Demag Ergotech Systec 280/630-840 nakup rabljenega (6.187)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80400008, vpenjalna sila: 2.800 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, hod izmetalca: 200 mm, odmični hod: 675 mm, Nakladanje stroja je mogoče za doplačilo 500 €! TEHNIČNI PODATKI Zapiralna sila: 2.800 kN Število komponent: 1 Širina vpenjalne plošče: 950 mm Višina vpenjalne plošče: 950 mm Prosta razdalja med stebri, vodoravno: 630 mm Prosta razdalja med stebri, navpično: 630 mm Premer centrirnega obroča: 160 mm Vgradna višina min.: 330 mm Vgradna višina max.: 710 mm Maks. hod odpiranja: 675 mm Maks. hod izmetalnika: 200 mm Maks. teža orodja: 3.700 kg Maks. teža orodja na premični strani: 2.500 kg PODROBNOSTI STROJA Navoj: M20 Premer polža: EE1: 45 mm Maksimalna brizgalna teža PS: EE1: 320 g Razpored agregata: EE1: vodoravno OPREMA 2x vlečenje jedra 6x kaskadno Robot Opomba: Delovne ure so razvidne iz zadnje slike. Njdpozdiyxefx Altscw

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 878 0730, vpenjalna sila: 2.500 kN, razmak između stupova: 630 mm, minimalna višina orodja: 330 mm, izmetalna sila: 69.000 N, hod izmetalca: 200 mm, odmični hod: 675 mm, dolžina plošče: 950 mm, širina plošče: 950 mm, skupna dolžina: 6.500 mm, skupna širina: 1.900 mm, skupna višina: 2.300 mm, skupna masa: 13.100 kg, ogrevalna zmogljivost: 27 kW (36,71 KM), pritisk: 190 letvica, moč črpalke: 4.500 W, moč: 72 kW (97,89 KM), vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vhodni tok: 167 A, Oprema: dokumentacija / priročnik, Technical Specifications – Demag Ergotech 250/630–1450 Ncodpfx Aew Hq Hhjltew Clamping unit Clamping force: 2,500 kN Tie bar spacing (W × D): 630 × 630 mm Max. opening stroke: 675 mm Minimum mould height: 330 mm Maximum mould height (with WA): 710 / 830 mm Platen size (H × V): 950 × 950 mm Max. mould weight: 3,300 kg Max. weight of moving mould half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Shot volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater capacity (cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power supply Pump motor rating: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Max. current consumption: 167 A Dimensions & Weight Total length: 6,500 mm Total width: 1,900 mm Total height: 2,300 mm Net machine weight: 13,100 kg

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 878 40013, vpenjalna sila: 2.500 kN, Popolnoma delujoč stroj. Številni obrabni deli so bili pred kratkim zamenjani. Nedoxtmp Nopfx Altecw

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Nedpfxsy N R Iqe Altscw Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Stanje: rabljeno, Leto izdelave: 2001, Sila stiskanja: pribl. 200 t Komponente: 1 Višina namestitve matrice: pribl. 310 / 760 mm Hod pri odpiranju: pribl. 320 / 575 mm Razdalja med vodilnimi palicami: pribl. 560 × 560 mm Premer horizontalnega vijačnega gredi: pribl. 60 mm Razmerje L/D: 1 / 20 Število izvlečnih jeder: 4 Število con toplotno izoliranega sistema dovodnega kanala: 12 Pretok: pribl. 206 l/min Frekvenca: 50 Hz Napajanje: 3 × 400 V Tlak: pribl. 190 bar Nsdpfx Alszl S U Iotecw Tok 1: 186 A Tok 2: 102 A Tok 3: 84 A Tok 4: 67 A Teža: pribl. 10,1 t

Stanje: rabljeno, Leto izdelave: 2001, Delovni čas: 73075023 Sila stiskanja: približno 200 t Komponente: 2 Višina namestitve matrice: približno 310 / 760 mm Ncsdpfx Aozl S N Eoltjw Hod odpiranja: približno 320 / 575 mm Razdalja med vodilnimi palicami: približno 560 × 560 mm Premer horizontalnega vijaka: približno 60 mm Premer vertikalnega vijaka: približno 30 mm Razmerje L/D: 1 / 20 Izvlečni sistem: 2 Število con za vroče dovajanje: 20 Pretok: približno 190 l/min Frekvenca: 50 Hz Napajanje: 3 × 400 V Tlak: približno 190 bar Tok 1: 214 A Tok 2: 105 A Tok 3: 109 A Tok 4: 67 A Teža: približno 10,8 t

Stanje: rabljeno, Leto izdelave: 2003, Delovni čas: 61303927 Ncsdpfxezl S Hds Altow Sila stiskanja: pribl. 200 t Komponente: 1 Premer vodoravnega vijaka: pribl. 45 mm Število izvlečnih mehanizmov: 2 Število con toplega kanala: 0 Pretok: pribl. 206 l/min Frekvenca: 50 Hz Napajalna napetost: 3 × 400 V Tlak: pribl. 190 bar Tok 1: 189 A Tok 2: 152 A Tok 3: 37 A Teža: pribl. 10,1 t

Stanje: rabljeno, Leto izdelave: 2001, Delovni čas: 193589 Sila zapiranja: pribl. 250 t Komponente: 1 Razdalja med tirnicami: pribl. 840 × 840 mm Premer vodoravnega vijaka: pribl. 45 mm Nsdpozlg N Hjfx Altjcw Število izvlečnih jeder: 2 Število con za vroče kanale: 0 Pretok: pribl. 206 l/min Frekvenca: 50 Hz Napetost: 3 × 400 V Tlak: pribl. 190 bar Tok 1: 139 A Tok 2: 102 A Tok 3: 37 A Tok 4: 67 A Teža: pribl. 10,7 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, leto zadnje generalne obnove: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Machine type: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Distance between horizontal tie bars [mm]: 580 Distance between vertical tie bars [mm]: 580 Min. mould height [mm]: 340 Max. mould height [mm]: 690 Max. opening stroke [mm]: 575 Max. daylight [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control and software version: NC3 Maximum mould weight [kg]: 3300 Screw diameter [mm]: 45 Screw version: 3-zone Screw L/D ratio: 20:1 Screw non-return valve: Yes Ejector system type: Hydraulic Installed heating capacity [kW]: 39 Number of integrated hot runner circuits: 12 Number of electric temperature controllers: 28 Number of cascade controllers: 2 Connection to central drying system: Yes Nsdpfx Alezbg Ezetscw Discharge system available: Yes Number of temperature control units: 3 Max. temperature of temperature control units [°C]: 160 Machine oil capacity [l]: 400 Hydraulic pump motor rated power [kW]: 26

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ Nsdpfxsx D Hnto Altscw 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; Ncedpfx Aex D Nlueltew • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic) Ncodpfxeyfq Alj Altjw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ERGOTECH 200 - 840, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 560 mm, delovna prostornina: 442 cm³, minimalna višina orodja: 340 mm, širina plošče: 860 mm, višina plošče: 860 mm, moč črpalke: 30.000 W, Stroj je popolnoma delujoč, do konca je deloval na brizgalnem stroju. Ncedpfx Aloyxn Tvjtew

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Premer vijaka 2: 22 mm Razdalja med stebri V: 580 mm Nodpfx Alsyz Tmystjcw Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Ncedpeyu R Dzefx Altew Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: dober (rabljeno), Leto izdelave: 1999, Demag Ergotech systems 500/200 Schließkraft 50 t Baujahr 1999 Schnecke 30 mm Ncsdpfx Alsg Emvtotew Schussgewicht ca. 90 g Holmenabstand 355 x 355 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Ncsdpfx Alezc Ndcotsw Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Nodpfezc Nfmsx Altjcw Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7826-1082, Stroj za brizganje plastike | DEMAG Ergotech Extra 35-80 (350 - 80) Zapiralna sila [kN]: 350 Število komponent: 1 Širina zapiralne plošče [mm]: 390 Višina zapiralne plošče [mm]: 390 Učinkovita razdalja med veznimi stebri, vodoravno [mm]: 280 Učinkovita razdalja med veznimi stebri, navpično [mm]: 280 Premer centrirnega obroča [mm]: 110 Minimalna vgradna višina [mm]: 180 Maksimalna vgradna višina [mm]: 350 Maksimalni odprtostni hod [mm]: 350 Maksimalni izmetalni hod [mm]: 100 Navoj [M]: 16 Maksimalna teža orodja [kg]: 310 Maksimalna teža orodja – pomična stran [kg]: 150 Premer polža [mm]: EE1:18 Maksimalna masa brizganja [g] PS: EE1:20 Njdsygh Rvepfx Altscw Razporeditev agregata: EE1: vodoravno Oprema: 2-kratni izvlek jedra, brez robota Ogled je možen kadarkoli po dogovoru. Nakladano franco tovornjak (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAG | Extra35 | Extra3580

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Njdpoyguk Aofx Altscw Clamping force [kN]: 1,250 Number of components: 3 Clamping plate width [mm]: 690 Clamping plate height [mm]: 660 Clear tie bar spacing, horizontal [mm]: 475 Clear tie bar spacing, vertical [mm]: 450 Centering ring diameter [mm]: 125 Minimum installation height [mm]: 230 Maximum installation height [mm]: 560 Maximum opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread [M]: 16 Multi-turntable type: rotary table Turntable diameter [mm]: 700 Turntable thread [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight, moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g], PS: EE1: 63, EE2: 48, EE3: 20 Unit arrangement: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing horizontal [mm]: 470 Clear tie bar spacing vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum daylight opening [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Rotary table type: rotary table Rotary table diameter [mm]: 600 Rotary table thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight moveable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Unit configuration: EE1: horizontal, EE2: vertical Equipment: dual core pull, with robot interface Inspection is possible at any time by appointment. Ncsdsyguhhjpfx Altsw Loaded free onto truck (Butzbach). ----- #Tags: DEMAGergo | Ergotec | Multi110/470

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Demag Ergotech 150-440/610 Schließkraft: 150 t NC 4 Steuerung Schnecke: 40 mm Baujahr: 1997 Holmenabstand: 50 x 50 cm Ncedpfx Aljd N Ux Dstsw Hubvolumen: 255 cm³ Schussgewicht: 230 g

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 58.764 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 502748, vpenjalna sila: 1.000 kN, premer vijaka: 30 mm, razmak između stupova: 420 mm, delovna prostornina: 144 cm³, tlak vbrizgavanja: 1,905 letvica, izmetalna sila: 41 N, hod izmetalca: 150 mm, odmični hod: 500 mm, dolžina plošče: 590 mm, širina plošče: 590 mm, vgradna višina: 250 mm, skupna dolžina: 4.550 mm, skupna širina: 1.450 mm, skupna višina: 2.000 mm, skupna masa: 4.800 kg, ogrevalna zmogljivost: 9 kW (12,24 KM), moč črpalke: 30.000 W, vrsta nastavitve višine: hidravlični, hod: 150 mm, višina orodja: 250 mm, teža orodja: 700.000 g, Oprema: dokumentacija / priročnik, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral devices The injection moulding machine is in good condition and ready for operation. Offered for sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all associated Wittmann peripheral devices can be included for an additional charge. We acquired the Demag ERGOtech in 2020 as part of our company expansion for a customer project and equipped it with appropriate Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and shows no defects. OPTIONALLY, we are also offering all related Wittmann peripheral equipment for sale: Peripheral devices from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: - 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l - 1 pc. Flow measurement – ultrasonic 140–180° - 1 pc. Digital interface 20mA - 1 pc. Packaging for temperature control unit List price: €6,980.00 Sales price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects List price: €4,750.00 Sales price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granulate - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granulate, hinged lid with built-in collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for installation of a separator of the 200 series - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused List price: €8,467.00 Sales price: €4,233.50 All prices are net, plus statutory VAT of 19%. PLEASE NOTE: The offer does not include relocation or transport costs for the machine. These can be offered and organised as an additional service if required. For further questions, please feel free to contact me directly at any time. Nodetltvzepfx Altecw

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 30 mm, Injection moulding machine from Demag, model 80/420-200 System, for sale. Ncsdpfx Aljnfu I Ijtew The machine is in good and fully functional condition. ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance (vertical): 420 mm Tie bar distance (horizontal): 420 mm Platen size (horizontal): 590 mm Platen size (vertical): 600 mm Minimum installation height: 250 mm Maximum platen gap: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Max. mold weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5 x 1.5 x 2 m Weight: 4 t Transport and loading can be organised across Europe at extra cost on request. Prices plus VAT. Inspection possible upon appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet economical metalworking machine for your production? Or would you like to sell yours? For more information or ways to contact us, please visit our website.

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Wittmann | WX142-0325 | 2023 Razno: 1x zaščitni pokrov 1x rokovalni sistem, podjetje Wittmann, serija 9 1x transportni trak z možnostjo menjave zabojev Ncedpfoy N R Uqsx Altow 1x V2A drč za izmet 1x Euromap 12/67 predelava 1x zunanji sistem vročih kanalov, podjetje Mold Masters M1-06-12 (leto izdelave 2016), 12 con 1x transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 196 Tok 2 (A): 110 Tok 3 (A): 86 Tok 4 (A): 67 Teža (t): 9,7 Tlak (bar): 190 Pretok (l/min): 190