Dvojna Navijalna Naprava Z 2 Servomotorji nakup rabljenega (99.985)

Stanje: dober (rabljeno), Dvojni odvijalni boben, boben, odvijalni boben Blodpfeylil Eex Acmoh -Odvijalni boben: dvojni boben z 2 servomotorjema (vsak boben poganja samostojno) -Pogon: 2 servomotorja Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Boben: Ø 1050 mm -Držala: glej fotografije -Dimenzije: 1050/840/H1755 mm -Teža: 200 kg

Stanje: rabljeno, Flexible milling cell with 6-axis ABB industrial robot - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary table changer featuring 2 workstations, robot cell Serial No. 24-51541 Year of construction: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 Bedsyaq Nujpfx Acmslh Controller: ABB model IRC5 with Tech-In panel High-frequency milling spindle PERSKE model KRS 35.3-2, output 1.2 kW, speed 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight (net): 380 kg Table size (Table 1) with aluminum top: 500 x 500 mm Table size (Table 2) with Pertinax top: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The entire system is designed as a compact milling cell with a rotary table - Switch cabinet and robot control cabinet all mounted compactly on the milling cell - Motorized rotary indexing table (presumably WEISS make) with fixed indexing step = 2 stations = 180° - Rotary table, 180° rotation angle, with partition wall and two clamping surfaces for fixtures - While the milling cycle is running, one side of the rotary table can be loaded with new workpieces - Front safety guard with light curtain for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Approximate weight of milling cell: 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge finishing, milling cut-outs, drilling, etc. Also suitable for machining plastics or similar materials. If interested, please request a video from us.

Stanje: rabljeno, Leto izdelave: 1998, OSCILLATING MORTISER WITH 2 TABLES BALESTRINI MOD. MICRON - CE - USED - Voltage: 380/50 - Serial No.: AF657 Y11 Bedpomxkwdofx Acmslh - Year: 1998

Stanje: rabljeno, Dvoglava kotna žaga RAPID tip DGL 5000 / 500 Potreben popravila – krmilje ne deluje Leto izdelave: 1993 Bodpfx Aoyxy S Djcmjlh Dolžina reza: 5000 mm Najkrajša dolžina obdelovanca: 350 mm Premer žaginega lista: 500 mm - Krmilje ne deluje Dimenzije (D x Š x V): 7200 x 1700 x 1850 mm Teža: 1250 kg Sprostimo prostor Ugodni stroj – idealno za izvoz

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Bledpjxmt Eqsfx Acmsh

Stanje: rabljeno, Leto izdelave: 2009, Premer odsesavanja: 250 mm Nazivni volumenski pretok: 3534 m³/h Filtrirna površina: 22,6 m² Motor: 5,5 kW Briketiranje: zmogljivost ca.: 30 kg/h Bedpoyym A Ssfx Acmjlh Premer briketa: 65 mm Motor: 3,0 kW Lokacija skladišča: Nattheim

Stanje: rabljeno, Leto izdelave: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum suction pads: 6 / 2 standard type Standard end stops / position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles std./number/speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles std./number/speed rpm: 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power std. / opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Tool changer, traveling with the support in X: 4 positions, pneumatic INSTALLATION Bodpfoyymz Ujx Acmelh Installed power KVA: 23–28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction port diameter mm: 150+150 (200) Machine weight kg: 3000 * X Distance between stops – Y cutter center as reference; Z workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in frame design with work table equipped with adjustable workpiece supports and vacuum suction pads, suitable for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Groove milling with disc cutter in the X direction - General milling operations Self-supporting structure and work table: Steel welded frame construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or optionally different support carriers. Box-type construction made from cold-rolled steel with internal reinforcement ribs, protective covers with component group consisting of a drilling head with vertical and horizontal spindles, integrated grooving and saw unit, and an SCM electrospindle with quick-change tool system type HSK 63 F. Travel paths of the portal and support carrier: Movement in the X, Y, and Z axes takes place on linear prismatic recirculating ball guides with preloaded bearings. Movement transmission of the X-axis (moving stand) is via a preloaded, backlash-free rack-and-pinion drive with helical gears. Movement of the support carrier in Y and Z directions is via preloaded ball screws. Positioning of the working units and machine functions is managed by "brushless" AC servomotors and digital drives. CNC CONTROL UNIT The control unit consists of a numerical control for milling and drilling machines and a connected PC with a graphical user interface "XILOG PLUS". - PC-Office operating system Windows XP - Color LCD screen 17" - QWERTY keyboard - Swivelling control panel - Machine interface software Xilog Plus Xilog Plus features: Programming - Parametric, graphical and ISO programming - Import of DXF and ASCII files - Straight line or circular interpolation in three axes, linear in space, spiral on the chosen plane - Assisted programming with graphical and syntax help for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on inclined or curved panel edges - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional features - Calculator for direct data transfer - S

Stanje: rabljeno, Sesalni filter z 2 vrečama, rabljen. Filtracija z 21 rokavom premera 20 cm, dolžina 240 cm. Bljdsy S Acrepfx Acmeh Sesalni motor z inverterjem, približno 2-3 kW.

Stanje: rabljeno, Column Drilling Machine, Geared Head Drill Press ALZMETALL Type AB 40 ST Production Drill Serial No. 750 Year of manufacture: 1994 Drilling capacity: 40 mm Spindle taper: MT 4 - Short quill Throat depth: 325 mm Quill travel: 200 mm Table size: 740 x 460 mm Drill head height adjustment: 700 mm Distance spindle-table: max. 1015 mm Blodpfx Acsza Hzgsmoh Spindle speed: 56 - 2500 rpm, 12 gear steps Automatic feed: 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 12-step gear transmission - Drilling and tapping function with forward/reverse rotation - Electric foot switch for reversing spindle direction to left-hand rotation during tapping interruption - Rapid feed via hydraulic quill movement - Semi-automatic operating sequence: rapid approach – working feed – rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height adjustable from 740 to 1170 mm) - Coolant device included - Control cabinet mounted on the rear of the machine - Mounted on steel plate (1300 x 750 x 15 mm) with machine feet - Quick-action drill chuck METABO 3 to 16 mm - Operating instructions and electrical diagram Overall height with drill head in top position: 2750 mm Space required (L x W x H): 1400 x 850 x 2300 mm Weight: 1250 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 650 h, Funkcionalnost: popolnoma funkcionalen, delovno območje: 6.000 mm, najv. debelina pločevine: 150 mm, najv. debelina jeklene pločevine: 150 mm, dolžina mize: 6.000 mm, delovna širina: 2.000 mm, Oprema: dokumentacija / priročnik, Used Microstep CombiCut 6001.20 for applications up to 150mm mild steel The system is equipped with the following features: - CombiCut gantry, dual-side drive - Oxy-fuel torch support, acetylene up to 150mm cutting capacity - Full-automatic piercing Drilling unit with 10.3 kW drill support: - Dual-sided guided hold-down - Drilling up to 30mm diameter - Thread cutting up to M20 - Countersinking matched to drill diameter Bledpfx Acey Uw Hwemsh - Including calibration unit for drilling tools All tools and carriages on the gantry are powered. Retrofitting for plasma (straight) cutting is possible! Tool changer mounted at the table front for 6 tools, SK40 holders (not included) Thermal cutting table 6000 x 2000mm, designed for plates up to 150mm thickness - Table is cleaned and ready for immediate use (consisting of two segments) - Table features electronic flap control - Standard filter unit connection possible; filter units can be offered optionally. Externally positioned CNC control unit with 24" monitor Control cabinet mounted on the gantry for minimal trailing cables – very maintenance-friendly Guides: - Machined S49 rails with diagonally ground gear racks The machine has been thoroughly tested and inspected. All functions are present and fully operational. The system features an Asper license (CAM software) installed on the machine and can be connected to a network. Office licenses are not included! We can offer the unit with installation and commissioning. If installed by us, the unit comes with a functional guarantee. Additionally, when commissioned by AK Industry, the machine receives a 3-month warranty. Inspection possible at any time!

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5102-0AF01-2 - Z servomotor SN: EC686371001001 - Z = G51 (pripravljen za dajalniški sistem) z 1FU1050-6GF 13,3 mVmin, strokovno popolnoma obnovljen in preizkušen, 100% delujoč, obseg dobave kot na slikah. Bledpfjzahvxjx Acmeh

Stanje: rabljeno, Območje varilnega toka - 200 A Teža pribl. 130 kg Dodatna oprema / Posebne značilnosti: - Dvozložni pomik žice - Vklj. komplet cevi in maso kabel Bsdpfxozai Nmj Acmelh Siegfried Volz Obratovalni stroji Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Nemčija

Stanje: zelo dobro (rabljeno), Nudim profesionalno hidravlično reševalno napravo priznane znamke LUKAS, model LSP 44 B. Oprema, uporabljena pri reševanju (npr. gasilci), se odlikuje po zelo visoki kakovosti izdelave in zanesljivosti. Tehnično stanje: Naprava je delujoča, preizkušena in pripravljena za delo. Ima običajne znake uporabe, vidne na fotografijah. Blodpeyxrbdofx Acmjh Tehnični podatki: Proizvajalec LUKAS / FAG Kugelfischer Model LSP 44 B Tip DSH-20-2 Napajanje 230 / 240 V Motor Leroy Somer približno 1,1 kW Država izvora Nemčija V kompletu: Hidravlični agregat Hidravlične cevi Boben za cevi Delovni element kot na fotografijah Uporaba: Tehnično reševanje Gasilske enote Reševalne službe Hidravlična dela

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, For sale: Professional water treatment and preparation unit UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Ideal for flushing, filling, and treating installations. The equipment is in very good technical condition, complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Bodeyz Dhzjpfx Acmslh Power: 0.5 kW Weight: approx. 59 kg Max operating temperature: 80°C Max pressure: 6 bar 🔧 Equipment: Integrated tank EBARA pump (high quality) Flow meters Manometers Control valves Mobile transport trolley Documentation + accessories (as shown in the photos) 🔍 Condition: Used device Very good technical condition Minor, normal signs of use Fully complete ⚠️ Remarks: One of the manometers has a damaged housing (cover) – visible in the pictures The functionality of this manometer has not been tested The part can be easily replaced if required 📦 Applications: Heating systems Water installations Service and cleaning of installations HVAC systems 🚚 Delivery: Pallet shipping possible Personal collection possible

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5072-0AC01-2-Z motor s permanentnim magnetom SN: E9L10908104023 - Z = G45 (vgrajena zavorna zavora) z 1FU1050-6GC 20,0 mV/min tahometrom in EBD 2M 24V - 23W zavorno zavoro, rabljen, dobro ohranjen, 100% delujoč, dobava kot na slikah. Bledey U Tmaspfx Acmoh

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5072-0AC01-2 - Z SN: YFTN36396001001, professionally fully inspected and tested, in good condition, 100% functional, scope of delivery as per photos. Bjdpsrxnbgsfx Acmjlh

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5072-0AC01-2-Z permanent magnet motor Z = G51 / H40 SN: E0T98376302008 + Hohner TX.351247 10I0 rotary encoder SN: H33K50, used, normal signs of use, 100% fully functional, scope of delivery as per photos. Bledpfsmah Dlox Acmjh

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5072-0AC01-2-Z permanent magnet motor without cover, Z = G51 / H40 SN: E0T98376302003, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos Bedpfembr Ntsx Acmelh

Stanje: rabljeno, Dolžina ~ 450 mm Širina ~ 650 mm Bledex R Ttlspfx Acmjh Višina ~ 1.100 mm Baterijski ročni napenjalec trakov BW-03 z 2 akumulatorjema, polnilcem in odvijalnim vozičkom Cyklop ter 2,5 koluta trakovega materiala.

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5066-0AF01-2 - Z servomotor SN: ECU87441401002 - Z = H40, K31 (druga identifikacijska ploščica), K93 (ohišje IP67) z 1FU1050-6HF 13,3 mVmin tahogeneratorjem - Manjka tesnilo v priključni omarici, rabljeno, dobro ohranjeno, 100% delujoče, dobava skladno s fotografijami. Bljdpfsy U Eglox Acmeh

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 1799-250034, KUKA KRC2 / KR 60L30-3 robot je bil uporabljen za samodejno odstranjevanje komponent iz plazemskega rezalnika Kaltenbach KF 1606 s skladiščnim sistemom Remmert. Trenutno je naprodaj KUKA KR60L30-3 robot skupaj z ustrezno krmilno omaro in krmiljenjem. Remmert odlagalni sistem in vzdolžna vodilna tirnica nista več na voljo. Bledpfx Acoyilcrsmsh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, proizvajalec krmilnikov: AGIE, število osi: 3, Ta 3-osni AGIE Hyperspark 2 Exact z Erowa je bila izdelana leta 2005. Ima pomik po osi X 350 mm, po osi Y 250 mm in po osi Z 250 mm. Stroj je opremljen s programsko opremo AGIE VISION 4 ter vključuje EROWA ROBOT MULTI s 60 mesti ITS 148 in 240 mesti za magazine ITS 50. Če iščete visokokakovostne potopne erozijske stroje, priporočamo, da razmislite o stroju AGIE Hyperspark 2 Exact, ki je na voljo za prodajo. Za več podrobnosti nas kontaktirajte. Bodoy S A Dcspfx Acmelh • EROWA ROBOT MULTI s 60 mesti ITS 148 in 240 mesti za magazine ITS 50

Stanje: rabljeno, popolnoma iz nerjavečega jekla premično Bsdszbi Acopfx Acmelh kolotek 600 mm brezstopenjska hitrost nastavljiva delovna višina z izpihovalno napravo zunanje mere (D x Š x V): pribl. 3.400 x 1.300 x 1.900 mm

Leto izdelave: 2017, stanje: rabljeno, Mecalux Roller Conveyor Right-Angle Transfer Pusher 90° 1050-815-730 RA1914 Manufacturer: Mecalux Direction of travel: bidirectional Roller width (RW): 730 mm Nominal/outside conveyor width (NW): 745 mm Overall width: 815 mm Length: 1050 mm Roller diameter: 50 mm Roller pitch: 75 mm Blodpfx Acsra Hpxomeh Transfer motor: Lenze motor 3x 400V, 0.25 kW Roller drive: 1x ITOH-Deki 16936/010 Frame height: 130 mm Current set height: 745 mm Conveying speed: stepless adjustment via frequency inverter between 0.543 and 0.95 m/s Scope of delivery: includes supports and photoelectric sensor Optional: Side guides (single or double-sided) For individual, professional consultation, please feel free to contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Leto izdelave: 2017, stanje: rabljeno, Mecalux Roller Conveyor Transfer Pusher 90° 915-1410-870+445 RA1915 Manufacturer: Mecalux Direction of travel: bidirectional Roller width (RB): 870 to 450 mm Nominal/outer conveyor width (NB): 960 and 540 mm Overall width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller pitch: 75 mm Transfer pusher motor: Lenze motor 3x 400V, 0.25 kW Roller drive: 2x ITOH-Deki 16936/010 Frame height: 130 mm Current set height: 725 mm Conveying speed: continuously adjustable via frequency converter between 0.543 and 0.95 m/s Bljdjra Hp Ajpfx Acmsh Scope of supply: including supports and light barrier Optional extras: Single or double-sided side guide available For personalized, expert advice, simply contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics