujc

Stanje: zelo dobro (rabljeno), Lowara SV Vertical Pump, 15 kW, 2900 rpm, 39 m³/h. Ljdpfx Ahjvgba Hsueac

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), številka stroja/vozila: C0851000161, Equipment / further information: Final pressure: 150 hPa (mbar) More MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available from our stock. ON REQUEST. Lodpjh Eu Sfefx Ahusac

Stanje: rabljeno, Leto izdelave: 1959, Swing over bed 380 mm Lasdevwgmaepfx Ahusc Swing over cross slide 215 mm Turning length 1000 mm Machine weight approx. 1800 kg Space required approx. 2.7 x 1.2 x 1 m The L&Z lathe is in good condition. Scope of delivery includes extensive accessories and cabinets: - 3-jaw chuck - 4-jaw faceplate - Steady rest

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, MK 4, število obratov od 65 vrt/min do 1200 vrt/min, naprava za rezanje navojev, Laodpjzc Izyofx Ahujc

Stanje: rabljeno, Pressure: 35 t Reach: 220 mm Stroke: 10 - 120 mm Strokes per minute: 120 spm Ram adjustment: 50 mm Table surface: 590 x 440 mm Ram surface: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Features: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work will be carried out in our workshop: - Complete disassembly of the press, cleaning, and technical inspection - Removal of shaft, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Enzian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control and touch display Operation via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) as agreed with the end customer, Standard 0.8-1.0 m beside the machine, incl. new wiring of the press Laedpfxeykb Dqe Ahuec - Foot switch - Two-hand operation - Current accident prevention inspection (UVV) with braking time measurement After modernization, the machine is approved for manual loading operations at open tooling.

Stanje: novo, Proizvajalec: Siemens Stanje: Novo v smislu neuporabljeno, originalna embalaža odprta Tip: Vgradni napajalnik Oznaka: SV-DC/DC Številka artikla: A5E00166828 Uporaba: Napajanje za Siemens PCU50 Kompatibilna platforma: SINUMERIK / PCU50 Tip procesorja PCU50: 333 MHz Izvedba: Vgradni modul Napajalna enota: DC/DC pretvornik Področje uporabe: CNC krmilniki in industrijska avtomatizacijska tehnika Lodpfx Ahozcw Ipousac Način montaže: Vgradnja v krmilno omaro ali v nadzorno enoto

Stanje: rabljeno, Leto izdelave: 2003, Technical Details: Bar diameter: 13 mm Turning length: 205 mm Spindle speed: 12,000 / 12,000 rpm Number of tools: 29 Driven tool stations: yes / 19 Control: FANUC 16iT Total power requirement: 9 kVA Machine weight approx.: 1.7 t Space requirements approx.: 2.7 x 1.4 x 1.7 m CNC Swiss-type lathe, Sub-spindle, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, max. speed 12,000 rpm, C-axis, Sub-spindle with collet chuck, max. speed 12,000 rpm, C-axis, 4-position tool holder 3 cross drilling units 8-station turret various additional tool holders, tailstocks, Kraft und Bauer fire suppression system High-pressure system SF-Systeme Büchele / SHD 150 / 150 bar / 2 x 40 µm / 3 valves, Parts conveyor belt Operating manuals: operation/programming/electrics/spare parts Machine operator tools Up to 29 turning tools and up to 19 driven tools possible 9.0 kVA Tank capacity: 170L Bar feeder FMB Turbo 2-16 / 3200 / A / for Ø2 - Ø20 mm / Machine coolant: oil Machine dimensions: approx. 2700 x 1400 x 1700 [mm] Machine weight: approx. 1700 [kg] Bar feeder dimensions: approx. 4300 x 600 x 1800 [mm] Bar feeder weight: approx. 700 [kg] High-pressure unit dimensions: approx. 1500 x 500 x 1000 [mm] High-pressure unit weight: approx. 250 [kg] Peripheral & accessories dimensions: approx. 1200 x 800 x 1000 [mm] Peripheral & accessories weight: approx. 200 [kg] Lsdpovivygefx Ahusac Peripheral & accessories dimensions: approx. 1200 x 800 x 1000 [mm] Peripheral & accessories weight: approx. 200 [kg]

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, nosilnost: 3.000 kg, dolžina vilic: 1.600 mm, Nastavljalnik vilic ISO razred: ISO razred 3 = 2.500 - 4.999 kg Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Opis: Leto 2019 ISO 3A (51 cm) Nosilnost 3000 kg Stranski pomik Odprtost 400-1200 mm Širina 1300 mm Vilice 1600 mm ID OS1860 Lsdsyi I T Nopfx Ahujac

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, moč: 2 kW (2,72 KM), premer lijaka: 650 mm, višina izmeta: 1.100 mm, vrsta vhodnega toka: trifazni, Certificirano po DGUV do: 07/2027, skupna masa: 500 kg, Tehtnica Scheurer SV 140 E - LED prikaz za nastavitev teže - S centralnim mazalnim sistemom - Robusna tehnika - Stroj je mobilen z 2 fiksatorjema - Trak Mehler - Iztokovni trak nastavljive višine, dolg - Priklop 400V, 16A-CEE vtič - Rabljeni stroj Možnosti: - Vzdrževalna pogodba Laedpfxoyaki Io Ahusc - Škatla z nadomestnimi deli - Servisni paket - Dostava - Uvajanje in zagon Obiščite našo veliko razstavo!

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 mm - Travel: 310 mm - Spindle speed: 280 – 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.01° SUB SPINDLE - Max. bar diameter: 32 mm - Z-axis travel: 150 mm - Spindle speed: 280 – 7,000 rpm - Spindle drive power: 3.7 kW Lsdpfxsuha Elj Ahujac - Minimum C-axis resolution: 0.01° - Number of turret heads: 1 UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 5,700 rpm - Driven tool power: 2.8 kW BUSHING HOLDER 1 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SPECIFICATIONS - Supply voltage: 200 V - Total drive: 8 kVA WEIGHT AND DIMENSIONS - Footprint: 2,645 x 1,403 mm - Machine height: 1,680 mm - Machine weight: 3,880 kg EQUIPMENT - Control: Fanuc 16 iTB - 3-color status lamp - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: IEMCA BOSS 432/32LL - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6127-H106 ojačevalnik SV 180HV SN V11135364, rabljen, manjši znaki uporabe, 100% delujoč, obseg dobave po fotografijah. Lajdpfsx Ercuox Ahusc

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6127-H202 modul SV 10/10HV SN V11128664, rabljen, dobro ohranjen, 100 % delujoč, obseg dobave po slikah. Laodpox Erdrefx Ahusc

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6127-H110 ojačevalnik SV 540HV SN V11446167, rabljen, običajne sledi uporabe, 100% delujoč, obseg dobave v skladu s fotografijami. Lodpfxsx Erdlj Ahusac

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6127-H202 modul SV 10/10HV SN V11129626, rabljen, z manjšimi sledovi uporabe, 100% delujoč, obseg dobave v skladu s fotografijami. Lsdpfex Erdxjx Ahueac

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6127-H209 ojačevalnik SV 80/80HV, SN V11345531, rabljen, manjše sledi uporabe, 100% delujoč, obseg dobave v skladu s fotografijami. Lasdpfx Aox Erfcshuec

Stanje: novo, Fanuc A06B-2266-B400 SV MOTOR AIS 22 SN:C176A4702, neuporabljen v originalni embalaži, 100 % delujoč, obseg dobave v skladu s fotografijami. Lasdpfx Aei D H Rtjhuec

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6127-H209 ojačevalnik SV 80/80HV SN V11119827, rabljen, manjši znaki uporabe, 100 % delujoč, obseg dobave po fotografijah. Lsdpfxox Erd Ss Ahueac

Stanje: novo, Fanuc A06B-2269-B400 # 0100 SV MOTOR AIS 30 SN:C173A0063, neuporabljen v originalni embalaži, 100 % delujoč, dobava po slikah. Lasdpsi D H Rzofx Ahujc