Demag Systec 210-580-840 nakup rabljenega (6.215)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, leto zadnje generalne obnove: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Machine type: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Distance between horizontal tie bars [mm]: 580 Distance between vertical tie bars [mm]: 580 Min. mould height [mm]: 340 Max. mould height [mm]: 690 Max. opening stroke [mm]: 575 Max. daylight [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control and software version: NC3 Maximum mould weight [kg]: 3300 Screw diameter [mm]: 45 Screw version: 3-zone Screw L/D ratio: 20:1 Screw non-return valve: Yes Ejector system type: Hydraulic Installed heating capacity [kW]: 39 Ledpfozbg Ezex Aamsrp Number of integrated hot runner circuits: 12 Number of electric temperature controllers: 28 Number of cascade controllers: 2 Connection to central drying system: Yes Discharge system available: Yes Number of temperature control units: 3 Max. temperature of temperature control units [°C]: 160 Machine oil capacity [l]: 400 Hydraulic pump motor rated power [kW]: 26

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. Ljdpjx D Nlujfx Aamerp • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80400008, vpenjalna sila: 2.800 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, hod izmetalca: 200 mm, odmični hod: 675 mm, Nakladanje stroja je mogoče za doplačilo 500 €! TEHNIČNI PODATKI Zapiralna sila: 2.800 kN Število komponent: 1 Širina vpenjalne plošče: 950 mm Višina vpenjalne plošče: 950 mm Prosta razdalja med stebri, vodoravno: 630 mm Prosta razdalja med stebri, navpično: 630 mm Premer centrirnega obroča: 160 mm Vgradna višina min.: 330 mm Vgradna višina max.: 710 mm Maks. hod odpiranja: 675 mm Maks. hod izmetalnika: 200 mm Maks. teža orodja: 3.700 kg Maks. teža orodja na premični strani: 2.500 kg PODROBNOSTI STROJA Navoj: M20 Lrodpfxjzdiyxj Aamep Premer polža: EE1: 45 mm Maksimalna brizgalna teža PS: EE1: 320 g Razpored agregata: EE1: vodoravno OPREMA 2x vlečenje jedra 6x kaskadno Robot Opomba: Delovne ure so razvidne iz zadnje slike.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Ledpex D Hntsfx Aamsrp Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Stanje: pripravljen za uporabo (rabljen), DEMAG DH2100 H18 - 40t Lsdpfxsy D Iwxo Aamorp

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Lodpfjy N R Iqex Aamjrp Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, 1,0 rabljen stroj za brizgano oblikovanje s robotom Proizvajalec: DEMAG Tip: ET250-840 Concept Letnik proizvodnje: 2004 Zaključna sila: 250 ton Razdalja med stebri: 630 x 630 mm Premer vretena: 60 mm Maksimalna prostornina vretena: 636 cm³ Lsdpfezl Tvgex Aamorp Masa brizganega dela: 579 g/PS Krmilni sistem: NC4 Oprema: Robot, proizvajalec: WITTMANN, tip: W633-931 2 kompleta jedr

Stanje: rabljeno, Leto izdelave: 2001, Sila stiskanja: pribl. 200 t Komponente: 1 Višina namestitve matrice: pribl. 310 / 760 mm Hod pri odpiranju: pribl. 320 / 575 mm Razdalja med vodilnimi palicami: pribl. 560 × 560 mm Premer horizontalnega vijačnega gredi: pribl. 60 mm Razmerje L/D: 1 / 20 Število izvlečnih jeder: 4 Število con toplotno izoliranega sistema dovodnega kanala: 12 Pretok: pribl. 206 l/min Frekvenca: 50 Hz Napajanje: 3 × 400 V Tlak: pribl. 190 bar Tok 1: 186 A Tok 2: 102 A Tok 3: 84 A Lrjdpfozl S U Iox Aamop Tok 4: 67 A Teža: pribl. 10,1 t

Stanje: rabljeno, Leto izdelave: 2001, Delovni čas: 73075023 Sila stiskanja: približno 200 t Komponente: 2 Višina namestitve matrice: približno 310 / 760 mm Hod odpiranja: približno 320 / 575 mm Razdalja med vodilnimi palicami: približno 560 × 560 mm Premer horizontalnega vijaka: približno 60 mm Premer vertikalnega vijaka: približno 30 mm Razmerje L/D: 1 / 20 Lrodezl S N Eepfx Aamjp Izvlečni sistem: 2 Število con za vroče dovajanje: 20 Pretok: približno 190 l/min Frekvenca: 50 Hz Napajanje: 3 × 400 V Tlak: približno 190 bar Tok 1: 214 A Tok 2: 105 A Tok 3: 109 A Tok 4: 67 A Teža: približno 10,8 t

Stanje: rabljeno, Leto izdelave: 2003, Delovni čas: 61303927 Sila stiskanja: pribl. 200 t Komponente: 1 Premer vodoravnega vijaka: pribl. 45 mm Lrsdpozl S Hdjfx Aamep Število izvlečnih mehanizmov: 2 Število con toplega kanala: 0 Pretok: pribl. 206 l/min Frekvenca: 50 Hz Napajalna napetost: 3 × 400 V Tlak: pribl. 190 bar Tok 1: 189 A Tok 2: 152 A Tok 3: 37 A Teža: pribl. 10,1 t

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Proizvajalec: Demag, Sumitomo Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Ledpjx Sqi Hofx Aamsrp Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)

Stanje: rabljeno, Leto izdelave: 2001, Delovni čas: 193589 Lodpfx Aaszlg N Hjmjrp Sila zapiranja: pribl. 250 t Komponente: 1 Razdalja med tirnicami: pribl. 840 × 840 mm Premer vodoravnega vijaka: pribl. 45 mm Število izvlečnih jeder: 2 Število con za vroče kanale: 0 Pretok: pribl. 206 l/min Frekvenca: 50 Hz Napetost: 3 × 400 V Tlak: pribl. 190 bar Tok 1: 139 A Tok 2: 102 A Tok 3: 37 A Tok 4: 67 A Teža: pribl. 10,7 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, Demag Systec 100/420-310 (2015) Panel: NC5 Vpenjalna sila: 100 t Premer vijaka: 30 mm Razdalja med stebri V: 420 mm Razdalja med stebri H: 420 mm Tip: Horizontalen Pogon: Hidravličen Lrjdjyg Eu Sepfx Aamsp Morda kupiti Wittmann W818 linearni robot Z = 1500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Lodpfszc Nv Esx Aamerp Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, protective enclosure Robot available for additional price Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Lredpfxozc Nwce Aamjp Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, vpenjalna sila: 3.500 kN, premer vijaka: 60 mm, razmak između stupova: 720 mm, delovna prostornina: 763 cm³, tlak vbrizgavanja: 1.905 letvica, injekcijska masa: 695 g, minimalna višina orodja: 350 mm, Osnovni podatki Model: Brizgalna enota 1450 / Zapiralna sila 350 t Leto izdelave: 2013 Krmiljenje: NC5 Brizgalna enota Premer polža: 60 mm Prostornina brizganja: 763 cm³ Teža brizga: 695 g Specifičen tlak brizganja: 1905 bar Razmerje L/D polža: 20 Zapiralna enota Zapiralna sila: 350 t Dimenzije orodnih plošč: 1040 × 1060 mm Svetla razdalja med stebri: 720 × 720 mm Višina orodja: 350–745 mm Odpiralni hod: 730 mm Ledpfszl D Erox Aamerp Maksimalna razdalja med ploščami: 1475 mm Hod izmetalca: 200 mm Dimenzije in masa Dimenzije (d × š × v): 7,64 × 2,01 × 2,27 m Teža: 15.540 kg Orodja in oprema 4 × hidravlično jedro 12 ogrevalnih con orodja 2-krožno pnevmatsko kaskadno upravljanje Hitre spojke Indunorm 2 pnevmatska ventila na gibljivi plošči Povečana moč pogona črpalke activeDrive – črpalka z regulacijo obratov activeProtect – aktivna zaščita orodja Polž, odporen na obrabo Bimetalni valj Brizganje z regulacijsko črpalko p+v (zaprta zanka) Robotski vmesnik EUROMAP 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Vpenjalna sila: 650 t Premer polža: 60 mm Razdalja med vodili V: 1020 mm Razdalja med vodili H: 1020 mm Tip: Horizontalen Lrodpsyzylvjfx Aamsp Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 3.548 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, injekcijska masa: 294 g, skupna masa: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 offers a clamping force of 1600 kN and a tie bar spacing of 520 mm. The machine is equipped with an injection unit with screw diameters of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, you should consider the SUMITOMO SHI DEMAG Systec 160/520-600 we have for sale. Contact us for further details. Lrjdpfx Aozbh Epoamjp • Tie bar spacing: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Max. mould weight: 1300 kg • Max. opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7363-0044, Plastová vstřikovací lis | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Uzavírací síla [kN]: 1 000 Počet komponentů: 1 Šířka upínací desky [mm]: 600 Výška upínací desky [mm]: 600 Světlá vzdálenost mezi táhly vodorovně [mm]: 420 Světlá vzdálenost mezi táhly svisle [mm]: 420 Průměr centrovacího kroužku [mm]: 125 Minimální instalační výška [mm]: 250 Maximální instalační výška [mm]: 500 Maximální otevření [mm]: 500 Maximální zdvih vyhazovače [mm]: 150 Závit [M]: 16 Maximální hmotnost formy [kg]: 780 Maximální hmotnost formy na pohyblivé straně [kg]: 500 Průměr šneku [mm]: EE1:35 Maximální dávka vstřiku [g] PS: EE1:149 Uspořádání agregátu: EE1: horizontální Lsdpfx Aaoygiafsmorp Výbava: 1x jádrový tah, balicí stanice, s robotem Prohlídka je možná kdykoli po dohodě. Volně naložený na kamion (Butzbach).

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 500 kN, Demag Systec 50/370-120 (2008) Lodpfx Aasy Eyq Hsmerp

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag ergotech sys 50-200 (1992) Lrsdpfx Ajyyztfjamop

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, holding force: 2200 kN, max. opening stroke: 570 mm, min. mould installation height: 310 mm, max. mould installation height: 660 mm, max. distance between platen faces: 1230 mm, platen dimensions: 830 x 830 mm, clear tie bar distance: 560 x 560 mm, max. mould weight: 3.3 t, max. weight on moving platen: 1.7 t, max. weight on fixed platen: 2.5 t, ejector stroke: 180 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 45 mm, L/D ratio: 20, injection pressure at 400°C: 2402 bar, shot volume: 358 cm³, shot weight (PS): 330 g, max. dosing stroke: 225 mm, max. nozzle stroke: 400 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 80 kN, installed cylinder heating: 13 kW, material hopper capacity: 70 l, oil tank capacity: 500 l, screw drive: 32 kW, clamping unit drive: 32 kW, pump unit power: 15 kW, total installed power: 92 kW, continuous sound pressure level: 74 dB(A), length: 5700 mm, width: 1700 mm, height: 2200 mm, weight: 11 t, SPS operating hours: 36,734 h, cylinder heating: 25,665 h, pump: 18,222 h, documentation available. An on-site inspection is possible. A Wittmann robot cell is optionally available. Lrjdpfx Asy Tx Rboamjp

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 350 t Platen dimensions: 1040 x 950 mm Tie bar spacing: 710 x 630 mm Screw diameter: 50 mm Lrodpfxjva Ht Sj Aamjp Shot weight: 400 g Shot volume: 442 cm³ Design: Horizontal Drive type: Hydraulic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm Lrjdpfx Aasyfq Alomsp • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ERGOTECH 200 - 840, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 560 mm, delovna prostornina: 442 cm³, minimalna višina orodja: 340 mm, širina plošče: 860 mm, višina plošče: 860 mm, moč črpalke: 30.000 W, Stroj je popolnoma delujoč, do konca je deloval na brizgalnem stroju. Lodpfjyxn Tvjx Aamorp