Donau Danusys Ds 2910 L nakup rabljenega (66.665)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, proizvajalec krmilnikov: Heidenhain, TEHNIČNI PODATKI Pomik X: 2.900 mm Pomik Y: 1.000 mm Giodpoxltfhefx Afwjt Pomik Z: 700 mm Vpenjalo orodja: SK40 Orodni položaji: 32 PODROBNOSTI O STROJU Proizvajalec krmiljenja: Heidenhain OPREMA Transporter za ostružke

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Work Table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 T-slot size mm 18 Travel Paths X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance table top - spindle nose min/max. mm 150 / 850 Main Spindle Drive for 8000 rpm AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: rpm 15 – 8000 Torque at 44% duty cycle Nm 96 Constant up to rpm 1500 Feed Drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect linear measuring system Accuracy Positioning accuracy X, Y axis over 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 Tool Magazine 2 x 24 stations Disc-type magazine - Tool stations 16 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 300 Gjdpjw E Ey Hefx Afwoit - Max. tool weight kg 8 Machine Control Heidenhain TNC 426 Splash Guard Enclosure Enclosure of the entire working area, designed as partial compartment protection in compliance with the applicable German accident prevention regulations (UVV) and European standard EN 12417, with manually operated work area door including electrical interlock. Machine door with polycarbonate glazing. 30 bar High-Pressure Coolant System (IKZ) For the use of tools with internal coolant supply, switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar. Complete with separately standing paper band filter. Internal cooling is also possible with air. Clean tank capacity l 500 Filtration grade µm 30 Filter capacity l/min. 120 Hinged Belt Chip Conveyor In place of the chip collection tray with integrated coolant tank, right-side discharge Discharge width approx. mm 300 Discharge height approx. mm 1050 including coolant system Tank capacity liters approx. 150 Conveying capacity l/min. 30 Pump output bar 2.0 Handheld Unit HR 410 HEIDENHAIN External control unit with built-in electronic handwheel, connected via cable to the machine, for manual axis movement, with emergency stop button Centralized Grease Lubrication System Documentation Operation and programming manual Hydraulic and pneumatic circuit diagrams Electrical wiring diagram Test protocol

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 65039, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Travelling Column Machine Completely Overhauled in 2023 Work Table Clamping Surface mm 1500 x 1000 Table Height mm 750 Number of T-slots 6 T-slot size according to DIN 650 mm 18 Travelling Distances X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance Table Top – Spindle Nose min./max. mm 150 / 850 Main Spindle Drive for 8000 rpm AC Motor, frequency controlled kW 16 at 44% duty cycle Speed Range: rpm 15 – 8000 Torque at 44% duty cycle Nm 104 Constant up to rpm 1500 Gisdjwv Nl Uopfx Afwst Feed Drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid Traverse Speeds (X/Y/Z): m/min 30/30/20 Indirect linear measurement system Accuracy Positioning accuracy X, Y-axis over 1000 mm mm ± 0.0150 Repeatability X, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeatability Z-axis mm ± 0.0075 24-position Tool Magazine Mounted on the right of the travelling column - Tool stations 24 - Tool holder (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine Control: Heidenhain iTNC530 (optional 620)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, CNC vrtalno-rezkalni center Donau DANUSYS 2910, letnik 2002, obnovljen Tehnični podatki: Krmiljenje Heidenhain iTNC 530 Pomiki osi X, Y in Z: 2900 / 1000 / 700 mm Rezkanje St 60: 300 cm³/min Vrtanje v poln material St. 60: ø 40 mm Rezanje navojev: M30 Podajalna hitrost osi X, Y in Z: 7 / 7 / 7 m/min Godpfswymtqjx Afwsit Vreteno HSK 63, 15000 obr/min Hlajenje IKZ in AKZ Menjalec orodij z 32 mesti, razdeljeno na 2 x 16 kosov Obnovljeni deli: - Vreteno popolnoma obnovljeno in na novo navito s strani proizvajalca - Servisiran regulator vretena - Obnovljena napajalna enota Heidenhain - Preverjen glavni računalnik Heidenhain MC422 in krmilna enota CC422 - Zamenjani vozički in vodila osi y Dodatna oprema: Ročni obroč HR 410 Transporter ostružkov z integriranim rezervoarjem za hladilno tekočino Dokumentacija (navodila za uporabo, različni priročniki uporabljenih dokumentov, električna shema itd.) Prodaja iz zaloge; vmesna prodaja pridržana

Stanje: rabljeno, Leto izdelave: 2006, x-pomik 2900 mm y-pomik 1000 mm Gjdpfxew S Nk Ie Afwjit z-pomik 700 mm Krmiljenje Heidenhain SK40

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Travelling column machine Completely overhauled in 2025 Worktable clamping surface mm 1500 x 1000 Table height mm 750 Number of T-slots 7 T-slot size DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top to spindle nose min/max mm 150 / 850 Main spindle drive for speed 8000 rpm Tool holder SK 40 AC motor, frequency controlled kW 26 at 44% duty cycle Speed range: rpm 15 – 8000 Torque Nm 245 Internal coolant supply (IKZ) Chip conveyor band filter system Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect linear measurement system Accuracy Positioning accuracy X, Y-axis over 1000 mm mm ± 0.0150 Repeatability X, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeatability Z-axis mm ± 0.0075 24-position tool magazine, mounted on the left side of the machine - Tool stations 24 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 Godpew I Tm Sofx Afwjit - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530

Stanje: novo, SPS krmilna plošča menjalnika Novo za staro Za samostojno montažo ali vgradnjo s strani enega od naših serviserjev Gisdjy Rkkhepfx Afwst

Stanje: novo, Nadomestni deli za hitre radialne vrtalke Donau: Donau DR, Donau Danuflex, Donau Danumeric, Donau Danusys, Donauflex, Donaumeric. Gedey Ri H Iopfx Afweit

Stanje: skoraj kot novo (rabljeno), Primerno za Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Giedpjy Ri Hnofx Afwet

Stanje: generalkompletno obnovljen (rabljeno), Popravilo plošče za število vrtljajev Godjy Rfzuepfx Afweit

Stanje: rabljeno, zmogljivost vrtanja: 23 mm, Oprema: Na voljo je tipska ploščica, Hitro radialno vrtalni stroj - Stebrna vrtalna stiskalnica Donau Werkzeugmaschinen DR23 radialni vrtalni stroj Serijska številka 2062-4 Obratovalna napetost 380 V z ničelnikom, 50 Hz, 3 faze Vrtalna zmogljivost: do pribl. Ø 50 mm Območje števila obratov: 58 - 1275/min Naprava za rezanje navojev, izteg 920 mm Strojna luč Osnovna plošča, velikost mize pribl. 1100x400 mm Moč motorja pribl. 1,5 kW, brez hladilne naprave Gisdpewybqqefx Afwst 2 T-vodili zadaj levo Teža: pribl. 1.200 kg Ogled s priključeno napetostjo je možen po predhodnem dogovoru. Za vse tehnične podatke velja pridržek napak in napačnih podatkov. Cena na zahtevo Prodaja izključno v državah EU.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Overhauled in 2026 • Work table 1200 x 750 mm with 5 T-slots • Radial arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • Each with 2 T-slots (18 mm) in machine base at rear and left • Machine lamp • Central lubrication • Table surface machined all around • Drill guard • Coolant system Gedsyv A Ucopfx Afwsit Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Worktable height mm 900 Machining Capacity Drilling capacity, solid St 60 Ø 45 GG 22 Ø 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm: kg 2600 Documentation Operating instructions, incl. lubrication & hydraulic diagram wiring diagram

Stanje: rabljeno, Leto izdelave: 1994, Rapid radial drilling machine Donau Danuflex145 Godpfewtq Dyjx Afwjit

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Gijdjyucahspfx Afwjt Takoj na voljo iz zaloge.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Giedjynt Ucjpfx Afwjt Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Gsdpjylnpiofx Afweit Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Giedpfxoyhdvko Afwet Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, mobile air filtration extraction box Box with built-in fan and filter cartridge. Equipped with HEPA filter. For ventilation, filtration, and extraction of room air. Extraction capacity approx. 1800 m³/h Exhaust fan: IMOFA DS 11-4, 460 Watt, 50 Hz, 4.8 Ampere Voltage: 230 V, 50 Hz Systemair RTRE 5 transformer controller 4 filter cartridges Giedpfx Afsvvcqxjwot 1 ULTIMA RP HEPA filter, 3000 m³/h Aluminium frame housing, mobile with lockable castors Dimensions: 100 x 100 x 80 cm Weight: approx. 120 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel distance 1050 mm • Drilling spindle MT 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm), machine base rear and left each • 3-axis digital readout • Machine lamp • Central lubrication • Worktable surface machined all around • Safety guard at drill • Coolant system Dimensions and Travel Ranges Tool holder MT 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle bottom edge - min mm 40 table top edge max. mm 710 Distance spindle bottom edge - min mm 840 base plate max. mm 1510 Drilling radius min mm 540 Gijdpfx Afjx Uwpxjwjt max. mm 1590 Worktable height mm 900 Machining Values Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Infinitely variable feed mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagrams Electronic circuit diagram

Stanje: dober (rabljeno), Leto izdelave: 2018,

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DSPL-2025-Q2-01, skupna masa: 150 kg, vhodna napetost: 400 V, vhodni tok: 10 A, vrsta vhodnega toka: Klimatska naprava, trajanje garancije: 12 meseci, skupna dolžina: 1.560 mm, skupna širina: 780 mm, skupna višina: 950 mm, vhodna frekvenca: 50 Hz, vrsta zaščite (IP koda): IP20, leto zadnje generalne obnove: 2025, Integrated Pick-and-Place System for Industrial Assembly Technology The DS Place has been developed to reduce the high integration effort associated with conventional pick-and-place solutions. In many projects, robots, feeders, vision systems, and controls are procured separately and integrated via interfaces. This results in increased coordination effort and longer commissioning times. Gisdpfx Afow Rm Hwewot The DS Place is designed as a fully coordinated complete system. System Components: - SCARA Robot - Camera-based component recognition - Automatic feeding via material hopper and pick conveyor - Integrated PLC control system Functionality: Components are automatically conveyed from the material hopper onto the pick conveyor, identified by a camera, and then precisely transferred to a discharge conveyor or a downstream system. Technical Specifications: - Throughput: up to approx. 1,200 parts/hour - Suitable for metal, rubber, wood, and plastic parts - Maximum component length: approx. 30–35 mm - Gentle handling - Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O - Commissioning: position, teach discharge location, start Fields of Application: - Automatic assembly - Sorting and transferring of small components - Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Drilling capacity steel/cast iron: 25mm/32mm, thread cutting capacity steel/cast iron: M20/M24, tool holder: MT4, spindle speed: 3500rpm, feed rate: 1050mm/min, outreach: 420mm-1320mm, arm travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Gijdpfeu N Hdaex Afwjt

Leto izdelave: 2024, stanje: novo, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250 kg) / Motor KD63 / Friction trolley drive DRF200 Replacement fan cover / fan hood – not an original part! OEM part number 12481133 Larger quantities available on request. NEW, unused Godpfxsq U Iite Afwsit Item location: 75053 Gondelsheim See photos for details.

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 133120, Offer 24506 Technical Data: - Drilling capacity in solid steel ST 60: 35 mm - Drilling capacity in cast iron GG 25: 42 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 36 - Spindle taper: MK 4 - Quill stroke: 170 mm - Spindle speed, stepless: 20 – 3200 rpm - Feed, stepless: 0.02 – 0.70 mm/rev - Drilling radius approx. min. / max.: 490 / 1240 mm - Swivel angle: 330° - Table size: 1200 x 620 mm Giodpfjwndydjx Afwot - Table height: 900 mm - Motorized height adjustment / Column travel: 450 mm - Hydraulic column and arm clamping - T-slots vertical on the left side of the machine - Coolant system - Drive: 400 V / 5.0 kW - Required space approx. (W x H x D): 1500 x 2600 x 1700–2500 mm - Weight approx.: 2100 kg

Stanje: novo, ETEL TMB0291-050-3TDS-E82 torque motor, serial number, unused in original packaging, 100% fully functional, scope of delivery as per photos. Gisdpfx Afolki Twswot