Demag Systec 210-580-840 SERVO (2015)

Demag Systec 210-580-840

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. • Integrated country-specific socket combination Lodpfx Aaex D Nluomorp • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm Ljdpfx Aetrya Roamsrp TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Lrjdpjy Hmfyefx Aamep Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 35.000 h, vpenjalna sila: 100 kN, delovna prostornina: 51 cm³, tlak vbrizgavanja: 2.800 letvica, skupna masa: 5.000 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Lrjdpfx Ajwlkb Njamep Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, Demag Systec 100/420-310 (2015) Panel: NC5 Vpenjalna sila: 100 t Lrsdpfxoyg Eu Ss Aamop Premer vijaka: 30 mm Razdalja med stebri V: 420 mm Razdalja med stebri H: 420 mm Tip: Horizontalen Pogon: Hidravličen Morda kupiti Wittmann W818 linearni robot Z = 1500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Ledpfx Aaev Stbmsmsrp Opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Stroke volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing throughput: 83 g/s Nozzle contact force: 173 kN Electrohydraulic Equipment: Rated power of pump motor: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Accessories: Oscillation elements Additional Equipment: - 1 x air valve - 8-way pneumatic cascade control - Accumulator - 2 x hydraulic core pulls on BWAP - 2 x hydraulic core pulls on FWAP - Robot interface according to EUROMAP 67

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7169-2037, Stroj za brizganje plastike (povsem električni) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Zapiralna sila [kN]: 1.000 Število komponent: 1 Širina zapiralne plošče [mm]: 620 Višina zapiralne plošče [mm]: 620 Razdalja med vodili horizontalno [mm]: 470 Razdalja med vodili vertikalno [mm]: 420 Premer centrirnega obroča [mm]: 125 Višina vgradnje min [mm]: 200 Višina vgradnje maks [mm]: 430 Največja odprtina orodja [mm]: 380 Hod izmetača maks [mm]: 115 Navoj [M]: 16 Največja masa orodja [kg]: 780 Največja masa orodja premična stran [kg]: 500 Lodpfeygib Nsx Aamsrp Premer polža [mm]: EE1:35 Največja masa brizga [g] PS: EE1:139 Razpored agregata: EE1: vodoravno Oprema: Pakirna postaja, z robotom Ogled je možen kadarkoli po dogovoru. Prosto naloženo na tovornjak (Butzbach). ----- #Tags: Sumitomodemag | Intelect | 100-470-340

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Lodpfxsymqz Rs Aamorp Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 3.548 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, injekcijska masa: 294 g, skupna masa: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 offers a clamping force of 1600 kN and a tie bar spacing of 520 mm. The machine is equipped with an injection unit with screw diameters of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, you should consider the SUMITOMO SHI DEMAG Systec 160/520-600 we have for sale. Contact us for further details. • Tie bar spacing: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Max. mould weight: 1300 kg • Max. opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm Lrjdpfx Aezbh Epeamsp • Distance between platens: 1085 / 1185 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Lrjdpfx Aszc Nwcoamop Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request