Datalogic Powerscan Pm9501 nakup rabljenega (24)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Wireless Barcode Scanner - Reader Manufacturer: Datalogic Model: Powerscan PM 9501 Type: 433MHzRB Weight: 445 g Accessories: Base Station Charger Wall Mount Replaceable Battery We have 45 units available! FEATURES • Powerful liquid lens enables the model to read standard, wide, and high-density codes. • Fast omnidirectional reading • Intuitive aiming system • Soft white illumination • Bluetooth 3.0 compatible: Class 1; piconet supports up to 7 scanners connected to the same base station • Ethernet connectivity (standard and industrial) • Lithium-ion battery can be replaced in just 3 seconds! • Datalogic Motionix™ motion sensing technology • Ergonomic design allows for hours of fatigue-free data collection • Image capture capability • Datalogic 3GL™ (Three Green Lights) technology and a loud beeper for reading confirmation • Water and particle resistance: IP65 Fgjdpfxjv Urv Ie Ad Isg • Field-replaceable window and charging contacts • EASEOFCARE service plans offer a broad range of service options to protect your investment and maximize productivity and ROI

Stanje: rabljeno, Powerscan PD9530 ročni čitalec Fedpfxozdahbo Ad Ijgg Robusten industrijski čitalnik črtnih kod za uporabo v proizvodnji, skladišču, odpremi in logistiki. Primeren za zajem 1D in 2D kod. Proizvajalec: Datalogic Serija: PowerScan 9500 Tip: PD9530 Model: PowerScan PD9530 Tehnologija skeniranja: Area Imager Podprte kode: 1D in 2D črtne kode Napajalna napetost: 10–30 V DC Poraba toka: maks. 300 mA Stanje: rabljeno Na voljo: 4 kos

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) Fedpfowbg Drox Ad Iegg FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focusing system for extended depth of field • Continuous, flicker-free white illumination • Region-of-interest windowing for increased frame rate • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabit Ethernet and SyncNet high-speed connectivity • PackTrack feature for reduced item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic’s patented “Green Spot” technology for visual read confirmation • Dual laser aimer for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50 °C Communication Interfaces: 2 Ethernet TCP/IP ports, 2 serial ports Internal Communication Interfaces System: SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, image capture at 32 frames per second, dynamic or adjustable focus, and a range of lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Stanje: skoraj kot novo (rabljeno), 5 kosov varnostnih svetlobnih pregrad Svetlobne pregrade Proizvajalec: Datalogic Automation S.r.l. Serija: SG4 Base Tip: SG4-30-120-OO-X Stopnja zaščite: IP65 Fgjdezrfp Sjpfx Ad Iog Napajanje: 24 V DC ±20 % Domet: do 20 m Ločljivost: 30 mm Višina zaščitnega polja: približno 1.200 mm (oznaka tipa „120“) Standardi/certifikati: CE, UL

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 494 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 27026757, vrsta vhodnega toka: trifazni, skupna višina: 510 mm, skupna širina: 300 mm, skupna dolžina: 706 mm, vhodna napetost: 400 V, dolžina ozemljitvenega kabla: 5.000 mm, skupna masa: 100 kg, vrsta hlajenja: voda, dolžina paketa cevi: 1.200 mm, električna varovalka: 35 A, napetost odprtega kroga: 73 V, varilni tok pri 60% delovnega cikla: 360 A, varilni tok pri 100% delovnem ciklu: 320 A, vhodni tok: 26 A, vrsta zaščite (IP koda): IP23, varilni tok (min.): 3 A, varilni tok (maks.): 400 A, vhodna frekvenca: 60 Hz, Oprema: Na voljo je tipska ploščica, Fronius TPS 400i Pulse – profesionalna varilna naprava MIG/MAG, kompletna z dodatno opremo Naprodaj: profesionalna varilna naprava Fronius TPS 400i Pulse MIG/MAG, kompletna z napravo za podajanje žice, mobilnim podstavkom in obsežnim naborom dodatne opreme. Fronius TPS 400i Pulse je profesionalna varilna naprava, primerna za različne aplikacije MIG/MAG varjenja. Naprava ima, med drugim, funkcijo pulznega varjenja in možnost beleženja varilnih podatkov (datalogging). Ta funkcija beleženja podatkov je vgrajena v varilno napravo in ni ločena dodatna oprema. Vključeno v komplet: - Fronius TPS 400i Pulse - Naprava za podajanje žice Fronius, brez podstavka - Robusten mobilni podstavek za varilno napravo - 1,2-metrska povezovalna enota, trenutno priključena - 20-metrska povezovalna enota, dodatno priložena - 8-metrska varilna pištola Push/Pull - Momentni izvijač Wera, za pravilno privijanje valjev za podajanje žice push/pull - Škatla z različnimi nadomestnimi deli, vključno s kontaktnimi konicami, šobami za plin in drugo dodatno opremo - Masivni kabel z varilno sponko - Povezovalni kabli in drugi kabli/cevi - Druga dodatna oprema, kot je prikazano na fotografijah - Navodila za uporabo, na voljo v digitalni obliki Fgedpfx Adezwhpre Ieg Vsestranska profesionalna varilna naprava Kombinacija 1,2-metrske povezovalne enote, priložene 20-metrske povezovalne enote in 8-metrske varilne pištole Push/Pull omogoča izjemno široko uporabo te varilne naprave, na primer za varjenje aluminija in pri večjih konstrukcijah ali izdelkih, kjer varilna naprava ne more biti neposredno ob izdelku. Komplet ponuja veliko prilagodljivost. Vgrajena funkcija beleženja varilnih podatkov (datalogging) je zanimiva za profesionalne uporabnike, ki cenijo nadzor procesa, nadzor kakovosti in sledljivost varilnih del. Naprava je rabljena in ima običajne znake uporabe, vendar je v dobrem in solidnem stanju. Prodaja se kot celoten komplet, kot je prikazano na fotografijah. Ogled in testiranje sta možna po dogovoru. Samo osebni prevzem, pošiljanje ni možno. Na voljo je viličar.

Leto izdelave: 2015, stanje: rabljeno, DATALOGIC Blagajniški sistem Magellan 9800i z Bizerba tehtnico CS 300 MA 9803 Blagajna s skenerjem Proizvajalec: MAGELLAN Model: različni Letnik proizvodnje: od 2015 Oznaka: blagajniški sistem Teža: ca. 8 kg (z napajalnim kablom) Priklop naj opravi strokovnjak Cena pri prevzemu iz skladišča 47441 Moers Stroški embalaže in pošiljanja neto 29,-€ Trenutno na zalogi 10 kosov. Dodatna vprašanja po telefonu ali na kraju samem. Vse ponudbe iz skladišča 47441 Moers. Vse mere so približne Fsdpfey I T Dlex Ad Ijgg (Fotografije so simbolične)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Naprodaj je CMC 250 turbocode vstavljalnik! Proizveden leta 2014. Število delovanj na števecu: le 7 milijonov! 16.000 ovojnic na uro. 60.000 listov A4 na uro. 2 rotacijska podajalnika s kamerami. Dvo-kanalni sistem. Brez iglic. Odvitje materiala Hunkeler UW6. Rezalniki Tecnau. Sistem za odvajanje odpadkov Tecnau. Sistem za preverjanje celovitosti na podlagi datotek s kamerami Datalogic. Sistem za tiskanje naslovov. Sistem za nalepke. Fgjdpfx Aozza H Rod Ieg Oglejte si video in fotografije!

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Fgjdjzikb Uepfx Ad Ieg Number of Installed Tunings: 1 Typical Tuning: Fast Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electronics / Control Control: Galvanometer scanner with digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostic Features: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Fgjdpfx Ajzikcfod Iog Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electronics / Control Control: Galvanometer scanner with digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostic Features: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, številka stroja/vozila: 0-250-11-2627, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 29 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, dolžina obdelovanca (maks.): 3.050 mm, širina obdelovanca (maks.): 1.250 mm, višina obdelovanca (maks.): 80 mm, teža obdelovanca (maks.): 60 kg, število osi: 3, skupna višina: 2.500 mm, skupna dolžina: 2.500 mm, skupna masa: 3.200 kg, širina mize: 4.740 mm, Oprema: CE označba, dokumentacija / priročnik, HOMAG / WEEKE OPTIMAT BHX 200 CNC – leto proizvodnje 2016 – HSK63 9 kW – Clamex-P – samodejna menjava orodja – izjemno obsežna oprema Naprodaj je naš vertikalni CNC obdelovalni center HOMAG / WEEKE OPTIMAT BHX 200, leto proizvodnje 2016. Stroj smo kupili neposredno od podjetja HOMAG Polska leta 2018. Pred nakupom je bil stroj predstavljen na sejmu v Nemčiji. Tam je bil razstavljen z izjemno obsežno opremo, kar je bil za nas eden glavnih razlogov za nakup. Sprva je bil načrt, da bomo BHX 200 v okviru nadaljnje avtomatizacije naše proizvodnje povezali z industrijskim robotom. Za to naložbo na koncu nismo prejeli evropskih nepovratnih sredstev. Hkrati naš trenutni obseg proizvodnje ni dovolj velik, da bi v celoti izkoristili potencial tega stroja. To je razvidno tudi iz razmeroma nizkega števila delovnih ur. Zato smo se odločili, da ga prodamo. BHX 200 nam je leta služil zelo zanesljivo in še danes je v tekoči proizvodnji. Na njem izdelujemo dele pohištva iz ploščatih materialov. Stroj deluje zelo natančno in zanesljivo ter je odličen za fleksibilno proizvodnjo pohištva. Ne gre za navaden BHX 200 v osnovni izvedbi. Stroj ima zelo obsežno konfiguracijo za vrtanje, frezanje, reže in obdelavo okov. Oprema: * vertikalna vrtalna glava V15 High Speed z 15 posamično upravljanimi vretenci * 6 horizontalnih vreten za vrtanje v smeri X * 4 horizontalna vretenca za vrtanje v smeri Y * dodatna vertikalna 3-vretenska vrtalna glava za okovje * HSK63 vreteno za frezanje * moč do 7,5 / 9 kW * območje vrtljajev 1.250–24.000 vrt/min * samodejna menjava orodja * samodejno podajalno orodno skladišče s 4 mesti za orodja ali nastavke HSK63 * poseben nastavek za Lamello Clamex-P * nastavek za reže v smeri X in Y * optični nadzor obdelovanca v smeri X in Y * samodejno nastavljeni objemni elementi za obdelovance * samodejna nastavitev na debelino obdelovanca * integriran 1D/2D sistem črtnih kod, vključno z brezžičnim bralnikom črtnih kod Datalogic in osnovno postajo Dimenzije obdelovanca: Dolžina: 200–3.050 mm Širina: 50–1.250 mm Debelina: 8–80 mm Največja teža obdelovanca: 60 kg Upravljanje in programska oprema: * HOMAG powerControl / powerTouch * 21,5" Full-HD zaslon na dotik * woodWOP * uvoz datotek DXF (osnovna različica) * baza podatkov za orodja Fgedpfxjzzxzms Ad Iog * upravljanje proizvodnih seznamov * woodScan * Ethernet * UPS * ECO Plus * klimatska naprava za omarico upravljanja Posebna prednost tega stroja je njegova vsestranskost. Še posebej je primeren za proizvajalce, ki proizvajajo veliko različnih vrst pohištva, različnih dimenzij ter male in srednje serije. Zaradi kombinacije vertikalnega in horizontalnega vrtanja, frezanja, reže, obdelave Clamex-P in samodejne menjave orodja je mogoče izvesti zelo veliko obdelav na enem stroju. Stroj je takoj na voljo. Prepričani smo v njegovo zelo dobro tehnično stanje. Še danes ga uporabljamo v naši proizvodnji. Po dogovoru je možen ogled stroja in demonstracija delovanja. Lokacija: Białystok, Poljska.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Linija za sestavljanje in testiranje elektromotorjev za električna vozila (2021) Zasnovana za proizvodnjo elektromotorjev za EV v razponu moči 180–300 kW Vključuje ročne, pol-avtomatske in avtomatizirane operacije Cikel časa: 86s Fjdezhub Aspfx Ad Ijgg Postaje in oprema Nakladanje komponent - KUKA KR15 R2700-2/FLR robot (2021) - Dovod materiala - Segrevanje notranjega ohišja z indukcijsko tuljavo do 240 °C - Vtis statorja v ohišje - 1T TOX stiskalnica - Keyence CA-DQP25X - Hladilni tunel - Ohladitev na 24 °C - Cikel časa: 600 s Sestava X-tesnila in D-tesnila v notranje ohišje - Vstavljanje X-tesnila in D-tesnila v ohišje - Posebno orodje za okroglo montažo Predsestava zunanjega ohišja - Privijanje prirobnice v ohišje z Bosch Rexroth ESA013G-G0 vijačnikom - Avtomatsko združevanje notranjega in zunanjega ohišja Sestava zunanjega ohišja - 3T TOX EQK 030 stiskalnica - 2x Cognex skenerja - 2x Keyence kamera V3 - 3x VS kamere Magnetizacija in merjenje rotorja - Magnetizacija magnetov - MagSys magnetizer MC3K82 (2020) - Pripomoček za magnetizacijo MFFer8/160/250 Predsestava A-ščita in vstavitev rotorja - Tisnjenje ležaja rotorja in resolverja - 3T TOX stiskalnica Vgradnja A-ščita v zunanje ohišje - 1T TOX EQK stiskalnica - Vijačenje A-ščita v zunanje ohišje s pnevmatskim vijačnikom (5 Nm) Pritrditev nameščenih komponent - Pritrditev z 4GE59 Rexroth vijačnikom - Manipulacijski sistem Handyflex 400 Povezava inter-connectorja - Ročna montaža inter-connectorja in izolacijske cevi Vgradnja protizanke, pokrova hlajenja in sestava prezračevalnika - 3T TOX EQK 030 stiskalnica Montaža pokrova hlajenja rotorja - Vijčenje z 4 Nm Testna zanka električnega testiranja (EOL) - 5x Deutronic testerjev, vključno z: - ETL ATS 400 visokonapetostni testerji - HIOKI RM3545 testerji upornosti - Reilhofer EOL analizatorji Postaja za odklop inter-connectorja - Odklop inter-connectorja - Vstavljanje 2 vijakov in vijačenje z Rexroth vijačnikom (13 Nm) - Manipulacijski sistem Handyflex 300 - Kontrola podložke - Rotacija motorja Testiranje puščanja - 2x Postaji za testiranje puščanja z Innomatec LTC-902 testerji - Testi z vakuumom in nadtlakom - Testirana količina: cca 50.000 kosov na postajo Rotacija, lasersko označevanje, štancanje, graviranje in pregled - ADT stiskalnica za označevanje - Arex Laser 450 - Keyence CA-H sistem kamer - Datalogic CBX 100 čitalnik - Testirana količina: cca 130.000 kosov Zaščita med transportom - Rumena transportna zaščitna kapica in sestava čepov - Ročno vstavljanje kapic in varovanje odprtin Pakiranje in končna kontrola - Dalmec manipulator (2022)

Stanje: pripravljen za uporabo (rabljen), Datalogic DS 350 A / DS350A T3-F2-8/DM - DS350A T3-F2-8 / DM barcode scanner with oscillating mirror, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Fedei D Un Aopfx Ad Ijgg

Stanje: dober (rabljeno), Leto izdelave: 1999, Positionserkennungsscanner, Laser-Barcodescanner - 10–30 V DC - Modell: DS2100 Fgjdpfxeb A N T No Ad Ijg - Modell: PG220 - Gewicht: 2 kg

Stanje: novo, Datalogic Matrix 200 213-101 / WVGA-FAR-25P-ES Compact 2D Imager, serial number as per photo, unused in opened original packaging, 100% fully functional, scope of delivery as shown in photos Fgedpfx Aji D Un Hjd Iog

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request Fjdpfx Ajyzt D Eod Iegg The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 0-201-50-1289, obratovalne ure: 7.062 h, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, model krmilnika: POWERCONTROL PC 85, višina plošče: 300 mm, največja hitrost vretena: 24.000 obr/min, CNC machining center for milling, drilling, and edge banding! The machine must be collected between 10.06.26 and 30.06.26! TECHNICAL DETAILS Working range X-axis: 6,000 mm Working range Y-axis: 1,400 mm Maximum panel pass-through height: 300 mm Travel speed X-axis: 80 m/min Fjdpfx Ajy Uviwjd Iegg Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of work zones: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Worktable and Workpiece Clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h NC positioning Vacuum cups for workpiece clamping NC positioning of vacuum cups Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes, milling spindle 1: 5 Motor power, milling spindle 1: 15 kW Spindle speed, milling spindle 1: 24,000 rpm Automatic tool changer Milling spindle 2: Top Number of controlled axes, milling spindle 2: 4 Automatic tool changer, milling spindle 2: Yes Motor power, milling spindle 2: 11 kW Spindle speed, milling spindle 2: 12,000 rpm Edge banding unit Number of edging units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main machine beam Number of edge roll magazine positions: 2 Gluing unit Glue pot for hot-melt adhesive Hot-melt pre-melter Tool magazines Number of tool magazines: 4 Positions in tool magazine 1: 72 Location tool magazine 1: Rear of the machine Positions in tool magazine 2: 2 Location tool magazine 2: Rear of the machine Positions in tool magazine 3: 2 Location tool magazine 3: Rear of the machine Positions in tool magazine 4: 1 Use for tool magazine 4: Only for saw unit D:350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Pod and rail worktable NC-positioned workpiece clamping Vacuum cups Vacuum pump Top drilling unit 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot-melt adhesive Hot-melt pre-melter Edge roll magazine 4 tool magazines DATALOGIC barcode reader Protective net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal state ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for the installation, securing, and use of the machine at the destination. External reference: 8527

Stanje: novo, stiskalna sila: 280 t, 280 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly attractive price as the machine is already in production and the original customer has withdrawn from the order for two identical units. This provides the opportunity to acquire a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown display similar machines built at the plant and serve as sample images. Technical Data & Information: ==== General Specifications Pressing force: 280 t Design: Servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guide system: 4 column guides Clear distance between columns: 1,250 mm Stroke of cylinder: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping and heating plates: 900 mm Overall height approx.: 3,500 mm Width approx. with control cabinet: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Fedpfxjyynalo Ad Iogg Pump output: 72 l/min Motor power: 10 kW Servo-hydraulics: included Control: Siemens S7-1200 with Siemens touchscreen display MTP 1000 Programming: up to 50 programs Travel measurement: Encoder Pressure measurement: Data acquisition ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure hold function up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heater rod control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Travel limit via Leuze measuring rod and monitor Two-hand operation Ram return via control button Safety light curtains front and rear up to 2,500 mm height CE certificate and operator manual included Control cabinet with Siemens components Safety technology by Sick / Pilz / Keyence / Datalogic ==== Included Additional Equipment 40 mm thick base plate with beveled ramp 4 vibration damping pads Energy-efficient servo hydraulics Applications: Heated presses, compression molding, presses with temperature-controlled process, plastics processing, composites, technical molded parts, laminating processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, forming press, press with heating plates, industrial machine, special purpose machine, tool matching press, tryout press, tool tryout press

Stanje: novo, stiskalna sila: 1.100 t, 1100 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly favorable price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This creates an opportunity to acquire a high-quality servo-hydraulic double-column press with heating plates on attractive terms and with a comparatively short delivery time. The photos shown display similar, already manufactured machines from our production and serve as sample images. Fsdpfjyyna Sex Ad Iegg Technical Data & Information: ==== General Specifications Pressing force: 1,100 t Design: Servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides (Ø 150 mm) Clear width between uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 1,000 mm Overall height approx.: 4,600 mm Width approx. with control cabinet: 3,250 mm Depth approx.: 1,700 mm Weight approx.: 41,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,600 × 1,100 mm Ram with T-slots: 1,500 × 1,100 mm Heating plate: 1,100 × 1,100 × 140 mm ==== Speeds Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Bosch Rexroth / Baumüller / Servo Pump capacity: 240 l/min Motor power: 32 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens Touchscreen Display MTP 1000 Programming: up to 50 programs Position measurement: Encoder Pressure measurement: Data logging ==== Equipment Digital control for stroke, pressure, speed, and switching positions Passive pressure hold up to 15 minutes Heated plates electrically heated up to 250 °C Heating capacity: 60 kW Temperature monitoring and heating rod control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Travel limitation via Leuze measuring rod and monitor Two-hand operation Ram return via control button Light curtain safety at front and rear up to 1,900 mm height CE certificate and user manual included Control cabinet with Siemens components Safety technology by Sick / Pilz / Keyence / Datalogic ==== Additional Included Equipment 40 mm thick base plate with beveled ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, laminating processes, industrial high-volume manufacturing, special purpose machinery Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression press, press with heating plates, industrial machinery, special purpose machine, tool tryout press, tryout press, tool try out press

Stanje: dober (rabljeno), Position scanner, laser, barcode scanner Fgodpjb A Spgjfx Ad Ijg - Model: LS50HR3 - Voltage: 4.75–28 VDC - Price: per unit - Quantity: 2 available - Weight: 0.7 kg

Leto izdelave: 2006, stanje: rabljeno, največja debelina roba: 12 mm, hitrost pomika os X: 40 m/min, višina plošče: 60 mm, dolžina plošče: 2.400 mm, širina plošče: 1.000 mm, številka stroja/vozila: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package consists of four machines as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Max. panel length: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure system Panel support guides NC positioning Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically sequenced engagement NC unit positioning Unit 2: Double milling top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically sequenced engagement NC positioning Fgedpfx Aoy Ur Hljd Ieg Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/planing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Edge scraping blade NC positioning Edge processing unit 7: Glue scraping blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic Fgsdpfx Adoyg E R Ho Iog

Stanje: dober (rabljeno), Retro-reflective photoelectric sensor, photoelectric sensor Fodob A N Txjpfx Ad Isgg - 11–30 V DC - Price: per piece - Quantity: 5 available - Weight: 0.3 kg

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length Fgedpfx Aer Etuljd Iog - 3 extension mandrels included (Example photo)

Stanje: dober (rabljeno), Time recording device, terminal Fgsdpfx Adsb A Imtj Iog - Quantity: 1x time recording device available - Price: per unit - Includes Datalogic Touch 90 handheld scanner