Stroj za brizganje

Demag Ergotech Extra 35-80

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Kjdpfjthd Shex Adkjdi Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Kdedpfx Adju E E Suskji Tie bar spacing: 420 x 420 mm Min./max. mould installation height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Injection moulded part weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Injection moulded part weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year: 2010 - Conveyor belt - Safety fence

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal Kdsdpfxop Audqe Adkei INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) Kedjg Ey Ufepfx Adkjdi - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Max. air flow: 840 m³/h Connection diameter: 200 mm Drive power: 0.55 kW Very lightly used, 2 units available Kdsdpfx Adswmlgcjkji

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass Kjdpfx Adeddv Itoksdi - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Vi har nu 13 SSI Schaefer SLL LogiMat vertikala lyftmoduler från 2019 till salu. Dessa maskiner är i mycket gott skick och har servats årligen av tillverkaren sedan de installerades. Tack vare regelbundet underhåll och varsam användning är maskinerna fortfarande mycket driftsäkra. Dessa vertikala lyftmoduler är utformade för att ge maximal lagringskapacitet på minimal yta. Brickstorlek: 4 025 mm bred × 815 mm djup Brickyta: Cirka 3,3 m² Antal brickor per maskin: Cirka 49 Total lagringsyta per maskin: Cirka 160 m² Upptagen golvyta per maskin: Endast 14,12 m² Varje maskin är utrustad med en valfri ljuspekare, som tydligt visar plockpositionen. Det här ökar både hastigheten och säkerheten vid orderplockning. För att använda ljuspekaren krävs anslutning till ERP- eller WMS-system. Maskinerna har endast kört cirka 30 000–60 000 cykler vardera – vilket motsvarar ungefär 1 till 2 års normal användning. Maskinernas höjd är 8 200 mm men de kan anpassas till ert lagertaks höjd vid installationen. Specifikationer – SSI Schäfer LogiMat SLL vertikal lyftmodul Kodpowi Iywefx Adksdi Tillverkare: SSI Schäfer Modell: LogiMat SLL 4025-815-8200/400 Tillverkningsår: 2019 Skick: Mycket bra – årligen servad av tillverkaren Antal enheter: 13 Höjd: 8 200 mm Bredd (maskin/brickor): 4 570 mm / 4 025 mm Djup (maskin/brickor): 3 092 mm / 815 mm Upptagen golvyta per enhet: 14,12 m² Antal brickor per enhet: Ca 49

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.108 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, premer vijaka: 25 mm, delovna prostornina: 79 cm³, tlak vbrizgavanja: 2.398 letvica, izmetalna sila: 6.100 N, hod izmetalca: 100 mm, odmični hod: 606 mm, dolžina plošče: 750 mm, širina plošče: 850 mm, skupna masa: 10.600 kg, Oprema: dokumentacija / priročnik, Tehnične podrobnosti Proizvajalec: Engel Model: V 330H/80V/130 Combi Cleanroom Leto izdelave: 2006 Obratovalne ure: 33.107 h Polži: 25/22 mm Teža stroja: 10.600 kg Vključena dodatna oprema: Robot GEKU SR 500 ST Kjdpfxjt A Ui Aj Adksdi Zaščitna kletka Vrtljiva miza Stroj je deloval približno 33.107 ur v avtomatskem načinu.

Leto izdelave: 2022, stanje: novo, - Discharge: 500 mm - Elevator belt: 1300 mm - Infeed: 600 mm - Usable width: 350 mm / Total width: 405 mm - Discharge height: min. 700 mm, max. 1000 mm - Cleats: 30 mm high (from a usable width of 350 mm, the cleats are split in the middle) - Cleat spacing: 500 mm Available on request: - Special dimensions Ksdpjf U Eu Hefx Adksdi - Cycle control - Frequency converter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Technical Details Kdsdorxtpdepfx Adksi CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar