Epson G20-A01Sr Mit Rc180 nakup rabljenega (8.982)

Stanje: nepreverjeno (rabljeno), Epson Type: G20-A01SR / RC180 Epson SCARA Robot with Epson Robot Controller Epson SCARA G20 Long arm with high power The G20 manipulators are suitable for very high payloads, such as heavy components or packaging units with a high weight (up to 20 kg). Epson G20 Max. payload: 20 kg Reach: 850 / 1,000 mm Z-stroke: 180 / 420 mm Epson Controller RC180 Condition: untested / for spare parts, defective! Condition: used Psdpfx Aajvx S Rte Dept Scope of delivery: (see picture) (Changes and errors in the technical data reserved!) If you have any further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 350 mm, širina brušenja: 160 mm, vrsta vhodnega toka: trifazni, skupna masa: 740 kg, največja hitrost vrtenja: 2.900 obr/min, moč: 1 kW (1,36 KM), vhodna napetost: 200 V, premer diska: 250 mm, Oprema: dokumentacija / priročnik, Manufacturer: Mitsui MGG CO.LTD Model: MSG-200M Year of manufacture: 1991-4 Maximum grinding width: 160 mm Podpswvf Hbsfx Aa Dopt Maximum grinding length: 350 mm Maximum table longitudinal travel: 360 mm Maximum table cross travel: 200 mm Table travel per handwheel revolution: 3 mm/rev Grinding spindle speed: 2,900 rpm, 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2,900 rpm, 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP, 1 kW, 4P, 200 V, 3-phase Weight: approx. 740 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Load capacity: 2,000 kg, lift height: 4,000 mm, fork length: 1,220 mm, power: 41 kW, fuel type: gas, machine dimensions (L/W): approx. 2,350 mm / 1,000 mm, operating hours: 1,793 h. Including Bolzoni Shifter 5BSS200F attachment, mast model: 5F20C40, mast height: 2,500 mm. Documentation available. On-site inspection possible. Pjdev Ip Sgopfx Aa Dopt

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 16.060 h, nosilnost: 2.500 kg, dvižna višina: 5.500 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.400 mm, Mitsubishi FG25N Triplo 550 Freelift / Sideshift LPG 2012 Video je mogoče poslati prek WhatsAppa. Psdpoyt Rh Refx Aa Djpt Neprekinjena zaloga, glejte spletno stran. Cene so EXW Nuland. Van de Wert Trading B.V. ima različno zalogo strojev, tovornjakov, prikolic in dodatne opreme. Vse dobave so po trgovinskih cenah in v stanju AS-IS brez garancij (glejte naše splošne pogoje). Za ogled in/ali testno vožnjo lahko brez obveznosti rezervirate termin. Prosimo, pokličite vnaprej, saj nismo stalno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 15.638 h, nosilnost: 2.500 kg, dvižna višina: 5.500 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.400 mm, Mitsubishi FG25N Triplo 550 Freelift / Sideshift / 4. funkcija LPG 2013 Video lahko pošljemo preko Whatsapp. Neprestana zaloga, glejte spletno stran. Cene so EX Nuland. Van de Wert Trading B.V. ima različno zalogo strojev, tovornjakov, prikolic in dodatne opreme. Ppedpfx Ajyt Rhwja Dst Vse naše dobave so po trgovskih cenah v stanju AS-IS, brez garancije. (glejte naše splošne pogoje) Za ogled in/ali testno vožnjo lahko brez obveznosti rezervirate termin. Prosimo, pokličite vnaprej, saj nismo stalno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: rabljeno, Epsons erste Linehead-Inkjet-Etikettendruckmaschine mit LED-UV-härtender Tinte, die L-6034VW/L-6034V, ermöglicht Hochgeschwindigkeitsdruck und ist ideal für Kurz- bis Mittelserien-Einsätze. Sie erzeugt Etiketten mit hervorragender Kratz- und Wetterbeständigkeit. Digitale Etikettendruckmaschine Epson SurePress L-6034 Baujahr 2016 – Serien-Nr. TE90010012 Bildgröße max. 330 x 1000 mm Bahnbreite 80 – 340 mm Bedruckstoffe: PP, PE und PET, gestrichenes Papier, gussgestrichenes Papier und ungestrichenes Papier Materialstärke 3,14 – 12,60 mil (80 – 320 Mikron) Drucktechnologie: PrecisionCore-Linehead-Inkjet-Technologie Schnelltrocknende UV-Tinte Epson UV-Tinte / LED-UV-härtende Tinte Zirkulationssystem für Weißtinte Automatisierte Steuerung und Inline-Inkjet-Düsentest CMYK-, Weiß- und Multi-Lack-Tinten inline installiert Maximale Druckauflösung 600 x 600 dpi Druckgeschwindigkeit bis zu 15 m/min, bis zu 7,5 m/min Tintentyp: LED-UV-härtende Tinten Farbkonfiguration: Schwarz, Cyan, Magenta, Gelb, Multi-Lack, Weiß Online-Video-Inspektion per WhatsApp, MS Zoom oder Telegram möglich Lagerort: Emskirchen/Nürnberg – Sofort verfügbar – Vorführbar Pedpfjy Uwakox Aa Dept

Stanje: rabljeno, Dimensions: 600 mm x 380 mm x 220 mm Pedpolkckusfx Aa Dept - Control unit suitable for Weinig window machines. - 3 units available. Price per unit: €690.00 + VAT.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Na prodaj je delujoč in zelo dobro ohranjen plinski gorilnik, znamke WEISHAUPT WM-G20 / (2600 kW), z plinskim razvodom DUNGS DN65. WEISHAUPT WM-G20 (2600 kW) - Moč: 350-2600 kW - Izvedba: ZM - Leto izdelave: 2015 Pedszab H Depfx Aa Djpt

Stanje: dober (rabljeno), • Type: GS - 250 • Serial No.: 14 Podpfxorgqp Ns Aa Dspt • Year of manufacture: 1999 • Dimensions min.: L1100 mm x W800 mm x H900 mm • max.: L1700 mm x W1300 mm x H900 mm • Power supply: 1 x 220V / 50Hz / 7.8 A • Connected load: 1500 W / 2800 RPM – 1 kW • Price on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Na prodaj je delujoč in zelo dobro ohranjen plinski gorilnik znamke WEISHAUPT WM-G20 / (2600 kW), z plinskim vodom DUNGS DN65. Weishaupt WM G30-1800kW, z plinskim vodom DUNGS DN65 Weishaupt WM G20-1600kW, s plinsko progo Dungs DN65 1. WEISHAUPT WM - G20 (2600 kW) - Moč: 350-2600 kW - Izvedba: ZM - Leto izdelave: 2015 2. Weishaupt WM G30/2-A - Moč: 300 - 1800 kW - Priključni tlak: 15 - 500 mbar - Izvedba: ZM-LN - Leto izdelave: 2006 3. Weishaupt WM G20/2-A - Moč: 250 - 1600 kW - Priključni tlak: 15 - 500 mbar - Izvedba: ZM-LN Ppjdpfxjwgkpis Aa Djt - Leto izdelave: 2008 4. Weishaupt plinski gorilnik G30/2-A, s plinsko progo Dungs DN 65 Izvedba: ZM Moč: 300-2150 kW Priključni tlak: 15-500 mbar Leto izdelave: 2001

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. Ppodpjzaakhefx Aa Djt The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. Ppsdpozaahmsfx Aa Dst For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, število kartuš s črnilom: 4, število tiskalnih glav: 4, loèitev (maks.): 1.200 DPI (pik na palec), širina papirja (maks.): 108 mm, Epson ColorWorks C7500G je visokozmogljiv industrijski brizgalni tiskalnik za etikete, zasnovan za hitro, barvno tiskanje na zahtevo, posebej optimiziran za sijajna (glossy) medija. Omogoča visoko hitrost tiskanja do 300 mm/sek pri ločljivosti 1200 x 600 dpi, zaradi česar je idealen za visoke naklade, trajne in interne kratkoročne serije označevanja. Ključne lastnosti in zmogljivosti Optimalno za sijajna medija: - "G" v oznaki C7500G pomeni, da je naprava posebej prilagojena delu z mediji s sijajnim premazom. Uporablja Epsonove pigmentne črnila UltraChrome DL za žive, razmazno in vodoodporne etikete. - Industrijska hitrost in kakovost: Tehnologija linijskega tiskanja PrecisionCore MicroTFP zagotavlja visoko hitrost tiskanja do 300 mm/sek pri ločljivostih 600 x 1200 dpi. Pedoy Ruzkopfx Aa Dspt - Stroškovno učinkovita lastna (in-house) proizvodnja: Omogoča nadomestitev predtiskanih etiket s hitro izdelavo lastnih po meri, s čimer se zmanjšajo zaloge in odpadki. - Robustna in vzdržljiva konstrukcija: Ohišje iz kovine s priloženim avtomatskim rezalnikom, prilagojeno industrijskim okoljem. - Enostavna integracija: Emulacija ZPL II za nemoteno vključitev v obstoječe delovne procese. Tehnične specifikacije: - Tehnologija tiskanja: PrecisionCore brizgalna tehnologija - Največja širina tiskanja: 108 mm (do 4,25") - Vrsta črnila: pigmentna črnila UltraChrome DL (posamezne kartuše: cian, magenta, rumena, črna) - Povezljivost: Ethernet, USB 2.0 - Širina medija: 50 mm – 112 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 91130417, Leto izdelave: 2018, obratovalne ure: 320 h, nosilnost: 1.600 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 1.550 mm, težišče tovora: 600 mm, tip droga: triplex, gradbena višina: 2.200 mm, model baterije: PzS, kapaciteta baterije: 465 Ah, napetost baterije: 48 V, dolžina vilic: 1.150 mm, Oprema: UVV varnostni pregled, Jungheinrich ETV 216 regalski viličar s triplex dvigalom 500DZ v zelo lepo ohranjenem stanju. Naprava z malo delovnih ur, integriranim stranskim pomikom, popolnim prostim dvigom in kompaktno konstrukcijsko višino. Tehnično in vizualno v dobrem splošnem stanju, takoj pripravljena za uporabo, vključno s polnilcem. Možen izvoz in transport. Ppodpfoy Tpuksx Aa Djt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video ist nur ein Beispiel, wie man diese Zelle vorbereiten kann Zelle mit Schleifroboter Kuka KR 180 Schleifzelle Berger 2012 (Außenschleifen A1) - Gesamtgewicht ca. 6300 kg - Abmessungen von der Zelle: ca. 4650 x 2400 x 3100 mm 6-Achsen Roboter Kuka KR 180 R2500 Extra - Baujahr 2011 - Steuerung KRC 4 - zusätzliche Achse (7. Achse) Bandschleifstation BSS10 Ppedpfxog Saqve Aa Det - max. Riemenabmessungen 3500 x 30 mm - max. Kontaktscheibendurchmesser 200 mm - Motorleistung 4 kW 2 x Polierstationen, - Polierscheibendurchmesser 350 - 600 mm - Leistung 5,5 kW Greiferwechselschrank BandfördererInteroll Automation GmbH - Gesamtlänge ca. 2000 mm - Bandbreite ca. 440 mm Im Preis ist ein komplettes Konzept wie auf dem Video zu sehen ist Wir haben 4 solche Zellen. Es ist möglich, jedes Detail zu machen, wie Sie im Video sehen können

Stanje: zelo dobro (rabljeno), Hydraulic cylinder, support cylinder - Piston diameter: approx. 130 mm - Piston rod: 100 mm - Stroke: approx. 700 mm - with support rollers - each cylinder equipped with hand pump - Quantity: 3 cylinders available Ppedpfsb A Hvlox Aa Djt - Price: per piece

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stair Stringer Milling Device SCHEER TW 4 + Router HM 16 Everything is in visually and technically excellent, as-new condition, the machine has been used very little. Everything works perfectly. You can start working with it immediately. All machines are intended for professional/commercial use, not hardware store junk. Stair Stringer Milling Device SCHEER TW 4 With this device, you can mill steps and risers very precisely and accurately. The hand crank even allows you to process curved end faces; you can also use it for milling cutouts in other panel materials, for example, kitchen worktops. Equipped with hardened guide shafts, on which the cross slide with the router is mounted. With ball bearing guide bushings, allowing the device to be moved very easily, accurately, and safely. The machine can be securely clamped to the stringer or similar workpieces with 4 screw clamps. The cross slide features two stops each for both longitudinal and transverse directions. Comes with two positioning angles. Includes user manual, tools, and all accessories. Ppodpjyxr T Tsfx Aa Dot The milling travel in the longitudinal direction is 750 mm; in the transverse direction, the milling travel has been increased from 75 mm to 320 mm, which has significantly expanded the possible uses of the machine. To increase the milling travel, a new base frame made of aluminum profiles had to be built. The modification work was carried out by a reputable mechanical engineering company. Everything works perfectly; this machine is truly unique. Router SCHEER HM 16 Very good condition, with only minor signs of use. Extremely robust due to the triple-supported milling spindle. Precise concentricity and flawless milling finish. Accurate column guide and torsion-resistant milling table. Constant speed even under heavy load. With high-performance motor (virtually no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. This machine is suitable for the heaviest continuous milling operations. Good visibility of the milling shaft; chips are blown away by a strong fan. 220V, 1800W Speed: 18,000 rpm Works flawlessly. With M16 IG tool holder.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), številka stroja/vozila: LNDE002222, Ink technology: Ultrachrome® Colors: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum droplet size: 3.5 pl Nozzle configuration: 360 nozzles (black), 360 nozzles per color Print resolution: 2,880 x 2,880 dpi Paper formats: A0, A1, A2 (42.0 x 59.4 cm), DIN A3+, A3 (29.7 x 42.0 cm), A4 (21.0 x 29.7 cm), B1 (72.8 x 102.8 cm), B2 (51.4 x 72.8 cm), DIN B3, DIN B4, 17 inch, 24 inch, 44 inch Page margins – single sheet mode: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Supported media thickness: 0.08 mm – 1.5 mm Duplex: NO Pjdpopitkrsfx Aa Dept Equipment / further details: supplied with roll stand

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje Ppjdpoyzrp Hsfx Aa Dst S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Avstrijsko vozilo Originalno le 15.020 km Popolno za predelavo v avtodom

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Psdpjy Uh Sqjfx Aa Dept Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: Pjdpfxsy Uh Rms Aa Dopt - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Pjdpfx Aajh R Taqe Dopt - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Ppjdpfxjmhhy Ns Aa Dst Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: nepreverjeno (rabljeno), 2 kosa robota Epson G6-651S Leto izdelave 2019 2 kosa krmilnika Epson RC 700-A Podpfx Aajynt Hro Dspt Prodaja v paketu z ohišjem, kot je prikazano Ponudba je namenjena izključno podjetjem v smislu §14 BGB.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale With forward/reverse rotation Pjdpey Rh Nzsfx Aa Dept The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately 380 V, 5500 W, with motor circuit breaker for overload protection Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling