Dmg Mori Nlx 2000 Sy 500 nakup rabljenega (24.266)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC krmilnik: M730BM Zmogljivost Pomik Y-osi mm: ±50 Dolžina struženja mm: 510 Maks. premer struženja mm: ø 356 Zgornji revolver Število orodnih mest kos: 12 Hitrost pogonjenih orodij vrt/min: 10.000 Glavni vreteno Hitrost vrtenja vretena vrt/min: 5.000 Proti-vreteno Hitrost vrtenja vretena vrt/min: 6.000 Avtomatizacija (gantry nakladalni sistem GX-05 AI) Lajdpfx Aoyn Iatol Nsa GX-05 AI Gantry Loader paket (namestitev na levi strani, dvojni prijemalni roki). 14-postajna integrirana skladiščna enota za obdelovance. Razširjena skladišče za obdelovance s 20 paletami. Prilagojene čeljusti za prijemalno roko nakladalca. Spremenjena dvižna naprava s senzorjem in napravami za montažo skladišča.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Technical details Turning diameter: 356 mm Turning length: 510 mm Control: M 730 BM Travel path - X: 260 mm Travel path - Y: -50 / +50 mm Travel path - Z: 590 mm Counter spindle travel path (B): 624 mm Bar diameter: 65 mm Main spindle speed: 5000 rpm Gear stages: 2 Drive power: 15 / 11 kW Counter spindle speed range: 6000 rpm Drive power: 11 / 7.5 kW Rapid traverse (X, Y, Z, B): 30/10/30/30 m/min Total power requirement: kVA Machine weight approx.: 6.6 t Space requirement approx.: m Additional information * CNC control Mitsubishi M 730 BM * Main spindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Counter spindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 Ljdpfx Aeyzzi Nol Neaa * 12-position turret, driven tools 10,000 rpm, power 5.5/3.7 kW * Y-axis * C-axis * High/low pressure chucking system for main and counter spindle * High-pressure pump MABEO filter unit with 1.5 MPa * Coolant shower at chuck for main and counter spindle * Coolant shower for machine bed enclosure * Oil mist separator * Hinged belt chip conveyor * Workpiece measuring system Renishaw with optical signal transmission, counter spindle * Cooling of the ball screw on the X-axis * Gantry loader, mounted on the left, 14 station magazine, 20 pallet workpiece magazine, twin gripper belt

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL2561708843, število vreten: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø: 366 Swing diameter over bed mm: ø: 920 Swing diameter over cross slide mm: 740 Bar working capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool holder: BMT40 Max. driven tool speed rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid traverse rate: 30 m/min Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% DC/50% DC/cont) Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25% DC/cont) Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Chip conveyor Signal lamp Ledpjyzxcgjfx Al Nsaa Machine Operating Hours: Power-on hours: 19,393 Cutting time: 8,800 Rated power consumption kVA: 48 Base Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360 The tools shown, driven tools, and both chucks are not included in the scope of delivery.

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Lasdpeyxpv Ssfx Al Nea CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Lasdpfx Aljywtwwe Nja Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 740 mm, premer struženja: 920 mm, moč vretenovega motorja: 18 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, dolžina vretena za rezkanje: 91 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, premer nihanja nad prečnim premičnikom: 740 mm, nos vretena: JIS A2-8, skupna masa: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Turning diameter over bed mm: ø 920 Turning diameter over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed of driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Lajdjwkf H Dopfx Al Nea Work area lighting Dual foot switch for main and sub spindle Coolant gun Touch probe Paper band filter Preparation for robot integration Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220 mm x height 20 mm Max. weight per robot piece: 5.6 kg Machine operating time: Hours powered: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions/Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: rabljeno, Leto izdelave: 2017, Maximalni promjer obrade: 356 mm Dužina obrade: 705 mm Upravljačka jedinica: M730 UM Mapps CELOS Promjer obrtnog kruga iznad ležaja: 920 mm Promjer obrtnog kruga iznad ravne klizne staze: 742 mm Raspon broja obrtaja glavnog vretena: 4.000 min⁻¹ Pogonska snaga glavnog vretena: 18,5 / 15 kW Vretena glava: JIS A2-8 Provrt vretena: 80 (91) mm C-os: 0,001° Raspon broja obrtaja kontravretena: 6.000 min⁻¹ Pogonska snaga kontravretena: 11 / 7,5 kW Provrt kontravretena: 43 mm C-os: 0,001° X-putovanje: 260 mm Z-putovanje: 795 mm Y-os: ±50 mm Brzoposmična os (X / Y / Z): 30 / 10 / 30 m/min Broj pozicija za alat: 12 poz. Visina drške za četvrtasti alat: 25 mm Promjer drške bušilice: 50 mm Vrijeme izmjene pozicije revolvera: 0,27 s Raspon broja obrtaja pogonjenih alata: max. 10.000 min⁻¹ Pogonska snaga pogonjenih alata: 5,5 / 4,2 kW Lsdpoxzk Ifjfx Al Neaa Ukupna priključna snaga: 41 kVA Težina stroja cca. 6,4 t Dimenzije: cca. 4,0 x 3,0 x 2,3 m CNC tokarilica i glodalica DMG MORI - NLX 2500 SY / 700 - Kontravreteno - Pogon alata - C, Y-osa - samo 1.237h rada vretena

Stanje: rabljeno, Leto izdelave: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Lasdpovy Ig Hjfx Al Nja Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore (sub spindle): 43 mm C-axis (sub spindle): 0.001° X travel: 260 mm Z travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y-axis

Stanje: rabljeno, Leto izdelave: 2014, Max. turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Counter spindle nose: JIS A2-5 Counter spindle bearing diameter: 85 mm Counter spindle bore: 43 mm Max. usable bar diameter (counter spindle): (-) mm Chuck diameter (counter spindle): 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool interface: BMT 60 Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total connected load: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI NLX 2500 SY / 700 - Main and counter spindle - C-axis Laedpsu Hq Rlofx Al Noa - Y-axis - Driven tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 4.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL154200702, Origine de fabrication JP Tension 380V/50Hz/3ph Poids net 5400 kg Position douanière 8458.9100 DONNÉES TECHNIQUES Diamètre de tournage max. 350 mm Longueur de tournage 515 mm Laedpfx Alew T Sn Eo Nsa Commande numérique M730UM MAPPS Celos Passage au-dessus du banc 923,8 mm Diamètre de rotation sur chariot 755 mm Diamètre de tournage standard 260 mm Diamètre de barre 34 mm Broche principale : Plage de vitesses - broche 100 - 8 000 tr/min Puissance - moteur de broche 11 / 7,5 kW Axe C 0,001° Diamètre de serrage 210 mm Contre-broche : Vitesse 8 000 tr/min Nez de broche A2-5 Courses des axes : Axe X 260 mm Axe Z 580 mm Axe Y 100 (+/-50) mm Tourelle : Tourelle (stations X) 20 stations Stations motorisées 20 Diamètre de broche 25 mm Vitesse max. outils entraînés 10 000 tr/min Puissance outils entraînés 5,5 / 3,7 kW Avances : Avance rapide axe X 30 m/min Avance rapide axe Z 30 m/min Avance rapide contre-broche 30 m/min Avance rapide axe Y 10 m/min Avance rapide axe C 400 tr/min Puissance totale requise 31 Kva Poids machine env. 5,4 tonnes Dimensions machine env. 4,0 x 3,0 x 3,2 m Sous réserve d’erreurs ou d’omissions – données sans engagement

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V Ledox H Atyspfx Al Neaa - Total power consumption: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status lamp - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measurement probe system - Parts catcher - Parts conveyor - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of static tool holders: 10 - Collet chuck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, proizvajalec krmilnikov: MITSUBISHI, število osi: 3, Ta 3-osni stroj MORI SEIKI NL 2000 SY/500 je bil izdelan leta 2005. Gre za horizontalni stružni stroj z BF-vmesnikom in pogonskimi orodji ter menjalnikom orodij na obeh vretenih. Če iščete visoko kakovostne stružnice in rezkalne stroje, razmislite o stroju MORI SEIKI NL 2000 SY/500, ki ga imamo na voljo za prodajo. Kontaktirajte nas za več informacij. Prednosti stroja Tehnične prednosti stroja • Pogonska orodja so priložena Laedpfx Aleyaim Es Nja • Nastavitev orodij na obeh vretenih Dodatne informacije Stroj je še vedno priključen na električno omrežje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 12.280 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL201FH1430, stružna dolžina: 510 mm, premer struženja: 356 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, TEHNIČNI PODATKI Premer struženja: 356 mm Dolžina struženja: 510 mm Premer izhoda: 755 mm Standardni premer struženja: 275 mm Premer palice: 65 mm Pomik X-osi: 260 mm Pomik Z-osi: 590 mm Pogonska moč vretena: 15 kW Hitrost vretena: 5.000 vrt/min Revolver postaje / z gnano orodje: 12/12 Hitri pomik - vzdolžno/prečno: 30 m/min PODROBNOSTI STROJA Krmiljenje: MSX 850 3 Električni podatki Faze: 3 Frekvenca: 50 Hz Napetost: AC 200 V Nazivni tok: 110 A Ljdsxhf Efspfx Al Nsaa Nazivni tok motorja vretena: 131 A Skupna priključna moč: 32 kW Dimenzije & Teža Potreben prostor: pribl. 2.320 x 1.783 x 1.819 mm Teža stroja: pribl. 5,8 t Delovne ure Ure vretena: 12.280 h Obdelovalne ure: 13.579 h OPREMA Transporter za odrezke Odsesavanje Roka za merjenje orodij Lovilec kosov Dvojno nožno stikalo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7024NL256160890J, največja hitrost vretena: 10.000 obr/min, pomik osi Y: 200 mm, največja hitrost vrtenja: 4.000 obr/min, Premer palice (maks.): 80 mm, razdalja med središči: 700 mm, Condition: Ball screw drives on X, Y, and Z axes new + major maintenance package carried out approx. one year ago (machine has not been in use since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Lodpey A Icrefx Al Njaa Bar diameter: 80 mm Mount: MT5, live center Without center point Turret: 12 stations, bolt-on turret Projection length for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for center point Chip and coolant system Scraper-type chip conveyor with magnetic separation, discharge height approx. 1,000 mm Coolant system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air release system for toolholder sleeves Compressed air release system for tailstock center point Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal light: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for DMG Mori Seiki gantry robot Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without chuck, tool presetter and workholding devices.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.770 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257181158, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, TECHNICAL DETAILS Working Area Swing diameter over bed, max.: 920 mm Swing diameter over cross slide, max.: 742 mm Turning length, max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Sub Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Tool shank cross-section: 25 mm Lodpfx Aey A Nf Iel Neaa Max. speed of driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Sub spindle Main spindle with 10-inch chuck Sub spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, moč vretenovega motorja: 11.000 W, skupna višina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 2.900 mm, število osi: 3, This 3-axis DMG Mori Seiki NLX1500MC/500 horizontal turning center was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret equipped with 12 driven stations, this DMG Mori Seiki NLX1500MC/500 offers an excellent purchasing opportunity. Contact us for further details. • Operating hours: 11,996 • CNC control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Programmable tailstock (B-axis), travel 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status beacon • Air-conditioned electrical cabinet • Condition/Availability: Machine in excellent condition; outstanding appearance; very good; videos available; immediately available Additional equipment • Chip conveyor • Bar loader interface • Bar feeder magazine: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 Ledpfx Asyg Iclsl Noaa • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hex collet: 14 mm • Tool-setting probe arm • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Stanje: rabljeno, Leto izdelave: 2016, Swing diameter: 366 mm Turning length: 700 mm Control: Celos Mitsubishi M730U Swing diameter over bed: 920 mm Swing diameter over cross-slide: 742 mm Max. spindle speed: 4,000 rpm Main spindle drive power: 18.5/18.5/15 kW Max. bar diameter: 80 mm Number of tool stations: 12 positions Tool holder: BMT 80 X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Tailstock quill: MT5 Operating hours: approx. 20,564 h Power-on hours: approx. 28,664 h Machine weight: approx. 4.7 t The machine has been overhauled with the following components: - Ball screws on X, Y and Z axes Lsdpoyvvt Sjfx Al Njaa - New main spindle - Complete maintenance package - Fully re-adjusted and measured As a result, the machine is in an as-new technical condition. There are 2 machines available. Price is per unit. Technical features: - Turret, 12 positions BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Projection length for driven tools: 100 mm - Scraper belt chip conveyor - Coolant system with increased pressure, 5 bar Accessories: - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center tip - Mechanical I/F for oil mist separator, 150 mm - 4-color signal light - EtherNET I/P interface for automation Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and specifications as well as prior sale are subject to change!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 2.139 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257200651, stružna dolžina: 700 mm, premer struženja: 366 mm, moč vretenovega motorja: 19 W, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 91 mm, potovalna razdalja osi X: 260 mm, pomik po osi Z: 795 mm, skupna masa: 5.800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year of manufacture: 2020 Condition: Very good Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine operating hours: 7,598 h Program running time: 2,139 h Details: Base machine NLX 2500 / 700 with driven tools and C-axis Universal 3-axis lathe Turning length: 700 mm Main spindle with integrated spindle motor ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW output (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping devices, see clamping cylinder / chuck C-axis with hydraulic spindle brake 10-position BMT turret 10-position tool drive NC tailstock CELOS® with Mitsubishi control M730UM Control: Control M730UM with CELOS CELOS - ERGOline Touch Spindle: Main spindle (spindle 1) standard Spindle options: Oil blower cooler for circulating coolant Chuck for main spindle: Main spindle (spindle 1) 10" hollow chuck Ø254 mm Main spindle (spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Options for chuck: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-position BMT60 star turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock quill for live center MK 5 (live center not included) Coolant / Chip disposal: Use of water-soluble coolant (emulsion) Hinged belt conveyor, discharge right (500, 700) Coolant system with increased pressure 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Measuring / Monitoring: Manual presetting device (swiveling) (standard) Additional options: Customer supply voltage: 380 V Frequency: 50 Hz Metric settings SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Lodpfx Aeyxglkol Noaa Control options: X-axis direction ISO Last maintenance: April 2024

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 9.100 h, Funkcionalnost: popolnoma funkcionalen, We offer you: CNC Turning and Milling Center Manufacturer: DMG Mori Model: NTX 2000/1500 Year of manufacture: 2019 Control system: DMG Mori Celos with Fanuc F31iB5, Mapps M730UM Technical Specifications: Max. turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: x1 axis: 675 mm y axis: + / - 150 mm z1 axis: 1,562 + 164 mm b axis: + / - 120° a axis: 1,542 mm Main spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Counter spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Milling spindle: Speed range: 0 – 20,000 rpm Tool holder: Capto C6 Number of tool positions: 114 Feed rates: x axis: 50 m/min y axis: 40 m/min z axis: 50 m/min a axis: 36 m/min b axis: 100 rpm Hollow clamping device: Ø 67 mm Operating hours: approx. 9,100 h Spindle hours: approx. 4,600 h Technical features and accessories: - High/low-pressure chucking system for main and counter spindle; programmable, hydraulic 2-stage chuck pressure regulation - 8" hollow chuck Ø210 mm, hydraulic 3-jaw chuck, manufacturer Kitagawa BB208A621, on main and counter spindle, incl. hollow clamping cylinder - Double foot switch with protective cover - B axis with 0.0001° positioning - Tailstock function for the counter spindle - Self-centering hydraulic steady rest, centering diameter 20 – 165 mm, manufacturer SMW SLU-X3.1 - Machine designed for coolant emulsions - Hinge belt chip conveyor - Coolant gun - Coolant shower at the chuck of main and counter spindle - Compressed air blow-off system for chuck at main and counter spindle - Coolant supply through the counter spindle - Oil separator as belt skimmer - IKZ, compact filter unit/paper band filter Knoll KF110/700, 70 bar, tank 700 l - Direct path measuring systems - Spindle sensor measuring system with wireless signal transmission, Renishaw RMP 60 - Automatic tool measuring probe for the turning-milling spindle - EtherNet I/P interface - Electrical I/F for multi-channel bar feeder/ loader; wiring on terminal block - Air filter unit for drying and oil separation - 10 additional M functions - 95 kVA three-phase autotransformer - 3D quickSET - Milling of pockets and islands - Fast fixed cycles - Program restart - Optional program block skip - Workpiece unloader with conveyor belt and collection tray Accessories, shown tools, and clamping devices are only included in the scope of delivery if noted in additional information. Subject to alterations and errors in technical data and specifications, as well as prior sale! Laodeyhdqnspfx Al Noa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Splošni podatki Mere širina 3056 mm Mere dolžina 3994 mm Mere višina 2187 mm Teža stroja 6360 kg Glavni pogon Območje hitrosti vretena 4000 Število osi 5 Pomiki Lasdpfx Aljx D Sc Ns Noa Pomik X-osi 260 mm Hitri pomik X-osi 30000 mm/min Pomik Y-osi ±50 mm Hitri pomik Y-osi 0000 mm/min Pomik Z-osi 795 mm Hitri pomik Z-osi 30000 mm/min Pomik B-osi 734 mm Hitri pomik B-osi 30000 mm/min Obdelovanec Premer nad posteljo 590 mm Premer nad suportom 360 mm Ta 5-osni stružno-rezkalni center MORI SEIKI NLX 2500 SY/700 je bil izdelan leta 2010 ter omogoča maksimalno nihanje obdelovanca nad posteljo 590 mm in dolžino struženja 795 mm. Stroj vključuje Y- in C-os, pomožno vreteno ter visokotlačni hladilni sistem. Namenjen je za obdelavo palic do premera 80 mm, opremljen je z odrezovalnim transporterjem in avtomatskim podajalcem palic. Izkoristite priložnost za nakup tega MORI SEIKI NLX 2500 SY/700 stružno-rezkalnega centra. Kontaktirajte nas za več informacij. Aplikacije Struženje

Stanje: rabljeno, NZX 1500/800SY je CNC stružno-glodalno-bušilni centar visoke preciznosti, velike tačnosti i pouzdanosti. Kapaciteti: 2 stružna vretena, 2 revolvera, prečnik obrtnog kruga 800 mm, maksimalni prečnik struganja 320 mm, maksimalni prečnik šipke 52 mm; hodovi osa Z 810 mm, X 210 mm, Y 110 mm (po klizaču). Tehnički podaci: broj obrtaja 0–6000 min⁻¹, snaga vretena 22/18,5 kW, snaga pogonjenih alata 7,5/5,5 kW, glava vretena JIS A2-5, provrt vretena 61 mm; brzi hodovi X 30 m/min, Z 50 m/min, Y 20 m/min; težina mašine ~8100 kg; dimenzije D4396׊2835×V2320 mm. Oprema: direktni sistem merenja X ose, osvetljenje, uređaj za hlađenje, hlađenje kroz protivvreteno, interfejs za utovarivač, hvatač delova, transportna traka za delove, transporter strugotine. Ostvaruje uske tolerancije; pogodan za autoindustriju, avioindustriju, medicinsku tehniku, časovničarstvo i mašinstvo. Ledpsyxn I Hofx Al Nsaa

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 5.931 h, Funkcionalnost: popolnoma funkcionalen, Prodám velmi udržované CNC soustružnicko-frézovací centrum DMG Mori Seiki NLX 2500MC/700, rok výroby 2013, s řízením Mitsubishi 730 BM. Pouze cca 6 000 provozních hodin! Technická data: CNC řízení: MSX-853 MAPPS IV Pojezdy: - osa X: 260 mm - osa Z: 795 mm Max. průměr soustružení: ø366 mm Max. délka soustružení: 705 mm Laodpfoyq N E Aex Al Noa Průměr tyče: 80 mm Oběžný průměr nad ložem: 787 mm (při kolizi s předním krytem: 586 mm) Oběžný průměr nad příčným suportem: 541 mm Rychloposuv X, Z: 30 m/min Hlavní vřeteno: - Max. otáčky: 4 500 ot./min - Výkon pohonu: 18,5 / 15 kW Koník: - Pojezd koníku: 734 mm - Upínání: MT5 Revolverová hlava: - Počet nástrojů: 12 - Poháněné nástroje: 6 000 ot./min - Výkon pohonu poháněných nástrojů: 5,5 kW - Čas indexace hlavice: 0,27 s Jmenovitý výkon: 32 kVA Půdorys / hmotnost: - Délka stroje: 2 053 mm - Šířka stroje: 3 970 mm - Výška stroje: 1 900 mm - Hmotnost: 6 000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 3.728 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0040001634C, stružna dolžina: 500 mm, premer struženja: 240 mm, moč vretenovega motorja: 1.400 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 6.000 obr/min, izvrtina vretena: 170 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 525 mm, pomik po osi Z: 525 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 22 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 171.192 Nm, sila podajanja os X: 3 N, DMG MORI CTX Alpha 500 je bil izdelan leta 2022. Ta vsestranski stružniški center je opremljen s krmilnikom Siemens in avtomatskim podajalnikom LNZ Quick Load Servo 80S2. Teža: 4.300 kg. Za več informacij o tem stroju nas prosimo kontaktirajte. Lsdpfsyz S T Sex Al Neaa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 14.400 h, moč vretenovega motorja: 13.000 W, največja hitrost vretena: 6.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D with ShopTurn 3G, število osi: 3, This 4-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill center equipped with a Siemens 840D control, ERGOline interface, and CELOS production support. It offers a machining length of 470 mm, a maximum spindle speed of 6,000 rpm, and a Sauter turret with 12 stations and live tooling. Ideal for complex machining tasks. Contact us for more information on this machine. Additional Equipment • CELOS products • DMG MORI Service representatives • DMG MORI NetService • DMG MORI IoT connectivity • DMG MORI Messenger V2 SERVICE camera • Rear stock • 2 SMW-Autoblok BBD17/52 chucks, as shown on the machine • Software supplements (centric turning and milling cycle, as well as a deburring/gearing cycle) Machine Advantages Technical Advantages • Hydraulic cylinder with Ø52 mm through bore • Sauter turret with 12 positions • VDI 30 tool holder (DIN 69880-30) • Interface for driven tools (DIN 5480 standard) • Direct scale on the X axis Lsdpeyz Al Sofx Al Nsaa • Tooling system for turret: trifix® system (DIN 69880, VDI 3425, DIN 5480) • Y-Axis: ±40 mm travel Additional Information Main spindle chuck: SMW-Autoblok BBD 170/52 Sub spindle chuck: SMW-Autoblok BBD 175/52 Sub spindle (option) Programmable tailstock force: adjustable between 80-300 daN Coolant media filtration: dual cartridge filter (50 µm) Coolant cleaning: external flushing system for spindles Coolant tank with 6-bar pump Automation Bar machining package: fully hydraulic cylinder Ø52 mm Part catcher with conveyor for Ø51 × 185 mm parts (max. 3 kg) 4-color status signal light Bar loader interface compatible with IEMCA, Breuning IRCO, LNS

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 925 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 500 mm, premer struženja nad prečnim suportom: 290 mm, premer struženja: 500 mm, največja hitrost vretena: 5.500 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 80 mm, pomik po osi Z: 525 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 22 m/min, hitri pomik na osi Z: 30 m/min, skupna višina: 1.808 mm, skupna dolžina: 4.447 mm, zunanji premer vpenjalne glave: 210 mm, skupna širina: 2.378 mm, premer nihanja nad prečnim premičnikom: 290 mm, nos vretena: FL 140h5, skupna masa: 4.300 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 925 ur vretena, torej praktično kot novo – to zagotovo velja za ta DMG MORI CTX ALPHA 500 V4! Stroj izvira iz prototipnega oddelka, kjer so večinoma obdelovali plastiko. Ljdpjy Duinjfx Al Nsaa Dodatne možnosti in dodatki: - SMW Autoblok 210 BB Ø210mm (vklj. komplet čeljusti) - DMG CELOS programska oprema - Transporter za ostružke - Visokotlačno hlajenje - Nožni pedal za vpenjanje/odvpenjanje vpenjalne glave - Različni držala orodij (pogonjena in statična) - Originalna dokumentacija DMG Teža in dimenzije: 4.300 kg 4447 x 2378 (vklj. PLC) x 1808 mm